DS5.2p3 idsktune && Solaris 10 patches

When running /usr/ds/v5.2/bin/slapd/server/idsktune on a Solaris 10 3/05 SPARC server, the only WARNING I get is about patches 113886-27 and 113887-27 as shown here:
# ./idsktune
Sun Java Enterprise System platform tuning analysis version 18-OCT-2004.
Copyright 2002-2004 Sun Microsystems, Inc.
WARNING: Patch 113886-27 seen on Solaris 10 () but intended for Solaris 7 .
WARNING: Patch 113887-27 seen on Solaris 10 () but intended for Solaris 7 .Checking my jumpstart patchfile, this is not a patch we install. It is on the Solaris 10 product CD as a part of the OpenGL 1.3 package SUNWglrt.
I am not terribly worried, and everything seems to work OK, though I thought I should share, see if anyone else has run into this and if it has bit them.
TIA,
Ben

An update, the idsktune script that comes with Directory Server 5.2 Patch 4 still gives this warning. Has no one else seen this or what?
Here's the new script's output:
# /usr/ds/v5.2/bin/slapd/server/idsktune
Sun Java Enterprise System platform tuning analysis version 15-JUN-2005.
Copyright 2002-2005 Sun Microsystems, Inc.
WARNING: Patch 113886-27 seen on Solaris 10 () but intended for Solaris 7 .
WARNING: Patch 113887-27 seen on Solaris 10 () but intended for Solaris 7 .
NOTICE : Solaris patches can be obtained from http://sunsolve.sun.com or your Solaris support representative.

Similar Messages

HTTP error while downloading solaris patches using wget

Hello,
I am getting a HTTP error while downloading solaris patches using wget.
'Downloading unsigned patch 113096-03.
--2010-06-18 03:51:15-- http://sunsolve.sun.com/pdownload.pl?target=113096-03&method=h
Resolving sunsolve.sun.com (sunsolve.sun.com)... 192.18.108.40
Connecting to sunsolve.sun.com (sunsolve.sun.com)|192.18.108.40|:80... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: http://sunsolve.sun.com/pdownload.do?target=113096-03&method=h [following]
--2010-06-18 03:51:15-- http://sunsolve.sun.com/pdownload.do?target=113096-03&method=h
Reusing existing connection to sunsolve.sun.com:80.
HTTP request sent, awaiting response... 401 Unauthorized
Unknown authentication scheme.
Authorization failed.
Problem downloading 113096-03.
What am i missing here... The credentials to login to sunsolve are correct and are updated in the downloadpatch.sh script.
Please assist
Thanks
Sunny

Try download via browser url:
[http://sunsolve.sun.com/pdownload.pl?target=113096-03&method=h]
You need a valid support contract not just Sunsolve account for many patches.

Solaris Patch Manager gets status:302 behind Proxy

Hi Colleagues,
I am trying to get Solaris Patch Manager on my Solaris 8 up and running.
But if I say "smpatch analyze", the smpatch just reports a "Response code was 302" I think this means something like: "temporary moved".
I think my problem is, that the proxy doesn't follow the moved object.
Can anybody tell me where I can manualy download the detectors.jar and patchdb.zip?

Any news on this posting? I'm trying to do the same thing, as I dont want to use a caching proxy to download patches, I just want to use
a local source to perform analysis, downloads, and updates.
Cheers.

Solaris Patch 117846-20

Hi there,
Where can I download this Solaris patch?
I have found it here but am unable to download it.
http://wesunsolve.net/patch/id/117846-20
Many thanks,

Have you tried at https://support.oracle.com ? To download patches, you will need a vailid CSI
HTH
Srini

How do I find the latest Critical Sun Solaris Patches on Oracle site

Hello
How do I find the latest critical Solaris Patches available to the users. I was searching the list on Oracle's site it's hard to determine which patch is critcal or not. When I type uname -a this is what returns Generic_142909-17.
Any help you could provide would be appreciated.

Sorry, I wrote "Monthly" when I meant to write "Quarterly". Apologies for the confusion. My bad.
From - http://www.oracle.com/technetwork/topics/security/alerts-086861.html
They are released on the Tuesday closest to the 15th day of January, April, July and October. Starting 2011, the scheduled dates for the release of Critical Patch Updates will be on the Tuesday closest to the 17th day of January, April, July and October. The next four dates are:
* 19 April 2011
* 19 July 2011
* 18 October 2011
* 17 January 2012
The CPU for the Solaris Operating System is a rebranded snapshot of the Recommended OS Cluster. The rebranding involves only superficial changes to the patch cluster, with the actual patch content remaining unchanged. The patches contained in this patch cluster are considered the most important and highly recommended patches for Solaris 10. They provide the least amount of change required to address known security, data corruption and availability issues.
If there's a particular CVE Alert which you're vulnerable to or interested in, then the fix will be released within the patch that corresponds to the area of code the vulnerability affects. You can then apply that patch and it's requirements separate to the clusters. Next time you apply the cluster it will either install the latest rev of the patch or skip it if you have the latest installed already.
The Recommended Patch Cluster bundle is a much larger collection of patches and contains all the latest patches (at the time of release) which include Solaris updates, Security, and Sun Alert fixes. Note that we merged "Recommended Patch Cluster/Kernel Jumbo Patchset" and the "Sun Alert Patch Clusters" back in June 2010. See http://blogs.sun.com/patch/entry/merging_the_solaris_recommended_and for more information regarding what happened and why.
Of course there will be a large overlap between the "Recommended OS Cluster" and the "Critical Patch Updates" patchsets will be rolled in to the "Recommended OS Cluster" whenever it's cut and released.
There's a lot of information in the README files for each cluster so you may want to read those to understand the subtle differences.
Regards,
Steve

Solaris patching on solaris 10 x86

just wondering if anyone can assist. i have just installed solaris 10 x86 recommended patches on a 16 disks server. where first 2 disks are mirrored called rpool, and remaining 14 disks are raid z called spool. upon installing the patches successfully and rebooting server, i am coming up with the following error:
NOTICE: Can not read the pool label from '/pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@0,0:a /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@1,0:a'
NOTICE: spa_import_rootpool: error 5, Inc. All rights reserved.
Cannot mount root on /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@0,0:a /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@1,0:a fstype zfs
panic[cpu0]/thread=fffffffffbc28820: vfs_mountroot: cannot mount root
fffffffffbc4b190 genunix:vfs_mountroot+323 ()
fffffffffbc4b1d0 genunix:main+a9 ()
fffffffffbc4b1e0 unix:_start+95 ()
skipping system dump - no dump device configured
rebooting...
It looks like the solaris 10 os cannot find zfs filesystem and keeps on rebooting in normal solaris os mode, but when I go to safe mode and type: zfs list, I can see zfs rpool (mirrored) file system and cannot see the zfs spool (raid z) file system, any ideas on how i can fix the boot problem and get zfs spool back in the safest way possible?...

I finally figured it out. It seems that kernel patch 137138-09 was the culprit. It took me a while to test each kernel patch but I found out that if you have a mirrored volume or a virtual logical volume this will affect you. Also, after I did all this testing I finally found the sunsolve article referencing this patch. Seems you can install the patch, but you have to install 125556-01 first. Here's the article: http://sunsolve.sun.com/search/document.do?assetkey=1-66-246206-1

Are Solaris Patches ONLY available for a fee?

I have tried repeatedly to get Patch Manager for Solaris 9, which we're running on a brand new V240. The application we purchased it for is not yet certified to be binary compatible with SOL 10, so we were forced to go back to SOL9.
SunSolve makes PatchManager and PatchPro available for free download to Solaris 8 users. Update Connection is available to Solaris 10 users. Solaris 9 users seem to be in a position to pay for a service plan to get updates.
We purcased 2 Sun Servers at the same time. The x86 server is running Linux, which we have no trouble getting free updates for, particularly security updates.
I'm thinking that maybe I need to switch our Sun SPARC server to OpenSolaris to get the same kind of benefits we are used to with Linux.
Comments, suggestions, anyone?
Thanks!
John

After being told by many people in these forums that I could get the PatchManager and patches here for free, and going thru much frustration trying, I called the school's local Sun dealer.
The Sun dealer told me that since Sun released Solaris for FREE download, Sun is requiring a support contract to get updates and patches. Basically, the support contracts pay for the "FREE" O/S.
The Sun web pages kept insisting I have a support contract, so what the Sun dealer told me concurs with what I ran into on here.
Thanks for trying to help. I do appreciate it.
John

Solaris Patching/SAN Boot

I have just created an ABE on a SAN device, upgraded it and then booted from it.
Its been a long journey, and involved a SR with oracle.
I was new to it and am astonished at how hard it has been. Not hard in the sense that anything was over complicated, but the tangle mess of patch levels and gathering information on server firmware, SAN boot, HBA firmware, patches etc has been a nightmare. Not sure whether its me just new to patching solaris 10 etc, but I have literally trawled through a couple of dozen documents, countless web browsing and a few grey hairs just to achieve this.
I will hold my hand up, some of it was of our own making - I was patching a system that had not been touched in a number of years.
Anyone had a similar experience or does it get easier?!?!?

I really don't like san boot for operating system. You have too many points of failure for the basic operation.
Anyway, during installation, ensure that you access the disk using just one path (using zoning for example). After you enable and configure MPxIO, you could enable other paths.

Solaris patch update

Hi ,
I have two questions in solaris 10.
1.Is there any equivalent YUM (in linux) in solaris-10?if so , can you provide the details as to how use them to update patch?
2. equivalent of RPM ( in Linux) in solaris - 10.
Thanks

Hi,
1. No YUM alike on Solaris but you can use pca to manage patches -> http://www.par.univie.ac.at/solaris/pca/
2. pkg-config (1)- return meta information about installed libraries
pkgadd (1m)- transfer software packages to the system
pkgadm (1m)- manage packaging and patching system
pkgask (1m)- stores answers to a request script
pkgchk (1m)- check package installation accuracy
pkginfo (1)- display software package information
pkginfo (4)- package characteristics file
pkgmap (4)- package contents description file
pkgmk (1)- produce an installable package
pkgparam (1)- display package parameter values
pkgproto (1)- generate prototype file entries for input to pkgmk command
pkgrm (1m)- remove a package from the system
pkgtrans (1)- translate package format
Marco

Applying Solaris Patches that Require Single User Mode

Some OS patches require single user mode and reboot. Does the standard Solaris plugin patch management handle this? If not, could I write my own patch component and simply add "init 1; patchadd; init 6" to the execnative?
Thanks - Jay

I can't speak about the Solaris plugin, unfortunately, but a single execnative call wouldn't cover what you're trying to accomplish. There's an RFE for the core SPS system to add this capability, but I don't know that it will be added soon. Remember that when you switch runlevels, a number of start and stop scripts are invoked, shutting down and starting up a number of services. To do what you want to do, you'd have to have a start script for the RA in runlevel 1. You'd also have to have a way for the RA to execute a command on startup which isn't possible today. There'd have to be a way for the MS to deposit a command for the RA to execute, restart the RA in runlevel 1, the RA would have to read the command on startup and execute it, then restart the RA to runlevel 3 (or 6, whatever is your default or previous runlevel). It's all doable, to be sure, but not with changes to the core product.

10gR2 RDBMS required packages - Solaris patch 112760 is not installed

Hi,
Run RDA before 10gR2 installation:
Test [ FAILED ] : Patch 112760 is not installed = adequate
Trying to apply this patch:
# patchadd -d /export/home/~/patches/112760-18
Checking installed patches...
One or more patch packages included in
112760-18 are not installed on this system.
Patchadd is terminating.
From the readme file, it is trying to apply a patch for a C compiler, which you don't have on this system.
Keywords: c 5.5 security
Synopsis: C 5.5: Patch for S1S8CC C compiler
Date: Jun/22/2005
Unbundled Product: Sun ONE Studio 8 Compiler Common C
Not sure why oracle would require this patch when the system doesn't have a licensed compiler on it. Can anybody explain why this is the case?
According to Oracle, patch 112760 for Solaris 8 and Solaris 9 is required for:
PL/SQL native compilation, Pro*C/C++, Pro*FORTRAN, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK).
Unfortunately I am not sure if I should be concerned with this particular patch.
Please advice.
Thanks
Gregory Brusilovsky
Oracle DBA
[email protected]

Hi,
I have many ORA-7445 in RMAN ( CATALOG DATABASE ) with native database.
The DATABASE is also in AL32UTF8 character set.
I received the same stupid support answers.
Can you made the following command on the core.
plimit process_id
and
pmap on the core file.
For an obvous raison the stack is limitied to 32M on solaris it's part of the Oracle excutable
Check the stack process limit:
plimit 27135 | egrep '27135|stack'
27135: oracleariane (LOCAL=NO)
stack(kbytes) 32768 65536
plimit 4335 | egrep '4335|stack'
4335: /opt/oracle/product/10.2.0_64/db_1/bin/tnslsnr listener_ariane -inheri
stack(kbytes) 65536 65536
Oracle executable limite the stack size to 32M even it can grow up to 65M.
Its father listener has n't set this limit in the case 65M.
FACT THAT IS THE LIMIT:
pmap core | grep stack
FFFFFFFF7E000000 32768K rw--- [ stack ]
That is the same as the shadow process limit.
FACT THAT THE SETRLIMIT IS USED N ORACLE
nm $OH/bin/oracle | grep setrlimit
[135743] | 106048704| 0|FUNC |GLOB |0 |UNDEF |setrlimit
Stupid test case:
cat e.c
#include <stdio.h>
#include <string.h>
int fct( int nbr ) {
char buffer [ 65536 ] ;
( void ) printf ( "%08d\n" , nbr ) ;
( void ) ( memset ( ( void *) buffer , (int) 255 , sizeof ( buffer ) ) ) ;
( void ) fct ( nbr + 1 ) ;
int main ( int agrc , char * argv [] , char * arge [] )
(void ) fct ( 0 ) ;
return ( 0 ) ;
cc -o e e.c
ulimit -s 2000
./e
00000000
00000001
00000030
Segmentation Fault(coredump)
pmap core | grep stack
2000K rw--- [ stack ]
That is the point.
[email protected]
Message was edited by:
lange.francois

Ds5.1 on Solaris 8 core install and SNMP

On a Solaris 8 core installation with the Directory Server 5.1,
everything works okay, except SNMP activation from the Administration Server which sends the following error
message :
"Setup select/poll problem : Invalid argument"
SNMP master agent refuses to start.
This works very well on a Solaris 8 full install, so the question
is :
What Solaris 8 packages are required to handle SNMP properly
in this context ?
Thank you very much for your help.
JCT

when i access
http://localhost/portal
A serious error has occured in the Desktop. This may have been caused by a mis-configuration on the server.
Please report this problem to your administrator.
Return to front page

How to manually install the Solaris Patch SunOS 5.10_x86: Kernel Patch ?

Same as subject.

download the patch from sunsolve.
unzip it
patchadd <patchnumber>
reboot immediately.
The recommended procedure is to do it with the machine in single user mode.
But usually making the machine as quiescent as possible eg killing of daemons and runnin g jobs is sufficient.

How to resolve patch dependencies on Solaris 8 or 9

Hello,
I need to apply some Solaris patches but these particular patches have other patch dependencies.
Can anyone please advise in which order should I install these patches. I am aware of patchadd will install a
patch(es) but I just need to know the order of installing them?
Thank you.

This forum is for Forms questions. You should ask your question on the appropriate forum.
Regards,
Robin Zimmermann
Forms Product Management

Solaris 10 DS5.2Q4 with SSL/TLS with Replicaton

I have been working on configuring DS5.2Q4 on Solaris 10 11/06. I have been successful with Gary Tay's documentation (a few changes for new syntax and svcs). My current configuration only has one ldap server and using self signed certs.
I would now like to move to the next step of maintaining my ssl/tls but adding another master with replication.
Here are a couple of my questions.
1) How do I configure my clients to work with both replication master servers. I am a little confused since the certs in my client are assigned to only one of my masters. Do both masters need the same cert, or is there a way to allow for both certs to be loated on the client (/var/ldap).
2) Enable secure replication. I have not looked too deep into this yet, but that is my plan.
As a final note, I would like to thank Gary Tay for all of his feedback and documentation. I find that Sun often lacks step by step procedures for tasks such as this. Thanks!

I have been working on configuring DS5.2Q4 on Solaris 10 11/06. I have been successful with Gary Tay's documentation (a few changes for new syntax and svcs). My current configuration only has one ldap server and using self signed certs.
I would now like to move to the next step of maintaining my ssl/tls but adding another master with replication.
Here are a couple of my questions.
1) How do I configure my clients to work with both replication master servers. I am a little confused since the certs in my client are assigned to only one of my masters. Do both masters need the same cert, or is there a way to allow for both certs to be loated on the client (/var/ldap).
2) Enable secure replication. I have not looked too deep into this yet, but that is my plan.
As a final note, I would like to thank Gary Tay for all of his feedback and documentation. I find that Sun often lacks step by step procedures for tasks such as this. Thanks!

DS5.2p3 idsktune && Solaris 10 patches

Similar Messages

Maybe you are looking for