DropShip Order: How does update on OE Line flow to PO Requisition?

Hi All,
This is in 11i (115.10.2)
I have a scenario where we might need to interrupt and customize the functionality where the updates from OE DropShip Line flow to PO Requisition (Please note PO Order is not created yet).
My question is: How does the update flow from OE to PO Req in case of Drop Ship order? What are the code components involved?
Any suggestions on customizing the flow are also appreciated.
Thanks & Regards.

Hi Luko,
Thanks for the response.
But I think my question was not clear enough. Let me try again.
My question is not on the DropShip create flow. The flow is working as expected for us.
I have the following update scenario:
- DropShip SO created and booked.
- PO Requsition Created and Approved.
- PO Order is NOT created yet.
- DropShip SO lined updated. Qty in line increased from let us say 10 to 100.
- The PO Requisition line is getting updated as well. I understand this is intended functionality.
So my question is around this specific scenario:
1. How does the update (at line level) flow from OE to PO Req in case of Drop Ship order? What are the code components involved?
2. Any suggestions on customizing the flow are also appreciated.
Thanks and Regards.

Similar Messages

  • Shipping Location for Dropship Order - how will supplier know?

    Hi
    I was testing dropship flow. I have created a SO with source as external. Got Requisition created, which in turn created PO succesfully. Now, my question is, looking at this PO, how would my supplier know that it is a dropship PO? As of now, PO is showing SHIP_TO and BILL_TO addresses as my inventory organization ship_to, bill_to address.
    In PO screen, shipments button, dropship tab, I can see my sales order reference. But, how would supplier know about the exact shipping location? I can not see any reference in PO screen on PO Detail report.
    Thanks for your help.
    Regards
    Varun

    Hi Sandeep
    Thanks for your response. Now my next question, which method of PO transfer are we talking about here? If its about Printed copy of PO, then which in-built report of Oracle prints this one? I tried few in built reports, like Purchase Order detail etc, but none has this address. Only one report which has this address was Printed PO report. But that would not suit the purpose.
    Sorry if I am asking something basic. Being new to this module, Just trying to understand how exactly business process will work here.
    Thanks & Regards
    Varun

  • How does update installation work?

    Does it overwrite existing files or append the new ones? Will the new 10.5.3 update take the whole 420MB as additional disk space or will it just change existing files?
    Message was edited by: Mc Apple

    An update replaces old file versions with new ones when applicable and also may add new files or remove files no longer used.
    No, the update does not usually require the entire amount of space occupied by the updater. But the updater consists of compressed files so you cannot judge from its size how much additional disk space may be used.
    Suffice it to say that if you are so low on free space that you aren't sure there's room for the update then your hard drive is too small, and you need to free up some space. You should plan to maintain at least 10 GBs or 15% of the hard drive's capacity free, whichever is greater.

  • How does one specify command line switches for a Helper Application in Mozilla Firefox?

    Greetings,
    I would like to have a certain batch file to be executed when downloading torrent files unfortunately the Select Helper Application dialog does not allow to add command line switches. I did find a workaround to achieve this. In the Select Helper Application dialog browse to the folder which contains the batch file, type the file name including the file extension of the batch file and click on Open.
    Though, this is not the way I would like to execute the batch file. I need to pass some additional command line switches to the command interpreter but I cannot seem to find a way how. Any suggestions or clarifications would be much appreciated.
    Thanks for your time,
    Joeri

    Hi Joeri,
    This is possibly slightly off topic for this forum as it relates to something more than the standard use of Firefox. Although I do not know the answer myself someone else may post later. Otherwise try somewhere else my suggestions are:
    *The mozillazine fora tend to discuss a wider range of subjects and technical details <br/> http://forums.mozillazine.org/index.php
    *Also it may be worth asking on the Add-on forum <br/> https://forums.mozilla.org/addons/
    *Note a general information kb relating to downloads is
    ** http://kb.mozillazine.org/File_types_and_download_actions
    ** and for anyone with simpler questions [[Unable to download or save files]]
    If you do solve this I hope you post back with the answer and a link to the relevant information.
    Good luck with finding a solution, John

  • How does "update" work at Wal-Mart etc?

    Ok, I'm new to this so bear with me. I have confirmed with one of
    of my local AT&T stores that I have 2 3GS's eligible for the upgrade price ($199/$299). Unfortunately they closed the preordering before I could do so. So I was planning on getting to the AT&T store around 4am to purchase one. If for some reason they run out of phones before I get one, can I go to Wal-Mart, Best Buy, Radio Shack etc. And get one for the upgrade price?
    How would they know about current contract etc?

    IMO, i'd go to radio shack.. just because no one likes radio shack LOL i actually reserved mine yesterday.. and i'm 10th on their list.. and every best buy around here stopped taking pre-orders
    (i also live in the DC/Maryland/Virginia area.. and it's REAL populated here... many of the stores around here stopped taking pre-orders/reservations.. i just ended up making phone calls to every store within 2 hr radius ..LOL )

  • How does update my modem firmware

    My ipad 2 has modem firmware 4.12.01 how can I update this to latest one

    Thanks,
    When I buy this new I pad WIFI work, but After I update the IOS now WIFI only searching. I thought that is from firmware. My router use more I pads and I phones but My new I pad 2 can not connect,
    thnaks

  • I am missing some appleworks abilities I do not find on pages.  How does one "draw" vertical lines in a word processing document?

    How do I "draw" a vertical line on PAGES word processing document?

    Why not ask in the Pages forum.
    Update

  • How does the iTuens Store cash flow work?

    Hi there,
    we're new here and we would like to ask for experiences as to how the cash flow works for the Apple Store.
    Let's say, we submit an app.
    - How long does it approx. take for it to get approved?
    - How long does it take until the income from the app actually reaches the submitter?
    - Are there differencies concerning the cash flow between the customer's payment methods?
    - If yes, of what nature are they?
    - Is the Apple's share directly substracted from the price or does the submitter has to pay it out some other way?
    Thank you very much for any precise info whotsoever.
    sol-venetus

    Apple - iTunes - Partner Programs - Sell Your Content

  • How to Restrict one more line item in Purchase Requisition

    Dear SAP MM Guru's
    My business Requirement is to Restrict one more line item to create in Purchase Requisition,
    Using T code : ME51N  i have  created a PR with 10 (TEN) Line item's on 20 June '14 ,
    Using T Code : ME52N  on 23 June '14 my business demands to add one more line item 11th  with different material code in Purchase Requisition .
    Now Sourcing Team is demanding  is once Purchase Requisition is created Don't allow to create one more Extra line item in same PR .
    Through an Error : " One More Line Item is not possible to ADD "
    Can i use below BAPI :
    1) BAPI_PR_CHANGE
    2) BAPI_REQUISITION_CHANGE
    Please do the Needful
    Thanks & Best Regards
    Kumar

    Hi,
    Change Screen layout for PR.
    For ME52N make Material number and Material description/short text fields to 'Only display'. By this user cannot enter new material code or direct material description to add new item.
    In this scenario check :
    1. Create new with reference to another PR by adopting details.
    2. Check with Change push button behavior within ME52N and ME53N transactions available.
    3. Consider remove ME52N authorizations from users (& Change Push button also from ME53N).

  • Reschedule does not update the schedule line

    Dear All expert,
    After upgrade to ECC6.0, the reschedule does update the schedule lines eventhough it list all the required to be update in the list.
    As I checked , it update the ekpo successfully but does not update the eket.
    Is there any suggestion ?

    Hi,
    On the initial screen of V_V2
    Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
    Kapil

  • MRP does not creates Shcedule Line

    I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
    I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically. 
    I am running MRP using following parameters in MD02.
    Processing key          NETCH               Net Change in Total Horizon
    Create purchase req.    3                   Planned orders
    Delivery schedules      3                   Schedule lines
    Create MRP list         1                   MRP list
    Planning mode           3                   Delete and recreate planning data
    Scheduling              2                   Lead Time Scheduling and Capacity Planni
    Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
    What I am doing wrong? With same setting in other system it is working perfectly fine.
    Any feedback appreciated.
    Thanks
    PP

    Hi
    Check whether the Agreement Open Target value .
    If the target quantity was completed . so system will not create the Schedule lines for the material
    2. If you mainatian the open period in the smk.
    so system will create the planned order instead of schedule agreement. check

  • How do you display multi line text

    Hi
    How does one display multi line text? I would like to display address information on the screen so that the user can select it and copy/paste it into another application (ms word).
    I have the address information as separate columns (address1, address2, city, province, postal code) so I've changed the query on my view object to add it as address1 || chr(10) || address2 || chr(10) || city ....
    If I display it on the page as an output text, it all displays as one line (okay, the chr(10) thing did not work but that's beside the point).
    In general, is there a way to display multi line text? What component is suitable for this, if there is one?
    Thanks

    You can use normal outputText components in a panelGroupLayout (vertical layout) and add each attribute to it. The remove the labels or set the components to simple. You can then mark the data in the browser and use normal copy&paste to transfer the data.
    If you want to output longer text with line breaks you can use an outputText with escape=false and use the br html tag to generate a line break;
    <af:outputText escape="false"
    value="+++++++long<br>test<br> this is a long text in multiple lines" id="ot10" truncateAt="#{viewScope.ToggleBean.truncateLength}"/>Timo

  • How system updating the delivery dates in sale order schedule line

    Hello
    i created a sales order with 2 line items. For the first line item the confirmed delivery date in the schedule line is 06.02.2012 and for the second line item the confirmed delivery date in the schedule line is 14.02.2012 . Both the line items are third party items and the PR created against the line items in the sales order .
    We created the PO with reference to the PR of the SO and we find there are different delivery dates coming in the PO document for the 2 line items . For the first line item the delivery date is coming as 14.11.2011 and for the second line item in the PO , the delivery date coming as 11.11.2011 . Firstly we are not understanding from where the delivery dates are picking in the PO.
    Secondly , once we saved the Purchase order and once we come back to the sales order , the schedule line dates are getting changed automatically in the sales order . For the first line item in the sales order the delivery date is changing to 22.11.2011 and for the second line item in the sales order the delivery date is changing to 22.11.2011.
    Now my question , is from where the delivery dates are updating in the Purchase order and once we save the purchase order how the delivery dates in the schedule line are getting changed .

    Now my question , is from where the delivery dates are updating in the Purchase order and once we save the purchase order how the delivery dates in the schedule line are getting changed .
    For third party processing, the delivery dates are updated in the purchase order based on the settings in the field Planned delivery time in the MRP2 view of the material master(defined in purchase info record in t.code ME11/ME12) and purchasing processing time defined in t.code OMEW. This means, since the date of PO created, it will take the days mentioned in the planned delivery time field and purchasing processing times to determine the delivery date, which will be copied into the sales order as delivery date. In your case, the purchase order delivery date is not copied into the sales order, hence you may need to check OSS note. How the PO is handled? Any confirmation control functionality is used?
    Regards,

  • I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

    I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

    Ignore it. 'itunes:order' is a recent addition which FeedValidator doesn't know about. If your podcast is rejected that is unlikely to be the reason. Of course as you haven't posted the feed URL nor the text of the error message I can't make any further comment.

  • Updating the MacBook pro line: how does Apple usually do it?

    Hi everyone, I'm planning to buy a MacBook pro and I need your help.
    I was wondering if a new pro could be presented in the next months (due to the passage to face time in all Mac products). My questions: has every MacBook updates been presented during a public apple event?
    I mean: could apple decide to update the pro line simply modifying it on the store, or it usually does it only organizing a public event? My memory is not so good so I ask if you remember what is the habit in this case, considering that the pro line has been updated many times but I don't remember if presented in a public event or not.

    Read my user tip:
    http://discussions.apple.com/thread.jspa?threadID=1502615&tstart=0

Maybe you are looking for