Drops in the viewer.

while im making subclips from the master clips i have sometimes drops in the image, but if i put the same image in the timeline then i dont have frames. so like this i never know if they are really there and have to check all the time. anyone knows why this happens? thank you.

sorry nick you re absolutely right, yesterday i was tired and english is not my best, for sure. Lost in translation is a great movie anyway.
ill try again, when im logging subclips from masterclips, sometimes i see ( in the viwer)some "drops" like if i was fast forwardind and then that makes me think that i have problems with that image, but then i drag it to the timeline the image has no problems.
thank you
If necessary ill do it in portuguese next time.
Best regards
Makk

Similar Messages

Hotkeys for Keyframe timeline centering in the Viewer ?

Hey all,
I'm trying to work with Keyframes in the Viewer. Problem is I can never zoom in on so I can see both IN & OUT keyframes. I'd like to be able to center the keyframe timeline kinda like I do the sequence timeline, ie.. SHIFT+Z
The keyframes just seem so cramped, especially the IN point.
Any tips ?
Thanks to all replies

Do you know that you can also drag any TAB from the viewer to the timeline. (It will only drop in the viewer if you drag the tab to the tab section of the timeline)
Once there it opens just like a sequence and you have the entire length of the timeline to work in where you can use the standard sequence "zoom in and out" shortcuts.
rh

A box with a blue outline appeared in my bookmark drop-down menu. I can't get rid of it, and it obstructs the view of the bookmarks as I scroll up or down. Help!

I was trying to bookmark a page, using the "Choose" menu in the bookmarks. I must have touched a key by accident, and a box with a blue outline & the name of one of my folders appeared in my bookmark drop-down menu. At first the box contained the folder name, then I was trying to delete the box, and erase the name, thinking it might get rid of the box, but it didn't. I can't get rid of this box! It obstructs the view of what is underneath. It stays in the same position as I scroll up & down in the drop-down menu, and it hides what is underneath. Please help me get rid of this box. It is driving me crazy! Thanks!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

I now get a blank (white) screen in the Viewer. Can still drop video from the viewer into the canvas, but don't see it in the viewer. Please help!

It doesn't seem to matter what project I'm working on... the picture in the viewer is gone. All I see is a blank (white) screen. If I put the cursor over the viewer and drag to the timeline, the clip will appear on the time line (and in the canvas) but I don't see it in the viewer. I usually edit my clips in the viewer and not on the canvas. Can anyone explain why this might be happening and how I might fix. I'm suspecting I must have messed up one of the settings but I'll be darned if I can figure out which one or how to fix. Please help!

David. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim

How to change the view criteria at run time for af:query

Hi,
I've a usecase where I need to change the view criteria of the af:query at run time.
Use case:
=======
1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees under dept 10. If user searches without selecting the check box, the results should show all the employees in all the departments.
2) I need to have a check box always in the query panel. Its mandatory.
The way I implemented:
==============
1) Created a transient variable 'Show Emps Under Dept 10' in the EmployeeVO and also created a bind variable bind_DeptNo.
2) Create a view criteria 'AllEmployees' which has only the transient attribute as the view criteria item and whose value set to 'false' by default.
3) Created another view criteria 'EmpUnderDept' which has 'DepartmentId' as the view criteria item and whose value set to the bind variable 'bind_DeptNo'.
4) Dropped the view criteria 'EmpUnderDept' as the 'af:query' panel in the jspx page.
5) Overridden the queryListener as '#{EmpBean.empSearch}'
6) Has the below code in the empSearch method as below. When user selects the check box, applying the other criteria 'EmpUnderDept' and setting the bind variable to '10'.
public void empSearch(QueryEvent queryEvent) {
// Add event code here...
QueryDescriptor queryDesc = (QueryDescriptor) queryEvent.getDescriptor();
ConjunctionCriterion conCrit = queryDesc.getConjunctionCriterion();
List<Criterion> criterionList = conCrit.getCriterionList();
List criterionValues = new ArrayList();
Object criteriaValue = null;
int criteriaNo = 0;
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesContext facesContext = FacesContext.getCurrentInstance();
for (Criterion criterion : criterionList) {
AttributeDescriptor attrDescriptor = ((AttributeCriterion)criterion).getAttribute();
System.out.println("============== attrDescriptor.getName() =================== " + attrDescriptor.getName());
criteriaValue = ((AttributeCriterion)criterion).getValues().get(0);
if(criteriaNo==0) {
Boolean val = (Boolean) ((AttributeCriterion)criterion).getValues().get(0);
if (val.equals(true)) {
OperationBinding method = (OperationBinding) ADFUtil.findOperation("ExecuteWithParams");
if(method!=null) {
Map params = method.getParamsMap();
//params.put(key, value)
method.getParamsMap().put("bind_DeptId", 10L);
method.execute();
ADFUtil.invokeMethodExpression( "#{bindings.EmpUnderDeptCriteiaQuery.processQuery}", queryEvent);
} else {
//ADFUtil.invokeEL("#{bindings.ExecuteWithParams.execute}");
ADFUtil.invokeMethodExpression( "#{bindings.AllEmployeesCriteriaQuery.processQuery}", queryEvent);
But this approach is not working and its always showing all the employees in all the departments.
Please let me know if there is a way to change the view criteria at run time depending on the values set at run time for one of the view criteria items.
JDev version am using is '11.1.1.5'
Thanks,
Lakshman

Hi Shay,
It worked for me without overriding the executeQuery() method in the ViewImpl.java.
Instead of creating 2 view criteria, I created only one which has both transient variable and the DepartmentId = <bind_DeptId>. With the above code, it worked properly. Now I am using only one view criteria.
Thank you.

How to add a button in the view at a specific position

Hi Gurus,
We have a requirement :
To add a button or image at a specific position in the view which is like an indicator showing different color
based on another field .
Example :
Adding a button next to a drop down flield and changing the color of the button based on the name of the color choosen in the drop down .
or Adding an image which can be changed based on the dropdown value or the value entered in the input field .
Thanks ,
Naval Bhatt.

Hi,
Create an Attribute ZINDICATOR , in the same context node in which the dropdown(picklist) attribute,exists.
Let it be a CHAR 1 field.
Implement GET_P and GET_ method.
Pull this field beside the dropdown fields in view configuration.
Now the code =>
Implement the Get_P_ZINDICATOR for this attribute as explained by Robert
Implement Get_ZINDICATOR method as follows
DATA:
     lr_current   TYPE REF TO if_bol_bo_property_access,
     lr_entity TYPE REF TO cl_crm_bol_entity,
     coll      TYPE REF TO if_bol_entity_col.
lr_current ?= collection_wrapper->get_current( ).
IF lr_current IS NOT BOUND.
   value = cl_thtmlb_util=>get_icon_url( 'check_empty.gif' ).
   RETURN.
ELSE.
   dref = lr_current->get_property( 'ZINDICATOR' ) .
ENDIF.
IF dref IS NOT BOUND.
    value = cl_thtmlb_util=>get_icon_url( 'check_empty.gif' ).
    RETURN.
ENDIF.
TRY.
    value = if_bsp_model_util~convert_to_string( data_ref       = dref
                                                                            attribute_path = attribute_path
      IF value IS INITIAL.
        value = cl_thtmlb_util=>get_icon_url( 'check_empty.gif' ).
*      ELSEIF value EQ 'R'
*        value = cl_thtmlb_util=>get_icon_url( 'check_overdue_status.gif' ). " gives RED LIGHT
      ELSEIF value EQ 'Y' .
        value = cl_thtmlb_util=>get_icon_url( 'check_due_status.gif' ). " gives YELLOW light
      ELSEIF value EQ 'G'.
        value = cl_thtmlb_util=>get_icon_url( 'check_nodue_status.gif' ). " gives GREEN light
      ENDIF.
CATCH cx_bsp_conv_illegal_ref.
      CLEAR value.
      RETURN.
CATCH cx_root.
      CLEAR value.
      RETURN.
ENDTRY.
Generally check_overdue_status.gif and other images are std. and are present in all skins.
You need more colors then you have to add those images in the MIME repository in the images folder of the SAP SKIN folder.
You must implement the eventhandler for Dropdown field. For this in the GET_P method of dropdown, use
CASE iv_property
WHEN if_bsp_wd_model_setter_getter=>fp_server_event.
      rv_value = 'COLOUR_SELECTED'.
ENDCASE.
and then implement the event handler EH_ONCOLOUR_SELECTED.
In this event handler, you must set the ZINDICATOR value as ' ' , 'R','G','Y' etc depending upon what is selected in dropdown.
This ensures that a server roundtrip is triggered and so the GET method of indicator field is called as soon as dropdown value
is selected.
Hope this helps.
Thanks & Regards
Suchita

How to get the view Object in UserDefined Action

Hi All,
Any body tell me how to get the view object , like the view object avilable in the wdDoModifyView() method as parameter.
I have requirement like, i want to change the , no of rows displaying in the table should be changed at the runtime based onthe no of rows selected in the dropdown box.
The action which i created will be assigned to that dropdown box, on select of the available option, i will get the view object and change the properties of the "maxrows" of the table .
so for getting the view object in the the Action methods tell me what is the procedure for getting the current view object.

Hello Vishal,
Simply create a value attribute (say rowCount) of type 'integer' and bind it to the 'visibleRowCount' property of your table. Then, in the actionHandler get the value from the UI element (in your case, I guess it is drop down) and set it to the attribute 'rowCount' like this.
wdContext.currentContextElement.setRowCount(
wdContext.current<nodeElement>.set<AttributeBound toDropDown>);
Bala

Every time I open Firefox 8.01, on my WinXP laptop, the "bookmarks" toolbar disappears but the checkmark in the view/toolbars menu is still checked when I reopen it, just no bookmarks toolbar showing on screen, Is There A Fix For This?

I've tried everything including reinstalling Firefox. It began after a new WinXP update. If I go into the view file and uncheck, then check the bookmarks toolbar it shows up and functions fine but to have to do this every time I open the browser is annoying and it just started happening

Hi,
The "Tools" are in the old drop down menu, which are not shown by default in the new Firefox Design. To show this menu:
Firefox Menu > Customize
On the bottom left there will be Show/Hide Toolbars. The Menu will be listed here.

How do I clear the " view all files " history in Adobe Reader XI I have recent files set to 1 "View all files " shows all files from 22 june to current date

as i indicated in my question I'm having a problem clearing the " view all files " history in Adobe Reader XI

My current Ver is 11.0.07 and the"view all recent files" selection is found by clicking on file and in the drop down menu it is the selection just above the list of recent files

Can't drag and drop from page view

Can't drag and drop from page view to desktop even though plus icon shows up for duplicating the page. On Mac 10.9.2 Acrobat XI. I don't want to extract through the menu and associated dialogues. Its slow and cumbersome.

Hi Peterbruce,
Acrobat for Windows will let you select pages in the Pages panel and drag them to your desktop, but that isn't an option in Acrobat for Mac OS. You can drag thumbnails from the Pages panel in one doc, to the Pages panel in another, however.
Best,
Sara

Strangeness when playing the viewer backward

When shuttling backwards only in the viewer, the FCP screen will shutter, reverse colors and drop the right half of the frame. The FW out is fine. Doing the same in the viewer/tiemline the problem doesn't exist.
I asked the previous user of this computer (was a hand-me-down) if he had that problem. He didn't think so, but he wasn't sure as he didn't shuttle backwards much in the viewer.
The computer had a few changes when I acquired it. It originally had second internal drive and I now have a FW800 drive on it.
I loaded up a project off of the internal and it did the same.
The other is that it had 2 VGA monintors (output 1 on card had ADC to VGA adapter and the second output had a DVI to VGA adapter).
I now have 2 20" cinema displays, output 1 with a ADC to DVI and the second is straight DVI.
I tried placing the viewer on the other screen and it does the same.
Any ideas would be great.

Out of curiosity, what kind of media are you using?
Patrick
EDIT: You must be using DV if you have FW out. Hmmm... I don't know what is causing it, but someone else recently reported a rewind problem...

An error prevented the view from loading

I'm using SQL Server 2012 Express and I'm building a report with one table. I dragged and dropped two data set elements into the table that has two columns (Product Name and Product Description). Both the dataset elements have
a data type of varchar (50) in SQL Server 2012 Express. The table with those two elements is the only data I have in Design view. When I click on Preview, the Preview screen states 'An error prevented the view from loading.'. This is difficult
to diagnose, because in the Error List there are '0 Errors', '0 Warnings', and '0 Messages'. I would like help understanding if there is another error log I can observe to understand the issue, or if there are basic SQL Server 2012 Express Reporting
Services debugging techniques. Please help. Thank you,
Additionally, when I run the query in SQL Server 2012 Express and Reporting Services Query Designer the query results are correct.
Also, when I click the start debugging button, the report displays and I can export it to pdf, however the Previous still displays the error.

Well, funny stuff. I shut the solution down yesterday, then I booted my computer today and started the solution AND JUST LIKE MAGIC....it works. I can't explain it. Persistence pays, that's the answer sometimes.

How to export all the views in one schema?

Hi,
I have more than 1000 views in one shcema.
How to export all the views in one schema?
Amy

Hi,
It's not a very easy question, I have develop a script wich create a script to create view from old database to new database :
/* &1: Oracle SID Source
/* &2: Oracle Schema Source
SET HEAD OFF
SET VERIFY OFF
SET PAGESIZE 0
SET LONG 40000000
SET LONGCHUNKSIZE 2000
SET LINESIZE 2000
SET FEEDBACK OFF
CREATE TABLE RECREATE_VIEW(VIEW_NAME VARCHAR2(30), TEXT LONG);
/* Selection du texte de la vue */
DECLARE
w_text long;
w_text_debut long;
w_text_column long;
w_view varchar2 (30);
w_schema varchar2 (8):='&2';
CURSOR w_cursor IS
SELECT a.view_name, a.text
FROM dba_views a
WHERE a.owner = w_schema;
CURSOR w_column IS
SELECT DECODE (ROWNUM,
1, 'CREATE OR REPLACE FORCE VIEW ' || '&' || '1..'
|| a.table_name || chr(10)
|| '('
|| a.column_name
|| DECODE (ROWNUM, nbcolumns, ')' || chr(10) || 'AS' || chr(10), ',' || chr(10))
FROM (select column_name,table_name
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
order by column_id ) a,
(SELECT COUNT (1) nbcolumns
FROM dba_tab_columns
WHERE owner = '&1'
AND table_name = w_view
GROUP BY owner, table_name) b
order by rownum;
BEGIN
OPEN w_cursor;
LOOP
FETCH w_cursor INTO w_view, w_text;
EXIT WHEN w_cursor%NOTFOUND;
w_text_debut := NULL;
w_text_column := NULL;
OPEN w_column;
LOOP
FETCH w_column INTO w_text_column;
EXIT WHEN w_column%NOTFOUND;
w_text_debut := w_text_debut || w_text_column || ' ';
w_text_column := NULL;
END LOOP;
CLOSE w_column;
w_text := w_text_debut||w_text||';';
insert into RECREATE_VIEW(VIEW_NAME, TEXT) VALUES (w_view, w_text);
COMMIT;
w_text := NULL;
w_view := NULL;
END LOOP;
CLOSE w_cursor;
END;
SPOOL scripts_views_&1..sql
PROMPT SPOOL scripts_views_&1..log
PROMPT
SELECT TEXT
FROM RECREATE_VIEW;
PROMPT
PROMPT SPOOL OFF
PROMPT
SPOOL off
PROMPT /* Formattage du fichier SQL */
!sed 's/[ ]*$//' scripts_views_&1..sql > aprilia.tmp
!rm scripts_views_&1..sql
!mv aprilia.tmp scripts_views_&1..sql
DROP TABLE RECREATE_VIEW;
EXIT
I hope that help you.
Nicolas.

How to change the Views or Pop-ups?

Hi All,
I have a huge user interface with many views and pop-ups, and want to know what is the best method to make changes to them.
I need to add or change input fields in the views, but some of the fields are not yet available from the RFC models. Therefore, in this case, is it acceptable to use Apply Template (even though some fields are not be available) or should I create/change the ui elements individually or manually change their properties? Would the second option, which is to manually create/change the input fields on the screens, be acceptable practice?
Also, how should I go about re-arranging or re-aligning the buttons, check boxes, etc? I have tried drag-and-drop, but it is very difficult to line things up. Is there an easier way?
Thanks so much for your help.

I have not receive a response.
My question is, if I make changes to my views WITHOUT using Apply Template, will that pose a problem later on when I do the binding against the new fields that will be coming from the RFC model?
Is it necessary to wait until the RFC model has been updated with the new fields before proceeding with the changes to the screens?
The reason I'm asking is because in the interest of time, the client has asked me to complete the screen layouts first. Then the bindings can take place later once changes to the Remote-enabled Function Modules (adaptive RFC) have been completed. What is the common practice in this case?
Please offer your expert advice as this is urgent.
Thanks so much.

Dropped Frames in Viewer, and Hard Disk Questions

Hi,
I'm new to FCE (v3.5.1) having just upgraded from iMovie. I'm on a 2GHz Core Duo MacBook with 2GB RAM. I have a 120GB internal drive that has 16GB free. In my initial use of FCE, I've run into two problems.
(1) I'm finding that frames are regularly dropped during playback in the Viewer - as much as half the time. The same video clips playback flawlessly in iMovie and in Quicktime. These frames are on my MacBook's internal hard disk and are each roughly a minute in length.
I should note that these clips were exported from iMovie (I copied them out of an iMovie project file / package). Might this be causing the problem?
(2) Also, I'm finding that the audio playback of these clips (that were copied from the iMovie package) is okay in the Viewer but not in the Canvas (I hear beeping) -- I found mention that the audio format of iMovie and FCE are different, so I expect I need to reimport these clips anyway. Is there an easy way around this?
(3) I know I said two problems, but number 3 is a question, not a problem! Given my hardware setup described above, should I be able to get away with working with the clips located on an external Firewire hard disk? Or should I only work with clips located on my internal drive. Similarly, can I effectively work with a scratch disk that is external FW, or should I keep that on my internal drive?
Thanks in advance,
Tim

(1) I'm finding that frames are regularly dropped during playback in the Viewer - as much as half the time. The same video clips playback flawlessly in iMovie and in Quicktime. These frames are on my MacBook's internal hard disk and are each roughly a minute in length.
Need to know info more about the clips from iMovie.
Clips coming into FCE need to match the Sequence settings. This is set up before a Project begins using the Easy Setups. My guess is there is a mis-match.
2) Also, I'm finding that the audio playback of these clips (that were copied from the iMovie package) is okay in the Viewer but not in the Canvas (I hear beeping) -- I found mention that the audio format of iMovie and FCE are different, so I expect I need to reimport these clips anyway. Is there an easy way around this?
The work around is to render, Command+R or Sequence>Render All from the menu.
iMovie uses DV Stream and is a multiplexed format whereas FCE uses DV. The QuickTime files that FCE likes has the audio seperate from the video allowing them to be edited with or without the video.
3) I know I said two problems, but number 3 is a question, not a problem! Given my hardware setup described above, should I be able to get away with working with the clips located on an external Firewire hard disk? Or should I only work with clips located on my internal drive. Similarly, can I effectively work with a scratch disk that is external FW, or should I keep that on my internal drive?
Using FCE an External firewire is a much better option than your internal.
Search this forum for Canon/LaCie, most users get in strife with this combo. Most other stuff seems fine.
Before unloading $$ it's always best to do a bit of checking around.
Al

Drops in the viewer.

Similar Messages

Maybe you are looking for