Dropping out when on skype

i am talking on skype and not usin video,we are boyh just talking only and my computer is dropping out when talking and i go offlinr and online and loose my call and constanly have to wait yill i come online again.Why is this happening? I have changed to Optus snd havent had problemd until nos eith this...Is there anyone who can help me here..finally i can chat for nothin and this happens..my mic and earphones seem fine and use no video...help plz

Not sure about the power issue but USB modems are known for problems.
An Ethernet modem is not supported by your ISP?
I would make the switch to an Ethernet modem if possible.

Similar Messages

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

Gradients dropping out when opening PDFs in Illustrator

Hi everyone. I work for a large format printing company. We receive thousands of files every year from many different designers. We started to notice that gradients would drop out of some PDFs when opening them in Illustrator but they would preview fine when opened in Acrobat. I searched high and low for an explanation for this glitch. The only response I received is "Stop opening exported PDFs in Illustrator." This is an unsatisfactory answer for someone that needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue. The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
Workaround for 1 Spot Color in Gradients (Converts Spot Color located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the Spot that is located in the Gradient in Color Spaces then click ok
Save the PDF
Workaround for 2 Spot Colors in Gradients (Converts Spot Colors located in Gradient toCMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the DeviceN spot color that is located in the Gradient in Color Spaces then click ok
Save the PDF
Please test it and let me know if you run into any issues with these workarounds. I'm always looking for new problems to solve!
- Jenny

you said--"...needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue"
Your workarounds seem time consuming and (possibly) unnecessary for the following reasons:
1. large format printers use 4-8 colors to achieve color (so spot colors shouldn't be an issue)
2. Acrobat Pro has it's own 'preflight' function that works fairly well
additionally (don't know if you know this) there is an add-on to acrobat called 'Pitstop' (google it) that allows just about any change/correction/alteration to be made to a PDF
...and...opening a PDF in illustrator (that wasn't created in illustrator--do you know how to determine this?) can lead to many problems i.e. gradients dropping out, text reflow, etc.
as far as testing your workarounds, seriously, who has the time when there are tools available that make using them unnecessary (this assumes that you have created these 'workarounds' to match your worflow--but a nearly pure PDF workflow should work in this day and age, depending on your RIP and software).

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

Try:
ipod touch wont remember wifi password: Apple Support Communities
Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Exsternal harddrive drops out, when using adobe premiere pro cs5. Cant load projects. any one had this problem or the answer to it?

I have two WD external hard drives that i keep all my video files, music and adobe premiere pro cs5 projects on. Up until 2 days ago they were working perfect, now they drop out when i try and load my projects from them, or watch a movie from them. tried restoring from two weeks ago and nothing changed. I get that error msg when i try and load something. The error msg is the one that comes up when you disconnect a usb drive without ejecting it correct. I don't think its the drives as i only use one most the time, and the other just sits there not connected, but that are now having the same issues. Help me plaza

yea i am using the right sequence
here are 4 screen shots of 2 different things i was editing, both used to record my xbox 360 with Hauppauge, Seems adobe is the only program playing the video file with the audio out of sync/mixed up
[URL=http://imageshack.us/photo/my-images/803/screenshotlrh.png/][IMG]http://img803.imageshack.us/img803/1669/screenshotlrh.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/826/screenshot2yv.png/][IMG]http://img826.imageshack.us/img826/3012/screenshot2yv.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/841/screenshot3aa.png/][IMG]http://img841.imageshack.us/img841/7042/screenshot3aa.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/5/screenshot4on.png/][IMG]http://img5.imageshack.us/img5/6096/screenshot4on.png[/IMG][/URL]
The Yellow Devil May Cry video is the video with the audio problem,
The metal gear rising video is red because of the pic above it, and the sound works ok on that, infact that video is finished and uploaded to youtube now.

ADSL Broadband keeps dropping out when trying to u...

Hi, hope someone can offer some advice please.
Our connection seems to have got a lot slower over the last few months (about 2.64 on a very good day) and now keeps dropping out when trying to use either the laptop or PS3. I have followed the advice on the self help guide and tried changing the ADSL filter, moved the hub away from the telephone, re-booting the hub and tried using it directly in the test socket and none of these have solved the problem. I have done a line test from work and it says there are no problems with the line??? I am getting really annoyed as we only have the phone line so we can use the internet so are paying over £40 a month for service we cant even use. I get the impression that as there are so many users on ADSL where I live (we dont have fibre optic yet) that it is too much for the exchange and that BT are upping peoples connections when they complain thus making other peoples worse (we had this problem about a year ago and complained and it was ok for a while)
Could this be true? Or am I just thinking too much in to it? And does anyone have any suggestions on how I could resolve the problem? I have had a bad experiance with being charged for an engineers visit in the past (eventually refunded) so would like to avoid having to get them involved if possible.
Thanks in advance.

you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Tables dropping out when saving PDF files

I have saved a document through writing to PDF in the Print dialog and also by exporting as PDF, but with the same results. In a 40 page document 3 of the tables get dropped out when saving so all I get is blank space where they should be.
Perhaps related is an interesting printing problem. When I print the entire document these same three tables are missing. But if I go back and print only the pages they appear on then the tables will print.
Any suggestions?

Happens with a Konika-Minolta Magicolor, a Brother 1470-N and an HP Laserjet.

Why does my email drop out when I access my group contacts list

Why does my email drop out when I access my group contacts list

Hi Helen
I think (from the other forum you posted to previously) that you are asking how to send email to a group in your address book, or other group of email addresses? You will need a third party app to do this, a number of which are available from the App Store.
Our MailShot Pro app is unique, as it can turn addressbook groups into special contacts that you can use from any Mail-compatible app on your iPad (Such as Mail, Photos, Maps etc.) as though the ability to send to groups were built into your device.
You can find MailShot Pro here on the App Store
Peter
Soluble Apps
Full disclosure: I am the developer of MailShot Pro, and may receive financial benefit from its sale.

File Name Associations Drop Out When Changing Project Name

Posting on behalf of a colleague. He's using Robohelp X5 on a
Windows XP computer.
"We have frequent occasions in which we must take an existing
online help project (ABC_001, for example), make some
tweaks/additions/omissions, and release a revised online help
project (ABC_002). We have been cloning the existing help project
(ABC_001), renaming the project, making the necessary changes to
the help project, adding or deleting map IDs in .hh files as
necessary, importing revised .hh files as necessary, and then
releasing the project under the new name. We want to maintain map
ID numbers and assignments (25ANG1, Map #: 640, File name:
Synchronism Check#25ANG1) from ABC_001 to ABC_002, but the File
name associations drop out when we change the project name. It is
then a laborious process to go through the list and reassign all
the topics to the appropriate File names. Is there any way to
maintain topic labels with their map ID numbers and their File name
associations from one project to another?"
TIA

My colleague's reply:
"I discovered that it requires just one more step in the help
project before I can actually see the file name
associations/aliases again. I have to recompile, as Colum
recommended, but then I have to close down RoboHelp and reopen the
project. Then, if I am in Project View and navigate to
Context-Sensitive Help/Map Files/All Map IDs, I can see all of the
file name associations again. Thank you, Colum, for your
help!"

Why does audio drop out when scrubbing iMovie events?

Why. does audio drop out when scrubbing iMovie events?

If the audio returns if you slow down scrubbing you are probably just scrubbing too quickly.

HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
Help me out here, I can't be the only one with this problem.
Thanks.
-R

Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
Mike

My Apple TV drops out when my iMac isn't connected to wifi yet my TV is connected to wifi. Also having issues with losing settings on Home Sharing as well. How do I fix these issues?

Whether I'm watching a movie purchased via my Apple TV or a movie stored on my iTunes app on my iMac I'm having constant issues with Apple TV either cutting out (randomly - not related to wifi) or not being able to access the 'My Computer' files when my iMac drops out the wifi connection because its in power saving mode. I also have issues with 'Home Sharing' settings having to be reset and sometimes having to unplug the Apple TV power cord and plugging it back in to be able to successfully reset these settings so I can get back to watching whatever it was I was viewing on Apple TV. My TV is connected to wifi as well so I'm wondering if there are any changes I can make in the settings of both my Apple TV and iMac or TV so that I can just select whatever it is I want to watch and be able to watch the entire movie or episode without it dropping out or having to keep flicking the mouse on the iMac to keep the computer connected to wifi? I love Apple products generally but Apple TV is proving to be a pain in the a**e lately. Hopefully someone can help me sort these issues out

Intermittent issues will point to a local network/wifi issue.
Reboot ATV and router, make sure both are up to date
Try ethernet
The home sharing connection will cut out if the iMac goes to sleep.

Audio drops out when following video to external monitor

When I play a sequence to an external monitor, the audio drops out for 2 to 3 seconds after changes on the video track, and then pops back in with no interuption in video output. It doesn't happen at every cut, but it's consistent in the places it does. I thought it might be caused by the size the project has become. So I exported the sequence as a quicktime file, closed the lage project, opened a new one and exported the new file and played it and it happened again, even though there were no edits. It doesn't occur at all when I turn off external video, and play it on the computer. I connected a new firewire from the computer to my DV deck, restarted the computer, but it keeps happening.
Is it that the dramatic change in color, light and compostion crowding out the audios ability to follow the video through the wire?
I'm completely stumped. The next step will be to open the computer and try to blow any excess dust out. I do this periodically anyway, and my last time was two months ago, so I'd be surprised if it works.
Maybe the G4 with 2G processing power can no longer handle the program, but it shows no sign of stuggle in any other way.
My clients are starting to grow restless.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

Why do italics drop out when I copy text to Thunderbird messages?

Whenever I copy text to or from Thunderbird, attributes such as boldface and italics usually (but perhaps not always) drop out. I can always italicize text when It's in a message. What must I do to make copying already italicized text possible?

Whenever I copy text to or from Thunderbird, attributes such as boldface and italics usually (but perhaps not always) drop out. I can always italicize text when It's in a message. What must I do to make copying already italicized text possible?

Dropping out when on skype

Similar Messages

Maybe you are looking for