DSA/RG Register

Hello Experts
I have generated RG register through XL reporter.I Did a good receipt (using receipt option in Stock transaction in Inventory module)and a purchase (AP invoice)for an item of finished good.Goods receipt quantity appears in the "manufactured "column and Purchase quantity appears in the "other' column of the register But the same purcahse quantity is excluded in the closing balance.If i sell the whole quantity it will show a negative in the summary.can anybody dealing with excise Clarify?
regards
Manoj
Edited by: Manoj K Tharakan on Mar 9, 2011 6:36 PM

Hi,
we can maintain register for finished goods in SAP B One. The register for this is RG-1 which maintains daily stock account. This report is available in
Country specific contents>>Indian Legal reports.
This is available in 2007 B i am not sure about 2005 B
Hope this solves your problem.
swap

Similar Messages

Register non web application on SSO

how can i register non web application ? I have installed app server , oid and was able to sync with active directory. I need to integrate and have a single sign on for all my application . What will be the next step ?

Thanks Kiran for your prompt response. I dont have any web based application. I have some of the applications where backends are oracle and sybase. How can a provide a single sign on for the application. Once the user enters his user name or password. If he has the prvilege the use multiple apps he dont have to enter username and password for each application. I had syn with windows AD. I have oracle db on unix. I believe i have to sync with EM users for all oracle db. what about sybase ?? how can i have the single sign on . I have OID, IAS installed on a single windows server.
Yesterda when i restarted the server i got the following error. when i checked the opmnctl status
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | OC4J_SECURITY | N/A | Down
HTTP_Server | HTTP_Server | 2088 | Alive
OID | OID | N/A | Down
earlier oc4j_security and OID was alive now only http_server is alive
when i tried to start the process i get the following errors
E:\OraHome_1\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=CV2K3TESTAPP02:6200
1 of 3 processes started.
ias-instance id=iasrep.cv2k3testapp02.corp.cvpsnet.net
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/OC4J_SECURITY/default_island
Error
--> Process (pid=0)
oid dependency failed
OID
failed to start a managed process because a dependency check failed
Log:
none
ias-component/process-type/process-set:
OID/OID/OID
Error
--> Process (pid=0)
database dependency failed
iasrep
failed to start a managed process because a dependency check failed
Log:
I would appreciate if anyone could help me

DAILY EXCISE REGISTER REPORT

Dear expert
I am beginer in sap,and working on sap 2007b,
i want a report for daily excise register which formate is as
(date Op.Balance PurchaseQty jobworkQty ProductionQty Total SaleQty JobWorkQty ProductionQty Total ClosingBal)
Please help me
Regards
Anand Kumar Pandey

Hi Anand.....
Are you aware about XL reporter provided by SAP?
When you login to SAP go to Addon Manager and run XL Reporter.....
Then Go to Tools and there you find XL reporter option. Open this and Import the XL file for DSA.....
You can find this DSA XL File in SAP Source Setup and Package folder Indian Legal Reports.....
Regards,
Rahul

RG 1 register is missing

Hi
My RG 1 register is missing..Any idea about this??
Thanks

Hi Pari
RG1 report is available in EX-reporter.
The name of the report is DSA (Daily Stock Account)
regards
Kamlesh

When does a clock signal appear on a RTSI bus using DAQmx for a PCI NI-4472 DSA?

Hello,
I am trying to synchronize several PCI NI-4472 DSA boards over a RTSI cable using MATLAB. I have read that with DAQmx it is not necessary to use DAQmxExportSignal to put the clock signal on a RTSI line provided that the RTSI cable is registered in MAX and that the DSA cards are listed as being connected to the RTSI device. Apparently, the DAQmx drivers are supposed to route the clock signal between the cards as required….
So I have done the above and see in MAX, in the device routes tab for Dev1, that
/Dev1/ai/SampleClock uses RTSI6
/Dev1/ai/SampleClockTimebase uses RTSI8
Right now I am monitoring the RTSI lines on an oscilloscope in the hopes of detecting a clock signal on one of the three boards in the system while one board (the eventual master) is acquiring data using the Test Panels in MAX. I am getting nothing on the ‘scope (may be monitoring the wrong line – have just posted a request for RTSI pinouts for this DSA) and am wondering under what circumstances is the clock present on the RTSI bus.
My real problem is that MATLAB R14SP3 does not yet support a master card in a synchronization application but, oddly enough, seems to allow one to setup slave cards. I would like to continue using the MATLAB data acquisition toolbox to manage the DSA cards and the application and would rather avoid using calls the DAQmx dll library. (It's not clear how to integrate the functionality of the data acquisition toolbox with direct calls to the DAQmx library.) So I am looking for a workaround to get the clock signal on the RTSI bus so that I may try out the slaves.
Thanks,
Sebulba

Hi
Both ports of a two port CAN board are handled by one processor and they use the same memory for alocating the necessary queues.
But, both ports if connected to different CAN buses have their own handle, own queues and error handling. That means if one Bus enters to BUS OFF, the second bus can still communicate. And you can stop and restart communication independently on both ports. Even the ncaction reset works on a single port at a time.
DirkW

RG1 register in 2005B missing

Hi
i could not find RG1 register of excise in 2005B pl42.
plz solve the problem.
Thanks

SAP Business One offers following Excise Related reports as XL Reporter reports:
MonthlyAndAnnualReturn.ixr
RG23A1.ixr
RG23A2.ixr
RG23C1.ixr
RG23C2.ixr
RG23PLA.ixr
SalesTaxRegister.ixr
ST_3.ixr
VATReturn.ixr
Once you download a Patch for 2005B SAP B1 from the SAP Portal, You can find the following XLR Report files in the folder:
Packages\Country-Specific Content\India
If you are using 2007B, you'll have following reports
DSA.ixr
ER-1.ixr
MonthlyAndAnnualReturn.ixr
PurchaseRegister.ixr
RG23A1.ixr
RG23A2.ixr
RG23C1.ixr
RG23C2.ixr
RG23PLA.ixr
SalesRegister.ixr
SalesTaxRegister.ixr
ST-3-halfyear.ixr
ST-3-month.ixr
ST-3-quarter.ixr
ST_3.ixr
VATReturn.ixr
Once you download a Patch for SAP B1 2007B from the SAP Portal, You can find the following XLR Report files in the folder:
Packages\Country-Specific Content\IndianLegalReport

Error while registering to get Safari signed certificate for the extensions..

I am a new user for Safari, I want to create an extension for Selenium, When i entered my personal details and tried to register for Safari Dev Center, at the last step of registration process, its failing, Pls help me how to get the certificate.

what key algorithm did you specify when generating the original private/public key pair?
if it was DSA, then the last i heard was that verisign does not certify DSA public keys (i believe you confirmed that as well).
if it was RSA, then it doesn't make sense to specify SHA1WithDSA as the signature algorithm when generating the certificate request. the private key corresponding to the public key (to be certified) must be used to sign the request. so the signature algorithm should be either SHA1WithRSA or MD5WithRSA, or something like that.
i don't know for sure, but verisign should support both.

Trying to register the VirtualBox kernel modules using DKMS [FAILED]

Hi,
I am getting the following error while installing Oracle VirtualBox on OEL 5.2, 64-bit.
I am able to see Virtual Machine Wizard from "Applications > System Tools > Oracle VM VirtualBox". Can I go ahead and do 11gR2 RAC installation using Oracle VirtualBox ???
If I need to install DKMS kernel modules please let me know how to do that.
====================================================================================
[root@linux2 OracleVM]# rpm -Uvh VirtualBox-4.1-4.1.18_78361_rhel5-1.x86_64.rpm
warning: VirtualBox-4.1-4.1.18_78361_rhel5-1.x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 98ab5139
Preparing... ########################################### [100%]
1:VirtualBox-4.1 ########################################### [100%]
Creating group 'vboxusers'. VM users must be member of that group!
No precompiled module for this kernel found -- trying to build one. Messages
emitted during module compilation will be logged to /var/log/vbox-install.log.
Stopping VirtualBox kernel modules [ OK ]
Uninstalling old VirtualBox DKMS kernel modules [ OK ]
Trying to register the VirtualBox kernel modules using DKMS [FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [ OK ]
Starting VirtualBox kernel modules [ OK ]
====================================================================================
Thanks.
-Joy.

And this relates to RAC, ASM, and Clusterware installation in what way?
Please lock this thread and open one in the appropriate forum. Thanks.

KABA connection issue - program not registered

I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.

Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor.

Register the partner application through SSO Administer Partner Application

When should I use the "Administer Partner Applications" link on the SSO Server Administration page to register the application among the following cases?
1. sign-on SDK integrated application
2. mod_osso integrated application

Were you able to resolve the issue???
Can you pls try Rerunning ssodatan/x with the correct data. The ssodatan script is located in the directory ORACLE_HOME/portal30/admin/plsql/ssodatan.
Refer following link for more info on SSODATAN , SSODATAX and DIAGNOSTICS scripts in Portal 3.0.x:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136138.1

Apex application registered with sso as partner application

We have 1 apex app registered with sso and working properly.
I just registered a new apex application with sso. when i authenticate through sso, it directs me to the originally registered application.
I went in through the portal administrator app and verified my settings all pointed to the new application. I verified that my dad is set up correctly.
Any ideas?
APEX 2.0

i did register and obtain the keys through portal admin.
to ensure i used the proper keys (i guess there is a possibility i used the keys from db1 registration) i re-ran regapp with the right keys but recieved the following output:
SQL> @regapp
Partner Application Configuration
Enter value for listener_token: HTML_DB:050iasphttp.xxx.na.xxx.com:7777
Enter value for site_id: EFBE3E14
Enter value for site_token: MSMXURH1EFBE3E14
Enter value for login_url: https://050iaspdb.xxx.na.xxx.com:4443/pls/orasso/orasso.wwsso_app_admin.ls_login
Enter value for encryption_key: 2EBDD126A3A40606
Enter value for ip_check: N
ERROR: Error in registration. Please try again
User-Defined Exception
Registration successful.
Listener token: HTML_DB:050iasphttp.xxx.na.xxx.com:7777
Site id : EFBE3E14
Site token : MSMXURH1EFBE3E14
Encryption key: 2EBDD126A3A40606
Login URL :
https://050iaspdb.xxx.na.xxx.com:4443/pls/orasso/orasso.wwsso_app_admi
n.ls_login
Logout URL :
https://050iaspdb.xxx.na.xxx.com:4443/pls/orasso/orasso.wwsso_app_admi
n.ls_logout
IP check : N
PL/SQL procedure successfully completed.
Commit complete.
No errors.
SQL>
...in spite of the error, i aske the app developer to try and use sso for db2. he now recieves:
User-Defined Exception
Error Error in wwv_flow_custom_auth_sso.process_success:l_sso_user_name:l_sess_id:: Please contact administrator.
OK
any ideas?

I have downloaded Instagram through iTunes, but have no way to register. When I login, it doesn't recognize me.

Please help me to use Instagram. I downloaded it through iTunes, but am unable to Login. Somewhere I missed the opportunity to register. I'm too old to know these things.

Copy the ENTIRE iTunes folder from the old computer to the new computer.

I am trying to use eprint and when I login it says my email address isnt registered

i am trying to use eprint, it says login, login says I am not registered, so I use create function, it says my email address in already in use, so I try retrieving password, then it says email address doesnt exist. so I can not use eprint.

Hi,
I would guess this is an AIM valid Screen Name such as an Apple issued @mac.com account.
I would also guess you travel to other countries.
There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
Can you Log in here https://settings.aim.com/ ?
Is this where you saw the Suspended message ?
For AIM issued name the answer is to change your Password as this tends to prove you own the account.
This does not work for Apple IDs used as AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
More recently this has been a sticking point. It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
10:39 PM Saturday; October 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

J1IG Excise invoice is not capturing in RG23D Register

Dear Experts,
while making GR for the materiel,Excise tab is updating in MIGO header level.but user select no excise entry here.while
excise capturing with J1IG,its not updating RG23D Register.a internalnumber is generating while capturing J1Ig,but its not
updating in RG23D Register,please sugest me,we are mainating J1ID and Excise data in vendor master.please suggest what might be wrong?
Regards,
Varun

Hi,
In SPRO-Log Gen- Tx on goods movement- India-Business Transactions-Incoming Invoice- Specify which movements involves excise invoice.
Assign 101- No excise entry(Also 105 if you are using 103,105)
Now in J1ID, material & chapter ID combination- maintain it as a 'N-Noncenvatable'.
Regards,
Piyush

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

DSA/RG Register

Similar Messages

Maybe you are looking for