DSD route settlement with multiple sales are

Hi folks,
I have looked in this forum for an answer for my problem but haven't found any, so i am creating this new thread.
Well i am trying to settle a shipment in /DSD/DE_ENTRY transaction with multiple sales area in it, example:
Visit 1 - Sales Org(D002) Distribution channel(GN) Division(GA)
Visit 2 - Sales Org(D002) Distribution channel(GN) Division(GB)
Visit 3 - Sales Org(D017) Distribution channel(17) Division(D1)
The problem i get is that when i settle the shipment he mixes up the sales area in the visits, so far, allways in visit 3 where he puts up D002, 17, D1, giving the error of non existent sales area when trying to create the order(he doesn't mix up for all orders, only for some ones in the visit).
Another strange fact is that i made 3 shipments with same data, and in all 3, he mixed up for different documents, in 1 he created 2 documents fine, in other one only 1, making me believe that he "randomly" atributes the sales area.
What i need is to "manipulate" or have a solution for standard doesn't mix up the sales area, and atribute the correct sales area to the orders to create based on the sales are in the visit.
Best Regards.

Thanks for the link, it's more or less the functionality that I'm looking for but the issue with BW is that I need to do the Settlement at the moment that routes are arriving "on line" and with BW I need wait the load to BW system. A lot of routes are arriving frequently.
¿Do you know a R3 functionality for this? or ¿do you know a "Shipments settlement" who has all Shipments of the route? in order to use same transaction that is by transport.
Thank's a lot

Similar Messages

  • Error while posting Customer with Multiple sales areas using DEBMAS05.

    Dear experts,
    We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05.  we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error:  "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created!  The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
    As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization).  OSS Note (384462)  provides further details about this. One Important point from the note is: 
    "As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
    Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
    For your customers, contact persons exist to which a private address or a different business address is assigned.".
    This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
    If someone have experienced the same issue before and have found a solution to it, kindly help out.

    I have found the cause and solution to this problem.
    This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
    This was resolved by splitting the IDOC into 2.
    The solution is to First post only the KNA1 segment and create the customer.
    In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”:  you would have got the KUNNR after the first step.
    Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC. 
    I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
    Cheers
    Venkat

  • Need to Create Customer Master Data under Multiple Sales Areas

    Hi Gurus,
             My requirement is to create a customer under multiple sales areas by processing the Inbound Idoc function module "IDOC_INPUT_DEBITOR"( After generating Outbound Idoc and outbound is processed successfully).
             But, when I am trying to send the multiple sales areas information in segment "E1KNVVM". It is creating the customer under first sales area filled in first E1KNVVM segment and it is giving error that "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1" and it is not creating the customer under other sales areas.
            Following are the details of the Outbound Idoc which I have processed.
            Idoc Basic type : DEBMAS06
            Message          : DEBMAS
            I have filled required fields in E1KNA1M and E1KNVVM segments. But filled E1KNVVM segments  twice with different sales area data.
          Please help in solving this problem?

    is it really just one IDOC?
    I have never seen that SAP just does a part of one IDOC.
    the structure of DEBMAS ist like this:
    E1KNA1M
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNB1M
    which means for your example it should be like this
    E1KNA1M
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNB1M
    and in this case I am very certain that it would never just process and create the part for one sales area.
    Maybe your customer already exists from ealier tests with just one sales area.
    Display your IDOC in WE02 or WE05 and make sure you have a value in name1 field

  • CDs with multiple artists are added to the library multiple times I want to be able to add the artwork to all.

    CDs with multiple artists are added to the library multiple times. Usually one has the artwork. I want to add the artwork to the others.  The instructions are inaccurate. I tried it several ways and it does not work.  How do I add the artwork shown on one of the albums to the other albums (same album, different artists)?

    Try Ethernet over Power adapters.. these are very popular for your kind of environment.. being able to make non-wireless link to another area where you can setup a wireless access point.
    Airport Express are not great for wireless power.. if you really have issues with wireless strength in a bad environment apple stuff is not the way to go.
    The comparison chart here.
    http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
    This is their worst test location you can also see averages.. the latest airport extreme.. is there a long way down.. and that is a much better wireless device than Airport Express.
    The Ubiquiti power AP is small cheap and designed for precisely this duty.. useless in an apple wireless network.. you will need to run ethernet or EOP adapters back to the main router.. but if the normal omni directional antennas don't provide enough signal you can get directional ones.. I suspect you can cover your whole apartment with a pair of these and high gain directional antenna.

  • Creating BP in multiple sales areas

    Hi Friends,
    In SD we can extend a customer master to multiple sales areas. But in CRM once I create a BP with sold to party role, I am able enter only one sales area. And if I change it, the previous sales area is gone.
    How to do this.
    regards

    Hi Rahul,
    Rather than using this manuall teqnque.. i would prefer this way.
    Let BP be created as prospect.. as ur call center operations would always be get new business from prospects..
    But yes once prospect is ready to sign the contract.. in the save of contract, maintain the role Sold-toParty of the prospect.. and hence u ensure that u don't have to manually keep track of if customer is prospect or not... but if u try to create contract,, if customer is prospect it would be also now maintained as soldto party..
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Report with multiple Detail Area

    Hi All,
    Please see the Report pointed to the link below:
    [Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
    Some Explanations:
    ========================
    (1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
    (2) The lines with "WBLNX'" "123, 123.12", 
                             "WBLNX'"
       are variable data associated with the same Heading: "ABCDEFGH..."
    (2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
    (3) Item Code Descriptions ==> is a Header Info
    (4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
    (5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
    QUESTION:
    ===================
    How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
    Thanks and Best regards,
    Felix

    Hi Felix
    You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
    Hope this helps.
    Regards
    Nikhil

  • Query to get invoice with multiple sales order

    Hi
    Our requirement is to customize the invoice report as per new requirement. For this customization we need to get the invoice which has multiple sales order with it. Please help to me get the invoice number from database which has multiple sales order with it.
    Thanks and regards,
    Sundar

    Sunder,
    interface_line_attribute6 in ra_customer_trx_all is nothing but the sales order line id. And sales_order in ra_customer_trx_lines_all is the sales order number.
    You can use the following 2 conditions to fetch your requirement.
    sales_order = TO_CHAR (order_number)
    interface_line_attribute6 = TO_CHAR (line_id)
    Please let me know if you are still facing any issue.
    Regards,
    Jyoti

  • Question - SD user exit for Billing with multiple sales orders

    We have a situation where we are summarizing Accounting Billing document updates via OBCY, transaction type VBRK .
    We will also have multiple sales orders per billing document.
    One of our accounts is a COGS- clearing account which will post for both delivery and billing documents.
    Our goal will be to clear the COGS-clearing account after the delivery and billing has occurred.
    One alternative being evaluated is to update the assignment field ( bseg -zuonr) for the sales order. 
    To do this, one of the SD user exits , perhaps SDVFX008, would be necessary to update the sales order from vbrp-vbel2 to bseg-zuonr.
    I am concerned about
    1) will the update work
    2) what will be the effect on summarization
    If we try to implement the user exit , would we be successful to just update the assignment field for just the COGS accruall account.   _Therefore the next effect is that AR,Rev, etc, would summarize , but the COGS clearing would break out due to the update to the assignment field..
    Does anyone have any experience similar to this situation.
    Thank you,
    Jeff

    Hi
    You can use SDVFX008 or FI Substitution exit RGGBS000 (Form U100)
    You can very well update the required GL (COGS Clearing) with the Sales order No... However, how exactly it would behave upon summarization, I am not sure about that.. you need to develop that and see
    In the COGS account during PGI, Sales Order No is populated always in the field "Sales Order"... In your case, the COGS clearing account should be having sales order no populated...
    So, if you are successful to populate Sales Order No during billing in the "Sale Order" Field for the COGS clearing account, that should also suffice...
    or See if you can have relevant sort key in FS00 for the COGS clearing account so that Sales order no is always populated..
    Regards
    Ajay M

  • IO settlement with multiple characteristics

    Hi All,
    I have a requirement that discount amount will be captured in FI books along with IO. Now i want to settle this IO to PA segment with multiple customers, Material codes, DIVision, D.c etc..
    Ex:Discount amount:10,000  and IO NO:AAAA-FI
    Need COPA: Rs1000-Customer 1, Divsion 10, DC: 10 Material code:X1  (Amount Segregation manually)
                        Rs 2000 Customer2, division 20 DC: 10 Material code X2
                        Rs 4000 Customer 3, division 30 Dc: 20 material code: x3
                        Rs 3000 Customer 4, Division 40, DC:30 Material code:x4
    How to make settlement rule  and settlement will be done on reguular basis... plz suggest

    Hi,
    You have multiple options
    1. Option 1: - Create 4 settlement rules with PSG as the Receiver and maintain the respective chars in each Der rule
    Limitation: Useful if you want to settle each month to teh same set of Chars
    2. Option 2:- Settle the IO to a CC and allocate from CC to COPA using KEU5 (Assessmen cycle)
    Benefit: You can specify a range of receivers in the assessment cycle and you can allocate based on Sales Revenue / Sales Qty etc
    This is more flexible than option 1
    3. Option 3 - Settle the IO to one PSG in COPA and do Top Down Distribution from there
    Limitation: Not so use friendly and bit complex
    My suggestion go with 1 or 2, depending on business case
    Br. Ajay M

  • Define shipping data for plants / multiple sales areas should be assigned f

    Dear All ,
    Appreciate of you helped me in this:
    I am trying to configure the intercompany STO process, when I reached the step of u201CDefine shipping data for plants u201C I found that the issuing plant is already assigned  to sales Area ( 2000 , 60 , 10 ) which represent local sales , but I need to assign the sales area ( 2001 , 60 , 10 ) which represent foreign sales.
    Both sales areas should be used because we are doing STOs with a local company here in jordan and another one in Algeria , so Is there any way to have both sales areas assigned for the same issuing plant?
    Thanks ,
    Malik

    Hi Malik,
    I am afraid this is impossible in SAP standard. For this purpose you have the BAdI ME_PROCESS_PO_CUST. The method PROCESS_ITEM of this BAdI gets one single parameter, IM_ITEM, which is the pointer to the PO item object. This object has a lot of useful methods, among them:
    - GET_SHIPPING_DATA gives you the Shipping tab of the PO item derived by SAP, among them the ship-to number
    - SET_SHIPPING_DATA allows you to amend the data on the Shipping tab
    Let your ABAPer implement the BAdI and program its method PROCESS_ITEM.
    BR
    Raf

  • Historical Reporting With Multiple Subject Areas

    Hi All,
    I am working on to decide the best way to create repository. I do have a requirement from my client that they need to see both Current and Historical Reporting via OBIEE. I am keeping Type 2 SCD. My model consists of about 30 fact tables - each of them represents a business process/event.
    Following are my options:
    1) One Subejct Area to keep current/historical reporting. Here the joins would be based on PK/FK relationships with Effective Start and Effective End dates. There is a flag in all tables to find the most updated record. Users can use the flag to find the most updated record or use Effective Start and Effective End dates to go point in time.
    2) Create two Subject Areas - Current and Historical reporting. Current one will include the flag logic to get the most updated record in RPD
    3) Create multiple Subject Areas for each Fact table and use Combining Multiple Subject Area approach to join Subject Areas. Additionally, create one Subject Area for Historical Reporting (that will have all the tables in one SA)
    I am thinking of going ahead with option 3) This will have Subject Areas for all logical facts (for Current reporting) and one Subject Area for Historical reporting.
    Is this a standard design? Any inputs?

    You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
    If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
    And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
    thanks
    Abhinav
    Oracle Business Intelligence Product Management
    BI - http://www.oracle.com/bi
    BI - http://www.oracle.com/technology/bi
    Blog - http://blogs.oracle.com/
    BI Blog - http://oraclebi.blogspot.com/

  • Problem with multiple content areas

    Hi,
    I'm stuck with following problem. I need to build the form that should contain two logical areas on the each page. Main area should handle main form content (long table) and another area containing barcodes(dynamic list that should be filled from xml). Each area must be flowed cause both table and barcodes data may be longer than their subforms.
    I've made one master page with two content areas on it.
    I've made main form page with two flowed subforms and customize their pagination so that each subform overflow be directed in corresponded content area.
    It's seems like all ok, but here's the problem:
    While the table data gets overflowed to next page, the barcodes data starts to filled ONLY when the table data ends.
    e.g. I've got 3 pages of table data first and more 2 pages of barcode data next instead of only 3 pages with all data compiled together.
    Can you help me with this issue?
    Thanks!

    Thank you for quick answer!
    sad to hear that such a logical way of solving the problem is impossible in LC..
    Maybe you can help me to find a right way?
    little more details about my issue:
    I need to manage the form so that it could include both table and barcodes(list) items (while each of them may flow onto multiple pages of the form). E.g. table lasts 4 pages and barcodes lasts only 2 pages.
    Table and barcode items are filled from xml file.
    e.g.
        123456
    I've make a sketch of desired form layout:
    http://www.ljplus.ru/img4/_/a/_a_lexx/form.gif
    Please, help me to find right way of doing this?
    Thank you!!

  • Open Customer for Multiple Sales Areas

    We need that when we save a customer from a specific sales area this customer will be opened automaticly in several sales areas and company codes (because of buisness reasons we do not use consumers).
    I was not able to find a function/BADI that gives this functionality.
    Please asssit,
    Uri Dembo

    Hello Uri
    Please correct my understanding
    What you are saying is , when you create a customer in a specific sales area, it should get extended to rest of the sales areas, is that what you are saying?
    If yes, then you might want to take help from your technical folks (Abapers) for auto extension of customer in other areas.
    Before you do that, it is essential to understand that you have the right configuration in place.
    Regards
    Kalpesh

  • When working with multiple artboards, are there separate layers panels for each artboard?

    Just started working with multiple artboards in ai but have read nothing about the layers panel, whether you use one layers panel for all the artboards or if the layers panel is duplicated so there is one for each artboard.

    I don't really understand your problem, but I've had headaches with managing a GUI before (as many programmers have, I'm sure).
    My best advice, if the scheme your using to build and manage a GUI is too confusing for you, the programmer, to easily understand/manage, change the scheme. Even if this means recoding a good deal of your program (though, hopefully, you've kept the GUI as seperate from your functional code as possible) it should be worth it.
    Perhaps a clearer explination of your problem would help better illustrate your problem?
    -Rejun

  • Multiple sales area

    hi gurus,
    Is there any Fm to assign BP to multiple sales area

    Hi,
    Use this CRM_BUPA_CONSUMER_ADD_SA to fulfill your requirement.
    Regards
    Sidd

Maybe you are looking for