DSCC6 cannot add new servers

I have setup Directory server and Directory server control center (DSCC), just like to add server via DSCC, but after putting in details , I get a box say "Could not contact DSCC agent on [hostname]. Use command cacaoadm to check the DSCC agent is installed and running on port 11162"
I checked , 11162 is being listened , and #cacaoadm status reports
default instance is DISABLED at system startup
smf monitoring process:
2081
2082
Uptime 0 days, 0:31
Any hints would be helpful, thanks in advance
Brian

If you deployed DSCC using the installed version of Application Server in Solaris, you may need to modify the java version that App Server is using. To do this, edit /usr/appserv/config/asenv.conf and change this entry:
from
AS_JAVA="/usr/j2se"
to
AS_JAVA="/usr/java"
on a recent Solaris 10 install, you'll have:
[276]: /usr/j2se/bin/java -version
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
[277]: /usr/java/bin/java -version
java version "1.5.0_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_15-b04)
Java HotSpot(TM) Server VM (build 1.5.0_15-b04, mixed mode)
and you need the more recent version of java to get this to work properly.

Similar Messages

Cannot add new items to a value list in AW database

I have a database which I have been using for many years. One of the fields is a value list. I just went to add another item to the list, and no matter what I do, the Create button is grayed out. I have another value list in the same database that works fine.
There are currently 170 items in the value list that is causin the problem, but I didn't think that there was a limit to the number of items that can be is a value list. (At least there is nothing in the AW technical specifications to indicate thin. I duplicated the existing database, deleted about 20 items from the list, then saved the file, and reopened it, and still cannot add new items to that value list. Does anyone know what might be causing the problem?

Oops
I read too fast.
Here is a short script which may help.
Replace the pop-up item by a text one and edit the property myList in my script to fit your needs.
Select the field to fill and run the script.
Then choose an item in the displaid list. It will be pasted in the selected field.
This trick would give you to work with a "no limit" list of items.
-- [SCRIPT DB fillFieldFromAlist ]
Assuming that
the front document is a database one
and that a text field is selected,
run the script to select an item in a list
and paste it in the field.
Yvan KOENIG, Vallauris (FRANCE)
le 19 mars 2007
property MyList : {"item 1", ¬
"item 2", ¬
"item 3", ¬
"item 4", ¬
"item 5", ¬
"item 6", ¬
"item 7", ¬
"item 8", ¬
(* edit the list to fit your needs *)
tell application "AppleWorks 6"
activate
tell document 1
set laClasse to (get class of selection)
if laClasse is not field then return (* the selection is not a field *)
set myItem to choose from list MyList
if myItem is false then return
set the clipboard to myItem's item 1
select menu item 7 of menu 3 (*
Tout sélectionner •• Select All *)
paste
end tell -- document 1
end tell -- AppleWorks
-- [/SCRIPT]
Yvan KOENIG (from FRANCE lundi 19 mars 2007 16:44:53)

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Cannot Add New Form Fields

I'm troubleshooting a problem with an existing pdf document in our office. Though I install Acrobat I do not use it on a daily- hence my asking for assistance. The computer is an Optiplex 745 running WIN XP Pro SP 2 with all updates.
The doc is a 42 page human resources document that has both scanned and original (made in Word/Acrobat) pages. Though I can edit existing fields/boxes, I cannot add new ones. I can select "add fields", click and drag seeing the crosshairs and field/box area, but when I let go, nothing happens. No new field and no erorr messages.
I've checked the security- it's wide open (no security) and layers- it has none or only one. The user who reported the problem is using Acrobat 5.x, I've tested it in 5.x, and 9 (standard and pro) on my computer with no success. I've included screenshots of the doc info below in hopes that they might provide some clues as to the problem.
Thank you for any assistance that you may provide.

After discovering that the other primary user had a local copy of this form- I tried that in Acrobat 9 and it was editable. So it appears that it was the form itself.
I'm resaving the local document to the network drive (where the problem doc came from) and updating both primary users to Acrobat 9. One was using 5 the other 7. Hopefully that will prevent any further problems.
Thanks for your assistance.

Cannot Add new line using BI IP query

Hi All,
We have created a planning application (BI IP Query) and used it in VC 7.1 model using BI Query Wizard service. Now we are able to customize existing rows ( existing rows are using flat file upload)... we can able to change the existing record values and save it.
But we are not able to add new line... its going to dump... We are able to add new line using WAD with same query but not in VC 7.1
This issue is same as below 2 threads...
Re: How to create new records through a VC form in an input-ready query??
Re: Cannot add new records through VC form when consuming IP write back query?
Thanks,
PradeeP

Its working now... SAP has given the fix (patch) for this issue when we deployed it, everything is working fine... I think they will release this fix (patch)soon...
Raise an Sap OSS message for solution

Cannot add new selectors or edit existing CSS file with my Mac

I have just subscibed to Dreamweaver CC and I cannot add new selectors or edit the exisiting "main" css that comes with the tutorial. When asked to add selector a box appears but when I press enter/return twice it disappears. Also there is no option to edit existing properties. for example, to change a font color I pick color but there is no enter or "OK" option. I'm very puzzled and stuck.

The trial version of Dreamweaver is fully functional. The only limitation is that it stops working after 30 days. If you're having problems with getting the software to work correctly, it might be a good idea to try posting a question in the Downloading, Installing, Setting Up forum, mentioning the fact that you've already posted here (otherwise, they might just transfer you back to this or one of the other Dreamweaver forums).
If you can't make changes to files, it might have something to do with permissions or the user account that you've logged onto the computer with.
When asking for help in the other forum, mention your operating system, and which version you're using. The problem might be related to your computer setup.

Cannot add new contact or edit existing one

Cannot add new contact or edit existing one. TH GSM, curve 8900, OS v5.0.01067, file free none ,battery pull didn't fix the problem, applications Google maps 3.0.2, whatsapp 2.6.2177. Device even freezes when trying to add or edit . Thanks

I am having the exact same problem!! I hope we get an answer.

Iphone 4s calendar events disappeared and I cannot add new events

I have an iphone 4s with ios 7. Suddenly all events I added on my calendar disappeared and I cannot add new events. The plus sign+ is there but it is light grey and will not activate. I do not sync it with any other calendar

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Cannot Add new fields to standard QM datasource

Hi
I got this erro when I try to add new fields from LBWE.
Field ZZRFKIMG cannot be selected because of unit field VRKME -> see long text
Message no. MCEX032
Diagnosis
Field ZZRFKIMG cannot be transferred, since its unit field VRKME is either not in the communication structure, or was purposefully excluded from the selection.
Procedure
If you have chosen your own field, you must also create a user-defined unit field in the append and use it accordingly.
How can I resolve it.
thanks

Hi,
My Understanding is that if the field is available in the Pool in LBWE then no need to enhance the datasource.
In my case the field is available in LBWE though it is ZFIELD (ZZRFKLMG and ZZNETPRC).
In RSA6 I added the this unit
ZZMEINS     MEINS     UNIT                                                                           Base Unit of Measure
ZZWAERK     WAERK     CUKY                                                                           SD Document Currency
I went back to LBWE and try to add the following Zfieds (ZZRFKLMG and ZZNETPRC) and the error is same.
Now I try to add the the field directly in the append structure * ZZMC05Q02ITM* but its asking to maintain the ref table and ref field.
I added ZZMC05Q02ITM as ref table and ZZRFKLMG as ref unit and I still get errors.
I am are that if I maintain it in RSA6 then I need to write user exit in CMOD but since it is available in LBWE I want to get it from the pool.
I have tried this and there was no errors during activation
ZZRFKLMG     ZZRQE_RFKLMG     QUAN     QMFE     ZZMEINS     Notification quantity in base units
I gave the table name and Unit.
Despite adding it, I still get data even though I did not used LBWE pool.
thanks alot SUV123
Edited by: Bhat Vaidya on Oct 14, 2009 10:44 AM
Edited by: Bhat Vaidya on Oct 14, 2009 11:06 AM

Disks not avialable and cannot add new disks to existing pools

I have a few disks that are RAW and I want to add them to existing pools. However, only 1 disk shows up as a Primordial disk and the others do not. I cannot add these drives to a new volume and when I try to add any drive to an existing
pool, the add disk option is greyed out. I have search everywhere to resolve this but no luck.
What is interesting is one of the drives that shows available for a volume is the drive I have associated to backing up the OS on the server itself and is initialized, i.e. not RAW.

Hi,
Please try to run the following commands in PowerShell to obtain the information about disks:
Get-physicaldisk
Get-disk
In additional, the physical disk added to a storage pool must be 4GB or larger. If the space is less 4GB, the disk will not appear in the storage pool window.
For more information, please refer to the thread below:
Storage Pool in WS2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d230ef80-8791-4eaf-84b5-a41b8f7fef10/storage-pool-in-ws2012?forum=winserver8gen
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ICal 3.0.6: all events gone, cannot add new events either, needs force quit

Hello,
I am experiencing the same behaviour seen by others on the list. It probably occured due to the OSX upgrade to 10.5.6. I hadn't used iCal much since Dec 10 or so and only noticed the anomalous behaviour yesterday.
What I see:
- iCal comes up but all previous events are no longer in it
- The default Home and Work calendars are also gone
- The left bottom section of iCal shows January 2001 and the forward/back buttons do not work in the this subwindow
- I cannot add any new events
- I can only close iCal by using force quit
My events and calendars files are still available in the ~\Library\Calendars folder but I cannot import them into iCal. File->Import->Import an iCal file does not work (a finder like window does not appear to allow me to choose a file).
I have tried the following:
- moving com.apple.iCal.plist to the desktop and login/logout
- moving Calendar Cache to the desktop and login/logout
- login using another account and tried to use iCal. no go.
I haven't tried to install an older version of iCal from the OSX DVD yet.
Any ideas?

I am having the same behavior. In the past with many major OSX upgrades this has happened and I had to get a previous copy from Time Machine. Right now my Time Machine copy is dead and I can't do it. I tried getting an older copy of iCal but it is exhibiting the same behavior!! I can't synch the calendar with my iPhone, either! No, I do not want to reinstall Leopard from scratch on this machine just to replace iCal - that is ABSURD!! This is the 3rd or 4th time this has happened. I don't have 4 - 6 hours of my time to fix this kind of problem every couple of months - not to mention several spare hard drives, etc.
What is causing this problem, and how can we get iCal back??
How about a simple iCal reinstall utility page on the Apple Web site if this is going to keep happening??

TS3999 Calendar - cannot add new event

After last iOS update I can no longer add new events to my calendar. I also cannot turn on my location services.

Welcome to the Apple Community.
Do you have restrictions turned on.
(Settings > general > Restrictions)

Cannot add new components in Object Browser

Hi,
We have a complex file with about 80 components. The problem is that when I try to add new components, they're not visible in Object Browser. It's possible to drag components into canvas, but not only they don't appear in object browser but also vanish after saving and re-opening the file.
No error messages or hang-ups. It's just as if adding become disabled or something.
I'll appreciate nay help on this

Is the new component hidden in the grouped objects, can you see it in the Objects browser?
You can drag a component out of a grouped object from within the object browser. Select the component and drag it up onto the grouped component name, it should then be outside of the grouping.
What version of Xcelsius are you using?
Regards
[Charles|http://www.reportex.co.uk/xc_waterfallchart.html]

Cannot "Add new Item" in my SharePoint 2010 custom lists

Hi guys,
All these days it was working fine and all of sudden now when i click on "Add new item" in the the custom lists which i have created in my SharePoint 2010 and fill in the fields and click "save",
I am getting an exception...:(
Please HELP!!!
Neo Alpha

One more thread for the same issue
http://social.msdn.microsoft.com/Forums/en-US/51f37f3b-18a3-4d6b-b90f-2a4240306bf8/when-update-a-folders-property-it-throw-a-comexception-0x81020089
hope this will help you
Senthilrajan Kaliyaperumal

User cannot add new task in a project

Hi everyone,
I've got a issue with Project Server 2013.
The situation : I create a new project then, I add some resources (which are users of the AD) and I don't add new task in this project because I want that the user creates all the task.
But when he's in the "Task" page (PWA/Tasks.aspx) and he want to add a new task (ribbon TASKS -> Add a row -> Add a new Task), the new project is not present in the drop down "Project" , if I want that the project
appears, I need to add a task with the user as a ressource.
Is there any way to automatically add the project in this list without add a task for the specific resource ?
Thanks,
Patmol

Hi Patmol6,
Please note that PWA/My task is NOT INTENDED to create tasks and assign them to resources. The process to create a project plan at project initiation and to assign resources to tasks must be done:
either in Ms Project Pro connected to your server and using enterprise resources,
or with PWA: open your project from the project center, then navigate to the schedule page, edit the schedule, create the build team, create tasks and assign resources on tasks.
"My task" page in PWA is meant to make tasks updates by team members.
Hope it clarifies the process.
Guillaume Rouyre - MBA, MCP, MCTS

DSCC6 cannot add new servers

Similar Messages

Maybe you are looking for