Dsd tour data not shown...

Hi All,
I am working on MDSD. While polling my MI client shows a message: u201Cno Tour for deviceu201D .I have already assigned my device to a driver and a vehicle with necessary details in connector cockpit.
I have following queries for the same:
1.     Solution to this problem
2.     Where I can create the tour in the back end or its same as Visit Plan?
3.     Name of the table on middleware which shows the master data and tour data sent by the connector.
Thanks
Akhil

Hi,
well, I do not want to say NO, but.... You are not totally correct.
In MAM - when you have NO backend setup, there is not Data for MAM090 and MAM095. so if these two are empty on the device, then you see only one menu item - SETTINGS - only when there is data for MAM090 and MAM095 on the device THEN you see the rest of the menus. So I think you have no data for DSD actually? Well, I think the result is similar.
Regards,
Oliver

Similar Messages

  • Data not shown in output but was in XML(diagnostics)

    Hi Gurus,
    I have created a custom account analysis report for payables by editing the XLAAARPT.xml and XLAAAR01.rtf then saving both into a new file name. Then, i tried to run the custom report and it was completed normally but when i check for the output some data are not shown in it. I then click Diagnostics and View Xml button and found out that the missing data are present in the XML. had anyone experienced the same before? Please help!
    Thanks,
    Jayson

    Duplicate post.
    Is editing of XLAAARPT.XML allowed
    Please update the original thread instead of creating new one.
    If you are not getting any response to your original thread, please log a SR.
    Thanks,
    Hussein

  • Report Painter - data not shown at first selection

    Hello,
    we have a Report Painter report for cost centers.
    If we start the report with normal selection the values of the cost centers are not shown at the first look.
    The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
    "This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
    But there are values, but they are only shown if we switch to another cost center and then switch back.
    All rows that are selected the first time show no values, at the second time the values are there.
    Does anybody know the reason for this?
    Thank you & regards
    Britta

    Hello,
    starting the report with the selection of a cost center group.
    This group is shown on the left side, the values in sum of the right side.
    To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
    To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
    Clicking on the next cost center also the "no data" information is shown.
    Now switch back to the first cost center on the left side and then the values are shown on the right side.

  • Data not shown properly

    Data entered and loaded, but it doesn't appear in the grid or data forms. In the cell history and data audit the data is shown as entered and loaded. Do you know this phenomenon.

    I would suggest you do a Data Extract, and see if any data is extracted. What this will also show you, is the POV.
    It is not uncommon that the POV is at Entity Currency Total or similar, and as you may not have run a consolidation yet, the view feels empty. Also, set up a grid, and check the status. You should see CN flag which would indicate data has 'changed', and requires a consolidation.

  • Using SSRS Date Range- Data Not shown for date greater than by Analysis Services

    Hello Friends,
     I am using Date Range filters(Start and End Date) in my SSRS Report. The Problem is that if i am using the start date will be today, then the end date will be the future date by using Analysis Service as my Data Source, the report is not generated.
    I don't know why it happens? If I give the date range filters before the current date, then the report will shown.
    The problem is that the future date is not in my database. Could you please answer for this. I am struck in here,.
    Table contains : 1-7-14 ,
    2-7-14,
    3-7-14,
    If my Date Range will be 1st to 3 of 7th month, then the report shows the data.
    if my date starts with 1st of the 7th month and ends in the future, then the report will not shown the 2nd and 3rd records...
    Please teach me why?

    Your question should be posted to the appropriate MSDN forum.  This forum is for questions regarding Microsoft Certifications.

  • DSD menu links not shown

    Hi All
    I am trying to implement DSD. While doing so I made Enhancement MDSD project in eclipse using MDSD jar file.
    Further I deployed the jar file on webconsole and tried running it on awt MI client.
    After sync, MDSD appication link is shown but on clicking MDSD, I am not able to see the DSD menu.Screen only shows a sync button and a application button.
    Kindly help with your answers.

    Hi,
    well, I do not want to say NO, but.... You are not totally correct.
    In MAM - when you have NO backend setup, there is not Data for MAM090 and MAM095. so if these two are empty on the device, then you see only one menu item - SETTINGS - only when there is data for MAM090 and MAM095 on the device THEN you see the rest of the menus. So I think you have no data for DSD actually? Well, I think the result is similar.
    Regards,
    Oliver

  • Data not shown in smartform

    Hi All
    Firstly I'm sorry to post the question below wrong forumn, Second it is not the basic question as the General forum tell me,
    I want to print DMBTRNET,DMBTRGROS,DMBTRTDS in smart forms whereas these data calculated in SE38 as shown below,
    IF WA_BSEG-BSCHL = '31'.
       WA_BSEG1-DMBTRNET = WA_BSEG-DMBTR.
    ELSEIF WA_BSEG-BSCHL = '40'.
       WA_BSEG1-DMBTRGROS = WA_BSEG-DMBTR.
    ELSEIF WA_BSEG-BSCHL = '50'.
       WA_BSEG1-DMBTRTDS = WA_BSEG-DMBTR.
    ELSE.
       WA_BSEG1-DMBTROTHER = WA_BSEG-DMBTR.
    ENDIF.
    WA_BSEG1-BSCHL = WA_BSEG-BSCHL.
    If u identified that I m not suitable to asked any question in your forum then I am again sorry.
    Thanks And Regards
    sanjeev Goel

    Hi,
    If you are retrieving the above data in your print program (SE38), then you can use global variables and then pass those variables to smartform.
    While displaying these you will have to create text elements and pass the above variables here in text element.
    If you are not retrieving the above data in print program, then you can retrieve it in smartform as well using program lines and then pass the respective variables to respective text elements.
    Hope its clear to you.
    Thanks,
    Archana

  • Report data not shown

    I have a report that previously worked fine.  It's relatively simple tied to a stored procedure with three grouping levels and a bunch of formula fields to generate summary calculations.  I changed the datasource recently and now the report shows blank.  I can run the stored procedure with the values listed in the Show SQL dialog box and I get data.  I can refresh the report, browse data and see the data in each field that I expect to see in the report.  The display remains blank no matter what I do.  I've removed all the groups and shown just details, verified the database, changed the datasource location to a fresh data connection, nothing works.  I can create a brand new report, attach to the stored procedure, group and drop in data and it works, but my old report refuses to show data.
    I originally spent about a day creating this report so I'm hesitant to just start from scratch.  Has anyone else seen this and stumbled across a solution?

    hi,
    have u got any solution for this?
    i am also facing exactly the same issue and i have spent almost a day doing R&D on this but no result.

  • Data not  shown in my Crystal report

    Hi,
    I have created a price list using crystal reports. My database is an excel spreadsheet. Everything works excep that some codes do not show up for some reason? I have a colum that is Manyfacturer number, and certain codes that are on in my database are not reflected in my CR report?
    Can anyone help me?
    Thanks
    Vince

    Hi Vince,   Check to make sure the data is in Excel, also, if you have any joins at all, make sure they are the correct type.
    check to make sure your select statement is not filtering something,  I can give you a better answer, with a few more details.
    Say, the line the data is missing on, is the whole line missing? is it part of the detail section or a group? if you sort this
    data in excel, is there any missing data anywhere on the excel spreadsheet?   any way, for a better answer, we will need more details.

  • Hyperion Reporting Studio - data not shown in "Complete book to PDF"

    Hello All,
    We are using Version 11.1.2 with Planning and Essbase. We have created a book with 2 reports in it. When I run a report in the book to HTML I see data displayed in my statistical accounts but when I run the complete book to PDF the stat accounts are displayed as zeros. I can also retrieve the data using the Excel add-in. There are no error messages when running the book.
    Has anyone seen this previously?

    Hello All,
    We are using Version 11.1.2 with Planning and Essbase. We have created a book with 2 reports in it. When I run a report in the book to HTML I see data displayed in my statistical accounts but when I run the complete book to PDF the stat accounts are displayed as zeros. I can also retrieve the data using the Excel add-in. There are no error messages when running the book.
    Has anyone seen this previously?

  • Segment field is not shown in profit center master data

    Hi,
      When i activated New GL ,but the segment field is not shown in profit center master data. How can i make the field shown ?
    Thanks.

    After activating the New GL have you defined the segment? First define the segment under Enterprise Structure and in Fin.Acctg Global settings(New)-Legers-Display scenarios for General Ledger Accounting, you need to create new entries for FIN_PCA & FIN_SEG.
    Hope this helps you.

  • Dates are not shown correctly

    By accident I just noticed that dates are shown quite messy on my MBP with OS-X Lion 10.7.4 for some odd reason I can't find.
    It doesn't matter if I have the dates shown in their long form or short form (see screenshot). I had never seen this before, so my reckoning is that it started quite recently.
    The error is probably also responsible for some odd behaviour in certain folders. The Pictures and Download folders now have a funky top bar and I can not sort files anymore based on, for instance, dates or anything for that matter (see screenshot)
    I found that this problem  extends to MS Office 2011 for Mac as well. Notably when I tried to set my Out of Office message in Outlook. The selection box for dates translated 2012 to something like 201220. When I verified my OoO message using a windows outlook client, it turned out the date was set to the year 2020. Obviously I would not have any clue about my availability then just yet, so it's quite annoying actually.
    And not just the OoO message is impacted, also other things in Office for Mac. Check out the screenshot of a standard reminder pop up below:
    The System Preferences don't show anything odd though. Time and date is set automatically by the Apple Europe server (Apple Europa (time.euro.apple.com))
    I so hope anyone can help; thanks in advance for trying!
    Cheers,
    -Jan

    Thanks, this solved the date issue.
    However, it didn't solve the problem I experience in the Download and Pictures folder (not able to sort on collums). As it appears to be a different problem I'll start a new thread for that.
    Thanks again!!

  • SAP standard sales report not shown data

    We have following standard reports for sales. We have authorisation for these reports. But when we execute these report for 3P00 sales org., these reports will not shown any data saying that no data exist.
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis- Invoiced Sales - MC+Q
    Sales office Analysis- Invoiced Sales - MC-E
    Shipping point Analysis - MC(U
    Request you to kindly provide the solution.

    Hi,
    Have u configured Logistic information system proper - mean to say r u maintained same settings for this sales organization
    IMG >>> Logistic genral >>> LIS >>> Logistics data warehouse >>> Updating.
    R u maintained statastical group in material & customer master, check that.
    Kapil

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • Date is not shown in messages list

    For many emails that I am receiving from different accounts, date is not shown in messages list, only time.
    It looks like these messages were received today, in fact they are old.
    Encountered this problem on 2 different PCs, 3 different mail accounts (gmail and own server).
    What could be the reason and how to fix it?

    The messages shown without date are not today's, they can be few days, months or even a year old...

Maybe you are looking for