Dropping non-accessible repository

Hi, is there any workaround to delete a repository on OracleVM Manager 3.0.3?. Currently we lost a LUN so the repository won't come back to life, OVMM complains about it not being presented to any host when a delete operation is tried.
Any suggestions?

Thanks for the reply.
Why am I dropping the repository? - Our current Oracle installation was performed very recently by a consultant who has never used EM before and was not familiar with it. After doing a little bit of research about how to maintain oracle, I went through a series of events to start and run dbconsole. When I told him about this he shrugged his shoulders. This guy has since gone back to wherever he came from and left me holding the bag.
When I try to start dbconsole I get an OC4J Configuration Issue Error. The listener is started and ports are assigned in the portlist.ini file. The sysman user exists which leads me to believe that the current EM configuration is not correct.
After trying to run EMCA, I get an error which tells me that the repository already exists.
Thank you for your concern and I acknowledge the fact that this could be potentially dangerous.
Do I need to drop the repository or is there a way to repair/reconfigure the existing EM?
It is my humble opinion that the dbconsole service is pointing to the wrong server in that all of the relevant parameters like...
"oracle.sysman.emSDK.svlt.ConsoleServerHost"
and
"oracle.sysman.db.isqlplusWebDBAUrl"
...all refer to a server which is NOT and does not have the database server.
Thanks again for your reply and I look foreward to hearing your reply.
Cheers.

Similar Messages

Dropping the EM repository hangs

Hello,
Im trying to recreate the database control for OEM but it hangs to the point on dropping the EM repository. heres the process goes
$ emca -config dbcontrol db -repos recreate
STARTED EMCA at Apr 24, 2007 8:25:29 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: PRD
Database Control is already configured for the database PRD
You have chosen to configure Database Control for managing the database PRD
This will remove the existing configuration and the default settings and perform a fresh configuration
Do you wish to continue? [yes(Y)/no(N)]: Y
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /oracle/oraprd/prddb/10.2.0
Database hostname ................ fmsdbprod.bayan
Listener port number ................ 1521
Database SID ................ PRD
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
Apr 24, 2007 8:26:04 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /oracle/oraprd/prddb/10.2.0/cfgtoollogs/emca/PRD/emca_2007-04-24_08-25-29-PM.log.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.PortManager isPortInUse
WARNING: Specified port 5540 is already in use.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.PortManager isPortInUse
WARNING: Specified port 5520 is already in use.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.PortManager isPortInUse
WARNING: Specified port 1158 is already in use.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Apr 24, 2007 8:26:11 PM oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
it stop up to here i leave it for two days but nothing happens.
Background:
Im trying to activate the OEM in a cloned environment. Since this environment is cloned the OEM instance that it gets is still the previous one.
Hope you can help me on these

Heres my procedure in bouncing the database
Shutdown includes the e-business suite application then the database
@appsprod server
su - appprd
adstpall.sh apps/apps
@fdbprod server
su - appprd
adstpall.sh apps/apps
====================================================
su - oraprd
addlnctl.sh stop PRD
addbctl.sh stop
startup FMS Prod including the e-business suite application
@dbprod server
su - oraprd
addbctl.sh start
addlnctl.sh start PRD
su - appprd
adstrtal.sh apps/apps
@appsprod server
su - appprd
adstrtal.sh apps/app
still the same output hangs on
Apr 28, 2007 12:54:38 AM oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
whats next? sorry for the trouble. Thanks

CDR-20043: Non-versioned repository has no workarea or insufficient privileges

After Installing Designer 6i on NT 4.0 service pack 6
and after I created the Repository
Running the Designer produce this error:
CDR-20043: Non-versioned repository has no workarea or insufficient privileges
all privileges from check requirments are Ok!
Please Help..........

Hi,
You may want to try enabling version support in the Repository.
From the RAU, choose Options->Enable Version Support...
Brian

Forest Root non-accessible\Child Domain still accessible. Can I recreate Forest Root and create Trust to current Child Domain?

Hi,
The 2 DCs for our Forest Root took a hit and are non-accessible, however the Child domain is still accessible. Can I recreate the Forest Root from scratch and Trust/Link to current Child Domain? So Im looking for my options to keep an accessible
Child Domain, but recreate a new Forest Root cause the current one is inaccessible.
Thanks for your help! SdeDot

Hi,
Would you please tell us that what do you mean by they
are non-accessible?
Are you able to log onto any of the two DCs in the forest root domain? If yes, we can use dcdiag.exe to analyze the state of the dc in the forest root domain.
If you have any system state backup of the DCs in the root domain, please restore the DC from backup.
Best Regards,
Erin

BIOS non accessible after installing W10 x86. Serious Issue.

Potentially a serious issue.
From a "cold boot" (following a previous shutdown command) the BIOS is non accessible. The actual clickable text of "Press F2 to enter set up" is missing. This means that no recovery of this PC exists such as booting from
a Windows disc or other bootable media.
Fortunately, providing you can boot into W10 and do a restart, then the BIOS options appear.
This means that if Windows didn't boot into Windows your PC could well become a brick.

I hope I can help you about. I've note a funny thing on my PC: I have installed Windows 10 on a spare HDD, clean install on new formatted disk, without any other HDD inside. Later I've "shut down", unplugged all cables and removed
from PC the Windows 10's HDD. I have then rebooted my PC on my usual HDD, it was telling me when pushing the power-on button "stepping out from hibernation". I've seen ~ this before in 7 and 8 installations (only). Not a BIOS/PC/HDD problem for sure.
Maybe you have already done that before, sorry if my message is giving too much details, but I wouldn't want that you break something down on the process :-)
Try to follow those steps in this order:
1 - Remove all the medias connected (USB keys, CD, external HDD etc.).
2 - Plug off the power cord, remove the battery, remove the HDD (usually is easily accessible from one side or from down-side of your laptop), wait for 4-5 minutes, then put in the battery (or the power cord) and try to power on your laptop
without any HDD, USB key or DVD.
Normally you should see the BIOS as usual, it will announce you that you have no boot media, or that there is an error and default settings were loaded. If so, power off, disconnect power source (cord and battery), plug in the HDD and
restart the computer. If it's again blocking your bios, return to step 2 for removing the HDD. You may consider to thoroughly cleaning your HDD (including the MBR, formatting will not clear everything out, rather delete the partitions, re-create them, re-format).
If 1 and 2 don't change the state of your BIOS, the error it's not connected with your HDD/OS installed. It just happened that starts just after you installing a new OS.

SAP CLM - Dropping "None" from value list

Hi all,
The value lists created have two basic options - Yes and No. But by default "None" appears when value lists are mapped to a field i.e., when we view the filed in "Create Contract", the field defaults to none and gives an option to select Yes or No. How can we drop "None" which gets defaulted by itself? Instead it should appear blank.
If there are any suggestions, please help us.
Regards,
Karthik

Hi Karthik -
You cannot remove "none" from the value list.
One possible workaround I have seen some customers use is to "rename" the none to some other value. This has the affect changing the value in every value list used in the system. For example, I believe one customer changed the value to "select...". Would something like this work for you? This change can be made by changing the localized resource (Setup > System Setup > User Interface > Localized Resources). The localized resource to change is "bundle = cterms" and "id = cterm.none". Obviously, the value you should be updated for any language packs also installed.
I hope this is useful.
Thanks,
Rob

Dropping Non-System Users

I've been looking at our Oracle database here in the office and it seems it's been some time since someone sat down and wore a DBA hat for some maintenance and much needed clean up. I was going to start and remove the user roles and assigned schemas for all non-system accounts that had no tables and or data in it. I was wondering how I can tell the difference between a Oracle required system user needed for RDBMS operations or if it was a post install added user / role / schema? Just trying to pro-actively clean up and remove the clutter. Before any changes were made to this system, I used RMAN to create a complete full backup of the entire system state & data.
Thanks for any info and or help!

I was going to start and remove the user roles and assigned schemas for all non-system accounts that had no tables and or data in it.What if it is a database account that, although not owning any objects (tables) in the database, has been granteed access (SELECT , INSERT/UPDATE/DELETE) to another schema's objects ? This non-owning database account might be in use for a particular application or user.
This :
select username from dba_users
where username not in (select distinct(owner) from dba_objects);will list database accounts that don't own objects.
You must be careful not to drop pre-seeded accounts that may not be owning objects but may be needed for various database functions.
Similarly, you must be careful not to drop accounts that are used by applications to access data in other schemas.
Hemant K Chitale

Bouton Ok de l'avertisseur de navigateur non accessible au clavier.

Bonjour,
Le bouton Ok de l'avertisseur de navigateur non reconnu, qui s'affiche à l'écran au lancement, n'est pas accessible au clavier.
Comment le retirer ou le rendre accessible ?
Merci de votre aide.

Bonjour,
Je n'avais pas vu votre réponse. Pardon de cette non réactivité.
Oui je parle bien de la popup qui apparait lorsque je lance le module sous Firefox.
Cette popup est inaccessible au clavier donc à partir du moment où elle se met en place, plus de possibilité d'aller plus loin.
Je cherche non pas à la supprimer car elle a un objectif de conseil mais je veux rendre le bouton atteignable et cliquable.
Je fais attention aux réponses maintenant.
Merci.

Drop/non-drop frame default

Is there a default setting for drop frame/non-drop frame in FCP?

Depends on the Easy Setup you use...and the format of video you are cutting.
DV defaults to Drop Frame. As does DV50 and uncompressed 8-bit and 10-bit. Because typically people need to deliver drop frame masters.
HD formats default to NON drop frame, like DVCPRO HD and Uncompressed HD formats. Got me why they do this, as HD decks do indeed still have drop frame modes. Makes timing a show properly a bit of a task.
Shane

Capturing drop & non + combining the two in a FCP project

First off, please excuse what I'm sure are pretty 101 type questions, if you could please shed some light on this I'd appreciate it. I'm capturing a series of NTSC DV tapes in FCP 6 in which some appear to have been shot at 29df and others at 29ndf, so these are my questions:
1) It doesn't appear that upon capturing, FCP allows you to make a choice between capturing 29.97df or 29.97ndf, it just has 29.97 period. Does this mean it looks to the code on the tape to decide whether it's drop or non-drop?
2) Are there any potential issues in combining drop and non in a single timeline as long as they're both 29.97?
3) If I know I'm never going back to the tape again and my new master is my capture, is there any issue in forcing the clip to have non-drop code in Modify>Timecode to keep it consistent with the 95% of my other footage which is non-drop?
Thanks, I really appreciate the help.
Roert

No problem. It's a rather confusing subject.
Answers:
1. Yes, it looks to the code on the tape. Every frame on the tape already has a number assigned to it whether in drop or non-drop form. You really wouldn't want FCP to just make up numbers; you wouldn't be able to re-capture otherwise.
2. You shouldn't have any problems with combining the two. It's just a way of counting frames. Nothing else.
3. If you aren't going back to tape, you could modify the code, but why? It won't make any difference in your editing. Again, it's just a way of counting frames.

How do delete non-existing Repository

There was a repository with a server and some VMs. I accidentally destroyed the LUN holding that storage. How do I clear it from VM Manager's display? I need to recreate the server pool, repository, discover the host, and I'd like to use the same names and IP addresses. I can always uninstall/reinstall manager, but that seems a bit harsh.
Oracle VM 3.1.1 Manager and a single, non-clustered host.

Hi, out of curiosity, I just ran the script on my test environment that has currently no errors. Is this what the output should look like? Tehre was no questions...
[root@ovmmgr-ec bin]# ./ovm_upgrade.sh dbuser=ovs dbpass=Oracle34 --fixup
find: /tmp/ovmpatches: No such file or directory
Copying xsl files to patch path location
`./transform_003000002000_010.xsl' -> `/tmp/ovmpatches/transform_003000002000_01 0.xsl'
`./transform_003000003000_010.xsl' -> `/tmp/ovmpatches/transform_003000003000_01 0.xsl'
Copying deleted classes files to patch path location
`./deletedClasses.xml' -> `/tmp/ovmpatches/deletedClasses.xml'
INFO (OvmUpgrade.java:117) Oracle OVM Manager Upgrade Processor
INFO (OvmUpgrade.java:118)
INFO (OvmUpgrade.java:326) Upgrade Initialization Starting
INFO (OdofDirector.java:219) Oracle Distributed Object Fabric (ODOF): Copyright (C) 2007, 2011 Oracle. All rights reserved.
INFO (OdofDirector.java:220) ODOF Version: 1.0.0.0
INFO (OdofDirector.java:221) Initializing...
INFO (OdofDirector.java:278) Initialization Complete!
INFO (OvmUpgrade.java:328) Upgrade Initialization Complete
INFO (FixupStage.java:23) Database Fixup Starting
INFO (ObjectStore.java:133) Fixing up Exchange... (2147 objects)
INFO (ObjectStore.java:144) Fixup has processed 1000 of 2147 objects
INFO (ObjectStore.java:144) Fixup has processed 2000 of 2147 objects
INFO (ObjectStore.java:252) Fixup Complete!
INFO (FixupStage.java:26) Database Fixup Complete
[root@ovmmgr-ec bin]#
Regards,
T

IPhone 6 Plus battery life seems to drop non-linearly

I'm not sure it's a problem yet or not, but I've been watching the battery life over this first day of use, and it is very non linear, even though use has been pretty linear.
For example, after the battery indicator dropped to 90% usage I calculated out how much the battery life would be at that rate and got like 19 hours!
But at 80% usage it dropped to 13 hours.
And so on... subsequent calculations have it multiplying out to 12.5 hrs, 12.3 hrs, 11.2 hours , 9.3 hours and now at 55% battery it multiplies out to 9.2 hrs.
I wonder why the more time passes the remaining percentage seems to drop at an accelerated, rather than a linear rate. Anybody have any ideas?
Thanks,
doug

The rate of battery loss is still slowly accelerating. At this rate I expect less than 8 hours usage time.
I wrote a review of my new iPhone 6 Plus here and brought up the issue:
http://lerner.net/dougs-review-of-his-new-iphone-6-plus-first-day-impressions/
If anybody has any ideas, or comparative battery life results, please let me know.
Thanks,
doug

Copy, Move, or XML import drops non 1080p clips with no warning

What are the limitations on moving, copying, or exporting/importing XML?
It seems that FCPX dropped all my clips that are not 1080p. And to make matters worse, FCPX went through the motions like it was moving/importing, but ignored the clips that were not 1080p and gave me no warning. So I worked on the project for 2 days only to discover that part of the clips were missing.
Has anyone else found this problem or do I have a configuration problem.
I have some Gopro video and timelapse that are large frame sizes, 2.7k and whatever the medium timelapse stills were set to. These are the problems.
This seems to work with XML on the same computer, but when moving to a second computer is were the problem comes in. The move/copy either events or clips dropped all my odd sized video clips, even on the same computer. Again no warning.
You can import the original clips but not copy, move, or export/import XML to another computer. I thought XML export was the recommended way of working in a distributed enviornment with FCPX 10.1?
Configuration:
2 computers
both OSX 10.9.2
both FCPX 10.1.1
all media is external to the libraray, so it needs to be re-linked when moved.
It does appear that if I copy the library to the other computer that everything is OK, but not with XML.
Should export/import XML work with non-standard frame sizes? It would seem that if you can import the original clip, that you should be able to copy, move, export/import XML.
Rick

Thank Louis for the reply.
My problem is not the media, but clip instances. I have the media on both computers. For some reason the unlinked images are not loading accept for the 1080p. When the clips show up, I can re-link them without problems.
I re-ran the XML import/export between computers, doing a complete round trip. This time it worked! I apparently am having a repeatability probelm, so I have some more work to do.
However when I did a Copy event to Library command, only the 1080p clips appeared.
Any suggestions on how to make this more repeatable? Like emptying a cache or something.
BTW the clips that were dropped are 2704x1524 - would that make any difference?
Rick

Non-accessible iPhoto DVD

As a backup measure, I burned a DVD from the iPhoto Library on my aging MacBook. Yet, none of my drives allow me to open the file (group of files?) on my Mac mini. The message states that the file is locked and to return when it isn't any more, or to chose another library. This is where I'm stuck: I'd like to access the images on the DVD and transfer them selectively in order to make a book of my late and lamentably departed cats. I'd appreciate any help or pointer.

You need to drag it from the DVD to a hard drive. A backup iPhoto library on DVD is exactly that: a backup. Until copied from the backup drive, it can't be opened in iPhoto or changed.
(61997)

Non-accessible signature in Reader

I created a document in Adobe XI Pro using Word 2007. At that time, all the fields (including signatures) in the form worked fine. We have since upgraded to Windows 8 and now the signature boxes are not fillable in reader. I have recreated the form in Pro with no security issues and signatures can be inserted. As soon as I go into Adobe Reader XI, I can no longer complete the signature field.
Document Properties in Pro all come up as 'Allowed', but when pulling up the document in Reader, it indicates that Document Assembly, Page Extraction, and Signing are 'Not Allowed' even though the Security Method states "No Security".
How can I make the signature lines accessible for insertion of the electronic signature in Reader?
Thanks!

I found the resolution to this and thought I'd share. I had to extend the version of the original PDF file. Once that was done, I was able to sign in Reader.
Hope this helps everyone.

Dropping non-accessible repository

Similar Messages

Maybe you are looking for