DS 5.2 does not startup automatically

I installed version 5.2 of the directory server and at first it was starting automatically at startup. However, it is not starting automatically anymore and I must start it manually. The /var/svc/log/milestone-multi-user:default.log is showing the following:
Executing legacy init script "/etc/rc2.d/S72directory".
There is an ns-slapd process already running: 378
However, there is not an ns-slapd process running at all. Here is what I did:
-Installed 5.2 from pkg
-ran `directoryserver configure`
-ran `ldapclient init`
-stopped the directory server with `directoryserver stop`
-ran `directoryserver ldif2db` command
-started directoryserver
-rebooted
Has anyone seen this problem before? I'm puzzled.

It is probably the start-slapd script that believes there is daemon running.
You may want to check in the instance for a pid file (in the logs directory).
If there is one while the server is not running but there is a process with that exact PID, then the script thinks the server is already running.
Just remove the PID file and everything will start as before.
Regards,
Ludovic.

Similar Messages

  • CRS process does not startup automatically when the system is rebooted

    Hi. all.
    SOME TIMES(not always), CRS process ( exactly OracleCRService on
    windows2003) does not startup automatically when the windows2003 is
    rebooted.
    O/S is windows2003 server.
    DB is 10.2.0.2.0 RAC database that has 2 nodes.
    I am testing a RAC database configuration, and thus rebooting one node
    intentionally by turn.
    I have tested about 20 times, and 17 times is OK. All required process is up
    and all instance is up.
    However, 3 times, OracleCRService services does not start, and concequently
    database instance does not start automatically.
    Here is the log of "crsd.log" file on the active node.
    2007-05-31 17:43:13.281: [ CRSEVT][1720]32Processing RecoveryDone
    2007-05-31 17:46:51.968: [ CRSRES][3876]32StopResource: setting CLI values
    2007-05-31 17:46:52.437: [ OCRMAS][2368]th_rcfg_con: pudata retval [12]. Member [2] might have gone down
    2007-05-31 17:46:52.437: [ OCRMAS][2368]proath_master: Node [2] came up/down 1/0 [1]. Problem retrieving pubdata. Should get down reconfig soon
    2007-05-31 17:48:26.890: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.000: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.109: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.218: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.328: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.437: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.546: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.656: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
    2007-05-31 17:48:27.750: [ COMMCRS][2668]clsc_send_msg: (028BA8A0) NS err (12571, 12560), transport (533, 57, 0)
    2007-05-31 17:48:27.750: [ CRSCOMM][2852]32CLSC connect failed tonmsp109ret = 9
    2007-05-31 17:48:27.859: [ CRSEVT][2852]32invokepeer ret 200
    2007-05-31 17:48:27.859: [ CRSRES][2852]32Remote start never sent to nmsp109: X_E2E_NotSent : Failed to connect to node: nmsp109
    (File: caa_CmdRTI.cpp, line: 492
    2007-05-31 17:48:27.859: [ CRSRES][2852][ALERT]32Remote start for `ora.nmsp109.gsd` failed on member `nmsp109`
    Is there anyone who can help me?
    Thanks in advance.
    Best Regards.
    Message was edited by:
    user507290

    oops- wrong forum!
    Please try the RAC forum.

  • Database does not  startup automatically

    Oracle8i/Windows 2000 server
    we have three database ,all are 9am to 6pm database
    running on ARCHIVELOGMODE.
    Few days back due to disk crash,
    we have recovered our database using coldback up.
    since we did not copy archive logs to different disk,
    we lost some data.
    disk was under warranty ,it was replaced.
    then the database did not startup automatically.
    okay the problem was,during booting(since 9am to 6pm database), we were daily logging in svrmgrl and startup the database manually.
    now we have automated the above(startup) script in
    windows scheduled task.
    what to do to solve this problem.

    Hi
    c:\document and settings\admin>ORADIM -EDIT -SID <SID> -startmode auto -pfile D:\oradata\SID\initsid.ora
    This will add few entries to the regedit
    Go to regedit
    HKEY_LOCALMACHINE\software\oracle
    ORA_SID_PFILE=D:\oradata\SID\initsid.ora
    ORA_SID_AUTOSTART=TRUE
    check these values

  • My database does not start automatically

    i am using windows 2000 server and oracle 9.0.1, my database does not start automatically when i am booting the system.
    in regedit autostart is there, my service is getting started automatically and i used startmode auto in my oradim command but still i have to manually log in to start the database, PLS help!!!
    another issue is that i want to startup/shutdown the database using a user other than sysdba, pls tell which permission shud i grant as dba, connect, resource permissions are not doing the required job

    spfile concept is introduced from Oracle 9i. You can call it system parameter file. Benefits of having spfile concept is that what ever changes u make to system through commands
    alter system set ??? = ????
    get automatically saved in the spfile???.ora which is managed by Oracle.
    Main idea behind that as thought by Oracle is that previously u needed to change that parameter in init.ora file then start the database again after shutdown. Now u are doing everything online. spfile???.ora takes priority in the new Oracle concept.
    If u delete spfile???.ora file, then it needs some specific init.ora which need to told to Oracle which can be through command like
    startup pfile='complete patah .............'
    Bansal

  • Panel does not start automatically in Gnome 2.24.3

    Since Gnome 2.24.3, the Gnome Panel does not start automatically.
    I had to manualy add it to the startup group via "Sessions" in order to force it to start when login finishes.
    Does anybody has the same behavior?
    Should I report it as a bug?

    That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
    I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

  • Cluster resource does not start automatically

    Hello,
    I have a strange issue. last saterday i replaced the motherboards of three HP DL380G6 servers, there is an HW issue with the production date of this hardware.
    After change of the HW, the cluster resources does not start automatically, when booting the servers. The resources come in state 'offline'(except the master IP resource). When start manually, the cluster resources works fine. I checked the eDirectory , and changed also the startup parameter of the cluster (autostart-manually-autostart) but with no results.
    When i create a new (simple) CL-resource, i have the same issue with this resource. Only the master ip CL-resource starts automatically??
    Does anyone have an answer for this problem....
    Thanks in advanced
    3-node SLES9sp3 SLES/OES1 cluster (i know its old...)
    - iSCSI connection to an SLES11-SAN

    Originally Posted by changju
    The state is stored in eDir, so your problem is most likely caused by an eDir issue.
    Please check the attribute "NCS:CRM Failover Mode" of the resource object in eDir. If its value is an odd number, it means the resource will load automatically. If it's not, add 1 to the number and save the new value.
    Then, you need to check file "/var/opt/novell/ncs/resources.xml". Find the section for the resource, and check "nCSCRMFailoverMode" to make sure it matches what you have in eDir. If not, please run command "/opt/novell/ncs/bin/ncs-configd.py -init" to try to update it.
    If the problem persists after all the above, please contact NTS. We will have it resolved.
    Best regards,
    Changju

  • Itunes does not open automatically when I plug in iphone?

    ITunes does not open automatically when I put my device via the USB cord into my computer.  Even though I checked that box in I tunes

    1. open up applications, and right click the itunes icon.
    2. select 'show package contents'
    3. open the contents folder
    4. open the resources folder
    5. scroll down until you find the ItunesHelper icon.
    6. Now open up your system preferences.
    7. select accounts
    8. select login items
    9. now drag the ItunesHelper icon into the login items screen
    10. This will now put the ituneshelper app into the startup items.
    Regards,
    Colin R.

  • From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    Welcome to the Apple Community.
    What exactly do you mean by 'it doesn't save'.
    Does this mean it doesn't save at all, doesn't save to the iCloud folder or doesn't sync with other the devices or iCloud.com.

  • Tomcat5 still does not start automatically

    Hello,
    Novell-tomcat5 still does not start automatically at boot although it is set to do so.
    This is from beginning of the oes2/SBE2.5 installation (without simba).
    It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches.
    After booting at terminal console:
    /etc/init.d/novell-tomcat5 status shows unused
    /etc/init.d/novell-tomcat5 start starts tomcat5 without errors
    In my boot.msg I found the following error:
    ____START______
    <notice>'novell-nss start' exits with status 0
    <notice>novell-tomcat5 start
    Starting Tomcat (/var/opt/novell/tomcat5/)<notice>checkproc: /sbin/klogd 4842
    <notice>checkproc: /sbin/syslog-ng 4839
    <notice>checkproc: /sbin/klogd 4842
    <notice>checkproc: /sbin/syslog-ng 4839
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /sbin/portmap 6200
    <notice>checkproc: /sbin/portmap 6200
    <notice>checkproc: /usr/sbin/sshd 6915
    <notice>checkproc: /usr/sbin/sshd 6915
    <notice>checkproc: /usr/sbin/nmbd 5530
    <notice>checkproc: /usr/sbin/nmbd 5530
    <notice>checkproc: /usr/sbin/smbd 6900
    <notice>checkproc: /usr/sbin/smbd 6900
    <notice>checkproc: /usr/sbin/namcd 8495
    <notice>checkproc: /usr/sbin/namcd 8495
    <notice>checkproc: /usr/sbin/ntpd 7000
    <notice>checkproc: /usr/sbin/ntpd 7000
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /sbin/klogd 4842
    <notice>checkproc: /sbin/syslog-ng 4839
    <notice>checkproc: /sbin/klogd 4842
    <notice>checkproc: /sbin/syslog-ng 4839
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /sbin/portmap 6200
    <notice>checkproc: /sbin/portmap 6200
    <notice>checkproc: /usr/sbin/sshd 6915
    <notice>checkproc: /usr/sbin/sshd 6915
    <notice>checkproc: /usr/sbin/nmbd 5530
    <notice>checkproc: /usr/sbin/nmbd 5530
    <notice>checkproc: /usr/sbin/smbd 6900
    <notice>checkproc: /usr/sbin/smbd 6900
    <notice>checkproc: /usr/sbin/namcd 8495
    <notice>checkproc: /usr/sbin/namcd 8495
    <notice>checkproc: /usr/sbin/ntpd 7000
    <notice>checkproc: /usr/sbin/ntpd 7000
    <notice>checkproc: /usr/sbin/slpd 7030
    <notice>checkproc: /usr/sbin/slpd 7030
    failed
    <notice>'novell-tomcat5 start' exits with status 7
    <notice>novell-xregd start
    Starting novell-xregd...done
    <notice>'novell-xregd start' exits with status 0 ....
    _______END______________
    Of course it es even a cosmetic problem I don't want to start tomcat manually everytime when booting up.
    Has anybody an idea what could be wrong?
    Yours sincerely
    OliverN

    Originally Posted by revilo
    Hello,
    Novell-tomcat5 still does not start automatically at boot although it is set to do so.
    This is from beginning of the oes2/SBE2.5 installation (without simba).
    It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches.
    After booting at terminal console:
    /etc/init.d/novell-tomcat5 status shows unused
    /etc/init.d/novell-tomcat5 start starts tomcat5 without errors
    Of course it es even a cosmetic problem I don't want to start tomcat manually everytime when booting up.
    Has anybody an idea what could be wrong?
    Yours sincerely
    OliverN
    Hi Oliver,
    If you are manually installing the component products then this is no longer a "NOWS SBE" installation. Any issues you encounter are related solely to the component products. OES Linux Installation questions should be directed to: OES-L: Install
    In the mean time, to see if it is configured to start automatically use "chkconfig". For instructions:
    Code:
    man chkconfig
    Is it configured to start automatically?
    Code:
    server:~ # chkconfig --list | grep novell-tomcat5
    novell-tomcat5 0:off 1:off 2:off 3:on 4:off 5:on 6:off
    The response from the above command shows that novell-tomcat5 should start automatically for runlevels 3 and 5.
    If it is not set to start automatically on your server, you can make it start by:
    Code:
    chkconfig novell-tomcat5 on
    I am by no means a Linux expert. If this doesn't resolve your issue, I suggest you post in the appropriate forum where you will find knowledgeable people willing to help.

  • MII UDS does not start automatically on server reset

    Hi,
    MII UDS does not start automatically on server reset, although it was set as automatically start.
    What could be the reason of this problem?
    Thanks.

    Hi,
    Is the runtime mode is set to service?
    Have you referred this document?
    [Programatically Starting and Stopping an SAP xMII UDS Executable Instance|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0f460c3-7f92-2910-02af-b608f92977c3]
    Regards,
    Musarrat
    Edited by: Musarrat Husain on Jul 6, 2011 8:27 PM

  • EyeTV: Mac does not start automatically

    Mac does not start automatically for EyeTV recordings. I reinstalled EyeTV but it did not help.
    Any help appreciated.
    iMac i5, 2,7Ghz, OS X 10.7.4
    Kind reagards,
    Torsten

    I have to same problem: Bought Elgato Sat 3 years ago. Now I decided to install it in the living room and bought a new i5 Mac mini. EyeTV works fine but does not wake up Mountain Lion 10.8.2 sometimes.
    When I program wake up events manually via System Preferences or pmset command in the terminal, all works fine and my Mac wakes up. I tried everything, from clean reinstall to debugging AutoWake.plist and such.
    Annoying!

  • The CSSD does not start automatically on Non-RAC - AIX 5L

    Hi all,
    Database: Oracle 10.2.0.4
    O.S AIX 5.3 TL 10
    I am facing a problem with the CSSD Non-RAC/Clusterware.
    When we restarted the server the service CSSD does not start automatically and there is no relevant messages in the log files of CSSD.
    Running the "localconfig reset $ORACLE_HOME", execute successfully but does not start the CSSD.
    Running "/etc/init.cssd start" - does not work, nothing happens when we run it
    I manually ran "/etc/ init.cssd run" and the service CSSD (ossd.bin) was started without errors.
    No errors on errpt from AIX.
    I've opened a SR but I am waiting for response from Oracle.

    Hi,
    I believe this problem is not with Oracle, but in AIX.It may be that one process that is starting on boot is holding the other process. You need to identify what is process/application.
    Check the process on inittab that are already active and which are inactive they should be active.
    One clue: Is very common process that is initiated in wait mode hold the boot server.
    wait
    When the init command enters the run level that matches the entry's run level,
    start the process and wait for its termination.
    All subsequent reads of the /etc/inittab file while the init
    command is in the same run level will cause the init command to ignore this entry.http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.files/doc/aixfiles/inittab.htm
    Regards,
    Levi Pereira

  • Oracle service, Listener and http server does not start automatically

    Hello,
    I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
    Thanks, Khawar.

    Hi Rajesh,
    Thanks for reply, I will check this link and will be back if facing problem.
    Regards, Khawar.

  • ITunes does not start automatically when I plug in my iPHONE.  When I start it manually it does not recognize my phone although the phone is visible in My Computer.

    Itunes does not start automatically when I plug in my iPhone.  When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc.  Many albums have no art work that use to.  iTunes completely unresponsive to the mouse.

    Hi billm1013,
    I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

Maybe you are looking for