DSD vehicle data Equipment; transporation planning point

I need to update via LSMW the DSD vehicle data Equipment; transporation planning point.
Table /DSD/RP_FLTTPLST
Field TPLST
Updating via LSMW recording is possible for 3 entries; after that the recording does not reconize the next entry (entry 4 and further). I already export the LSMW to txt and manipulate the recording by filling TPLST_01, TPLST_02, TPLST_03, TPLST_04, TPLST_05 etc but no positive result.
There is no BAPI or IDOC available.
Field description for batch input:
Screen field /DSD/RP_FLTTPLST-TPLST
program name SAPMIEQ0
Screen number 0101
Any suggestion how to change this without manually actions?
Duplicate locked
Edited by: Rob Burbank on Oct 31, 2009 3:23 PM

There is no relationship between those structures....

Similar Messages

  • Fleet Management TABS (DED Vehicle Data)

    Dear All,
    I have two queries if you can help me out I am not geeting the tab DED Vehicle data
    the two tabs vicle ID Measurments and vehicle Technology these two tabs I am getting but not the third one DED Vehilce Data
    I have configured same as IDES ,In IDESthey are showing I could not make out where is is loop hole
    Please tell me
    Secondly On that DSD Vehicle data block timesstart -block time ends ,below the required Drives Licence plate field
    How can use this vehicle for booking purpose
    Like say truck today booked by X deprt ment from 9 am to 4 pm & say from 4 pm to 8 pm by Y  department
    ANY BODY has done this in sAP please have your views
    what is use of these fields in D

    Sorry
    My Question is How to use this tab page(DSD data) for booking                             
    Regards
    chandrashekhar Ingole

  • I am planning to switch to the "iPhone for Life Plan" with unlimited data.  How do i determine what the balance is on my equipment installment plan?

    I am planning to switch to the "iPhone for Life Plan" with unlimited data.  How do i determine what the balance is on my equipment installment plan?

    Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
    Thanks,
    Adrian
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • BAPI or IDOC to update Transportation Planning Point through IE02

    Hi All,
    I am looking for a BAPI or IDOC(basic Type) through which I can update Transportation planning point(TPLST) field through IE02 transaction.
    please refer table /DSD/RP_FLTTPLST for equipment number related to TPLST.
    Regards,
    Surya Kiran

    should I use BDC recording ??

  • Problems with HowTo "Creation of BI Master Data in Integrated Planning...)

    Hi,
    one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
    For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
    Does anyone of you know this guide and was able to build a working solution?
    I have different questions, maybe you could help me:
    - what kind of variable is he using?
    - do I need a DataProvider in Web Template?
    - how do I get the connection to the used variable in the button group?
    Thanks for your help.
    Regards
    Tim

    Hi Timo,
    you require two howtos to implement the solution.
    First, please take a look at the first document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
    In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
    And after this please implement the solution from the how to.
    Furthermore you can take a look at this how to, which might help you too:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
    Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
    Hope this helps.
    Regards
    Tim

  • Finding the manufacture date on an access point via software

    I'd like to determine the manufacture date of our access points because we plan on converting to LWAPP? Can someone tell me the what CLI command to use and which field has the answer. thanks.

    Hi Thomas,
    Not sure about finding the Manufacture date (maybe you are trying to find out about the presence of a MIC certificate) but we did go through this coversion from Autonomous to Lightweight on our infrastructure last summer.In this process we did convert about 70 1121's and 1231's to LWAPP and it worked very well. Here are some relevant docs;
    Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
    From this excellent doc;
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html
    The following Cisco Aironet access points have the ability to operate as autonomous access points or lightweight access points:
    Cisco Aironet 1240 AG Series Access Points
    Cisco Aironet 1230 AG Series Access Points
    Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)
    Cisco Aironet 1130 AG Series Access Points
    Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)
    Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R).
    From this doc;
    http://www.cisco.com/en/US/products/ps6521/prod_bulletin0900aecd80321a2c.html
    Guidelines and Tools for Migrating to the Cisco Unified Wireless Network
    http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd804f1a23.shtml
    Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs
    LWAPP secures the control communication between the AP and the WLC by means of a secure key distribution. The secure key distribution requires already provisioned X.509 digital certificates on both the LAP and the WLC. Factory-installed certificates are referenced with the term "MIC", which is an acronym for Manufacturing Installed Certificate. Aironet APs that shipped before July 18, 2005, do not have MICs. So these APs create an SSC when they are converted to operate in lightweight mode. Controllers are programmed to accept SSCs for the authentication of specific APs.
    http://www.cisco.com/en/US/products/ps6521/products_configuration_example09186a00806a426c.shtml
    LWAPP Upgrade Tool Troubleshoot Tips
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
    Also, 5 points for Eric! For all your great work here lately.
    Hope this helps!
    Rob

  • Finding transportation planning point in the document

    hi all,
    i want to create the shipment order for a delivery for which i need to know the *Transportation planning point and shipment type.
    i have the delivery document.
    i want to know the transportation planning point from it.
    where can i look for it.
    thanks
    Harini

    Hi there,
    You will just find transportation planning date in  delivery. Transportation planning point will be in shipment doc in VT03.
    In VT03, give the shipment num --> click on doc flow or top left hand corner icon shipments & deliveries. It will show the the num of deliveries in the hsipment of it is a collective shipment. If it is an individual shipment it will show the single delivery num.
    In the shipmnet doc you will find the transportation planning point.
    Regards,
    Sivanand

  • Vehicle type equipment created By mistake

    Hi experts,
    We are facing a problem regarding changing equipment master data view.
    Actually bymistake end user have created some vehicle type equipment instead of creating general equipment with categories M.
    And when we are viewing those equipment master data instead of object type in GENERAL TAB it  is showing the vehicle type.
    Can you suggest how we can change the master data view profile for only these perticular equipments so that view can get object type field and maintain the relavant data.
    AR
    Edited by: Amit  Rana on Feb 3, 2010 1:47 PM

    Hi experts,
    Hi have rechanged equipment categories of the equipment but i am not getting the change in tabs as i have seeing in the M Categories equiupments.Vies profile is still showing of vehicle type of equipment, Vehicle technology TAB etc.
    End users created this vehicle type through IE31 t-code, where they have selected the vehicle type.
    AR
    Edited by: Amit  Rana on Feb 3, 2010 2:34 PM
    Edited by: Amit  Rana on Feb 3, 2010 2:35 PM
    Edited by: Amit  Rana on Feb 3, 2010 2:37 PM

  • Data loading from planning forms into two different essbase application

    Hi All,
    I have 2 different planning application into 2 different planning and essbase server but the application repository for these applications is same which is lying into 3rd server. Due to this when I add the member into any application it will automatically reflect into another application because the application repository is same. When I refresh the applications the meta data is loaded into there corresponding Essbase server.
    My problem is:
    When I enter the data figure into the planning form it is going into there corresponding Essbase cube. But I want when user enter the data into 1 planning application form it should be reflected into both Essbase application , LIKE METADATA which is not happening. We are doing this for fail over support.

    Hi,
    I am sorry but that is not how I look at, the point of failure for a planning application would the web server, repository, essbase database...
    If it is the web server element then surely you would have two planning web servers pointing to one planning application and one repository.... then if one web server went down to switch to the other web server?
    You won't get a planning application to write to two seperate essbase applications, if you want failover on essbase then you will need to look at alternative methods.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Not able to Upload data in Demand Planning data view

    Hi
    I am trying to upload a csv  file in to Demand planning interactive planning through " Upload Data " functionality
    First I exported data from interactive planning , updated some data in file and again trying to upload same file.
    I am getting following error
    File cannot be uploaded
    Message no. /SAPAPO/SDP_UPLOAD009
    Diagnosis
    File  has no technical information or incorrect technical information.
    Procedure
    Save the file again locally. Make sure that the file has the technical information.
    Could u please suggest what needs to be done
    Thanks and regards,
    Nitin Lavhe

    Hello,
    For using the upload data functionality from interactive planning grid, you need to first download the data. While downloading the data, please check the check box for "Prepare the file for upload at later time", and then select the option of putting the technical setting into the file or into the system. Either way is okay. Then try uploading the same file.
    This should solve your problem.
    Thank you.
    Regards,
    Jacky Jain.
    SAP APO Architect.

  • Overwrite data in the Planning Cube

    Hi Gurus,
    I am new to BPS, I have created a simple Manual planning layout for my users
    where they could enter their plan data for either plan or forecast version.
    As you all know the cube is always additive and cannot overwrite the Keyfigures directly
    I want to know if there is any in built planning function which would do that.
    For example Right now if the users first enter like
    Plant  Profit center version QTY
    1000  2200             SP0     100
    and they think the number 100 is too much and they want to readjust it 80
    they want to enter as 1000 2200  SP0 80 but cube is additive so it is making the QTY as 180 instead of 80.
    As of now they are entering as 1000 2200 SP0 -20 to adjust it to 80 which they don't want to do
    Hope I communicated well.
    Thanks
    Jay.

    The basic functionality of manual planning is to save the data in the cube the values which we enter in the layout. If we make 100 to 80 in the layout, after saving, cube will have 80 only, not 180. Ofcourse cube is additive, in the sense, to make the 100 to 80, system generates a record of -20 in the cube so that the overall result is 80. User doesnt need to enter -20 to have 80 in the cube. Recheck once again.

  • Does exist a way to read data from IP planning cube with ABAP?

    Hello All.
    My scenario is as follows:
    I have an ODS where we store costcenters to be planned. This ODS is loaded via a manual falt file load (regular dta transfer process).  In order to avoid inconsisten data in the planning cube, I want to check in my ODS load process, if any costcenter which is already planned (it has planned data in my planning cube) is being deleted in the loaded file.
    To do this, I need to access my planning data cube ( i guess also planning buffer), so my question is if there is any function module which retrieves data from a planning level as reference data.
    Thanks a lot and best regards,
    Alfonso.

    Hi Alfonso,
    note 1101726 shows how the plan buffer can be read.
         l_r_plan_buffer = cl_rsplfa_plan_buffer=>if_rsplfa_plan_buffer~get_instance( i_infoprov ).
         l_r_plan_buffer->get_data( EXPORTING i_t_charsel = l_t_charsel       
                                              i_include_zero_records = rc_false
                                              i_r_msg = l_r_msg
                                    IMPORTING e_r_th_data  =  l_r_th_data
                                    EXCEPTIONS OTHERS  = 2 ).  
    Please take a look at the note. You do not need to implement the after_burn_selection exit, but you can find sample code how to read the planning buffer. Please give it a try.
    Another solution would be to use the function module RSDRI_INFOPROV_READ. But you need to make shure that you first close the yellow request. This can be done using function module RSAPO_SWITCH_BATCH_TO_TRANS.
    Hope this helps
    Matthias Nutt
    SAP Consulting Switzerland

  • Error in generating data source from planning area

    Hi experts! I have an error while making data source from planning area:
    after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
    Syntax error in program /sapapo/cl_im_extract_ex======cp
    the main reason: the type /BI0/9A0IVWKNDGD is unknown
    what you can suggest to solve this problem?
    Thanks.

    Dear Andrey Kudriavzev,
    The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
    Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
    Search for an OSS Note. Raise one if you cannot find the relevant notes.
    Regards,
    Naveen.

  • Error while saving data form in planning

    Hi,
    We are getting the below error while saving the data form in planning
    "There was an error during the save process"
    i believe our form is not exceeds 255 columns we were able to access the same form till yesterday
    can any one please help me on this

    One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

  • Change End date of billing plan/invoice plan in sales order item(fpla-erdat

    Hi Experts,
    Could you please help to me regarding this issue.
    I need to change  End date of billing plan/invoice plan  in sales order item  of  "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
    How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
    Thanks
    jaya

    Hi ramki,
    I tried with using  MASS  T.code ( bus2032 Object type).
    There are no field  related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
    now what i can do. or explain
    Thanks
    jaya

Maybe you are looking for