DRQ : Warehouse Name in Bill of Material for Finished Product

Hi
The Warehouse Name is missing in the drop-down list in the header level of BOM.  It is very difficult to select the Warehouse from drop-down, if there are too many Warehouse.  Or other way to provide a Select from List functionality for Warehouse selection (as it is in the row level).
Or is there any other alternatives?
My request is to specifically SAP Team and I would glad to see a response.
Thanks
Anjan Bhowmick
New-Age Business Consultants
Bangalore, India

Hi Nishit Makadia...
Check with the following links
http://scn.sap.com/thread/3226349
Crystal Reports Dynamic Parameters with SAP Business One
crystal reports parameters problem in sap business one environment
Hope Helpful
Regards
Kennedy

Similar Messages

  • Material Valuation for Finished Product in Production Scenario

    Dear SAP Gurus,
    Kindly recommend appropriate Material Valuation Control for Finished Product in manufacturing scenario. SAP recommends pricing control 'S' (Standard), but my client's buying nature is not periodic(varies), they buy material on requirement basis (On actual material consumption ) which is very frequent. Pricing for each buy also changes due to the market conditions. You are requested to suggest me appropriate Material Valuation Control (either S / V) for Finished Product along with reasons, advantages & disadvantages for the same.
    Thanks,
    Shantanu

    Hi Alll
    Well one disavantage in material with 2/V for production consumption is in case of incorrect goods receipt, incorrect price for example, all your consumption will be wrong.
    For correction you would have to reverse all production posting, correct the goods receipt and repost the production confirmation.
    If you were using 3/S configuration, all consumption would be done in standard price and at month end material ledger would calculate the actual price for price revaluation. People from MM would have time to correct the entries during the month.
    Regards.

  • I think I have been billed 8 times for a product I...

    Hi,
    I just tried to purchase the Soundhound app from the Ovi store for my Nokia C7. I use my phone bill for purchases. I was asked to confirm the purchase which I did. I waited then a message came up saying there was a problem with the billing service and I should try again later, so I exited the screen
    Almost immediately I was bombarded with 8 identical SMS messages from OviStore (82102) saying "Thankyou for your purchase from OviStore by Nokia. Your transaction ID is (all different numbers in each text)".
    Also there was no link in any of them to my download! I have a suspicion I have been billed 8 times for a product I haven't even received.
    Is there a contact phone number for Ovistore so I can rectify this?

    I've tried to buy other application today and also had the same problem. I've performed attempts 2 times via Phone Bill and it took the payment twice from my phone.
    I've just sent the message about it to support (Support -> Contact us) and asked them to refund the payments.

  • Combination of plant SUNP and material type finished product does not exist

    HI i am  suneel
    my issue is  combination of plant SUNP and material type finished product does not exist  when i posting to material in t.code
    MB!C after entering materiel and qty in the selection screen i pressed enter on that time this massage is happening
    Thanks
    with regards
    suneel

    Hi lakshmi pathi ,
    Sorry for the inconvenience i am new for this sap sd and also this community . Actually  yesterday and today i got lot of solutions  from this community .really i feel very happy with this and i continuous searching for my issues and i got so many solutions. these are also i searched but i dint got any solutions so i posted here .
    sorry for the inconvenience
    any way thanking you for giving valuable suggestion.
    with regards
    suneel

  • Purchase requisition generate for alternative bom use for finished product

    i hav alternative BOM for finished product in which different raw material component in both BOM of same finished product.But when i RUN MRP that time only one raw material requisition generate another alternative bom raw material requision not generate.
       Is there any option when i RUN MRP that time we select one of the alternative bom component of  raw material for generation purchase requisition.
    Thnaks in Advance

    Dear ,
    MRP will select the BOM based on the MRP4-BOM Explosion tab -Selection Indicator .It can eitehr of these ways :
    1.Maintain Production Version with  different Alternative BOM  and keep Selection Indicator -3 .So sysetm will look into only the Valaidty  and lot size of the Production version and select the correct BOM to explode  and generate PR for depednts based on stock situation
    2.If you maintain Blank -then it will look into order qty and select the BOM according ly
    As in your case , selection methods 3 will fit  and you need to maintain PV with correct validity and lot size in MMR-MRP4-PV option .
    Try in sand box with different lot size and validity with indicator-3 .Create Order and run MRP-MD02-1,,3,3,3,2
    Check and revert
    Regards
    JH

  • Creation of Production order for FInished Product through Project

    Hi,
    Pls clear me on how we can create a Production Order for finished product.  
    If we confirm the production orders in PP, cant the same be confirmed in PS.. Should we consider the same activity types in both PS and PP
    Pls clarify

    hi srikanth,
    your answer has been very helpful... but could u clarify  why MRP is run in MD51 for WBS element and in MD02 for network..
    Pls clarify...  My scenario is like this ...                                                                               
    A
                            B                                                                                C
                    D  E F G H I                                                                                J K L M N O
    I have  a Assemblies B and C which are always delivered in sets.. under assemblies B and C,  we have 6 sub assemblies which has its own components.  I am assigning sub assemblies to differenet WBS elements 01 and 02. so, initially these sub-assemblies are produced to stock. this should happen in PP i.e., through production orders generated in MRP run ( MD51 ). In the next phase i will assign Assemblies B and C to another WBS element.  Again system should generate two Production orders thru MRP for this. Here the 6 sub-assemblies produced earlier will be consumed in confirmation of the production order...
    What i am doing is this correct...
    and the procurement for the components is happening thru the purchase requisition generated via MRP. the components themselves are not directly assigned to the project..
    Pls advise and clarify?

  • Query for Finished Product in Production

    Dear All
    I require a query for  Finished Product in Production. 
    Product       Opening Balance                 Receipt                  Issued Quantity                  Closing Balance
    Can anyone help me on this??
    Thanks,
    Pratap

    Hi Pratap,
    You may check this first:
    http://scn.sap.com/thread/1631705
    Thanks,
    Gordon

  • Pallet sheet for finished products printed in the not expected printer

    Hello to all,
    I have an issue right now with a user printing pallet sheet for finished products in Z602 printer.  The user wanted it to be printed in printer Z630.  I have checked transaction SU01 and found that the output device assigned to the user is Z630.
    What would be the cause of the documents coming out in Z602? 
    Just to add, the user print the document via transaction CO02, if the person needs more palette sheet then he prints by transaction LT01, and LT16 is just to cancel.
    Many thanks.
    Regards,
    Patvin
    Message was edited by:
            patvin

    Hi Patvin,
    You can try using T.code Co04 and after giving parameter got to Print and do print setting.
    If it solve reward and close this issue
    Thanks
    Bala

  • Palette sheet for finished products not printed in expected printer

    Hello to all,
    I have an issue right now with a user printing pallet sheet for finished products in Z602 printer. The user wanted it to be printed in printer Z630. I have checked transaction SU01 and found that the output device assigned to the user is Z630.
    What would be the cause of the documents coming out in Z602?
    Just to add, the user print the document via transaction CO02, if the person needs more palette sheet then he prints by transaction LT01, and LT16 is just to cancel.
    Many thanks.
    Regards,
    Patvin

    Hi Patvin,
    You can try using T.code Co04 and after giving parameter got to Print and do print setting.
    If it solve reward and close this issue
    Thanks
    Bala

  • Production - Multiple Bills of Material for a FG Product

    Hi,
    In SAP B1 - It is not possible to create multiple Bills of Materials for a FG product.
    Is there any workaround to address this issue?
    At our location we have multiple alternative combinations of components which can be used to create the same FG product.
    One alternative is to create Special Production Orders (but with no BOM). Is there a better option?
    Regards
    Manish
    Edited by: Manish Chaturvedi on Apr 1, 2009 12:51 PM

    HI  Manish,
    Your Bill of material is dynamic so just try to solve this by alternative items(Raw Material). i hope it will work.
    But in SAP B1 standard there is no work arround. you have to change the BIll of material every time. or make one udf in the title level with the name version 1,2,3 ..... and save it in the system. and pick the BOM which you will needed at the time of Production.
    I hope it will solve your question.
    Ashish Gupte

  • Hide all the components in bill of material for all the transaction

    Hi experts
    I have requirement where my client does not want to share the bill of material details across the organisation. Hence they would not like to see bill of materials components details for particular set of materials.
    Also, when any material documents or any other related transctions are posted in those production order, they want that only authorized user should view those components of BOM.
    Please help me in this regards
    Let me know if my question is unclear.
    Thanks

    yes.. particular set means a group of materials but they do not have a common material group assigned to them in the material master.
    And as you mention, i need to do something in the mentioned transaction. How to do that..
    because there should not be any loop holes for any users to get the information to identify BOM.
    Regards

  • Upload update for Warehouse for finished product in BOM

    Hi everyone,
    Is there a way to update the warehouse for the finished product in BOM using DTW? I can only update the warehouse for the raw materials / components through DTW but not the warehouse for the finished goods, except by doing it manually one BOM after another.
    Thanks and regards,
    Derrick

    Hi Rakesh N,
    I changed the default warehouse then I noticed that only the newly added/uploaded BOM took the default warehouse are the warehouse for the finished goods. The earlier BOMs were not affected by the change in the default warehouse - the warehouse remain as they were when initially uploaded. Is there a way to update the warehouse for the earlier added BOM. we have quite a huge number of BOM and updating them one by one will take too long to complete.
    Thanks,
    Eric

  • Offseting entry to inven posting for finished product in sub  contracting

    When we post goods receipt in subcontracting inventory account is debited with finished product.What is the account name to which offsetting entry is made & how to configure this in automatic account determination.
    1) Same question was already asked and moved to T&P form.
    2) Basic question.
    3) Points will be unassigned.
    Edited by: Csaba Szommer on Apr 16, 2011 7:58 AM

    Hi,
    If Material has Price Control as "V" (MAP)
    (BSX) Stock A/c of Assembly - Dr
    (BSV) Change in Subcon Stock - Cr
    (FRL) Subcontracting Charges - Dr
    (WRX) GR/IR Clearing A/c - Cr
    (BSX) Stock A/c of Components - Cr
    (GBB-VBO) Consumption A/c of Components - Dr
    If Material has Price Control as "S" (Std. Price)
    If Material is having Price Control as "S" then Price Difference A/c will also in picture.
    This depends on configuration; SPRO > MM > Inventory Management and Physical Inventory > Goods Receipt > Price Differences for Subcontract Orders at Goods Receipt
    Price Differences for Subcontract Orders at Goods Receipt
    In this step, you configure for each valuation area whether price differences are generated for a Subcontract order at the time of a goods receipt if the manufactured material is managed at standard price and the standard price varies from the receipt value (externally performed service + value of components + delivery costs).
    Example
    Finished product: $400 (value at standard price)
    Subcontract order:
    o Ext. service : $250
    o Components : $100
    Posting schema without price differences:
    Stock account FERT : 400 +
    Stock change : 400 -
    GR/IR clearing acct : 250 -
    External service acct : 250 +
    Compon. stock account : 100 -
    Consumption account : 100 +
    Posting schema with price differences:
    Stock account FERT : 400 +
    Stock change : 350 -
    Price difference : 50 -
    GR/IR clearing acct : 250 -
    External service acct : 250 +
    Compon. stock account : 100 -
    Consumption account : 100 +
    And cost center is mandatory for subcontracting process
    the accounts for the BSX FRL and GBB-VOB needs the cost elements
    Thanks
    Diwakar

  • Actual Cost for Finished Products

    Hi All,
    For Finished Goods calculation will use Semi finished Goods and Raw Material, while calculating the Finished Goods in cost object controlling system is picking the Standard Price Multiply Actual Quantity of semi finished goods.
    My Client requirement is to calculate the Finished Goods based Actual Quantity Multiply Actual Price.
    Is there any standard settings available or not?
    Regards
    Srinu

    hi..
    If you do not want to activate ML then all materials defined as price control "V" and Price deetermination as "2"
    kkumar

  • Third Party for finished product

    normally I sell a product and it is maintained as a Finished product.
    But now I dont have the enough Inventory for that product.
    So I have asked my Vendor to supply that material to the customer.
    In this case I cant maintain this product as the Trading good.
    how should i configure this scenario.
    regards,
    sheetal

    Hi
    there is no need to maintain a thirdparty material as trading goods. you just maintain as a standard finished product.
    and in VOV4 maintain a TAS(thisrd party) as manual item category for your standard item combination (lets say ORNORM-+- = TAN TAS)....
    <b>when processing a sales order just change the item category to TAS whenever you need a thisrd party order,.............</b>
    Hope this will resolve your problem  
    Reward points if helpfull
    Muthupandiyan

Maybe you are looking for