Drums tracks won't show in tracks window

Hey mates,
Just started to work with NI Modern-Drums.
I wanted to be able to edit every single drum, so I've opened it in "multi-out" option...
My question is:
I can see only the kick track in the main window. How can I make the other 15 tracks show in the main window? (it shows them only in the mixer window...)
Here is the screenshot that describes it better:
http://postimg.org/image/9z6nw4etj/full/
Thanks a lot and sorry about this newby question
Gozal007

Thanks, it helped me.
What about the "future"? (after I recorded my electronic drums)
How do I convert each of these drum aux tracks to audio? (or should I stay only with the aux?)
Gozal007

Similar Messages

I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

In iTunes, select the iPod in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab.
There should be a checkbox that says Enable disk use. Check it and Apply the change. It should now appear in Windows, when the iPod is connected.
NOTE: When Disk Use is enable, you have to eject the iPod (in iTunes) before physically disconnecting it from computer.

HT1363 Ipod won't show up in Windows Vista

Have a IPOD Classic, and for Windows Vista (Business) Edition, it does do the "tone" for Windows Vista,
But it won't show up in Device Manager at all. Tried reloading Itunes and that didn't help.
Also tried moving to other USB ports and that doesn't help either.
Is there any way to get the USB drivers into Vista, since there is "no download for Microsoft Vista Drivers," that I've located any where?
Or will I need to move to Windows 7, but not sure that will help anything at all either?
Thanks for any help that anyone has.

Hey Stevestone624,
I would follow the steps in this article if your iPod doesn't appear in iTunes and also doesn't appear as a disk drive in My Computer:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Welcome to Apple Support Communities!
Cheers,
Delgadoh

IPod Classic won't show up in Windows or iTunes?

I've recently gotten an iPod classic, and when I went to sync it to my iTunes, it wouldn't show up in iTunes or Windows. It won't charge either, and my iPod doesn't say it's connected. I plugged in my iPod Touch and my iPhone, and they both synced just fine and were recongized by iTunes. I've tried troubleshooting, uninstalling and reinstalling iTunes, updating drivers, and even downloading older versions of iTunes, but to no avail. I hooked it up to another computer that was running an older version of iTunes, and it worked perfectly. I don't understand what's wrong, and it's really frustrating me. How do I fix this?

Refer to this article:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716

Mail won't show new message windows

This is weird.
I needed to email a photo to a friend. I drug the photo from iPhoto to the Mail icon in the dock and nothing happened (a new message window didn't pop up with the photo attached) I tried this 3 times and still got nothing. I swiped to another desktop (in Lion) and i could see the new message windows, all three of them, with the picture. When I landed on a space they disappeaered again. When I swipe to a new space they appear and then disappear when I land on that space.
I've shut mail down but haven't done a full restart. Any other ideas why this didn't work and then now how do I fix my problem?
Thanks…
Here's a picture of what I'm talking about…I don't know why it's upside down?!

I've never seen anything like this reported before. Verify/repair your disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
If the problem persists, proceed as follows:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that the Console application displays the contents of both system.log and console.log.
3. Try to reproduce the problem, and look at the bottom of the Console windows for messages that could have been written there as a result. Do you see anything that could provide a clue as to what's going on?
Now, try this:
1. Go to Apple Menu > System Preferences > Accounts, and create a new user account for testing purposes.
2. Either log out of your main user account or just quit Mail so that it does not interfere with the other user account.
3. Log in as the newly created user and set up Mail anew there. Does the problem happen there as well?

Ipod won't show up in windows or itunes

hey; i just got a replacement ipod back from apple; the directions say that it is formatted for a Mac, and needs to be reformatted for windows. The problem is that in my new Vista computer, it will not recognize it at all. Any advice?

Refer to this article:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716

SD card won't show up on windows 8

I have a Kodak 8GB SD card that I use for my Nikon coolpix camera. When I put the SD card into the slot nothing happens. Not only that, but I can't find it anywhere on my Windows 8. I have to use my brothers cpu to synch my photos/videos then use my flashdrive to bring them onto my cpu. Is there an easier way to do this? Thanks

Hi,
What is your machine ? it has Windows 8 pre-installed or from upgrade ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPOD not showing up in WINDOWS XP

I have the old 10gig IPOD(non click wheel), it's about 3 or 4yrs old now. For some reason, when I plug it into my computer via firewire, it won't show up in windows, my computer or at all or itunes. It has worked in the past, but all of a sudden it stopped in the past few months. It's frustrating!!! I've reset it, put it in disk mode and it still doesn't solve the problems...anybody have any ideas? Thanks
eMachines T6212 Windows XP

hmmmm. it might be worth checking to see if your Windows is happy with your FireWire card at the moment:
Making sure your Windows PC recognizes your FireWire or USB card

Showing the results window after termination

Hi all,
When I terminate my batch sequence execution in TS 4.0 using "RunState.Engine.TerminateAll()", it shows grayed-out windows and won't show the results window, even though it saves the results into an XML file on disk.
Is there a way I can show the results window to the operator after the sequence is terminated?
Many thanks,
Chris
Solved!
Go to Solution.

If you look in your model you will find a step called Read Entire Report. This is just making an activex call to Report.Load. This is what displays the report at the end of an execution. If this does not get called no report will get loaded. Since you are terminating then no report is getting loaded. In fact if you don't have on the fly reporting on then the html files that make up each thread of a multithreaded batch run won't contain any data which will result in no report.
If you use the ProcessCleanup callback you should be able to load the report in there.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Clicking on Touch Tracks object won't re-open Touch Tracks window

Hey Everyone,
If I create a Touch Tracks object in the Environment, a new Touch Tracks window appears. If I close that window and then double-click on the newly created Touch Tracks object to re-open the Touch Tracks window (like the manual tells me to), the window will not re-open. I'm on day three of trying to figure this out. Double-clicking on all other objects in the "All Objects" layer of the Environment works (takes you to where the clicked object exists in a different layer or whatever is supposed to happen). But double-clicking on this specific object does nothing.
Also, if double-clicking just won't work, does anyone know a different way to re-open the Touch Tracks window?
Thanks!

I have the same problem as well with an itouch that I purchased for my niece. The first one I bought, the apps never worked after I downloaded and some songs wouldn't play either. So last Monday I exchanged it and got a new one. The apps worked on this one along with the music until she unwrapped it Christmas morning (about 4 days). Now the app will flash up then quickly return to the home screen. I also received a touch for Christmas and put the apps on mine and so far am NOT having that problem, so I don't think it's a computer problem. I scheduled a support call with apple but it will be January 4th before they can get to me! If anyone can help, it would be greatly appreciated!

How do you export a drum track to Music XML from Logic Pro

I have a song in Logic Pro with a compound drum track that consists of a Drummer subtract as well as a manually written drum track using the same kit (for specific fills and kicks) as well as a drum line with auxilliary percussion. I kinda figured there was no way to combine the subtracts, so I am OK exporting each to Music XML separately (although if someone knows how to combine, I am all ears). I created a new software instrument using the same drum kit as the Drummer track and options-dragged the Drummer track to the new software instrument to convert it. However, when I view the Score Editor window for ANY of the three drum tracks, it does not come up in drum notation, but in bass cleff. The Style is blank and I don't know how to change it to drums.
I want to export to MusicXML to give my drummer music, so I am exporting this to Musescore.
Does anybody know how to export drum tracks properly? I am using Logic Pro 10.0.7
Thanks in advance!

Thanks for the quick response!
I got the Join part, but when I look at the Score view for the song below I don't get the characteristics editor your screenshot shows (see attachment one). However, I can pull this up if I select on the regions in the track I want and select Window -> Score Editor. However, under Style, I can select the pulldown with a bunch of pre-defined options, non-of which are "#Drums". How does one put #Drums into the Style field (see second attachment)?

Graphics bug making software unusable. "Ghosting" effect whenever scrolling through piano roll or tracks window

As stated in the title, a bug has started plaguing my copy of Logic Express 9 ever since I updated to Yosemite. Whenever I scroll back and forth through the tracks window or the piano roll, this sort of ghosting effect appears and makes manipulating anything onscreen impossible. I have found no other mentions of this problem on the support forums, but this issue has made the software completely unusable. Here is a screenshot of the bug:
If anyone has experienced this problem and found a fix, please let me know.
thanks

Thanks Erik,
If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
As an aside....
I recall how all the 'naysayers' prior to LPX (and in some cases, since...) were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

Software loops sound different in Browser than in track window

After dragging some of my software loops (all .caf's) from the browser to the track window, the sound does not play correctly. For example, a harpsichord in the browser sounds fine, but when I drag it into the track space, the resulting midi-file sounds more like some type of an organ when played. I'm using the same key and tempo.
If I play (doubleclick) the .caf from the "Apple Loops for GarageBand" library file, it plays fine from QT Player.This is only apparent on some loops...not all.....I do have a midi keyboard attached, but the same thing happens if it is disconnected.
Thanks for any help!

Try and Re-Index all your Loops?
Go to your Loops Library, and right click in the actual loops section at the bottom where it shows all your loops. Click on the Re-Index User Library. That should put everthing in place again, if you still have all the files.
P.S.
My loops were also sounding very funny, almost chorus like. When I'd put the loop into my timeline it would sound normal. Once I re-indexed everything the files sounded fine again, in both the Loops Library and on my timeline.
Good Luck

When I export a AAF file from Protools 9 and Import the file into Logic ProX the drum track is out of sync. I created the drum loop using NI Maschine. Has anyone else seem this??

When I export an AAF file/project from Protools 9 using an external drive and import the AAF into Logice Pro X the drum track does not play correctly. It is out of sync with the rest of the track. I created the drum loop as a plugin using Native Instruments Maschine. Has anyone else had this problem?? Also how would I go about exporting the midi tracks from the Protools session. The midi track does not show when the file is imported to Logic Pro X. The midi data should export with the AAF file correct??

Are you using any plugins in Logic?
In Preferences/Audio under the General tab, how do you have the plug-in-latency compensation set?

In Logic Pro, trying to import a drum track from the bin to arrange area, the 'follow loop' box does not appear in the inspector

imported a drum track from bin to arrange area. It will not follow tempo of the project even though it was recorded in this project. The 'follow tempo' box in the inspector does not appear even though it is present on other tracks in the file.
how do I set up the track so the 'follow tempo' box appears in the inspector?

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

Drum track audio to midi

Hello
How to transform my kick drum audio track into a midi track ? don't know if it's possible ... i've seen the "audio to score" thing but no "audio to beat"
thanks
bontempi

Audio to Score is the way to do this from within Logic.
Do a search here, as this has been discussed a lot, but essentially, you'll open the Sample Edit window, on, say, the snare drum track, and open Audio to Score.
Adjust the settings so that the vertical black lines represent the snare hits.
Let Audio to Score to it's thing, and then open the MIDI region that it created, and using the Transformer, set all the varied MIDI notes to the same fixed pitch that your snare sample will play. You can also do the same with velocities.
I could go into more detail, but I and others have already done so numerous times on this forum, so the detailed info is available. Just do a search here.
Also, for 50 bucks, you can eliminate the need to use audio to score altogether, by getting the apTrigga plug-in.
http://www.apulsoft.ch/aptrigga/
Drumagog is also another great trigger plug-in, although more expensive.
Holler back if you have any problems with Audio to Score though. it's actually fairly easy to do, once you know the steps involved, and have done it a couple of times.

Drums tracks won't show in tracks window

Similar Messages

Maybe you are looking for