DS1809 and LP2951 multisim models

Hi,
I am looking for the models of DS1809(digital potentiometer) and LP2951(voltage regulator) for multisim and pspice. Could you please help? It is very urgent.

Sorry for the late reply. Those two models don't seem to exist in the Multisim master database. What you can do is to create your own customized components that meet you needs. Unfortunately we are not responsible for taking care of that part. To do so, please check the thread below:
https://decibel.ni.com/content/groups/circuit/blog/2011/04/06/component-creation-101
Hope this helps.
Derek Z.
National Instruments

Similar Messages

Multisim model for the semicron AN-8005 module

Does anyone have a multisim model for the semicron AN-8005 module, this is an IBGT Power Electronics Teaching System Principle for sizing power converters. Or a model that has the same functional in- and outputs? I am using the hardware in a didactic setup for my thesis and would like to test my LAbview code through a simulation in Multisim.
Attachments:
AN-8005-Teaching-System.pdf ‏2020 KB

Hi GeoffreyDS,
I have searched to see if I could find a model for the product you mentioned, but have been unable to do so. Have you tried contacting the manufacturer?
Regards,
Al C
National Instruments,
Application Engineer

Open and close multisim contact with LabVIEW

Can I open and close multisim contact with labview and read the receptor estatus (p.e. lamp)?
Thanks.
Attachments:
Dibujo.JPG ‏13 KB

Hi Guddan,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
If this needs to be a synchronous call, then you will need to optimize the query to its best.
Regards,
Chen

Labview runs CANBus and DNP3 software model at the same time

I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
I proposed two possible ways to conduct communication, bt not sure if it is possible.
1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
The diagram of the communication system is shown in the attachments.
Attachments:
Commnucation system diagram.pdf ‏118 KB

To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
¿Do you see a trend developing here?

Traditional DAQ and SCXI 1530 model name

Hi all,
I am using Labview 6.1 and Traditional DAQ 7.1. I am working on one system with one DAQ card (PCI 6052E) and several SCXI cards(1520, 1530). All the SCXI cards are installed correctly because MAX can detect them all.
I want to make a program with Traditional DAQ which can detect all the SCXI cards and show their model names on the front panel.
I found in Tradtional DAQ, there is one VI called "Get SCXI Information" which returns the model types of SCXI cards, something like, 50, 51....
I found in the help file of "Get SCXI Information" VI there is some kind of the configuration file saying 51 stands for SCXI 1520. What does 50 stand for? Where can I find the complete configuration file or somehow can I change it? Like make 51 stands for something else...
Any ideas are highly appreciated.... Thank you all!
Solved!
Go to Solution.

This is a duplicate of the last post in this thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=53087
Brad Keryan
NI R&D

What are the differences between iPod 2nd and 3rd Generation models?

Hi:
I have a couple questions about the differences between some of the iPod Touch models:
1) What is the difference between the *2nd Gen 8GB iPod touch* and the *3rd Gen 8GB iPod touch?*
2) What are the differences among the *3rd Gen iPod Touch 8GB* model and the *32 GB and 64 GB models* (other than the memory differences)?
Thanks!

rebello95 wrote:
1) What is the difference between the *2nd Gen 8GB iPod touch* and the *3rd Gen 8GB iPod touch?*
none, really.
2) What are the differences among the *3rd Gen iPod Touch 8GB* model and the *32 GB and 64 GB models* (other than the memory differences)?
the 32 & 64 GB models have advanced hardware components. 32GB and 64GB Touches gain 3GS specs - roughly 2x faster, with more advanced 3D graphics for games that capitalize on OpenGL 2.0 - and features like Voice Control.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Hi my macbook pro are stolen that is 13.3" inch and mid 2010 model.

my macbook pro are stolen and my mac model is mid 2010. but i have no serial number and box. but my laptop lcd are broke i am change that lcd.
In lcd (13383nh45143-4n2a), (lp133wx3-tla4) and lcd factory id is lgdnj. it is possible send me the serial nuber of laptop. or tell me how i am find my laptop.

You need to contact Apple support,http://www.apple.com/contact/

Designing database structure and SSAS Tabular Model cubes

Hi.
I need to design a database and SSAS tabular models for my clients but I am confused which way I should implement it.
Data for all the clients is stored into a single database with unique ClientId for each client, such 15 tables I have under a single database which stores information about all the clients.
Task is to create a SharePoint Site collection for each client which will display Power View Dashboard by taking data from above database.
Till now I have created a SSAS Tabular Model for each client, XClientModel, YModelClient using BIDS and using SQL Queries to extract data for respective clients(select * from Table1 where ClientID="X") and using Power View external connection
to this model, have created Dashboard and other SharePoint information.
I am not sure if creating different Model is suitable or I should first separate data for each client into separate database and then create Model based on respective client's database.
Can Some one highlight pros and cons on using
SINGLE database with Multiple Tabular Model (One with Many) AND Separate Database with it's Model(One to One) ?
This is understandable but just putting it here........Imp Note: Data for X client shouldn't be visible to Y client on SharePoint.
Please let me know if further information is required.

Hi Sgms,
In your description, you said that all the clients information were stored in a single database, now you want to know which method is better, single database with Multiple Tabular Model or separate database with it's Model?
In your scenario, all the information were stored in a single database, why do you want to separate it or create multiple tabular model? If you create multiple model, then you need change the data source to create PowerView dashboard for each client. As
per my understanding, you just need create one tabular to load all the information. And then use this model to create PowerView dashboard. Using filter to display the information for each client.
Reference:
Lesson 1: Create a New Tabular Model Project
Filtering, Highlighting, and Slicers in Power View
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Just looking steps for Lenovo and HP each model example what is link to download the driver files

DELL offers cab file and lenovo,HP what type of driver files just looking steps for Lenovo and HP each model example what is link to download the driver files and other settings used in task sequence or package

This should help you out:
Lenovo: http://support.lenovo.com/en/documents/ht074984
HP:
http://www.deploymentresearch.com/Research/tabid/62/EntryId/55/HP-takes-the-next-step-and-provides-ready-made-driver-packages-for-MDT-and-SCCM.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Difference between webservices model and adaptive webservices model

hi
Can any one explain me regarding Difference between webservices model and adaptive webservices model.
Thanks

Hi,
In old WS Model, ithere was no concept of logical destinations.
There if you are using a WSDL located on a server and if the location of the WSDL
changes, your application won't run. The deployed application using the WS Model will have trouble finding
the WSDL. As a result you'll have to again import the
model. Moreover old WS Model does not have re-import functionality.
But incase of AWS Model, you can desine logical destinations and even if the location of the WSDL changes, all you have to do is change the new url in the Visual Admin and not import the model again.
You can visit the following link for more details:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
Regards,
Nidhi

Difference between Adaptive RFC and Adaptive RFC2 model

Hi,
What is the difference between Adaptive RFC and Adaptive RFC2 model ?
Regards,
Sunaina Reddy T

Hi
Main difference are
1.JCo 3.0 to connect to SAP Systems
2.Improved connection management
3.Faster performance
4.Lower memory consumption
5.SystemLandscape API is no longer needed
6.Compatible to ARFC1 to allow easy migration
Check the thread for further input
1.[Whatu2019s New in Web Dynpro Java?|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8062c7d3-c86f-2b10-4894-a9a323da20b3]
Best Regards
Satish Kumar

Transportation of Mater and Transactional ETL models

Hi,
please consider the scenario,Ex: One cube " ZSD_C06 " contains 6 infoobjects. each info object having 2 data source ( like attibute and text ).
Now, My questions are
1) Is it neccesay to transport the master data ETL model first and then tranport the transactional data. ETL Model?
2) Can i keep all the data sources (attribute and text ) of these info objects in ECC into one single request?If yes please tell me the process.?
3) Is it neccessary the data sources tranportatio first and the ETL model next ?
Thanks in advance
Naresh.

Hi Naresh,
What ever the model
1. You will transport DS First and you will replicate those DS in BI Quality.
2. Then You will transport the Master Data Objects.
3. Finally you need to transport the DSO's.
1) Is it neccesay to transport the master data ETL model first and then tranport the transactional data. ETL Model?
Yes
2) Can i keep all the data sources (attribute and text ) of these info objects in ECC into one single request?If yes please tell me the process.?
You can do this.While activating the DS you assign them to one TR Request or manually open the TR request and maintain the DS list under that request.
3) Is it neccessary the data sources tranportatio first and the ETL model next ?
Yes
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 28, 2010 8:10 AM

Internal and external distribution models utilizing the SD Module and tcode

gurus,
Did anyone have an experience with internal and external distribution models utilizing the SD Module and transactions.
Please explain the model with tcodes.
Thanks in advance
Regards,
Andy

Can you pen down your requirement !

I would like to ask if Siri is only applicable after I updated my iPad to iOS 6 or what? And my iPad model is MC706ZP so is this a 3rd generation iPad? Thanks for giving a feedback to my questions!

I would like to ask if Siri is only applicable after I updated my iPad to iOS 6 or what? And my iPad model is MC706ZP so is this a 3rd generation iPad? Thanks for giving a feedback to my questions!

If you have been syncing with itunes on a computer, then should not be a problem. If you've never dones so, then you should. If you don't have a computer, then at least set up icloud on your device and perform a backup in icloud.
How to update your iOS device
http://support.apple.com/kb/HT4623
iCloud Support
http://www.apple.com/support/icloud/
How to set up iCloud on all your devices
http://www.apple.com/icloud/setup/
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766
About iOS backups
http://support.apple.com/kb/HT4946

How could i parse string and link its model with my files in eclipse project?

How could i parse string and link its model with my files in eclipse project?, as i read that we dont have to use standalone mode while working with eclipse projects.
Example of what i want to do:
I have file1.dsl in my project which contains some statements but the declaration of these statements are not in another file, i need to put them only in my code

Hi Stefan,
I have eclipse project contains 2 files, file1.dsl and file2.dsl, you can see the contents of the files below.
file1.dsl contains some statements as shown below and file2.dsl contains the declarations of the variables. (like in C++ or Java we have declarations and usage)
At this step file1.dsl and file2.dsl will be parsed successfully without any errors.
Lets imagine that we will delete this project and will create another one and the new project will contain only file1.dsl (which contains the usage)
At this step this file (file1.dsl) will contains some errors after parsing it, because we are using variables without declarations.
So what i need is to parse the content of file2.dsl directly without adding this file to the project.
I need to add the content of file2.dsl directly as a string in the code and parse it. just like that ( "int a;int b;" )
And link file1.dsl with the model generated after parsing my string
file1.dsl
a++;
b++;
file2.dsl
int a;
int b;
Thanks

DS1809 and LP2951 multisim models

Similar Messages

Maybe you are looking for