Dropshadow problem when i save cs4 file to cs3

when i save Illus CS4 to CS3, pixels in shadows of elements are broken . i dont know how to fix >"<

yes, now i am at home, i keep my files in company computer, tomorow i check it again. Thank you for your help

Similar Messages

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier.  What can I do to fix this?

    I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier.  What can I do to fix this?  I have tried to figure out how to chat with someone at Adobe, but they certainly don't make it easy to do.  At the moment, this program is useless to me.  Very depressing....

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    I am not aware of a field type "Help" within a PDF form. I do not see it as a form field that can be added in the form edit mode.
    Forms Central forms do not support all the features of Acrobat forms.
    Are you talking about the "Tool Tips" or a hidden field that only shows when one enters a field and is hidden upon exiting the field.

  • I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
    Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
    If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

  • Photoshop crashes when I save a file

    When I save a file in Photoshop, sometimes it saves it and other times it crashes and closes the program and does not save the file. Any fixes or suggestions?
    Thanks,
    Tim

    Need a lot more info..
    LenHewitt, "How To Get Help Quickly" #, 4 Mar 2004 7:27 am

  • When i save a file on Photoshop the color turns darker.

    Hi everyone,
    I have CS6 and when i am working on Photoshop the color is fine and everything shows up how i want. Although when i save the file to a .jpeg the color drastically darkens to a point all my lighter details are lost. I tried emailing the .jpeg and .psd to another computer in my house and it works fine on them.My color settings currently are set to North America General Purpose 2 with sRGB selected. Past this point i don't really know what to try, if anyone has any suggestions on how to resolve this issue fire away please.

    Photoshop is a color managed application, and uses icc profiles to maintain color appearance over a broad range of scenarios. This includes both a document profile and a display profile.
    Many other applications are not, and all bets are off there unless you take specific precautions. So the question is, what application are you viewing the saved jpegs in outside of Photoshop?
    A screenshot showing the two side by side would help pinpoint the exact issue here.

  • Problem when install Fireworks CS4 with Window XP

    I have a problem when install Fireworks CS4
    [quote]Adobe Fireworks CS4
    Error:
    Error 1603. Fatal error during installation.[/quote]
    Please help me!
    Thanks!

    Here is a full technote when having problems with Fireworks on Windows XPPro,...  see if there is something there that helps.
    Also make sure that you also install the FWs updater:
    http://www.adobe.com/support/fireworks/downloads_updaters.html
    If nothing helps, then the only thing you can do is contact Adobe Support to see if they can help you.

  • HT3775 I have a camera security system that when you save video files have either a mp4 or avi extension.  Is there an application to open these files?

    I have a camer security system that when you save video files have a mp4 or avi extension.  Is there an application that I can open these files with?

    Try VLC media player seems to play anything.
    http://www.videolan.org/vlc/

  • Help. When you save the file, no "OAM", check the settings necessary.

    Help. When you save the file, no "OAM", check the settings necessary.

    You presume correctly. It's only when I need to do a file-open or save. The initial window opens up but as soon as you try to start navigation, the hang occurs. I also have drives mapped on these two computers, so I wonder if that could be a possible cause...

  • When I save a file as PSD after working on it when I try to save it again it say I do not have authority

    When I save a file as PSD after working on it when I try to save it again it say I do not have authority

    Good day!
    Please read these and proceed accordingly:
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#Permissions
    http://forums.adobe.com/docs/DOC-2325
    Regards,
    Pfaffenbichler

  • Opening CS4 file in CS3

    I haven't been able to open a Premiere Pro CS4 file (.prproj) in Premiere Pro CS3. I get the message "The project could not be loaded, it may be damaged or contain outdated elements."  And CS4 will not save as a CS3 file (.prproj).  Why, you ask, would I want to bring an edited CS4 file into CS3???  Because the FLVs produced by CS4 are "soft" (blurred) compared to FLV files produced in CS3 and I don't want to have to re-edit the production.  Does anyone know if it's possible to get an edited file from CS4 into CS3?  Thanks!

    Backward compatibility is seldom possible, if ever. Closest that I have come is Encore CS3 Projects do Open in EncoreDVD 2.0, with few issues, but that is the ONLY instance that I have seen.
    Now, one could Export from CS4 and then Import the resulting file in CS3 for the FLV Export. Maybe the Lagarith Lossless CODEC would help here?
    Another way might be to take the CS4 Project into AE and then take that into CS3. Have not tried this, so there could be a few pit-falls and workarounds.
    Sorry, but compatibility is usually one way - up and never down.
    Good luck,
    Hunt

  • OPENING CS4 FILES IN CS3

    Is there any way to open up CS4 files in CS3? If not, would I be able to just cut and paste from CS4 to CS3? Thanks.

    From CS4, export the file in INX format. Then you can open it in CS3 (assuming you have the most recent update of CS3). Of course, you lose anything you've created using CS4 features, so examine it carefully.

  • Flash main application toolbar disappears when I save a file in cs4

    Hi
    When I save a .fla on my macbook (snow leopard OS) the main Flash CS4 application toolbar (the one with the minimize, maximize, hide buttons on it) disappears after the save dialogue has gone.  To get it back I have to re-launch the app.
    has anyone else noticed this?  I have checked for software updates but nothing seems to be addressing this issue.
    any help much appreciated
    thanks

    i keep getting this too!
    my tools panel disappears whenever i debug a movie or when i load flash up...
    hitting "reset workspace" brings it back the way i want it - but it get old REALLY fast
    this is a VERY annoying bug... i've tried all i could on my end, but it still does that....
    and if i save another workspace, with the tools panel placed elsewhere, then it's the properties panel that starts messing with me... so irritating
    this is going on since CS4, and has NOT been fixed in CS5....
    is there an "under the hood" fix for it? some config files i can delete or something?

  • CS4 Illustrator suddenly stopped saving my guides when I save the file? How to fix?

    ?

    Thanks- I find this website rather unwieldy-I will bookmark your link.  I've used Illustrator since 1994 so i don't usually have a lot of questions. But in CS4 I find that all kinds of things suddenly happen when I roll my mouse over the wrong area .
    I had put all my guides on the bottom layer and the whole layer totally disappeared when I reopened the file. It happened twice so I finally just redid and locked the templete layer without converting it to a guide.

Maybe you are looking for