Drummer region starts with fill on 1 bar when open new project.

Drummer region starts with fill on 1 bar when open new project
and if I copy a region, say 10 times, they all starts with a fill.
So my work around is to delete the automatic generated regions
and make new ones. If I need to copy many regions I copy one
at a time. Using latest LX.
Anyone experienced this? Do I miss something in the process?

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Similar Messages

How can I open FireFox with the 'Find' box/bar always open?

When FireFox opens, click 'Edit' and 'Find'. This opens the box/bar at the bottom of the screen. I use it so often, I would like FireFox to open with the 'Find' box/bar already open.

You are welcome. Happy New Year, Aivas.

Adobe reader installer freeze with out downloading Adobe Reader when opened?

I can not download Adobe Reader on my Mac: I can do it on my iMac, and have done it fore 10 years now, but Adobe reader download freeze before downloading the file

thank you so much fore your reply: it is the download assistant..
BUT I have just got a download in direct mode.
Frederik
Den 25/08/2014 kl. 20.39 skrev Sabian Zildjian <[email protected]>:
adobe reader installer freeze with out downloading Adobe Reader when opened?
created by Sabian Zildjian in Enterprise Deployment (Acrobat and Reader) - View the full discussion
Is it the Download assistant that is freezing or is it the web browser that freezes?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6672321#6672321
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Enterprise Deployment (Acrobat and Reader) by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.

Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day.

Hello. I have a new Computer and import my mediathek with an externe storage. When opened the new Mediethek in front of every song there is a explanation mark: original song could not been found. I try everything. Whats the Problem??

Hello. I have a new Computer and import my mediathek with an externe storage. When opened the new Mediethek in front of every song there is a explanation mark: original song could not been found. I try everything. Whats the Problem??

But it seems the OP has a setup where the media is on the external drive, and the library files are on the internal. This is what I refer to as a split library, Migrating such from one computer to another is not straightforward. Often iTunes will have some definite idea about where the files should live, and updating the setting of the media folder won't change that. If it requires a drive letter change that is usually not too hard, but sometimes there is another preference file that needs tweaking to indicate which of the old & new layouts for the library is being used. In more extreme cases I have a script for automatically making track by track repairs.
tt2

When opening new message page loads with message from some one already filled in

using fire fox I go to hotmail lg in open new message and there is already a message there saying hi etc and information about a web site..it appears everytime I want to send a new message
== This happened ==
Every time Firefox opened

Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

SSMS 2012 crashes when opening new query on instance with Failover Clustering installed (not 2012 R2)

Hi,
I'm trying to start a new query in SSMS, but every time I click the "New Query" button on the tool bar or open a new query window by Object Explorer -> right-click -> Script as -> New Query Editor Window, SSMS hangs with (Not Responding)
and has to be restarted.
I'm running SSMS 2012 (v11.0.3381.0) on Server 2012 6.2.9200. I'm connecting to the primary node of an AlwaysOn Availability Group, and SSMS is located on the primary node itself.
I'm aware of KB2908806, which describes the same symptoms, but this only applies to Windows 6.3.x. Is there an equivalent fix for 6.2.x, or another workaround?
EDIT: To confirm behaviour: "New Query" works intermittantly, Script as ... to -> New Query Editor Window always crashes.

Hello,
there are many reasons your SSMS process would "hang", including bad server performance or internal SSMS processes being suspended due to locking.
When you open a new query window, what your SSMS application does internally is to open a new connection to your instance. You could be experiencing problems in your instance that are causing the logon process to take too long.
How does the bad performance issue generally happen? Is it only happening by connecting to the instance in SSMS? Does the same problem happen when you attempt to connect through an application, or by any other clients?
What happens if you try to connect to the instance through a remote computer?
Check your server's resource monitor for resource usage. Do you see any counters which could indicate performance problems?
Please post the results of @@Version for your server.
Can you open Activity Monitor in SSMS? How many sessions are listed? Does it also take a long time when you first log into the instance in SSMS, before opening a new query tab? Is the SSMS hanging for all databases when opening a new query window, or just
for the ones included in the availability group? Have you tried to connect to your instance by using a DAC connection?
DAC: http://technet.microsoft.com/en-us/library/ms178068%28v=sql.105%29.aspx
Do you have any server logon triggers? Are there any traces running other than the default trace? What are your server specifications? How many logical cores does it have? Is it being used in a production environment? Is there any CPU or I/O affinity set
for the instance? Whats your min/max memory settings? Run DBCC MEMORYSTATUS and post the results here.
Are there any error messages in the SQL Server errorlog? Is your server dedicated to the SQL Server Instance?
Run this query and post the results:
SELECT * FROM SYS.dm_os_process_memory

Copy regions and settings (plugins, mixing/volume/pan, etc) to new project

Greetings,
I am a brand new logic user and I am scoring my first film. I have two problems, one of which is addressed in the subject heading, and the other I will address now.
I didn’t realize until today that my synchronization settings were set to 25fps and the movie I am scoring is set to 23.98. This was causing huge problems when I would send the editor a cue, and he could not sync it up. I have read many posts, and I know that once I change my fps to 24, then it should be able to sync up just fine with the 23.98fps. However, because I was running my first few cues at the wrong fps, I now have to start these cues all over at 24fps. I was on apple care support via phone, and the kind person told me to set up a new project as “music for video (ntsc).” He then told me to copy the regions from my old cue and drag them into the new arrange window. I have done this, and here comes the questions:
1. After dragging the regions from the old file (where I was running at 25fps) to the current project (which is now set to 24fps), I could only copy the music- my volume, pan, and reverb plug-ins did not copy. How can I copy everything over so I don’t have to manually adjust my mixer and reverb settings? If you know the answer, please guide me through it...I am really new to Logic!
2. Now that I have copied the music to current project (24fps), is there a metronome conversion so I can change the old speed of running at 25 fps to 24 fps or should everything sync up automatically? My metronome is set to 104.2000 in the old cue.
I would appreciate any help I can get. Thank you.
Best,
Adam
MacBook Pro Mac OS X (10.4.10) Owned since May 2007

Hi Adam,
Since I don't work in film, I can't answer any of the SMPTE questions, but regarding question #1...
Go to the audio configuration window of the original cue. Under the Audio Configuration windows edit menu, select "copy".
Then open the new cue (the one set at 24fps), go to it's audio configuration window, and under the edit menu, select "paste".
This should copy all plug-ins. volumes and pans. Only do this is all your audio instruments between the songs are the same, which I will assume they are, because the audio configurations "paste" function will replace everything in the current song. But based on your description, this is what you want to do.

How to disable "Double Click on Tab Bar to Open New Tab" feature?

Since I upgraded to FF3 I've noticed this very annoying feature with tabs. If you double-click the 2-3 pixel wide bar just beneath tabs, it opens a new empty tab and sets the focus to that new tab (Which means I then have to go close that tab before going back to the tab I originally wanted). I happen to do this a lot by mistake (I go to click on a tab, but haven't clicked high enough, and of course, it doesn't change to the tab, so I unconsciously click again, which activates a new tab). I never open new empty tabs (alt-enter + middle click), and I have tabs to load in the background (i.e. to not *steal* the focus), so everything about this feature serves as an annoyance to me. Is there anyway to disable this "feature" (Either by disabling it, or making the width of the bar 0. I don't care either way)?
== This happened ==
Every time Firefox opened
== I upgraded to FF3

You can hold down the mouse button on a scroll button a bit longer to initiate scrolling multiple tabs. 
Otherwise you need to wait longer between the clicks on the scroll button. 
If you click twice on a tab bar scroll button too fast then you perform a 'page up' or 'page down' and the tabs scroll a tab bar width like you noticed.
I'm not sure what you mean with new feature because this is the behavior in Firefox 3.6.x as well.

How do I forces FF 23 to open maximized, not full screen, but maximized, both on start up and when opening new windows?

Firefox 23 does not open maximized nor does it open new windows maximized. As such I have to manually maximize each window.
Run is set to maximized in the shortcut properties, yet it still opens in a normal or less than normal size window.
Older versions open maximized with no problem. I have Profile manager configured so that I can run multiple versions at the same time and everything opens maximized except FF 23.
is there some setting in the about:config interface or is this a genuine BUG in the latest version? Any help would be appreciated greatly.
Also can you tell me how to modify the title bar text/icon/etc as well as where to find the icon or portable network graphic (png) file for the main-window.ico or direct me to appropriate knowledge base articles for modifying both.

My localstore.rdf file was fine. The problem was caused by two plug-ins that Mozilla shows as being compatible with Firefox 23, when in fact they both cause undesired side effects.
Maybe the employees of Mozilla should actually test plug-ins before they allow them to be available for download or worse yet, recommend them.
And if any of the in-house developers had a clue they would stop removing old lines of code from Mozilla products so that new versions of Firefox would still be compatible with older plug-ins and extensions people would still like to use.
I had to remove recommended extensions and copy code from older versions of FF and NS and modify settings in about:config to allow older extensions to work to correct the problems and get Firefox to work the way I need it to. All in all I have over forty hours invested in modding FF at this point just to have it function the way it used to.
Unfortunately, since I still can't get buttons designed to open .URL links from the toolbar to work as they did in the past I have a feeling I'll be returning to older code sources to find more answers.
Lucky for me that I have every browser going back to NCSA Mosaic available to me, so every bit of code from the present till back before Mozilla existed is include in my knowledge base. It's a shame Mozilla doesn't keep such a reference available for it's users or apparently it's in house developers and staff.
Maybe I'll even re-enable the splash screen for Firefox since the only available plug-in for that doesn't appear to work with Version 23 either, even though once again the compatibility adviser says it does
It's truly sad that the result of Marc Andreessen's and James Clark's work and Netscape in general became the spawning Mozilla. What used to be a great browser and an acceptable replacement for Netscape, has become a joke. So much for all the hard work and effort made by Dave Hyatt and Blake Ross as well.
I guess that's what one should expect from the developers that are a part of generations X, Y, and Me. The attitudes associated with those generations show in the lack of thought, consideration, and ingenuity that have been a part the last several versions of FF, not to mention, the copying of features from Chrome.
When the only original idea to come out of Mozilla of late is to remove or disable features people have used and counted on for decades, the I don't care, I don't know, and me, me, me attitudes of so many from the aforementioned generations is truly evident in the last twenty incarnations of Firefox. Not to mention the attitudes and unhelpful nature of the responses users encounter when asking for help.

No cursor in address bar after opening new tab

Hi,
after installing FF 29.0.1, when I open a new tab the cursor isn't focused on the address bar, or anything else for that matter.
If I run FF in safe mode it works and the focus is on the address bar. If I disable all my extensions manually and start FF in normal mode it doesn't work.
I looked at that thread https://support.mozilla.org/en-US/questions/972359 already, but that didn't help much.
What can I do to fix this?
Cheers

Thanks for answering.
Just tried it now and unfortunately it didn't help. Disabled both, but still no cursor in the address bar after opening a new tab.
I won't be around my computer for a few days, so it'll take me some time to respond.

When opening new tab, don't select URL bar

I changed the browser.newtab.URL entry in about:config from about:newtab to http://www.google.com/ncr. My default action for opening a new tab was "ctrl-t", followed by "alt-home" (and my homepage is http://www.google.com/ncr), so I thought less keypresses is better :)
Now, when I open a new tab, it does load Google, however, it still highlights/selects the URL bar (I believe this to be default behiour). This hinders my workflow, as I still have to click on the google search bar :(
When I go to my home page (click "Home" button or press "alt-home") it doesn't highlight the URL bar, but allows me to instantly type my query into the Google search bar. This gives me hope that what I want is possible.
Could someone tell me that it is indeed possible?
Ps. I am deliberately using firefox 22.0 and upgrading is not an option for me, even if this was the solution. Any other solution would be highly appreciated.

Instead of using the ''browser.newtab.url'' preference, configure what opens in a new tab with the Custom New Tab add-on.
* https://addons.mozilla.org/firefox/addon/custom-new-tab/

RoboHelp 7 crashes when creating new project with files from VSS

RoboHelp crashes when I create a new project and choose to get existing files from Visual Source Safe to load into the project. Does anyone have a solution to this problem or a suggestion as to why this may be happening? I'm attaching the errors associated with the crashing.
Also, we have a very large Help system (985 topics) which compiles into a 46 MB chm file. Is there a maximum suggested topic size (per topic) and a maximum suggested number of topics per project? Could this be part of the reason RoboHelp is crashing? We've always had a large Help system since we started using RoboHelp several years ago but the crashing is a more recent problem.
Thanks,
Carissa

I had the same issue then I found out all you have to do is to set the default view to List before opening any previous or new project and it worked, credit goes to this user below who found the solution.
ahmedMac25
I was able to resolve by workaround:
1. Closed all open applications
2. relaunch Finder
3. run sudo find / -name ".DS_Store" -exec rm {} \;
4. this removes all .DS_Store old files on the computer
5. launch finder and set default view to "LIST VIEW" as shown here:http://macs.about.com/od/usingyourmac/ss/Setting-Finder-Views-For-Folders-And-Su b-Folders_2.htm
5. rerun the offending application and file chooser works

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

When opening new tab, how to make me able to type in the adress bar directly without clicking on it? -- (about:config reset and add-on doesn't work)

Hi all,
Need a help relating New Tab on Mozilla.
I want to be able to directly type in the address bar everytime I open a new tab in Mozilla, without clicking anything. To be clearer, it means that everytime I open the new tab, the blinking cursor is already on the address bar.
What's happening right now is everytime I open new tab, the cursor is not placed anywhere--not on the search bar on the page, not on the address bar. I should put the cursor somewhere to do something.
I tried using the about:config reset (1) and installing custom new tab (2), but both do not work.
When I tried the about:config reset the Reset button is not highlighted (I assume it means it's default already), and the Custom New Tab doesn't yield in different result.
What confuse me is 2 days ago my Mozilla works just fine. Everytime I opened a new tab, the blinking cursor was on the address bar and I was able to type directly.
Thank you and appreciate the help!!
Note:
(1) about:config reset:
- Type about:config into the address bar and press Enter.
- To bypass the warning, press the big button labeled "I'll be careful, I promise!".
- In the search box, paste browser.newtab.url
- In the search results, right-click browser.newtab.url and choose Reset.
(2) Custom Add On reset:
- Install Custom New Tab. = https://addons.mozilla.org/firefox/addon/custom-new-tab/
- Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
- Next to Custom New Tab, click the Options button.
- Set whatever page you want to open in each new tab (about:newtab is the default; about:home is the default home page), and make sure "Place focus in URL bar" is not checked.

''philipp [[#answer-669209|said]]''
<blockquote>
ok, as a follow up i'd recommend disabling half of the addons & restarting the browser - if the problem continues disable the other half & continue until you've narrowed it down to the culprit...
</blockquote>
Hi Philipp,
I read the link you copied on the first post and also tried your recommendation above. None seem to work. Even if I disable all add-ons, the problem still persists.
One other info, this problem seem to appear after I installed several program yesterday. These programs apparently installed other programs that set my homepage and main search engine to a particular website. But I installed all of these programs already. Would that be a cause of the problem?
Thanks.

Drummer region starts with fill on 1 bar when open new project.

Similar Messages

Maybe you are looking for