DRS issues with Unity Connection 7.1.5

Hi all,
We're having some Issues with the DRS Backup of a CUCM BE 7.1.5 System.
System Version is 7.1.5.10000-12.
When selecting the CUC Feature in DRS the backup fails,
The Error I get is the following:
Failed to initiate backup. Server [ZURCM01], component [CLM] requires component [PLATFORM] to be registered.
When deactivating the CUC Feature the Backup runs normally.
Any ideas how to fix this?
Thanks for all your Help
BR
Alex

Hi Alex,
You may want to try the steps in the below defect and see if it helps you any:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw64366
Hope that helps,
Brad

Similar Messages

Single Inbox Issue with Unity Connection 8.5 and Exchange 2003

Hello Unity Gurus,
I recently upgraded our Unity server to Unity Conenction 8.5. We are pressing hard to have unified messaging. However theres always problems it seems.
We have several 2003 exchange servers, two of the exchange servers split up our organization and one has half of the users mailboxes and the other server has the remaining half. So far the only way that I can get Unified messaging is if I create two separate Unified Messaging Services one for one half, the other for the other half.
This becomes a problem since now when I create the Unified Message account I have to know what server the user is on and the problem being is that I have 700 voicemail users ill have to look up. Not only that but, if our employees move from one site to the next and if the mailbox gets moved then I imagine most likely break unified messaging for that account.
I've read the install guide for Unity connection Unified Messaging and I understand that the second option is to have Connection to search for Exchange servers via Active Directory however, when I set that up and test it via unified messaging services I get an error " searching network...failed to locate domain controller via DNS. Failed to locate an exchange 2003 server."
DNS seems to work if I create single Unified Messaging Service and use the host name that way.
Anyone have any thoughts or found a work around to this issue?
Thanks,
Dan

We have 41 exchange UM services configured in Unity Connection on 10 clusters, each one to the 2003 exchange servers. This is the only way it will work for us, as e2k3 can not search for and find other exchange services. For 2010, it is able to search by AD domain and site name, and we only have one connector configured on each server to the e2k10 environment. I believe this is the way it works, and is difficult to manage but works. Just my two cents.

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Issues with my connection when gaming (Insurgency)

Hello,
I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
Video of ping:
nl.tinypic.com/r/ztisd1/8
I hope someone has the solution.
Excuse me for my incorrect English, it's not my native language.
Bye!

Thanks for your reply.
I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
Longer vid of ingame netgraph:
nl.tinypic.com/r/97mjae/8
I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
Bye

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

MWI problem with Unity Connection 8.6

I just upgraded to Unity Connection 8.6 (HA). I am using the SIP integration to CUCM 8.5.1. The sip phones I am using are working great with MWI. None of the sccp phones are being notifiied with MWI. Does anyone know of any issues with this? MWI is working since the sip phones are displaying correctly.
Thanks,
TJ

I found the solution. I had to change the system policy on the UCM for "visual message waiting indicator policy" to "light and prompt. Once I applied that to the phones and re-synched the MWIs in Unity Connection.

Issues with BAM Connection in JDeveloper

I have issue with Jdeveloper BAM connection.
After BAM & OiD configuration, I can't test BAM connection in Jdeveloper. Jdev reports BAM configuration error.

I've created new one.
Actually, I have to return to Windows auth, cause cust should make report develoopment.
Could you provide any information how BAM connection shold be connfigured? I'll make next try.

Issues with changing connection at run-time

Post Author: dmazourick
CA Forum: Data Connectivity and SQL
Weu2019ve tried a lot of different ways to resolve this issue, but are getting every time the different result.
Probably someone deal with that issue before and know how to correctly resolve it.
Weu2019re using Crystal Reports Runtime Components X+ (X, XI, XI R2) u2013 all of them has this issue.
We need client application to connect to multiple data sources u2013 user chooses report, chooses data source and we show the report for specified data source.
The data sources are tables or stored procedures stored in different databases on different servers.
For sure, every data source for a single report has the same structure, but that doesnu2019t matter.
The issue is: when the name of the database on one server is the same as the name of database on second server, the connection caching occurs.
How we can check that:
1.       Weu2019re running report for Server1:<DBN> - report shows data from Server1.
2.       Weu2019re opening second report for Server2:<DBN> - report shows data from Server1.
3.       Weu2019re closing application and run 1-2 in opposite order, now both reports show data from Server2.
Weu2019ve tried different approaches u2013 below is a code sample that opens the report for specific connection.
Juts to be sure that no one will ask u2013 u201CAre you sure youu2019re passing the correct connection info etc.u201D. Yes! We are sure because weu2019re trying to fix this issue for a long time and tried a lot of different approaches and still cannot find the right solution.
The code looks like below. This is VB6 code, but also the same situation was tried on VC++ 6.0
Weu2019re not looking into CR.NET solution for now.
=================================================
Sub DisplayReport(Server as String, DB as String, UID as String, PWD as String, viewer as Object)
    Dim app As New CRAXDRT.Application
    Dim report As CRAXDRT.report
    Dim database As CRAXDRT.database
    Dim table As CRAXDRT.DatabaseTable
    Dim par As CRAXDRT.ParameterFieldDefinition
    Set report = app.OpenReport("D:\TestReport_X.rpt")
    report.database.LogOnServer "pdssql.dll", Server, DB, UID, PWD
    Set table = report.database.Tables(1)
    table.SetLogOnInfo Server, DB, UID, PWD
    table.Location = table.Name
    report.database.Verify
    viewer.ReportSource = report
    viewer.ViewReport
end sub
=================================================
The result of above code is the following:
1.       If we will pass the same viewer and will use different Server u2013 the report will be displayed correctly
2.       If we will pass different viewers and will use different Server u2013 the reports will contain same data
The result of above code also depends from the version of Crystal Reports the report was designed in:
1.       For Report designed in 8.5 u2013 passing of the same viewer with same connection info second time will refresh report
2.       For Report designed in X, XI, XI R2 u2013 no refresh
Also, a slight modification of the above code helps for reports designed in XI to work properly, but not for reports designed in X and 8.5:
1.       Before calling LogonServer, make the following: DB = DB & u201C;u201D & Int(rnd()*32767)
That makes report designed in XI to display properly in different viewers, but doesnu2019t have any impact to X and no any impact to 8.5
Weu2019re really looking for any help in this question

Post Author: fburch
CA Forum: Data Connectivity and SQL
I am having similar problems and some successes.
I have 70+ reports and now suddenly I want to point them at two different servers, but at databases with the same name like you talked about.
I first just tried the following:
#1. Load report:
Dim myReport As New ReportDocument
myReport.Load(filename)
#2. Pass in parameter values
''Get the collection of parameters from the report
Dim crParameterFieldDefinitions As ParameterFieldDefinitions = r.DataDefinition.ParameterFields
''Access the specified parameter from the collection
Dim crParameter1 As ParameterFieldDefinition = crParameterFieldDefinitions.Item(ParamName)
''Get the current values from the parameter field. At this point
''there are zero values set.
'crParameter1Values = crParameter1.CurrentValues
''Set the current values for the parameter field
Dim crDiscrete1Value As New ParameterDiscreteValue
If crParameter1.ValueType = FieldValueType.DateField Or crParameter1.ValueType = FieldValueType.DateTimeField Then
If ParamValue Is System.DBNull.Value Then
crDiscrete1Value.Value = CDate("1/1/1900")
ElseIf ParamValue Is Nothing Then
crDiscrete1Value.Value = CDate("1/1/1900")
Else
crDiscrete1Value.Value = ParamValue
End If
ElseIf crParameter1.ValueType = FieldValueType.StringField Then
If ParamValue Is Nothing Then
crDiscrete1Value.Value = ""
Else
crDiscrete1Value.Value = ParamValue
End If
ElseIf crParameter1.ValueType = FieldValueType.BooleanField Then
If ParamValue Is Nothing Then
crDiscrete1Value.Value = False
ElseIf ParamValue.ToString.ToUpper = "TRUE" Then
crDiscrete1Value.Value = True
Else
crDiscrete1Value.Value = False
End If
ElseIf crParameter1.ValueType = FieldValueType.NumberField Then
If ParamValue Is Nothing Then
crDiscrete1Value.Value = 0
Else
crDiscrete1Value.Value = ParamValue
End If
Else
If ParamValue Is System.DBNull.Value Then
crDiscrete1Value.Value = Nothing
ElseIf ParamValue Is Nothing Then
crDiscrete1Value.Value = Nothing
Else
crDiscrete1Value.Value = ParamValue
End If
End If
''Add the first current value for the parameter field
Dim crParameter1Values As New ParameterValues
crParameter1Values.Add(crDiscrete1Value)
''All current parameter values must be applied for the parameter field.
crParameter1.ApplyCurrentValues(crParameter1Values)
#3 Set "Table Log in info" (most of my reports using stored procedures, but I guess I still needed this step).
Dim CrTables As Tables = r.Database.Tables
Dim CrTable As Table
Dim crtableLogoninfos As New TableLogOnInfos()
Dim crtableLogoninfo As New TableLogOnInfo()
With crConnectionInfo
.ServerName = connectionParser.GetServerName(connectionString)
.DatabaseName = connectionParser.GetDatabaseName(connectionString)
If connectionParser.DoesUseIntegratedSecurity(connectionString) = True Then
.IntegratedSecurity = True
Else
.UserID = connectionParser.GetServerUserName(connectionString)
.Password = connectionParser.GetServerPassword(connectionString)
.IntegratedSecurity = False
End If
End With
For Each CrTable In CrTables
crtableLogoninfo = CrTable.LogOnInfo
crtableLogoninfo.ConnectionInfo = crConnectionInfo
CrTable.ApplyLogOnInfo(crtableLogoninfo)
If InStr(CrTable.Location, ".dbo.") = 0 Then
CrTable.Location = crConnectionInfo.DatabaseName + ".dbo." + CrTable.Location
End If
Next
If r.Subreports.Count > 0 Then
Dim crSections As Sections
Dim crSection As Section
Dim crReportObjects As ReportObjects
Dim crReportObject As ReportObject
Dim crSubreportObject As SubreportObject
Dim crDatabase As Database
Dim subRepDoc As New ReportDocument()
'SUBREPORTS
'Set the sections collection with report sections
crSections = r.ReportDefinition.Sections
'Loop through each section and find all the report objects
'Loop through all the report objects to find all subreport objects, then set the
'logoninfo to the subreport
For Each crSection In crSections
crReportObjects = crSection.ReportObjects
For Each crReportObject In crReportObjects
If crReportObject.Kind = ReportObjectKind.SubreportObject Then
'If you find a subreport, typecast the reportobject to a subreport object
crSubreportObject = CType(crReportObject, SubreportObject)
'Open the subreport
subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
crDatabase = subRepDoc.Database
CrTables = crDatabase.Tables
'Loop through each table and set the connection info
'Pass the connection info to the logoninfo object then apply the
'logoninfo to the subreport
For Each CrTable In CrTables
crtableLogoninfo = CrTable.LogOnInfo
crtableLogoninfo.ConnectionInfo = crConnectionInfo
CrTable.ApplyLogOnInfo(crtableLogoninfo)
If InStr(CrTable.Location, ".dbo.") = 0 Then
CrTable.Location = crConnectionInfo.DatabaseName + ".dbo." + CrTable.Location
End If
Next
End If
Next
Next
#4 go get the data
crv.ReportSource = myReport
crv.Refresh()
#5 Call export to disk function.
This was not changing server - did not realize it was a caching problem as you suggested. That makes sense. So anyway, then of course I threw a verify database statement on there, before I get the data. Now looks like this:
#1 Load Report
#2. Pass in parameter values (dummy values that will generate schema of table without having to actually run long running procedures, i.e. select (cast 1 as int) as somefield1, cast(2.0 as numeric(10,0)) as somefield2
#3 Set "Table Log in info"
#3b Verify the database which seems to be a necessity:
myReport.VerifyDatabase()
#3c Re-populate the report with real parameter values, same as #2 but this time with the ones that will generate the real data
#4 go get the data
#5 Call export to disk function.
This does work, some of the time. When the datasource underlying report are tables, it works. I made a dummy crystal report with lots of different types of params (stored procedure underlying database) - this also worked!
Unfortunately, when I run this against the majority of my reports, I get this stupid "invalid mapping type value", for which I have not been able to resolve yet.
I also tried putting a myreport.SetDatabaseLogon("","") -- what would this do, clear it out? (saw this referenced somewhere).
Then I tried putting the real connection info in there as well ...
myReport.SetDatabaseLogon(uid, pwd, serverName, DBname)
I put this setdatabase thing before I called verifydatabase, which is where the process is bombing out and giving me invalid mapping type for the reports that do not run.
At this point I am still working on solution. I have tried creating dummy report that used same parameter types as a report that was failing and voila - the dummy report worked. Anyway, let me know if you get your problem fixed and I will do the same. Looks like you are using a different method that I didn't notice "LogOnServer"

Issues with JDBC Connection Pooling

Hi all,
I'm experiencing some unexpected behaviour when trying to use JDBC Connection Pooling with my BC4J applications.
The configuraiton is -
Web Application using BC4J in local mode
Using Default Connection Stagegy
Stateless Release Mode
Retrieving Application Modules using Configuration.createRootApplicationModule( am , cf );
Returning Application Modules using Configuration.releaseRootApplicationModule( am, false );
Three application modules
AppModuleA - connects to DatabaseConnection1
AppModuleB - connects to DatabaseConnection2
AppModuleC - connects to DatabaseConnection2
My requirement is to -
Use App Module Pooling and have individual pool for each Application Module
Use JDBC Pooling and have individual pool for each Database connection
Note: All configuration was achieved in design mode (i.e. right clicking AppModule->Configurations...)
1. Initial approach -
In the configuration for each Application Module I specified the connection type as 'JDBC Datasource' and specified to approriate datasource.
Tried setting doConnecitonPooling to 'true' as well as 'false'
In the data-sources.xml I specified all the appropriate info including min-connections and max-connections.
I would expect, with the above config that BC4J would use OC4J's built in JDBC connection pooling.
2. Second approach -
In the configuration for each Application Module I specified the connection type as JDBC URL.
In the configuration I specified doConnectionPooling = 'true' as well as the max connection, max available and min available
What I experienced in both cases was that the max connections seem to be ignored as the number of connection as reported by the database (v$session) was exceeded by more than 10.
In addition to this once the load was removed the number of JDBC connecitons did not drop (I would have expected it to drop to max available connections)
My questions are -
1. When specifying to use a 'JDBC Datasource' style of connection, is it in fact OC4J that is then responsible for pooling JDBC connections? And in this case should BC4J's doConnectionPooling parameter be set to true or false?
2. Are there any known issues with the use of the JDBC Conneciton Pool as stated by the above to approaches?

Thanks for the additional info. Please see my comments. below.
Sorry should have been more specififc -
1. Is each application pool using a different JDBC user? You mentioned DatabaseConnection1 and DatabaseConnection2
above; are these connections to different schemas / users? If so, BC4J will create a separate connection pool for each
JDBC user. Each connection pool will have its own maximum pool size.
Each 'DatabaseConnection' refers to a different database, actually hosted on a seperate physical server, different
schema and different user.BC4J will maintain a separate connection pool for each permutation of JDBC URL / schema. If each user is connecting
to a different DB instance then I would expect no greater than 10 DB sessions. However, if a DB instance is hosting
more than user then I would expect greater than 10 DB sessions (though still no more than 10 DB sessions per user).
2. Are all the v$session sessions related to the JDBC clients? There should be at least one additional database
session which will be related to the session that is querying v$session.
When querying the v$session table I specifically look for connections from the user in quesiton and from the machine
name in question and in doing so eliminate the database system's connections, as well as the query tools'
connection. One area I'm not sure about is the connection BC4J uses to write to its temporary tables. I am using
Stateless release mode and have not explicetly stated to save to the database but I'm wondering if it still does if so
and how does it come into the equation with max connections?BC4J's internal connections are also pooled and the limits apply as mentioned above. So, if you have specified
internal connection info for a schema which is different than the users above I would expect the additional conns.
One helpful diagnostic tool, albeit programmatic, might be to print the information about the connection pools after
your test client(s) have finished. This may be accomplished as follows:
// get a reference to the BC4J connection pool manager
import oracle.jbo.server.ConnectionPoolManagerFactory;
import oracle.jbo.server.ConnectionPoolManagerImpl;
import oracle.jbo.pool.ResourcePool;
import java.io.PrintWriter;
import java.util.Enumeration;
// get the ConnectionPoolManager. assume that it is an instance of the supplied manager
ConnectionPoolManagerImpl mgr = (ConnectionPoolManagerImpl)ConnectionPoolManagerFactory.getConnectionPoolManager();
Enumeration keys = mgr.getResourcePoolKeys();
PrintWriter pw = new PrintWriter(System.out, true);
while (keys.hasMoreElements())
Object key = keys.nextElement();
ResourcePool pool = (ResourcePool)mgr.getResourcePool(key);
System.out.println("Dumping pool statistics for pool: " + key);
pool.dumpPoolStatistics(pw);
}

Issues with WIFI-connection in the Spotify app

I have a very annoying problem with my Nokia 5800 XM and the Spotify-app. I updated the app to v. 0.4.3.9 yesterday and it required that I uninstalled the old version first, i.e deleting all my cached tracks. Now today when I'm going to resync (on WLAN, since it's about 500 tracks) it just won't connect. I choose the correct WLAN from the list, but the app continues being blue (not green) and then the list pops up again. I read another discussion about almost the same thing a moment ago, so I tried to go to the menu and check the WLAN connection from its menu. So I did that, and it says my WLAN has full signal strength (I'm right next to the router) but then it loses the connection and asks me again which network I want to use. I have not had any issues with WLAN in any other app, and I have synced tracks with Spotify on my WLAN before, so I have no idea where the problem lies. Maybe something with the update and my WLAN? I don't know...
About the attachments: The list that shows several times and then the WLAN list where I'm connected to my network and it has full strength. "Marsvinsfarmen" is my network.
I'm thankful for answer, I use Spotify every day!
Solved!
Go to Solution.
Attachments:
Scr000012.jpg ‏51 KB
Scr000013.jpg ‏54 KB
Scr000014.jpg ‏50 KB

Okay everyone! I struggled with this problem for a long time, and I was just about to send a complaint to Spotify when it worked for me! See, I did a little different than before; this is the list I was going to file:
"1. I open Spotify from the application menu.
2. I choose "Online" mode.
3. My phone asks me how I want to connect to the Internet.
4. I pick "Easy WiFi".
5. I choose my WiFi network from the list.
6. Application seems to be signing me in.
7. My phone asks me again how I want to connect to the Internet.
8. I repeat the procedure. Spotify can't connect with WiFi.
-I have tried to connect using other WiFi networks, didn't work.
-Before I updated last time I could connect without problem.
-I can connect using 3G.
-I can connect using WiFi in other applications than Spotify, for example Opera Mobile and the native browser.
-I have reinstalled the application without difference."
However, I did it a little different, which made it work: instead of choosing "Easy WiFi", I choose my network directly from the list: see attachment. I never thought of that I could do so and I can't remember I did that before the update either. I have now synced my tracks and the app seems to be a little buggy, I still hope for an update, though it now works at least. Sometimes it crashes.
Please, tell me about if this worked for you and if you have other, better solutions. This isn't good enough, I still seek a better way.
/L
Attachments:
Scr000020.jpg ‏53 KB

Issues with Infinity - Connection Speed & Other Pr...

Hi all,
I had Infinity installed on 2nd November. Besides some issues with BT mixing up delivery addresses the installation by Kelly Comms went smoothly, and was setup within 45 mins.
Initial speeds were very good, achieving 74Mb/s Down & 18Mb/s Up with a Ping/Latency of 5ms Excellent really considering the sub 5Mb/s I was used to with ADSL. The high connection speeds remained over the weekend until about 4pm on November 5th. I found that the Openreach Modem had lost connection (flashing DSL light) and my HH3 Broadband light was a steady orange. I left this for a while before picking up my landline to call customer services only to find that my line was dead with no dial tone.
Broadband eventually came back on service later that afternoon, but at a much lower speed of 43Mb/s Down, and an almost impossibly slow 0.97Mb/s Up. Ping/Latency has also slowed to around 20ms. During the evening I managed to get through to customer services in India, who were able to start dealing with the fault on my phone line.
Initially I was told it would be the 12th of November that the problem with the phone line would be resolved. Fortunately enough it was then fixed the following morning by an apparent engineer visit. I was unaware of this action until later in the day, but had noticed before leaving for work that Broadband was yet again down.
So to cut a long story short: I have a phone line that works, but a big reduction in connectivity speed especially upstream speed. Should I be contacting BT to investigate yet another potential problem bearing in mind that I am still within the supposed '10 day training' window.
(All speed tests have been conducted via a PC connected by ethernet directly to the HH3)
If anyone can advise me it would be much appreciated.

Hi Tidycarrot,
Welcome to the Forum. What was the speed estimate given to you when you signed up to the service? If the speeds you are see are well below that estimate, send me in your details using the link below and I'll run a few test on you line from here.
http://bt.custhelp.com/app/contact_email/c/4951
Thanks
Paddy
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

DRS issues with Unity Connection 7.1.5

Similar Messages

Maybe you are looking for