Dsccsetup ads-create fails on windows
Hi,
Trying to install DSEE.6.3 on a windows server 2003.
When running dsccsetup ads-create, I get the following error message (after the output 'Creating DSCC registry...):
rc = 11
E:/DevTools/DSEE/ds6/bin/dsadm.exe exited with unexpected error code 11
com.sun.directory.common.slapx.AdmCmdErrorException: E:/DevTools/DSEE/ds6/bin/ds
adm.exe create -p 3998 -P 3999 --pwd-file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\a
ds34971.tmp E:/DevTools/DSEE/var/dscc6/dcc/ads
at com.sun.directory.common.slapx.AdmCmd.run(AdmCmd.java:84)
at com.sun.directory.common.slapx.AdmCmd.run(AdmCmd.java:51)
at com.sun.directory.dcc.ads.ADSInstall.createADSInstance(ADSInstall.java:628)
at com.sun.directory.dcc.ads.ADSInstall.create(ADSInstall.java:249)
at com.sun.directory.dcc.cli.setup.CmdAdsCreate.performCreate(CmdAdsCreate.java:129)
at com.sun.directory.dcc.cli.setup.CmdAdsCreate.perform(CmdAdsCreate.java:59)
at com.sun.directory.clip.ClipSubcommand.execute(ClipSubcommand.java:89)
at com.sun.directory.clip.FriendlySubcommand.execute(FriendlySubcommand.java:55)
at com.sun.directory.clip.ClipParser.execute(ClipParser.java:196)
at com.sun.directory.dcc.cli.setup.SetupMain.main(SetupMain.java:30)
Sofware installation is probably incomplete or corrupted
Does anyone know what error code 11 is, and where I can go from here?
Thanks!
stefan
Can you post the errors log from the ADS instance? Not sure if it anything would be there though.
- how about running it with a verbose option (-v)
Easiest would be to dismantle and recreate ads.
E:/DevTools/DSEE/dscc6/bin/dsccsetup dismantle
E:/DevTools/DSEE/dscc6/bin/dsccsetup initialize
Similar Messages
-
New Database Create Fails in Windows 2003
I have just installed Oracle9i on Windows 2003 Enterprise Edition without any problems (Server software -> New version of the Installer -> Patchset). Then I tried to create a new database with the DBCA (Database Creation Assistant). Although I can create the template without any problems, the db creation fails with a messagebox showing "CreateProcess: null -new -sid GTPORA -startmode m error=2". Then it gives me a ORA-12560 error. Can anyone assist here ?
I have installed 9.2.0.3 following the instructions - server; new installer; then the patchset. It looks like a problem of the Java environment that DBCA is using but I am not sure.
-
Dsccsetup.exe ads-create is not working as expected
Hi,
I have installed DSEE 6.3 and I have created DS instances also. But when I am trying create a DSCC registry with the command 'dsccsetup.exe ads-create' then it is not doing anything. I am not getting any errors either. Just it is skipping to the command prompt. I am trying to do this on windows 2003. I have no idea where to start to troubleshoot this.
D:\Program Files\sunone\dscc6\bin>dsccsetup.exe ads-create
D:\Program Files\sunone\dscc6\bin>That is strange. Can you check if the registry already exisits? It should be in D:\Program Files\sunone\var\dscc6\dcc\ads
If it does not exist, can you please try running this command instead and let us know what happened?
d:\> dsccsetup.exe initialize
Also, this tool might be useful: [http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx|http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx]
Edited by: etst123 on Jul 15, 2009 1:55 PM -
The processing of Group Policy failed. Windows attempted to read the file...
Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again! -
Automatic Install of Endpoint Protection fails on windows 8.1 clients with SCCM 2012 R2
Running SCCM 2012 R2 and deploying CM clients and Endpoint Protection via software updates. CM client and EP install fine on Windows 7 clients. CM client installs fine but endpoint protection fails on Windows 8.1 clients with the following from the
endpoint protection agent log:
<![LOG[Create Process Command line: "C:\Windows\ccmsetup\SCEPInstall.exe" /s /q /policy "C:\Windows\CCM\EPAMPolicy.xml".]LOG]!><time="12:22:02.560+240" date="08-13-2014" component="EndpointProtectionAgent"
context="" type="1" thread="4260" file="epagentutil.cpp:607">
<![LOG[Detail error message is : [EppSetupResult]
HRESULT=0x80070643
Description=Cannot complete the System Center Endpoint Protection installation. An error has prevented the System Center Endpoint Protection setup wizard from completing successfully. Please restart your computer and try again. Error code:0x80070643. Fatal
error during installation.
So on the win8.1 client I run the above command line manually in a command window and receive Access is denied. Then I run the same command in an elevated command window and EP installs fine. Does this have something to do with why the automatic
EP client install fails with the 0x80070643 error code? If so, what is the fix?Hi,
Try uninstalling any other security software.
For more information, please review the link below:
I‘m getting an error code from my Microsoft security software
http://www.microsoft.com/security/portal/mmpc/help/errorcodes.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Running ant build scripts from cmd fails on Windows Server
Hi all!
I'm trying to build and package ME on a Windows Server calling the ant build script targets from cmd. This works fine on a Windows XP machine. On a Windows Server machine however the ant internal calls to nwcetool.bat are failing because -files are not found in DEPLOYARCHIVES. And these files are really not there although they should have been created by nwcetool.
Does anyone have a clue why calling ant build script in cmd on a Windows XP machine will work but fails on Window Server?
Thanks a lot!And this is part 2 :
package.sca.impl:
delete Deleting directory C:\SAP\SAPME\SDK\build\results\server\package.sca
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca\ear
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\BUILDARCHIVES
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\DEPLOYARCHIVES
delete Deleting directory C:\SAP\SAPME\SDK\build\results\server\create.application.xml
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\create.application.xml
echo 2011-04-07 09:33:45 Creating application descriptor.
xslt Processing C:\SAP\SAPME\SDK\extension\META-INF\application.xml to C:\SAP\SAPME\SDK\build\results\server\create.application.xml\application.xml
xslt Loading stylesheet C:\SAP\SAPME\SDK\build\xslt\create-application-xml.xslt
xslt ejbModule=
xslt webModule=salt-webservice
copy Copying 1 file to C:\SAP\SAPME\SDK\extension\META-INF
delete Deleting directory C:\SAP\SAPME\SDK\build\results\server\merge.application.xml
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\merge.application.xml
echo 2011-04-07 09:33:45 Merging application descriptor "C:\SAP\SAPME\SDK\extension\META-INF/application.xml" with "C:\SAP\SAPME\SDK\build\results\server\master\resources\xml/application.xml".
xslt Processing C:\SAP\SAPME\SDK\build\results\server\master\resources\xml\application.xml to C:\SAP\SAPME\SDK\build\results\server\merge.application.xml\merged.xml
xslt Loading stylesheet C:\SAP\SAPME\SDK\build\xslt\jee-application-merge.xslt
xslt jee-application-merge: file to merge is C:\SAP\SAPME\SDK\extension\META-INF/application.xml
xslt jee-application-merge: checking for module conflicts...
xslt jee-application-merge: Base EJBs=me.activity.ejb-5.2.5.3-Base.jar m
e.alarm.ejb-5.2.5.3-Base.jar me.appconfig.ejb-5.2.5.3-Base.jar me.backgroundproc
ess.ejb-5.2.5.3-Base.jar me.browse.ejb-5.2.5.3-Base.jar me.common.frame.ejb-5.2.
5.3-Base.jar me.container.ejb-5.2.5.3-Base.jar me.correctiveaction.ejb-5.2.5.3-B
ase.jar me.customdata.ejb-5.2.5.3-Base.jar me.datacollection.ejb-5.2.5.3-Base.ja
r me.dbsequence.ejb-5.2.5.3-Base.jar me.defaultvalue.ejb-5.2.5.3-Base.jar me.dem
and.ejb-5.2.5.3-Base.jar me.integration.xml.ejb-5.2.5.3-Base.jar me.inventory.ej
b-5.2.5.3-Base.jar me.nonconformance.ejb-5.2.5.3-Base.jar me.productdefinition.e
jb-5.2.5.3-Base.jar me.production.ejb-5.2.5.3-Base.jar me.status.ejb-5.2.5.3-Bas
e.jar me.numbering.ejb-5.2.5.3-Base.jar me.diagnostics.ejb-5.2.5.3-Base.jar me.d
ocument.ejb-5.2.5.3-Base.jar me.httpserver.ejb-5.2.5.3-Base.jar me.integration.c
nc.ejb-5.2.5.3-Base.jar me.integration.collaboration.ejb-5.2.5.3-Base.jar me.int
egration.sap.ejb-5.2.5.3-Base.jar me.labor.ejb-5.2.5.3-Base.jar me.user.ejb-5.2.
5.3-Base.jar me.ods.ejb-5.2.5.3-Base.jar me.plant.ejb-5.2.5.3-Base.jar me.produc
tiondate.ejb-5.2.5.3-Base.jar me.reasoncode.ejb-5.2.5.3-Base.jar me.reporting.ej
b-5.2.5.3-Base.jar me.rtw.ejb-5.2.5.3-Base.jar me.script.ejb-5.2.5.3-Base.jar me
.security.ejb-5.2.5.3-Base.jar me.solutionverification.ejb-5.2.5.3-Base.jar me.t
imegranularity.ejb-5.2.5.3-Base.jar me.tooling.ejb-5.2.5.3-Base.jar
xslt jee-application-merge: SSP EJBs=
copy Copying 1 file to C:\SAP\SAPME\SDK\build\results\server\sda\META-INF
copy Copying 163 files to C:\SAP\SAPME\SDK\build\results\server\package.sca\ear
jar Building jar: C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\BUILDARCHIVES\me.ear
echo 2011-04-07 09:33:45 nwce.tool=C:\SAP\SAPME\SDK\build\tools\ceclt\nwcetool\nwcetool.bat, nwce.tool.lib=C:\SAP\SAPME\SDK\build\tools\ceclt\lib, CECLT JDK=C:Program Files (x86)Javajdk1.5.0_22
echo 2011-04-07 09:33:45 Executing CECLT with the following arguments:
-c "createsda -n me/ear -v sap.com -l local -type J2EE -counter 5.2.5.3.330 -scn
ME -scv sap.com -deps sap.com:me/security/loginmodule BUILDARCHIVES\me.ear DEPLOYARCHIVES\me.web-ext.sda-5.2.5.3-Base" -e
exec The filename, directory name, or volume label syntax is incorrect.
exec Result: 1
BUILD FAILED
C:\SAP\SAPME\SDK\build\script\build.dev.sobsap2.xml:1665: The following error occurred while executing this line:
C:\SAP\SAPME\SDK\build\script\build.dev.sobsap2.xml:1723: Warning: Could not find file C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\DEPLOYARCHIVES\me.web-ext.sda-5.2.5.3-Base.ear to copy. -
CRM 7.0 installation failed on Windows 2008 R2 SQL Server 2008 SP1
Hello I'm currently trying to install CRM 7.0 on a windows 2008 R2 (64B) plateform with SQL Server 2008 SP1 as database engine
while launching sapinst.exe i'm facing this issue that i cannot get rid of it
Could someone Help , would really be appreciated as i'm a newby on SAP world
thanks a lot
Unable to start a service execution. Please check the following information for the possibble reason and inform the installation development : Opened sylib701_1.dll exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Opened C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/jre'. exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/SAPINS~1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iakdblib701_1.dll This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 01:51:15 MessageLib initialized successfully. showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 169.254.138.68 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Windows\System32\x. Removing file C:\Windows\System32\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI current working directory is C:/Windows/System32 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Unable to open URL file://C:\Windows\System32\control.xml. The execution will be terminated now.Hi!
Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released, so you may get it to run technically but not everything is tested and so, you should not install any SAP system on it!
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873] ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
[SAP on Microsoft Windows|SAP on Microsoft Windows] --> Support of Microsoft Windows Server 2008 R2
Cheers! -
CryptDecrypt function failing on Windows Server 2012
Hi,
I have a sample program which does encryption / decryption.
This program works on Win7 and Win8.1 but fails on Windows Server 2012.
Please can somebody help me on resolving this issue?
const char KEY_FILE[255] = "C:\\key.txt";
In Constructor:
dwResult= 0;
hProv = 0;
hKey = 0;
hSessionKey = 0;
cbBlob = 0;
pbBlob = NULL;
cbBlob = file_length(KEY_FILE);
pbBlob = (BYTE*)malloc(cbBlob + 1);
memset(pbBlob, 0, cbBlob + 1);
FILE *fp = fopen(KEY_FILE, "rb");
if (fp) {
fread(pbBlob, 1, cbBlob, fp);
fclose(fp);
} else {
free(pbBlob);
pbBlob = NULL;
if (!CryptAcquireContext(&hProv, NULL, MS_DEF_PROV, PROV_RSA_FULL, 0))
dwResult = GetLastError();
if (dwResult == NTE_BAD_KEYSET)
if (!CryptAcquireContext(&hProv, NULL, MS_DEF_PROV, PROV_RSA_FULL, CRYPT_NEWKEYSET))
dwResult = GetLastError();
MessageBox("Error [0x%x]: CryptAcquireContext() failed.", "Information", MB_OK);
return;
} else {
dwResult = GetLastError();
return;
if (pbBlob) {
if (!CryptImportKey(hProv, pbBlob, cbBlob, 0, 0, &hSessionKey))
dwResult = GetLastError();
MessageBox("Error [0x%x]: CryptImportKey() failed.", "Information", MB_OK);
return;
} else {
if (!CryptImportKey(hProv, PrivateKeyWithExponentOfOne, sizeof(PrivateKeyWithExponentOfOne), 0, 0, &hKey))
dwResult = GetLastError();
MessageBox("Error CryptImportKey() failed.", "Information", MB_OK);
return;
if (!CryptGenKey(hProv, CALG_RC4, CRYPT_EXPORTABLE, &hSessionKey))
dwResult = GetLastError();
MessageBox("Error CryptGenKey() failed.", "Information", MB_OK);
return;
//{{AFX_DATA_INIT(CCryptoEncryptionDlg)
m_cipher = _T("");
m_clear = _T("Encrypt me");
When I click on Encryption Button:
UpdateData();
unsigned long length = m_clear.GetLength() +1;
unsigned char * cipherBlock = (unsigned char*)malloc(length);
memset(cipherBlock, 0, length);
memcpy(cipherBlock, m_clear, length -1);
if (!CryptEncrypt(hSessionKey, 0, TRUE, 0, cipherBlock, &length, length))
dwResult = GetLastError();
MessageBox("Error CryptEncrypt() failed.", "Information", MB_OK);
return;
m_cipher = cipherBlock;
m_clear = "";
free(cipherBlock);
UpdateData(FALSE);
When I click on Decrypt button:
UpdateData();
unsigned long length = m_cipher.GetLength() +1;
unsigned char * cipherBlock = (unsigned char*)malloc(length);
memset(cipherBlock, 0, length);
memcpy(cipherBlock, m_cipher, length -1);
int retVal = CryptDecrypt(hSessionKey, 0, TRUE, CRYPT_DECRYPT_RSA_NO_PADDING_CHECK, (BYTE*)cipherBlock, &length);
if (!retVal)
dwResult = GetLastError();
MessageBox("Error CryptDecrypt() failed.", "Information", MB_OK);
return;
dwResult = GetLastError();
m_clear = cipherBlock;
m_cipher = "";
free(cipherBlock);
UpdateData(FALSE);
The source is from http://www.codeproject.com/Articles/11578/Encryption-using-the-Win-Crypto-API
I just got the source code from above link and compiled in VS2012. The same code works as-is in Win8.1 but fails in loading itself in Windows Server 2012.
Thanks in advance.
Regards,
RajWindows CE is pretty old but I see that used a bit in 3rd world markets where people are not rich enough to afford more modern gear.
I use 7-zip for backups, and the SDK is open source which means it can be used in another project such a specialized backup or other tool
7-zip has the AES in the SDK which is been checked as solid.
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat? -
I can only create tabs by clicking on a link in an email or a program or a link in the window I am viewing. It will NOT create a new tab when I click on the tab to create a new tab, nor will it create a new tab when I right click on the tab & click on create a new tab. I'm used to using tabbed browsing all the time & it's driving me nuts. HELP!
I have not downloaded any new updates on any software or downloaded any new software in the hours before this started happening.
Just to clarify about my original question. I meant to say that firefox will create a new window when I right click & click on create a new window but will not create a new tab when I click on create a new tab. I think what I wrote may have been somewhat confusing.Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Open Link in New Window creates an invisible window (visible after restarting).
When I use the right mouse button menu to Open Link in New Window from a web page it creates an invisible window. That is, I cannot see the window but it is listed in the Firefox Window menu. This newly opened window cannot be selected either by mouse or from the Window menu. However, if I quit and restart Firefox the new window appears as 0 pixels wide (i.e., a 1 pixel wide vertical line) and I can select it (by mouse or Window menu) and zoom it from the Window menu. After zooming I can operate on the window normally.
Get Firebug and inspect the element. You'll see that it actually is this:
onclick="javascript:saw.runThis
URL('saw.dll?PortalProperties&_scid=To2OnvCVXpY&PortalPath=/shared/paint/_portal/PoC\x2520FINS&Done=ManagePortals\x2526Done\x253dAdmin');return false" href="javascript:void(null)" FF doesn't even give you the "Open..." options and all IE versions as of 7 show them but actually don't do anything when you invoke them.
Edited by: Christian Berg on Sep 9, 2009 10:36 AM -
When i create a new window, firefox Yanks me back to where i was and i dont want to be yanked back.
i duplicate current pages by create new windows on a very frequent basis;
to do this, i go to the top of the page that i want to duplicate and right-click and click on Open Link in New Window;
I specifically want to duplicate the page i am on in another Window, not a new tab;
Because
Duplicating the current page to Open Link in New Tab, gives tabs on the top of my screen;
Duplicating the current page to Open Link in New Window, gives 'tabs' on the bottom of my screen;
I want 'tabs' to show on the bottom of my screen and to do that i have to Open Link in New Window;
My question and What is happening, is that firefox is yanking me back to the page that i have just duplicated by right-clicking at the top of the page and clicking on Open Link in New Window;
When i create the new Window, firefox yanks me back to the page that i just duplicated and i dont want to be yanked back to that page;
I want to stay on the page that i just duplicated.
I have tried changing the way tabs work in Options but nothing checked or unchecked results in the specific way i want to have new Windows open and STAY on that newly created Window and not be YANKED back to the window i duplicated.The original window did not have a Flash object, but does the window that hides itself contain a Flash object? That is the usual pattern for this bug in the plugin's protected mode feature.
If you have not already tried disabling it, the following pages/posts provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
More history: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash] -
I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?
I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.
-
How to create pop-up window to search for items
Hi,
I want to create a pop-up window were the user will be able to search for an item and select it.
How can I use a pop-up window in a portlet? Is there any api in the pdk for creating pop-up windows?
ThanksHi,
Can you let me know why you are trying to use a popup window for searching?
You can always add a search portlet - Basic,Advanced,Custom
- which will give you the link to the respective searched items.
I couldn't get a clear idea of your requirement.
Thanks. -
Office 2013 pro plus activation fail on windows 8
hi guys
I have issue about getting Office 2013 pro plus activation fail on windows 8 via KMS server.
When I test using KMS server via nslookup -type=srv _vlmcs._tcp all looks good with corporate KMS server.
Activation fine with windows 7 environment
Any idea
This topic first appeared in the Spiceworks CommunityHi
We recommend you download it from the website and extract it again to make sure your source install is complete.
Run setup.exe as administrator then try the install.
If the issue persists, refer to the article on General troubleshooting for installing Office 2013 and Office 365:
http://support.microsoft.com/kb/2822317
Regards
Tylor Wang
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How do you create multiple execution windows for a custom opterator interface
I am starting to create a custom operator interface for TestStand 3.5 using Labview 8.0. This is my first exposure to custom operator interfaces (and ActiveX). The example operator interfaces have only one execution window that changes based on the executions combo box. My sequence is going to be run with the parallel sequence model (2 test sockets). So I want my custom operator interface to have 2 execution windows, one for each test socket. How can I do this? I created a second execution window but it just mirrors the first execution window.
Hi, All:
With the similar approach, I create a multiple window user interface with CVI. Although it can run, the Execution view doesn't display
anything while execution. In my user interface, there is an applicaiton manager resident in Parent form, and every child forms has
itsown Exection view and Manager.
Referred to the C# sample, in the function rivate void DisplayExecution(Execution execution)
if (executionForm == null) // execution is not in a form, make a new form
executionForm = new ExecutionForm(this, this.axApplicationMgr, execution);
this.mChildFormsKeyedByViewMgr.Add(executionForm.GetViewMgr().GetOcx(), executionForm);
SetNewChildFormLocation(executionForm);
I guess the execution form "hook" the exectuion view manager via Add(), so the exectuion view can be updated properly.
And according to reference manual of teststand, it mentions that "The application sets the ExecutionViewMgr.UserData property to
attach a handle, reference, or pointer that represents the window." But when I try to utilize this method, I got 2 problems:
1. How to get a window handle of a CVI panel? As execution view are resident in child panels, so I may need the window handle of
individual child panels.
2. Even the window hanlde is gotten, how can I convert it to a VARIANT Type? According to the function panle of
TSUI_ExecutionViewMgrSetUserData (, NULL, ), the last parameter is a "VARIANT".
Any comments or instructions for my assumption?
Thank you for your help.
Maybe you are looking for
-
While Firefox 4 is a suburb application, it does not play Flash Videos and there is no add-on for that, and therefore it prohibits me from watching videos on the various news sites I visit. The previous version of Firefox Mobile supported a software
-
Shift Org unit to another Org unit
Hi Experts, I am trying to move one orgnaizational unit to another Org unit. The case is given below: Orgniazational Unit : "Stb Std" > under source : "INJ" org unit. and also I want to make it with effect from 01/07/2011. Cost Center is not inherit
-
Have compaq desk top, trying to hook up HD flat screen monitor, won't work?
Haave Compaq, desk top, trying to hook up, HD, flat screen monitor, won't work
-
Problem with output invoice SD
Hi developers, I have a problem when I must print an invoice because appairs the message' Not message available for the output'. In VV32 the condition is OK and also the customizing is OK. If open the invoice and in the header save the message of out
-
How to count no of commas in a text
hi i have one input/output field in that field mail-id will be entered. now in that text i want to count no of commas so that i can know about theno of mail ids entered.