Drvice Manager /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.Device cannot start Code 10

Product Name and Number:
HP Pavilion Dv9700
s/n [Personal Information Removed]
p/n FE395UA#ABA
Operating System:
Windows Vista 64bit
Current Issue:
When I open my Device Manager there is an /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.
When I open it's properties there is a message under the Device Status stating:
"This device cannot start. (Code 10)"
It gives me the option to "Search for solutions" which has proven unsuccessful.
Also, I have the latest driver installed.
This question was solved.
View Solution.

Hi,
Right click the device itself and select Uninstall. When this has completed, restart the notebook and let Windows re-discover the device and then check in Device Manager again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

NVIDIA NFORCE 10/100 Mbps Ethernet Upgrade Drivers

I am doing a Clean Install for upgrade with Win 7 Pro 64-bit OEM. I ran the Win 7 Upgrade Advisor and need advice on these items, on what I need to do for upgrade:
NVIDIA NFORCE 10/100 Mbps ethernet
NVIDIA GeForce GT630
NVIDIA High Definition Audio
NVIDIA nForce System Management Controller
Are these upgradeable & will work with Win 7 Pro 64bit?
This question was solved.
View Solution.

Hi,
You should be able to find the Windows 7 drivers here. Download the drivers to external media before doing the upgrade.
Backup your PC and be sure to create the external HP recovery media.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

NVIDIA nForce 10/100 mbps Ethernet Updated driver

I am trying to upgrade from Vista to Windows 7. I ran the upgrade advisor and it said that I need to download the updated driver for the NVIDIA nForce 10/100 mbps Ethernet 32bit driver to install after the installation. Where do I download it from and wich file do I download.

Hi Marilyn, First things first. Before you upgrade to Windows 7, be sure that you update the BIOS to the latest level. All too often I have people update the operating system only to find out later that the BIOS is causing issues and the HP posted BIOS update will not run with the existing operating system. You need a NVIDIA nFORCE chipset driver and I will post a link to that for you in just a moment. However, don't upgrade your PC until you donwnload the drivers and copy them to external media. This is one of the drivers needed. It's one of the latest nFORCE drivers.

Intel Management Engine Interface, Device status: This device cannot start (Code 10).

hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID   Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled.

Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

In device manager it says code 10 - this device cannot start (read message)

In device manager next to the icon for pioneer DVD-RW DVR K17A Device it has a yellow ! triangle and when i click on it, it says this device cannot start code 10. I got the laptop in June and hadnt noticed the problem til now. When i followed instructions to possbily install updated drivers/software i did so but was told i am up to date.
Thanks

Hi,
I had this exact problem yesterday. I suspect you're running Vista right? The other guy made a good point about saying what machine you've got and what OS you run, so I offer this advice with the disclaimer that I can't be 100 per cent sure it's your problem. However, I've had the exact same problem (referencing the "code 10") recently on my laptop which runs Vista. I called up support and they said there's a bunch of software, especially for things like MP3 players and digital cameras, which is compatible with vista +but+ causes the DVD / CD drive to stop working. He directed me to a page that talks you through a registry patch, which both he and the page itself advises is a little risky. That said, I did the patch and now the DVD / CD drive works. Or that is, it actually reads the DVD before citing some other reason why it can't be played (some worthless advice about reducing screen resolution and colour quality - haven't got any ideas about that have you?).
Here is the address of the page with the registry patch:
support.microsoft.com/kb/929461
Again, I'm not a techie, I'm not at all expert about dealing with computer probs and since I don't know what OS you're running and on what machine I can't be sure this applies to you. But it seems like it does.

I cannot find an update for NVIDIA nForce 10/100 Ethernet Driver Version

I am upgrading from Windows Vista to Windows 7 and the Upgrade Advisor states that NVIDIA nForce 10/100 Ethernet needs the latest driver.The current driver is 67.8.9.0
I cannot find the uodate on the NVIDIA site! This is the only action the Advisor mentions.
Chipset: GeForce 7100/nForce 630i
Intel Core 2 Duo
About my cpu:- http://support.hp.com/us-en/product/HP-Pavilion-a6540in-Desktop-PC/3733085/model/3750808/document/c0...
about my motherboard:- http://support.hp.com/us-en/product/HP-Pavilion-a6540in-Desktop-PC/3733085/model/3750808/document/c0...
This question was solved.
View Solution.

Hi:
Here is the 32 bit driver...
http://www.nvidia.com/download/driverResults.aspx/30521/en-us

NVIDIA nForce System Management Controller: Windows 7 driver?

I have a Fujitsu Siemens PC, Amilo Desktop Pi 3630 A, running Windows Vista Home Premium 32bit,
which I would like to update (preferably without reinstall) to Windows 7.
When I checked Fujitsu's website and also by mail contact, I only got the response
"Your system is not certified for Windows 7"!
So I ran "Microsoft Windows 7 Upgrade Advisor", which said that I can upgrade!
The only issue is that it requires an update to the driver for the
"NVIDIA nForce System Management Controller" [current version is 5.1.2600.158],
but Microsoft directs me to THIS site.
Here I search for a suitable driver for my motherboard, which according the tech spec's is
MB MS-7504PV (or MS-7504VP-PV) with chipset NVIDIA nForce 630i,
but no luck there. The MSI Live Update Online plug-in does not find anything on my Mainboard.
Over at NVIDIA's site I can find a driver for nForce 630i but only paired with GeForce 7xxx,
and I don't think I need a complete motherboard driver package.
Where can I find the correct driver?
Or do I dare try a Windows 7 update anyway?
What can go wrong?
PC: Fujitsu Siemens Amilo Desktop Pi 3630 A
CPU: Intel Core 2 Quad Q8200 2.33GHz
M-board: Fujitsu Siemens / MSI MB MS-7504PV, muATX, v1.1, Socket 775
Chipset: NVIDIA nForce 630i MCP73PV
BIOS: AMI v3.0S
Video: NVIDIA GeForce 9600 GT
LAN: nForce Realtek RTL8211
OS: Windows Vista Home Premium 32bit

You do not have an MSI Retail Product but a mainboard produced exclusively for the OEM Market. Neither MSI nor this forum provides end-user support for OEM products. That is also why MSI Live Update does not find anything for this particular platform (OEM). You need to contact Fujitsu Siemens for assistance (and this include BIOS Updates and drivers).
__TOPIC LOCKED__

NVIDIA nForce MCP Networking Adapter #2

Hello,
i got a funny little cosmetical detail i need help with.
I removed all nforce drivers and reinstalled them. Then i got 2 valid NIC's:
- 3com 3c905b #2 and
- NVIDIA nForce MCP Networking Adapter #2
I got numbered network cards.
I learned how to remove this. (usually) You just have to set "SET DEVMGR_SHOW_NONPRESENT_DEVICES=1" then you are able to list all devices in device manager. Just delete ALL NIC's and reboot. Now you got unnumbered NIC'S.
I was able to do so in almost all machines i had to work with... Until now.. the Nforce MCP device refuses to accept my treatment. I am not able to remove the numbering scheme. It is just a cometical issue, but if anyone got a solution, i'd be glad to hear it..
Thanks,
Andy

Andy,
I am guessing you are using WinXP. I have seen the same problem. If you move the Nic from one PCI Slot to another it will do the same thing too.
The solution I have found was doing another install of WinXP in the same Directory without formatting, so you only lose the data in the /windows directory.
Not what you want to hear I know.
Richard

Nvidia nForce Network nic (nge driver) not recoginzed

I have a Transtec Senyo Machine on which I installed Solaris 10 6/06. It does not recognize the Network.
It has a NVIDIA� Quadro� NVS 210 chip set with NVIDIA� nForce� 430B NIC. The nge module gets not loaded, upon boot, and I have of course nod /dev/nge
Any idea on how to track this down?
Regards
Fritz

I installed the third-party ngo driver providec by Masayuki Murayama of Japan
http://homepage2.nifty.com/mrym3/taiyodo/eng/
Download file http://homepage2.nifty.com/mrym3/taiyodo/nfo-2.6.3.tar.gz, and carefully follow directions in file README.txt.
The instuctions are terse for those new to Solaris, so here's a (unsupported) script to help.
First create file /etc/hostname.nfo0 or (if using NWAM in OpenSolaris) add line "ngo0 dhcp" to /etc/nwam/llp or line "ngo0 192.168.0.2" (where you replace 192.168.0.2 with your IP address).
KARCH=`isainfo -n` # amd64 or i386
rm -f obj Makefile
ln -sf Makefile.${KARCH}_gcc Makefile
ln -sf ${KARCH} obj
make install
./adddrv.sh
ifconfig nfo0 plumb
ifconfig nfo0
To find out if your network card is supported, get the PCI id from prtconf -pv
For example, my card is pci10de,ab0 (nVidia MP 79 Ethernet 10/100/1000).
Here's the ngo network driver supported nVidia cards:
MCP pci10de,1c3
MCP-R pci10de,66
nForce 3 150 pci10de,d6
nforce 2 Ultra pci10de,86 pci10de,8c
nForce 3 250Gb pci10de,e6 pci10de,df
CK804 pci10de,56 pci10de,57
MCP04 pci10de,37 pci10de,38
MCP51 pci10de,268 pci10de,269
MCP55 pci10de,372 pci10de,373
MCP61 pci10de,3e5 pci10de,3e6 pci10de,3ee pci10de,3ef
MCP65 pci10de,450 pci10de,451 pci10de,452 pci10de,453
MCP67 pci10de,54c pci10de,54d pci10de,54e pci10de,54f
MCP73 pci10de,7dc pci10de,7dd pci10de,7de pci10de,7df
MCP77 pci10de,760 pci10de,761 pci10de,762 pci10de,763
MCP79 pci10de,ab0 pci10de,ab1 pci10de,ab2 pci10de,ab3
P.S., I believe the Sun-supported driver is nge, but it doesn't recognize my card--maybe it's just older cards that it recognizes.

NVIDIA nForce Networking Controller problem

Hi, I am a new user of Solaris and Linux and I am having a problem with my internet connection under solaris.... i was reading other messages in the forum and apparently solaris doesn't detect my network adapter because when i run ifconfig -a it only shows lo0....
I went to nvidia.com but the drivers on their website are only for the graphics card... where can i get the requiered drivers (and how do i install them under solaris) for my internet connection to work???
i have a NVIDIA nForce Networking Controller and connect to the internet using road runner trough a router...
thanks...
Javisam376

Hi, I am a new user of Solaris and Linux and and I am having a problem with my internet connection under solaris...<snip>
Javisam376
Hi,
Same problem here Javisam376, but I am on an AMD x64 platform, and wondered if that might be the reason why the Solaris Express Developer Edition was unable to see the NVIDIA nForce Networking Controller, so I wonder which platform you're on (32 or 64-bits?) A general Google search for "Solaris NVIDIA nForce Networking problem" gave a fair number of hits, so the problem, seems well known, but no solutions were suggested by anybody, as far as I could see(!?)
But it seems the Linux community has the same problem, since I found this posting on LinuxQuestions.org (http://www.linuxquestions.org/questions/showthread.php?t=471094):
"I just finished installing Red Hat 9 on my machine, which is running off of an AMD/NVIDIA nForce2 chipset mobo that has integrated ethernet. I was trying to set up my network connection, but was unable to locate the nvida ethernet controller in the Network app/Network Configuration Wizard. So I went on to nvidia's site and downloaded the x86 linux driver (using my other machine) and used a cd to pop it into the other comp... Saved it to the desktop,
then terminaled: sh NFORCE-Linux-x86-1.0-0310-pkg1.run.
It took me through a setup screen where I 'installed a audio and ethernet driver'. I checked the Network wiz again, still no entry for it. So I randomly clicked the hardware browser, and IT lists the 'nForce2 Ethernet Controller' under network devices, but I can't configure it from this screen. Anyway, I would seriously appreciate any help with this. I need to get internet access on this machine quick, so this is drivin' me crazy."
Message was edited by:
troruud

K8N NEO PLATINUM Nvidia nforce 3 250 GB Chipset rebooting - hanging !@$%@#$@

Hi folks,
I am working on the K8N NEO platinum motherboard based on the Nvidia nforce 3 250 GB Chipset.
A couple of days ago I lost my internet connection (broadband). After a couple of minutes it ok again. But suddenly the computer frooze.
After rebooting (button on case) I found out that lots of things couldn't be closed anymore once they were opened. I needed to use CTRL-ALT-DEL to go the the active Tasks. But then that started to freeze too so I decided to wipe everything of the system.
I repartioned and reformated the computer with the win XP PRO CD and reinstalled the OS. I saw immediatly that the system was slower then before and that it did not found the internet connection anymore. I checked the LAN connection and there it sayed that the LAN card was working well but that no cables were connected. This was not true because I dubbel checked them twice. I even replace the cable. It was not my Internet provider neighter because the computer is in a local network and others had no problem to access the internet. So I decided to reinstall and reinstall it again. I reinstalled the system (partioning, formatting) it 4 times. The last time suddenly it found my connection back. Then I installed all updates of windows and I used my live update from MSI to update my components.
I am using live update 3 and updated the BIOS and all other parts who needed to be updated. This was done without the presence of a AV and so on. Everything went well and no errors occured. I received everytime a message with success.
Today my computer suddenly hanged itself again. This already 3 times. Nothing is possible anymore except the boot button on the case.
I also encountered 3 times the while surfing the computer suddenly reboots itself without any warning or message.
What the hell is going wrong here ???
Can aynone give me a clue please ?
Is the motherboard dying ?
MSI live bios Version 3.7.000
MS-7030(K8N Neo Series / K8N Neo platinum)
BIOS version 1.7 (latest version)
Award bios release
2005/05/10

Charly.P
Russ_xp was asking about the Max amps on your power supply should be on label like this:-
Need yours - 3.3v= ??A.5v=??A,12v=??A
luck

Compiled Driver for Nvidia Nforce

Hello,
Does anyone know where we can find a compiled Linux driver for the Nvidia
Nforce ethernet controller. We are trying to image new computers. We
have downloaded the drivers from the Nvidia website, but are unable to
extract/install the files from the file. Is it possible to compile the
driver/file from a computer running Windows?
Any help would be appreciated
Thanks
Pat

Pjsuko,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

MAINBOARD DRIVERS: NVIDIA nForce VGA Driver

i was checking live update 2 and this result came up under mainboard drivers. NVIDIA nForce VGA Driver
NVIDIA nForce VGA Driver
My Current Ver. 4114 Online Ver. 4243
Update (14.52MB )
is it advisable to go to this driver or just stick to the one i have?

it works fine, but didnt really notice in any differences.
the score in 3dmark just went down like 10 pts or so

Nvidia Nforce lan error, can't connect :(

Yep, that problem, when i try to connect using this lan.. automaticaly NOTHING HAPPENS, the light of my mobo (well.. not the mobo... the card maybe.. in the back-side.. still in "green"... but when i use the another lan (Marvell yukon..) everything goes fine, the light is green-orange like a router, but when i use bittorrent this lan wakes up my system.. (!).. and i can't remove the option to this!!!-- (where's the wake-on-lan option?)) but i saw that the nvidia nforce has an option to disable this, but the other lan no!!!!!
Please, someone could give me a hand with this FRUSTRATING PROBLEM ...... the mother has warranty yet
Thanks in advance-

This is more of the same, from https://forum-en.msi.com/index.php?topic=84357.0
Quote from: subroutine on 03-August-05, 15:58:51
Look at this thread.
https://forum-en.msi.com/index.php?topic=84339.80
This is how I got my mac address back........
AWFL833D.EXE W7025NMS.xxx /py /sn /cd /cc /cp /nvmac:xxxxxxxxxxxx /wb /f /e
Note that there is a space before each /
If you don't want to flash with a floppy, you can use winflash (it's easier and I think safer) and you just have to follow Syar's directions for WINFLASH carefully here:
https://forum-en.msi.com/index.php?topic=86257.0
The above link to Syar's post describes both methods (dos/floppy and WiNFLASH). I prefer winflash. Take your time, read the instructions from Syar carefully, and do it when you feel comfortable that you understand what to do. The nice thing about winflash is that you can quit in the middle if you get scared or there is some problem by just exiting the program and returning to windows.
Edit - just remember to use a bios that's for your computer (neo4-#7125) not mine (neo2-#7025).

NVIDIA nForce 550 MCP and 4-4-4-15 memory

Hello, I just bought this new mother board:
NVIDIA® nForce 550 MCP
The memory I have is:
OCZ Platinum Revision 2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
* DDR2 800 (PC2 6400)
* Timing 4-4-4-15
* Cas Latency 4
The system is stable using memory timings as AUTO, Sis viewer shows the memory settngs as 5-5-5-12 (Cas Latency 5)
In the BIOS If I set the CAS/tRCD/tRPD/tRAS to 4-4-4-15 then Windows crashes when I hit login screen
In the BIOS if I set only the CAS to '4' leaving all else as AUTO, Windows still behaves the same, crashes on login screen
Does this board support this memory?
If so what are the proper memory settings that I should be using to make the system stable for boot?
Bob

You could also check out what OCZ state about your RAM settings on there site. It would help if we had more details
Moan Guide
Forum Rules
How to use forum software features < sig
https://forum-en.msi.com/index.php?topic=84015.msg598902#msg598902 <> A64 tweaker

Drvice Manager /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.Device cannot start Code 10

Similar Messages

Maybe you are looking for