DSD SPE_CNDDYP Replication error in Middleware side for DSD Project

Hello Everyone,
                        We had configured the DSD backend and DSD connector . Now we are doing configuration for the Middleware client and during the Replication of the SYNC BO ID particularly for the SYNC BO ID SPE_CNDDYP we are getting an error saying to check the log in MEREP_LOG. If we see there I see the below error log :
001       1282
          1          1 I        02/11/2008 10:07:55 Z_MEREP_GEN_T01_____SPE_CNDTYP has started for run number 0000001282 and runtime counter 1
          2          1 E        02/11/2008 10:07:55 Default value missing: Value ID=LANGKEY, depends on=1, exclusive=
          3          1 I        02/11/2008 10:07:55 Z_MEREP_GEN_T01_____SPE_CNDTYP has finished for run number 0000001282 and runtime counter 1.
I am not sure what is mean by "Default value missing: Value ID=LANGKEY, depends on=1, exclusive=
Thanks for your help in advance.
We are in ECC6.0 SP13 & MI Server 7.0
Please let me know if you have any questions.
Thanks,
Greetson Shunmugasundaram

Hi Greetson,
thisis not that difficult. You can maintain some settings while sync. These are defined in
MEREP_SBUILDER
enter the name of the syncbo nd then
open the settings -> default values menu.
You should be able to enter the correct setting there.
I am not 100% sure about the SETTINGS name, but it is in the menu bar - I think the 4th menu point.
Hope it helps!
Regards,
Oliver

Similar Messages

Error in generating SID for 0Requid (187.98)

Hi All,
We have transported requests into the Quality and when iam trying to run the infopackage for master data through flat file, it pops up this erro msg which says "Error in generating SID for 0REQUID (187.98)".
This is the case with all master data infopackages.
Also in the quality system, when i change the path for flat file assignment in infopackage and click on save, it pops up for a request. As far as i know it should not ask for a requst in Quality system
Please guide me to resolve this as soon as possible.
Regards,
Neil

0Requid :187.98
what was this request ID...
go to RSRQ and give the request ID and execute...it gives the load monitor...
chk the load to which it belongs to either master or transaction...
if it belongs to master...then try to find the object to which it was loaded...and schedule the change run for the same object....
rgds,

Replication Error: Determination of values for application was interrupted

Hello,
We are setting up a CRM 5.0 system, with an ECC 5 backend. We try to replicate the condition customizing (object DNL_CUST_CND). When I look in the object monitor the object gets status green after running. But in SLG1, the log shows over 200 warnings and 3 critical errors with message:
Determination of values for application was interrupted
Message no. CND_MAP837
There is not more information available and I can't find anything relating to this message here or in OSS. Does anyone have a clue what the cause of this error could be?
Thanks in advance,
Jeroen

Hello Jeroen ,
You may find the warning message bcos all the R/3 fields may not be available in
CRM system. thus those condtion tables may not be mapped and inactive status.Check whether the condtion tables used in ur scenario is available in active status in CRM.
Regarding the data exchange of condtion the follwing oss notes will be helpful:
1. 314542.
2. 441485 this note containst the message relevant to you (CND_MAP837) .
Please check the above notes and try to analyse ur issue.
Regards
Bala

Error in JSP's for custom project created for SAP-SHRAPP crm/isa/web/b2b

Hi All,
we have NWDS 7.3, NWDI 7.3, JDK 1.6.
Imported the track, created a new custom b2b project. Added the corresponding dependencied on the project folders.
On build of the custom project, build was finished with some warnings. The depolyment was completed successfully.
We are able to open the XCM settings of the custom project. And even the application for the custom project is running fine, ordes are being saved, without any error.
However, when i open any JSP say order.jsp. It has some set of warnings and errors. The error description says ISACORE jar file is not accessible.
Kindly help, how to solve this issue?
Thanks
Ekta
PS. example of one of the error
Access restriction: The type OrderChangeUI is not accessible due to restriction on required library D:\NWDS
\eclipse\workspace.jdi\0\DCs\sap.com\crm\isa\isacore\_comp\gen\default\public\default\lib\java
\sap.com~crm~isa~isacore~default.jar
when i go to this location the JAR file is available.

all the SC are of version 7.01
Thanks!
     ED7
o SAP_JTECHS.sca     sap.com      SAP_JTECHS      7.02 SP8 (1000.7.02.8.1.20110704191740)
o SAP_BUILDT.sca     This is DTR component it will be in NWDI(DI BUILD TOOL)
o SAP-JEE.sca     sap.com      SAP-JEE      7.02 SP8 (1000.7.02.8.1.20110705065623)
o SAP-SHRJAV.sca
     SAP SHARED JAVA COMP. 7.01//
SAP-SHRJAV      701 SP4 (1000.701.0.4.6.20110722065102)
o SAP-SHRWEB.sca
     SAP SHARED WEB COMPONENTS//
SAP-SHRWEB      701 SP4 (1000.701.0.4.6.20110722073940)
o SAP-SHRAPP.sca
     sap.com      SAP-SHRAPP      701 SP4 (1000.701.0.4.6.20110722064714)
o SAP-CRMJAV.sca
     CRM JAVA COMPONENTS 7.01//
SAP-CRMWEB      701 SP4 (1000.701.0.4.6.20110722064233)
o SAP-CRMWEB.sca
     CRM JAVA WEB COMPONENTS 7.01///
SAP-CRMWEB      701 SP4 (1000.701.0.4.6.20110722064233)
o SAP-CRMAPP.sca
                    sap.com      SAP-CRMAPP      701 SP4 (1000.701.0.4.6.20110722063254)
o SAP-CRMDIC.sca
     sap.com      SAP-CRMDIC      701 SP4 (1000.701.0.4.6.20110722063636)
o SAP-IPCMSA.sca
     CRM IPC MOBILE 7.01///
SAP-IPCMSA      701 SP4 (1000.701.0.4.6.20110722064529)
o STRUTS.sca
     This was for only CRM 5 I think you should ignore this SC    Note 917001 - XCM configuration failes on OS/400
o TEALEAF.sca     This was for only CRM 5 I think you should ignore this SC   Note 900660 - TeaLeaf RealiTea Version 4.5 for CRM 5.0

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

CRM Middleware help for rookie needed.. Replication of Business Transaction

Hi guys,
I try to set up replication of Business Transactions from R/3 to CRM and vice versa.
I have created:
- CRM site type (CRM) , R/3 type site (R46CLNT700)
then I created a subscription: SalesDocuments (R46CLNT700 is assigned to this subscription) for publication "All Business Transactions (MESG)".
a, Is this enough configuration of MW for needed replication? Or do I need more settings set up?
b, When I try to start initial load of the Replication object BUS_TRANS_MSG (which is "in" publication All Business Transactions), I am not able to start Load from CRM to R46CLNT700).. As target I can use only CDB... What is wrong?
c, If I create some sales transaction in CRM system and I want it to be replicated to R/3 and vice versa, how will I know, which replication object represents this document? For example, I create a Sales Order. How will I know, which replication object to set up for replication?
Thanx a lot! Peter

Peter,
1.If you are looking for Initial download from CRM to R/3, this should be possible from CRM v4.0.
2. Delta flow between the systems should happen once your initial download is complete.
3. Check the Inbound and Outbound queues in CRM. If they seems to be hanging for long time, check whether you have registered the Inbound & Oubtound queues in SMQR and SMQS transaction on both CRM and R/3.
Regards,
Phani.
Wipro Technologies

Smart Synch replication error

Hi all,
I am trying to set up the example application for the Contact tutorial (smart synchronization). I made all steps (SyncBO, client application), and the application runs in the Mobile Client. However, when I try to replicate data from the backend to the middleware using merep_ex_replic, I get error message: the SyncBO doesn't exist.
When I debugged the replication application I found that for S01 type SyncBO (2-way synchronization using BAPI wrappers) the replication won't work. In merep_804 table the FMCAT field is 'D', instead of 'R' and the replication program is looking for fmcat='R' type record.
Does anybody know why is this? Should I use Timed 2-way synchronization instead? (there's fmcat='R' for type). What's the difference between the 2 types?
Thanks in advance,
Pál Somogyi

Hi Pal,
well, that might be a asyn data transfer in your case.
Client Development:
You have now the auto generated code with you in NWDS. since your func modules are of said types you can do these from client side too. for these you need to write code yourself.
there is no configuration settings for code generation. the application generate gives a basic functionlity of viewing the BE data.
To create, modiy and delete you need to write your code. it is anyway there. just modify if needed.
At the bottom of the SmartSyncDBAccess file you will see code for modify and create SyncBO. remove the comments and use the code. you can call it directly in your application.
this gives you an idea. debug and change the code to suit your needs.
Hope this helps.
Divya
to understand the code better you first need to understand the SmartSync APIs.

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Replication error BP from CRM to R/3 - "Fill in all required entry Fields"

Dear Folks
I have maintained all steps mentioned in building block - C03. I have maintained separate account group approach. Made sure that number ranges are in sync in both the systems. Particularly in PIDE, mapping classification Consumer-Org 'A' to 'ZZ01' (Copy of 0001).
      I changed all required entry to optional entry in my 'ZZ01' field status using OVT0.
       But when i replicate using R3AS, i get an error 'Fill in all required entry Fields" - Error in receiving system (i.e R/3).
       I tried manually creating customer in R/3 with the account group ZZ01. Surprisingly it does not allows me to save unless i give the reconcillation account entry, even though it is not a required field.
   Please let me know for further details and Please help me to resolve this error. I am in real urgency.
Thanks
Keerthi
Chicago IL
507 401 1030

Hi Karunakaran
        Your reply answered my question of creating customer with no 'recon' a/c required entry. Thanks awarded 2 points.
          My replication error is still hanging around. I found that It has no bearing on the 'Reconcillation A/c' required entry.
          Some other field is still restricting my BP Role- Consumer:Organization to replicate. The error still showing as "required fields are not entered in R/3", even after suppressing "Reconcillation Account".
       I think my reference customer master i created in R/3 using VD07 is not assigned in case of the account group Consumer:Organization.
   But i don't know how to verify my doubts and get rid of this error.
Please help, in great urgency.

Active Directory Replication, have not been performed for a long time

Good afternoon,
Situation: in the organization with a lot of domain controllers, with one of the sites lost contact. From the period of 18.07.2014 - for the present time, the replication of the two domain controllers did not happen. Now, the connection is reestablished in
magazines replication errors occurred. Replication is performed using DFS.
errors:
The journal replication DFS:
The DFS Replication service has detected an error in the connection to the partner for replication group Domain System Volume.
For more information:
Error 1825 (Error in the security package.)
Connection ID: F29C3738-AF90-4CE8-BFC0-48C1B36A5819
The ID of the replication group: 72D953C6-FD0A-4DA0-8D91-2C0B144E45A1
In the system log:
The Kerberos client received an error from the server KRB_AP_ERR_MODIFIED SERVERNAME $. Used the final name DNS \ SERVERNAME $. This means that the target server failed to decrypt the ticket provided by the client. This may be due to the fact that the SPN
is the destination server (SPN) is registered on an account other than the account used by the ultimate service. Make sure that the final SPN is registered only on the account that is used by the server. This error may also be that the final service is using
a different password for the account of finite life that is different from the password key distribution center Kerberos (KDC) for the account of finite life. Make sure that the service on the server and the KDC are updated to use the current password. If
the server name is not fully defined, and the target domain is different from the client's domain, check for server accounts with the same name in these two domains, or use the full name to identify the server.
This error occurs when you try to access any network resource problem servers.
Storage of deleted AD objects installed by default 180 days.
Solutions found, can someone faced with similar circumstances. I would not want to lower the domain controllers on the problematic servers and deploy them again. After all objects created will be lost during this period, they are the whole domain is not much,
but they are
The result of repadmin / showrepl - this error, on all servers:
SITE \ SERVER via RPC
DSA - GUID of the object: 5f01bea8-b74b-4876-b475-be712a191431
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result -
2146893022 (0x80090322):
Principal Name is incorrect.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:41.
SITE \ SERVER via RPC
DSA - GUID of the object: 436c1016-4363-47b5-a34d-2e5b3e2b0038
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result of 5
(0x5):
Access is denied.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:42.
SITE \ SERVER via RPC
DSA - GUID of the object: b677e990-f7cb-4daf-8f87-16602bc119e0
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result -
2146893022 (0x80090322):
Principal Name is incorrect.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:43.
SITE \ SERVER via RPC
DSA - GUID of the object: 5afbb9b1-7558-4f97-b941-84e1845b48ce
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result -
2146893022 (0x80090322):
Principal Name is incorrect.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:43.
netdom resetpwd / s: NameWorkDC / ud: domain \ administrator_domen / pd: password
Failed to reset the password for the local computer account.
Login failure: The target account name is incorrect.
Failed to execute the command.
If I execute the command, and as a server pointing, use the second server of the same site (which have not replicated on the same site). The command is executed successfully.
If I specify as the /server - IP address of work DC, operating a server running KDC - the command is executed successfully.
Generally, the problem with the controller, I can not get access to any of the listed on the main market, produces an error. You might not have permission to use this resource.
BUT if we turn on the IP, - let without the need to enter login and password.
Please help, what Microsoft's recommendations in this regard. Thanks in advance.

To get a better idea of the DCs' config, let's see an unedited ipconfig /all from the DCs, please.
Is there are third party AV on the DCs?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

SEVERE: An error occured while scanning for the next trigger to fire

Hi All,
I followed below steps to configure Oracle BI publisher scheduler on oracle 10g database.
1.Log in to BI Publisher as a user with Administrator privileges and select the Admin tab.
2.Under System Maintenance, select Scheduler Configuration.
3.Enter the database connection information for the target Oracle database and user.
Database Type: 10g
Connection String: jdbc:oracle:thin://<hostname>:<port#>:<oracle SID>
Username/Password for the database user
Database Driver Class: oracle.jdbc.driver.OracleDriver
4.Click the Test Connection button to make sure the connection information is valid.
5.Click the Install Schema button to install the scheduler tables.
6.Restart the BI Publisher application.
The Schema installed successfully.
But when I am starting the weblogic server I am getting below error and BI publisher application is not getting up.
INFO: Handling 6 triggers that missed their scheduled fire-time.
23-Dec-2011 05:29:38 org.quartz.core.ErrorLogger schedulerError
SEVERE: An error occured while scanning for the next trigger to fire.
org.quartz.JobPersistenceException: Couldn't acquire next trigger: Couldn't retrieve trigger: Invalid column name [See nested exception: org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1773)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1126)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: Invalid column name
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
at oracle.jdbc.driver.OracleStatement.getColumnIndex(OracleStatement.java:3372)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:2009)
at oracle.jdbc.driver.OracleResultSet.getBinaryStream(OracleResultSet.java:668)
at org.apache.commons.dbcp.DelegatingResultSet.getBinaryStream(DelegatingResultSet.java:233)
at org.quartz.impl.jdbcjobstore.oracle.OracleDelegate.getObjectFromBlob(OracleDelegate.java:154)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectTrigger(StdJDBCDelegate.java:2382)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1115)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
23-Dec-2011 05:30:55 org.quartz.core.ErrorLogger schedulerError
The system details are as below :
BI Publisher version : 10.1.3.4
Oracle DB : 10 G
Weblogic server :10.3.2
Please suggest to resolve this issue.
Thanks,
Sachin

Hi,
This errors occurs if you have configured some schema for the scheduler and configured it on BIP, but the configured schema is no longer available.
That is why I am suggesting you to replace the current quartz.properties file with the original file that exits during installation.
Then try to start the server, and see if the server starts without error.
After that you can try to configure the scheduler from BIP console.
thanks,
sandeep

DSD SPE_CNDDYP Replication error in Middleware side for DSD Project

Similar Messages

Maybe you are looking for