Drvconfig/add_drv triggers SD ,but not pseudo

Hi all,
My problem must be simple to solve but iam not finding enough info to solve this problem.
drvconfig triggers SCSI disk driver(SD) to see newly added disks, but it doesn't trigger my pseudo-driver to create new minor nodes for newly added disks on a scsi daisy chain.
Please let me know ASAP.
thanks
kiran

Maybe there is something wrong with your driver.conf(4) file. You might like to have a look at the ramd pseudo device driver in the sample drivers, see http://soldc.sun.com/developer/support/driver/src/SUNWdrvs-8.html.
Note that if you installed your driver in /usr/kernel/drv, you didn't need to re-install. Just boot with -as as the argument and then, when you are prompted to enter the default directory for modules, just reply with "/platform.... /kernel", leaving out /usr/kernel, and accept the default values for the remaining prompts. Once the system has booted you can replace/remove your driver.

Similar Messages

  • Tcode CS02 changed triggers idoc but not CS21 using BD21

    Hi
    when bom is changed using CS02 then when using BD21 triggers IDOC for the message type
    but
    when bom is changed using CS21 then it does not trigger idoc using BD21
    I checked the code for BD21 message type function
    I found that change pointer (bdcp2-object id ) is different for both transaction CS02 and CS21.
    CS02 is updating object id with mast-stlal but this entry is missing for CS21
    I am not able to find how the table (BDCP , BDCP2) for change pointers is updated for bom change.
    Can you please let me know the patof code which i should check for updating  the change pointers entries in BDCP , BDCP2 for bom

    I checked the sap system is creating enteries in cdhdr change pointer usin fm STUE_V_WRITE_DOCUMENT . I checked that when used TCODE CS05 the entry is updated for stlal as
    In CS02  the entry for OBJID hold the value for stlal (Alternative BOM)
    ie 500M0001064220110914  01            20110914
    In CS21  the entry for OBJID does not hold the value for stlal (Alternative BOM)
    ie 500M0001064220110913                20110913 (entry missing for stlal)
    It clears the value of stlal . Is ther any sap note or configration setting for CS21 to get the value for alternative bom .

  • Service desk-Email Triggering Action is not getting scheduled

    Hi,
    I have scheduled an action wherein a mail will be triggered to reporter whenever the status changes.
    But this is not happening inspite of all the proper settings maintained in Conditions for Actions.
    This thing is working properly in my Development system but not working in Production system
    I have tried all the possibilities but still not able to reach any solution.
    Could you please suggest me something.?
    Thanks
    Ritu

    Hi,
    I checked SCOT settings too.
    The action is not getting scheduled only so email triggering will not take place.
    I cant see the action in Transaction Data of support message.
    Please suggest your solution
    Thanks
    Ritu

  • Is there any way to force a PXI6115 to generate AI Start Trig on PFI0 but not actually trigger on it?

    I am using a PXI chassis with 10 6115's and a 6608 counter/timer. I need to use analog triggering on one of the 6115 AI channels. The particular channel will depend on the test setup, so I can't just pick one and hard-wire it. This analog trigger will be the master timing reference for all of the boards.
    However, I need to trigger the 6115's at different times (e.g., trigger three at the same time and seven at some later time) so I'm routing the AI Start Trigger from whichever is the trigger channel (one of the first 16 channels) to RTSI0. The first five counters are then GATEd on RTSI0 and the counter OUTs are hardwired to the 6115's PFI0s in groups of two. So,
    basically, one of the 6115s sends AI Start Trigger to the five counters which, in turn, generate five delayed triggers that are sent to the 10 6115's.
    My problem is that I can't use a zero delay on the counter, so I can't get the 6115s to trigger at the same time, if need be. Whichever one generats the analog trigger will always be slightly ahead of all of the others that I would like to trigger at the same time.
    So my question is this: can I somehow force one of the 6115's to generate the AI Start Trigger across RTSI0 but not actually trigger itself until it gets the trigger back from the counter/timer? This way, the delay will still be there but all of the boards can get a simulataneous trigger if need be.
    Thanks,
    RGA

    RGA,
    Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
    Spencer S.

  • Can log into Yosemite server (4.0) VPN service with a Mavericks client, but not Yosemite client

    Sever Info:
    Yosemite Server 4.0 running on a late 2009 Mac Mini with 8 GB RAM with vpnd service enabled
    The server was upgraded to Yosemite - not clean install - this may not matter (see below)
    Airport extreme router with standard VPN UDP ports for L2TP forwarded to server (500, 1701, 4500)
    Client info:
    MB Air 13" early 2014 with 8 GB RAM
    Yosemite
    Mavericks 10.9.5 running as a Parallels virtual machine (don't ask - I need it to run an app for work that is not yet compatible with Yosemite)
    OD service is NOT running - no VPN connections ever occurred from ANY client with this service running - OD is not needed in my case fortunately
    With the OD service off, I can connect via the Mavericks virtual machine just fine, but not with Yosemite. With Yosemite, the ppp connection appears to occur, but server config requests appear to fall on deaf ears (client side doesn't appear to respond) until the connection times out. Can't figure out what triggers the client response to a server config request. Client side complains about no route to host and IP addresses don't get assigned to the connection.
    The connection happens successfully in an eyeblink with the Mavericks client. Same username/password/shared secret in both instances.
    Tried a generated .vpnconfig from the server, this also did not work.
    It's possible that it is an auth problem, but can't figure out how the process occurs or what may be going wrong. There does not seem to be an obvious way to increase the granularity of the logging such that it might give other hints - at least that I can find. I found plenty of references to VPN issues when people upgraded from Mountain Lion to Mavericks as well as work arounds for this. I tried the most promising looking of those - no love. I reverted everything back to stock install since I could at least connect with Mavericks.
    If log entries would be helpful, they are included below. I've stared at them long enough - perhaps a new set of eyes can provide a hint.
    In addition, I can find no documentation regarding the VPN service in Yosemite server so as to get a clue as to whether there have been changes in racoon since Mavericks.
    Thanks in advance for any suggestions. I would be glad to supply any other info needed for an accurate diagnosis .
    Pat
    ==
    Regarding the Yosemite client connection in the Yosemite server VPN Service log:
    2014-10-21 12:18:30 MDT
    Incoming call... Address given to client = 192.168.1.228
    Tue Oct 21 12:18:30 2014 : Directory Services Authentication plugin initialized
    Tue Oct 21 12:18:30 2014 : Directory Services Authorization plugin initialized
    Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 12:18:30 2014 : L2TP incoming call in progress from 'my.dotted.quad.address'...
    Tue Oct 21 12:18:30 2014 : L2TP received SCCRQ
    Tue Oct 21 12:18:30 2014 : L2TP sent SCCRP
    Tue Oct 21 12:18:30 2014 : L2TP received SCCCN
    Tue Oct 21 12:18:30 2014 : L2TP received ICRQ
    Tue Oct 21 12:18:30 2014 : L2TP sent ICRP
    Tue Oct 21 12:18:30 2014 : L2TP received ICCN
    Tue Oct 21 12:18:30 2014 : L2TP connection established.
    Tue Oct 21 12:18:30 2014 : using link 0
    Tue Oct 21 12:18:30 2014 : Using interface ppp0
    Tue Oct 21 12:18:30 2014 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 21 12:18:30 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:33 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:36 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:39 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:42 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:45 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:48 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:51 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:54 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:18:57 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
    Tue Oct 21 12:19:00 2014 : LCP: timeout sending Config-Requests
    Tue Oct 21 12:19:00 2014 : Connection terminated.
    Tue Oct 21 12:19:00 2014 : L2TP disconnecting...
    Tue Oct 21 12:19:00 2014 : L2TP sent CDN
    Tue Oct 21 12:19:00 2014 : L2TP sent StopCCN
    Tue Oct 21 12:19:00 2014 : L2TP disconnected
    2014-10-21 12:19:00 MDT
       --> Client with address = 192.168.1.228 has hungup
    ==
    Client side log for this connection using the Yosemite client:
    Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 14:32:08 2014 : L2TP connecting to server 'myserver.com' (my.dotted.quad.address)...
    Tue Oct 21 14:32:08 2014 : IPSec connection started
    Tue Oct 21 14:32:09 2014 : IPSec connection established
    Tue Oct 21 14:32:10 2014 : L2TP connection established.
    Tue Oct 21 14:32:10 2014 : L2TP set port-mapping for en0, interface: 4, protocol: 0, privatePort: 0
    Tue Oct 21 14:32:10 2014 : Using interface ppp0
    Tue Oct 21 14:32:10 2014 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
    Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
    Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
    Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
    Tue Oct 21 14:32:25 2014 : write: No route to host
    Tue Oct 21 14:32:25 2014 : write: Host is down
    Tue Oct 21 14:32:28 2014 : write: Host is down
    Tue Oct 21 14:32:28 2014 : write: Host is down
    Tue Oct 21 14:32:31 2014 : write: Host is down
    Tue Oct 21 14:32:31 2014 : write: Host is down
    Tue Oct 21 14:32:34 2014 : write: Host is down
    Tue Oct 21 14:32:34 2014 : write: Host is down
    Tue Oct 21 14:32:37 2014 : write: Host is down
    Tue Oct 21 14:32:37 2014 : write: Host is down
    Tue Oct 21 14:32:40 2014 : LCP: timeout sending Config-Requests
    Tue Oct 21 14:32:40 2014 : Connection terminated.
    Tue Oct 21 14:32:40 2014 : L2TP disconnecting...
    Tue Oct 21 14:32:40 2014 : L2TP error sending CDN (Host is down)
    Tue Oct 21 14:32:40 2014 : L2TP clearing port-mapping for en0
    Tue Oct 21 14:32:40 2014 : L2TP disconnected
    ==
    Pertinent client side log for connection of Mavericks client to Yosemite server:
    Tue Oct 21 13:29:13 2014 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
    Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
    Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
    Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
    Tue Oct 21 13:29:21 2014 : local  IP address 192.168.1.229
    Tue Oct 21 13:29:21 2014 : remote IP address 192.168.1.2
    Tue Oct 21 13:29:21 2014 : primary   DNS address 192.168.1.2
    Tue Oct 21 13:29:21 2014 : secondary DNS address 8.8.8.8
    Tue Oct 21 13:29:21 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 10.0.1.38), current interface setting (name: ppp0, family: PPP, address: 192.168.1.229, subnet: 255.255.255.0, destination: 192.168.1.2).
    Tue Oct 21 13:29:21 2014 : Committed PPP store
    Tue Oct 21 13:29:21 2014 : Committed PPP store
    Tue Oct 21 13:52:32 2014 : [DISCONNECT]
    Tue Oct 21 13:52:32 2014 : Hangup (SIGHUP)
    Tue Oct 21 13:52:32 2014 : Connection terminated.
    Tue Oct 21 13:52:32 2014 : Connect time 23.4 minutes.
    Tue Oct 21 13:52:32 2014 : Sent 2674664 bytes, received 10680854 bytes.
    Tue Oct 21 13:52:32 2014 : L2TP disconnecting...
    Tue Oct 21 13:52:32 2014 : L2TP clearing port-mapping for en0
    Tue Oct 21 13:52:32 2014 : L2TP disconnected
    ==
    Regarding the Mavericks client connection in the Yosemite server VPN Service log:
    2014-10-21 12:09:48 MDT Incoming call... Address given to client = 192.168.1.226
    Tue Oct 21 12:09:48 2014 : Directory Services Authentication plugin initialized
    Tue Oct 21 12:09:48 2014 : Directory Services Authorization plugin initialized
    Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
    Tue Oct 21 12:09:48 2014 : L2TP incoming call in progress from ‘my.dotted.quad.address’…
    Tue Oct 21 12:09:48 2014 : L2TP received SCCRQ
    Tue Oct 21 12:09:48 2014 : L2TP sent SCCRP
    Tue Oct 21 12:09:48 2014 : L2TP received SCCCN
    Tue Oct 21 12:09:48 2014 : L2TP received ICRQ
    Tue Oct 21 12:09:48 2014 : L2TP sent ICRP
    Tue Oct 21 12:09:49 2014 : L2TP received ICCN
    Tue Oct 21 12:09:49 2014 : L2TP connection established.
    Tue Oct 21 12:09:49 2014 : using link 0
    Tue Oct 21 12:09:49 2014 : Using interface ppp0
    Tue Oct 21 12:09:49 2014 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 21 12:09:49 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
    Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
    Tue Oct 21 12:09:49 2014 : lcp_reqci: returning CONFACK.
    Tue Oct 21 12:09:49 2014 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
    Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
    Tue Oct 21 12:09:49 2014 : sent [LCP EchoReq id=0x0 magic=0x4bc40d9f]
    Tue Oct 21 12:09:49 2014 : sent [CHAP Challenge id=0x73 <074a110a5e0620296b1937345c34090e>, name = “myserver.private”]
    Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoReq id=0x0 magic=0x71598937]
    Tue Oct 21 12:09:49 2014 : sent [LCP EchoRep id=0x0 magic=0x4bc40d9f]
    Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoRep id=0x0 magic=0x71598937]
    Tue Oct 21 12:09:49 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
    Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
    Tue Oct 21 12:09:54 2014 : CHAP peer authentication succeeded for somelocaluser
    Tue Oct 21 12:09:54 2014 : DSAccessControl plugin: User 'somelocaluser' authorized for access
    Tue Oct 21 12:09:54 2014 : sent [IPCP ConfReq id=0x1 <addr 192.168.1.2>]
    Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 21 12:09:54 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
    Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
    Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-NAK
    Tue Oct 21 12:09:54 2014 : sent [IPCP ConfNak id=0x1 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
    Tue Oct 21 12:09:54 2014 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::021c:42ff:febf:bf66>]
    Tue Oct 21 12:09:54 2014 : Unsupported protocol 0x8057 received
    Tue Oct 21 12:09:54 2014 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1c 42 ff fe bf bf 66]
    Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x1 <route vers 16777216> <domain vers 16777216>]
    Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfRej id=0x1 <route vers 16777216>]
    Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfAck id=0x1 <addr 192.168.1.2>]
    Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfAck id=0x1]
    Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
    Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-ACK
    Tue Oct 21 12:09:54 2014 : sent [IPCP ConfAck id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
    Tue Oct 21 12:09:54 2014 : ipcp: up
    Tue Oct 21 12:09:54 2014 : found interface en0 for proxy arp
    Tue Oct 21 12:09:54 2014 : local  IP address 192.168.1.2
    Tue Oct 21 12:09:54 2014 : remote IP address 192.168.1.226
    Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
    Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
    Tue Oct 21 12:09:54 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.1.2), current interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
    Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x2 <domain vers 16777216>]
    Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfAck id=0x2 <domain vers 16777216>]
    Tue Oct 21 12:09:54 2014 : Received protocol dictionaries
    Tue Oct 21 12:09:54 2014 : Committed PPP store
    Tue Oct 21 12:09:54 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
        <domain: name private>
        <domain: name local>]
    Tue Oct 21 12:09:54 2014 : rcvd [IP data <src addr 192.168.1.226> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 21 12:09:54 2014 : sent [IP data <src addr 192.168.1.2> <dst addr 192.168.1.226> <BOOTP Reply> <type ACK> <server id 0xc0a80102> <domain name "local">]
    Tue Oct 21 12:09:57 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
        <domain: name private>
        <domain: name local>]
    Tue Oct 21 12:10:00 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
        <domain: name private>
        <domain: name local>]
    Tue Oct 21 12:10:03 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
        <domain: name private>
        <domain: name local>]
    Tue Oct 21 12:10:06 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
        <domain: name private>
        <domain: name local>]
    Tue Oct 21 12:10:09 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
        <domain: name private>
        <domain: name local>]
    Tue Oct 21 12:10:09 2014 : rcvd [LCP TermReq id=0x2 "User request"]
    Tue Oct 21 12:10:09 2014 : LCP terminated by peer (User request)
    Tue Oct 21 12:10:09 2014 : ipcp: down
    Tue Oct 21 12:10:09 2014 : sent [LCP TermAck id=0x2]
    Tue Oct 21 12:10:09 2014 : l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.1.2), deleted interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
    Tue Oct 21 12:10:09 2014 : L2TP received CDN
    Tue Oct 21 12:10:09 2014 : Connection terminated.
    Tue Oct 21 12:10:09 2014 : Connect time 0.4 minutes.
    Tue Oct 21 12:10:09 2014 : Sent 1003 bytes, received 646 bytes.
    Tue Oct 21 12:10:09 2014 : L2TP disconnecting...
    Tue Oct 21 12:10:09 2014 : L2TP disconnected
    2014-10-21 12:10:09 MDT   --> Client with address = 192.168.1.226 has hungup

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • [Solved] Starting applications locally but not SSH

    Ok, so.. argh..
    I'm normally good enough to figure these _basic_ things out but i'm bashing my head right now.
    https://wiki.archlinux.org/index.php/Autostarting
    i want to run startx when logging in locally on a tty, but not when i initiate a user-session via SSH.
    Normally i'd place profiling stuff in .bashrc (variables, user aliases etc) and place startx in say a tty1.conf or something under /etc/init.d but since Arch is running systemd and starting x is not a daemon per sae i'm all out of luck here.
    How do you guys normally startx? and how do you separate autostarting applications locally, remote etc?
    Ps. I've started stuff via .config/openbox/autostart so that's fine.
    I need X not to iniatate every ssh session :)
    Solution (one of many):
    This solution will not only work through all terminals (meaning you don't check the terminal name) it will also not rely on tty or session names, it will instead check if the source is running under a X window (:0) or from an IP (10.0.0.1).
    If non of the above it defaults to starting x.
    Note: It will not distinguish running under systemd aparently and it also doesn't take in account if you're relaying X via SSH i guess (havn't tried that tho but it's an assumption).
    sudo nano /etc/profile.d/gui.sh
    #!/bin/bash
    me=`who am i`
    case "$me" in
    *\(:0\)*) echo "Youre in X" ;;
    *\(*.*.*.*) echo "Youre in SSH" ;;
    *) startx ;;
    esac
    Last edited by Torxed (2013-06-12 07:24:46)

    jasonwryan wrote:
    You could also use lastlog to determine if you are logged in on a TTY or pseudo-terminal:
    ┌─[Veles ~]
    └─╼ lastlog -u jason | awk '/jason/ {print $2}'
    pts/9
    ┌─[Shiv ~ ]
    └─╼ lastlog -u jason | awk '/jason/ {print $2}'
    tty1
    # edit: or just grep it if you only need an exit status...
    This feels unpredictable right off the bat mainly because there's other services being found in lastlog, also if two people login at the exact same time and one of them get a "spike" in the process priority you'll end up giving the wrong sessiondata to the wrong user unless you check the username logged in against lastlog but that requires more processing power then a case/if clause from a single output source. Speed is everything, logic is next and everything else falls behind
    Tarqi wrote:
    What about /usr/bin/tty?
    .bashrc
    tty | grep tty && startx
    Edit: Check the DISPLAY Variable if you want to avoid starting multiply X-Servers. However, maybe $TERM might be another solution.
    Locally:
    [doxid@faparch ~]$ tty
    /dev/pts/1
    Remote SSH:
    [doxid@faparch ~]$ ssh [email protected]
    Last login: Wed Jun 12 02:27:53 2013 from 10.0.0.140
    Youre in SSH
    [root@lookabeaver ~]# tty | grep tty
    [root@lookabeaver ~]# tty
    /dev/pts/1
    Don't think this is a viable option.
    WonderWoofy wrote:
    I think ewaller meant cut and not -cut.  But even then, what he is suggesting is that you print characters 10 through 12.  So it highly depends on the output length and therefore the number of letters in your username.  If you has used something like this it would have worked:
    who am i | cut -d' ' -f2
    Might work, but you're probably feteching:
    [doxid@faparch ~]$ who am i | cut -d' ' -f16
    (:0)
    Last edited by Torxed (2013-06-12 07:15:09)

  • Gif is animated in Sent folder but not received by others as animated

    I've always used Entourage but would like to use Mail if only because it will send animated gifs. I sent one to myself at another (not .mac) address and received it in Entourage but it's quite different from what I sent. gif isn't animated and format is different (text was centered when sent but not received as such). Can anyone help me?

    All,
    Thanks for your reply. Worked with Basis as I do not have access to SOST/SCOT in production environment.
    @Abdullah: SCOT is correct. For all the e-mail messages the status is green. (Successfully Sent)
    @Rick: This is a custom application which triggers workflow. I can see the emails in SOST with status as successful.
    @Anjan: No emails in junk folder as well.
    @Swadhin: If we send a test email from SOST, it works fine. Me too suspecting the issue with user id. Working on it.
    @Rahul: Yes. Some users received the emails. Also email is maintained for WF-BATCH user.
    @Mike: Tried testing test email and it worked fine. No filters in SCOT. Exploring more options with basis/security.
    - Omkar

  • *RUNLOGIC call executes sometimes, but not others

    Hi all,
    I hope someone has insight into this problem.
    I have 2 applications, Sales & CostCenter, that each feed data into a Consol app. In both Sales & CostCenter, I use *DESTINATION_APP (both in default logic, and in a batch-mode logic) to post the values to Consol. All of this works fine.
    I also need the currency conversion logic in Consol to be triggered automatically, every time there is an update. I use *RUNLOGIC to do this, as the last step of the update.
    // From CostCenter -- Run the Consol curr conv
    *RUNLOGIC
    *APP=CONSOL
    *LOGIC=CurrConvCostCenter
    *ENDRUNLOGIC
    // From Sales -- Run the Consol curr conv
    *RUNLOGIC
    *APP=CONSOL
    *LOGIC=CurrConvSales
    *ENDRUNLOGIC
    Both of the CurrConv* logic files exist in Consol (and are identical except for a slightly different XDIM_MEMBERSET selection, before *INCLUDE'ing the core CurrConv logic).
    There is only this one *RUNLOGIC command in either of the logics -- no nesting, no sequential execution.
    My problem: it works perfectly fine from CostCenter, but not from Sales.
    I can see in the CostCenter logic debug log the complete CurrConvCostCenter data selections. On the other hand, in the Sales logic debug log, the log ends with the posting of LC values to Consol.
    When I remove all the earlier steps from the Sales logic, I can see that the problem is related to the fact that Consol's entity dimension is called "Entity" and in Sales it is "EntitySls".
    --> "Invalid Dimension : EntitySls"
    I tried referencing the Entity dim as follows (as per the admin guide) -- didn't work.
    // From Sales -- Run the Consol curr conv
    *RUNLOGIC
    *APP=CONSOL
    *DIMENSION Entity = %ENTITY_SET%
    *LOGIC=CurrConvSales
    *ENDRUNLOGIC
    --> "Invalid Dimension : EntitySls"
    I also tried the following (based on the Destination_App syntax), hoping it was an undocumented savior -- didn't work.
    // From Sales -- Run the Consol curr conv
    *RUNLOGIC
    *APP=CONSOL
    *RENAME_DIM EntitySls=Entity
    *LOGIC=CurrConvSales
    *ENDRUNLOGIC
    --> "Invalid Instruction: *RENAME_DIM EntitySls=Entity"
    And I can confirm that both CostCenter & Consol use the same "Entity" dimension, so that's why it works in one case and not the other.
    Does anyone have a solution?
    Regards,
    Tim

    Thanks for the replies, guys.
    Joost, I tried a few more *DIMENSION options (both EntitySls and Entity) and none of these seem to work.
    Marcel, that workaround is certainly a creative approach! If it comes to that extreme, I may use this option. However, I did want to include this in the default logic of the Sales app. My other options are either to replace EntitySls with Entity (a pretty massive undertaking at this point -- it'd be nice if this limitation were documented in the admin guide...) or else have the users execute the logic manually as a batch process.
    In the meantime, I recreated this in ApShell & filed a message with Support.
    What was also odd about this is that, when the ONLY command in the logic file is the RUNLOGIC command, I get an error message about invalid dimension. But when there are other commands (such as *DESTINATION_APP to transfer data from sales to consol), those execute cleanly... and then there's no error message relating to the RUNLOGIC. So it was a bit of a challenge to identify the problem.
    I haven't tested this to see what other dimensions have this same limitation. My instict tells me it's only entity/category/time that need to have the same dimension names, but I'll certainly test that before I design another set of apps where I'll want to do this auto-synchronization.
    If anyone else has info on that point, I'd be grateful to hear more.
    Regards,
    Tim

  • Mutating table exception on trigger with After Insert but not with before

    Hi
    I need to maintain some constraint on the table to have only one row for values of the columns but not by primary key constraint.
    Because in case of primary key the insert would fail and the rest of the operation would be discontinued, I cannot change in the somponent that inserts the row so I have to prevent that on the table I have.
    I created a before insert trigger on the table which checks if any row exists in the table with same column values as the one being inserted. if found I delete the rows and let the insert happen (w/o raising any error). if the rows do not exist then the insert shall be continued.
    I read at place that modifying the dame table in the trigger body shall raise a mutating table exception, but I donot get the exception when the trigger is fired.
    Just when I change the trigger to after insert trigger then the nutating table exception is thrown.
    Is it the right behavior i.e. the Before insert trigger does not raise the exception and only after insert does that, since I could not find the example for before insert triggers throwing such exception so I think it is better to confirm it before finalizing the implementation.
    Thanks
    Sapan

    sapan wrote:
    Hi Tubby
    I cannot user unique constraint because that would raise an exception upon violation and the third party component that is inserting in the table would fail.
    That component does some other tasks as well after this insert and if an exception is raised then those tasks would not be performed.
    Also I cannot change the component to ignore this exception.Well then, you're in a bit of a pickle.
    I'm guessing the trigger you have been working on isn't "safe". By that i mean that it doesn't account for multi-user scenarios. You'll need to serialize access to the data elements in question and implement some sort of locking mechanism to ensure that only 1 session can work with those values.
    After you work out how to do that it sounds as though you would be better served using an INSTEAD OF trigger (you'd need to implement this on a view which is made off of your base table).
    Here's one way you can work on serializing access to your table on a relatively fine grained level (as opposed to locking the entire table).
    Re: possible to lock stored procedure so only one session may run it at a time?
    Cheers,

  • Log - hostapd trying to update accounting statistics, station not found , ] trying to deauthenticate to station, but not authenticated

    I am seeing log entries and want to see is security problem.
     Log Message from AP xxx.xxx.xxx.xxx
    TIME                Priority  Process Id                Message 
    Sep 18 2014 11:0       3        hostapd[941]            trying to update accounting statistics, station not found
    Sep 18 2014 11:0       3        hostapd[941]            trying to deauthenticate to station but not authenticated 

    Hi mbalbuena
    you are not mentioning what kind of authentication (WPA-Enterprise, WPA-PSK,..) are you using for your wifi network. That could be related to RADIUS accounting feature (in case of WPA-Enterprise with RADIUS accounting enabled/checked) but I am not sure.
    But nevertheless of that I hope this is just information that:
    Some client wanted to authenticate to your network, but it fails. This resulted to explicit deauthentication of that client by your WAP (regardless of fact if client was really authenticated or not at beginning). Forced deauthentication makes sense for example in case, that client was successfully connected to your Wifi, but it fails to reauthenticate (yes, every client is challenged to reauthenticate regularly after defined period of time) for some reason - in this case forced deauthentication ensures that user will get kicked off from your Wifi network. That's my explanation of second Log line.
    First line is just triggered action resulted "deauthentication" process - i.e. gather accounting statistics of that client. But in your case it fails, because that client was never really connected to your Wifi network and thus there are no records in statistics table for him.

  • Master idoc is created but not communication idoc

    Hi Experts,
    Thrugh the change pointers i m sending the customer  master data through idocs ,
    there master idoc  is creating but not the communication idocs .
    it is not triggering the function module MASTER_IDOC_DISTRIBUTE.
    How to rectify this ,, please anybody asap..
    Regards

    Initially, check the Partner profiles(Sending and Receiving), port definitions and Distribution model(where the model view should be distributed).
    Check out for any filters added, enable change pointer also.
    Cheers..
    Santosh.
    <i><b>Reward Points for all Usefull Answers.</b></i>

  • Full list of MS SQL 2000 features that are supported in compatibilty 80 mode but not available in 2008 R2 compatibility 100

    Hello Everyone,
    Could you possibly suggest where I can find a full list MS SQL 2000 features that are supported in 2008 R2 compatibilty 80 mode but not available in  compatibility 100?
    Thanks
    SSIS question

    Hi Tom,
    What you are saying makes sense, if the compatibility level is 90 then the old ANSI joins are expected to be rectified.
    I wrote a script to check - it's an easy exercise, all you need is to loop through the catalog views and for each SP or scalar function run this command:
    set fmtonly on exec <object> set fmtonly on and in the catch block handle the error related to compatibility.
    For checkign the views similar thing set noexec on <select top 1 * from view> set noexec off.
    This works very fast as none of the code is actually executed.
    Caveat thought  triggers and table functions. I could not find the way how to check them. so will have to extract the DDLs and just check the text for old ansi joins. Not very reliable, but that's all I can think of at the moment.
    Any chance you know how to compile a trigger or table function without running.
    For table functions when I tried set noexec on they still asked for parameters, something I was trying to avoid.
    Thanks
    SSIS question

  • Certain music videos will not play in iTunes.  The music plays fine but not the video.  No picture.

    Certain music videos will not play in iTunes.  The music plays fine but not the video.  No picture.  Same with the iPod.  Other videos in the library play fine. Help.

    Regular playlists vs smart playlist does not make a difference. What I noticed is that some videos create this behavior and some not. I created 2 videos and 2 music playlists, one with 2 songs and 2 videos (that I encoded myself with Handbrake). Another list with 2 videos and 2 songs, videos encoded with Handbrake, but that I noticed they triggered the behavior. The first playlist played fine, with no problems. The second one, created the problem. When I look at the video, it is the same type of video (bit rate, audio channels, etc...) I don't see why it would do that.
    Later I will test: playing those videos in question and then selecting songs to see if they play.

  • Can you check for data in one table or another but not both in one query?

    I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
    ACCOUNT
    AccountID     Name   
    123               John Doe
    124               Jane Donaldson           
    125               Harold Douglas    
    MARKETER_ACCOUNT
    Key     AccountID     Marketer    StartDate     EndDate
    1001     123               10526          8/3/2008     9/27/2009
    1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
    1023     124               10541          12/03/2010     12/31/4712
    ARCHIVE
    Key     AccountID     Marketer    StartDate     EndDate
    1015     124               10526          8/3/2008     12/02/2010
    1033     125               10987         01/01/2011     01/31/2012  
    So my query needs to return the following:
    123     John Doe                        10526     8/3/2008     9/27/2009
    124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
    125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
    I'm unsure how to proceed in one query.  Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
    open CURSOR_ACCT
              select AccountID
              from
                     ACCOUNT A,
                     MARKETER_ACCOUNT M,
                     ARCHIVE R
               where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                    where M2.AccountID = A.AccountID),
                                                      (select max(R.EndDate) from Archive R2
                                                    where R2.AccountID = A.AccountID)
                   and upper(A.Name) like parameter || '%'
    <can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
    (parameter could be "DO", so I return all names starting with DO...)

    if I understand your description I would assume that for John Dow we would expect the second row from marketer_account  ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
    drop table account;
    drop table marketer_account;
    drop table marketer_account_archive;
    create table account (
        id number
      , name varchar2(20)
    insert into account values (123, 'John Doe');
    insert into account values (124, 'Jane Donaldson');
    insert into account values (125, 'Harold Douglas');
    create table marketer_account (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
    insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    create table marketer_account_archive (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
    insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account_archive;
    with
    basedata as (
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account_archive
    basedata_with_max_intervals as (
    select key, AccountId, MktKey, FromDt, ToDate
         , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
      from basedata
    filtered_basedata as (
    select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
    select a.id
         , a.name
         , b.MktKey
         , b.FromDt
         , b.ToDate
      from account a
      join filtered_basedata b
        on (a.id = b.AccountId)
    ID NAME                     MKTKEY FROMDT     TODATE
    123 John Doe                  10987 28.09.2009 31.12.4712
    124 Jane Donaldson            10541 03.12.2010 31.12.4712
    125 Harold Douglas            10987 01.01.2011 31.01.2012
    If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
    Regards
    Martin

  • HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync.  They show up on the itunes on my desktop and on my ipod, but not on the new iphone.  What do I need to do?

    I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod.  I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone.  Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store.  They appear on my itunes on the computer and ipod, but not on the iphone.  What did I fail to do or did I do incorrectly?

    This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Maybe you are looking for

  • How to sync older events?

    My isync works fine, but I can not sync older events 1, 2, 3 years back between iCal and my PDA. The limit is one month back! How can I freely define the sync time span? Please advise Powerbook G4 1.67 High   Mac OS X (10.4.6)   Nokia E61

  • PRT Error when accessing SAP Transcation

    Hello Everyone.. I have an SAP transcation which is accesed from Portal through ITS. I am getting Portal Runtime error when i try accessing the transcation with exception id: date:time-stamp_XXXXX. The strange thing is only I am having this problem.

  • K1 - how to put the fake leather pannel back on?

    One of my kids pealed off the back pannel cover and I can't figure out how to put it back on.  Any suggestions? Solved! Go to Solution.

  • Why are the volume keys greed out and are inoperable?

    When I am listening to an audio book on my MacBook Pro. All the volume keys are affected. Any suggestions?

  • How i can teache oracle HTML DB ?

    Hi all . . . . i would like to teach oracle HTML DB but i don't know from where i should start ? can any one help me as soon as possible. Regards;