DSEE 6.2: port change and replication agreement update
I evaluate DSEE 6.2. I have created three ds instances in one host, two master and one slave. I changed the LDAP port number of my slave instance from 391 to 392 with DSCC. DSCC started to update configurations but stopped at 10 %:
Updating LDAP configuration of Directory Server
Updating Replication Agreements
10% Complete
Updating Directory Server ldap:391 LDAP configuration . . . . . Done.
Updating registration information . . . . . Done.
Updating Replication Configuration of suffix c=fi on server ldap:390:
Modifying Replication Agreement . . .
There are replication agreements between masters and both masters feed the slave.
BR,
-jukka-
Looks like you have a certificate problem:
"##[19/Dec/2007:09:27:17 -0700] - ERROR<4753> - SSL - conn=-1 op=-1 msgId=-1 - Security Initialization: Can't find certificate (ca-cert) for family cn=rsa,cn=encryption,cn=config (error -8174 - security library: bad database.)"
and until it is resolved, you wont be able to do much while in SSL mode.
Is your certificate expired? If it is, can you create a new, self-signed cert and try to run on that just to make sure it's not something else with server setup?
Similar Messages
-
My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it. My password doesn't work with the old email address. When I look for my old email address in the Apple ID support area it says that the ID doesn't exist. Help!!!
You have to go to Settings>iCloud and tap Delete Account, then sign back in with your updated credentials. This deletes the account and your synced data from your device, but not from iCloud. Provided you are signing back into the same account and not changing to a different account, your data will be synced back to your device when you sign back in.
-
Logical system changed and replication became useless
Hi all,
We have integrated sap crm 7.0 system and R/3 system. Then we have noticed that logical system is wrongly defined and we have changed it by using bdls txn. But now no data is exchanged, no data is triggered to be replicated.
In other words, integration is useless now.
What can we do in order to make integration active now?
RegardsHi.
Can you please give more details about which logical system was redefined? CRM or R/3?
Try to set SMOEAC site again and R/3 table CRMRFCPAR to get the new logical system ID.
Have you cleaned up R/3 table CRMPRLS and CRM table CRMMLSGUID before start a new intial load of any customizing object ? If no, do this and then start a new initial load of any customizing object.
Regards,
Susana Messias -
Changing of the standard port 1521 and afterward problems with Single Sign
System / Host Environment
Operating System: HP-UX 11i, Existing Oracle RDBMS Vers. 9.2 x, Listener on standard port 1521
9iAS System Architecture: 9iAS Infrastructure and Middle tier (AS Instance) on the same machine
Problem Environment:
-Before and during the installation of 9iAS infrastructure the Listener of the existing Oracle RDBMS was stopped
-The installation of 9iAS Infrastructure (db: IASDB) Version 9.0.2.0 works well
-Afterwards the port 1521 of IASDB changed to 1525. For a detail description of IASB port changing please refer to Doc. ID: 211 929.1 AFTER CHANGE 'IASDB' LISTENER PORT
-The installation of Patch Set 2 (Common Patch 2703110) follows (9iAS is now up to Release 9.0.2.2).
-The Installation of 9iAS Middle tier (AS Instance) Version 9.0.3 follows
Problem description:
-During the installation of 9iAS Middle tier problems with Single Sign On occurs.
The reason of this problems seems a communication problem between the Single Sign On login sequence and the IASDB. After a reset of the port changing (back to the standard port 1521) the installation of 9iAS Middle tier works well.
Through this incorrect and problematic behaviour we have some notes and questions:
-Well at first the description of the port changing in Doc. ID: 211 929.1 seems us incomplete. Some configuration still carry on the standard port 1521 and not the knew value of the port 1525.
-So we want to know all configuration files and parts where we have to change the port value manually ?
-What will happened to the Single Sign On function with this manually port changing. Does Single Sign On works later on correct or have we to change much more ?Currently, changing the listener port is not supported. It must stay on 1521. I believe this is to be fixed in a latter release (perhaps 9.0.4)
-
i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable
See: http://support.apple.com/kb/TS3694#USB
However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality. -
UCS F port trunking and reserved VSAN confusion
We have an existing UCS infrastructre where all the FI's FC ports are connected to the MDS9513 as one to one connection ( no port channel or trunking) and the FI is working as "end host mode" . We are planning to move some crtical production application to the UCS infrastrcture and becuse of that we would like to use the FC port chanelling and F-port trunking. While reading some documents I found that there are some restriction on UCS for VSAN numbering while using the FI for F-port trunking . As per the following doc http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0_chapter_010101.html#concept_5223F7F368524A39AB1A47B9F8BFEC8A
it says donot configure VSAN ID range from 3840 to 4079 . The MDS 9513 is running NX-OS 4.2(3) . Our existing MDS SAN infrstructure already have 2 VSANs with ID number 4000 and 4001 ( Both of these VSANS are usied for some storage replication unrelated to UCS). In the UCS we alreay have 2 VSANS' ( 200 and 201) and are planning to create 2 more ( 300 and 301). My question is if I configure the FI's for F-port truncking/FC port channeling then what will happen to my existing VSAN 4000 and 4001 on the MDS9513 SAN
Thanks
RKIf you are asking how long it will take to enable f-port trunk and how disruptive it will be? It's not lengthy, but, it will cause the link to stop passing traffic and cause SCSI retrys. Your server will know it happened. If your fc multipathing is operating properly there will be no outage.If there are any configuration issues, the link may be down for an extended period, further compounding this disruption in traffic.
You initially asked about two features, f-port trunk and f-port channel. These are seperate features and require different configuration changes. It's best to add one feature at a time, not both in the same configuration change. Each change will be disruptive.
Do one fabric at a time. Ensure the f-port trunk is fully functional before doing the f-port channel, making sure it is functional before starting work on the second fabric.If your multipathing is operating as it should, there will be no outage. If there is any doubt schedule an outage window.
Dave -
DSCC- DirectoryServers- Servers displaying replication agreements?
Hello Folks -
When working through DS 6.x I noticed that sometimes the creation of a replication agreement will result in that agreement being displayed under the Servers tab within the DSCC. It will not happen for all agreements. When logging into DSCC - there are numerous searches which take place against the all registered instances - I assume to get some data to display. The searches for the replication agreements take place on all hosts - so why only some are displayed is odd. Any help would be appriciated.
Thanks
Randy
Example:
All JES Installs
Host 1: DS 6.3
Host 2: DS 6.0
ADS exists on Host 1 - both instances registered.
SSL agreement from Host1 -> Host2 = not displayed
SSL agreement from Host2 -> Host1 = dispalyed in DSCC Servers tab
Example of display:
HOST1:HOST1_SSL_PORT -secure port- (server not registered) and no instance path is displayedOk - this has been resolved. The issue was - when HOST1 was registered locally to the ADS it was with the command 'dsccreg add-server $instance_path'. The name of the host was then taken from the local machine (from /etc/nodename?) and was not the FQDN. Then the replication agreement was created from HOST2 -> HOST1 and the FQDN was used. The DSCC was not able to match the host names and considered the replication agreement a new host which was not registered. The resolution was to either create the replication agreement with the same value which was stored during registration - or better yet - register the local host again with the FQDN.
-
Replication agreement configure via DSCC
Hi
I have problem on config replication agreement. I want to make replication between 2 masters which installed on different physical machines. But they cannot find out with each ohter Or how to add remote servers on server list, I even tried to do register server but failed.
Thank you.Can you check if cacao is running?
/opt/dsee/dsee6/cacao_2/usr/sbin/cacaoadm status
If not running, start it:
/opt/dsee/dsee6/cacao_2/usr/sbin/cacaoadm start
If this did not help, please explain: "But they cannot find out with each ohter Or how to add remote servers on server list, I even tried to do register server but failed."
What steps did do follow to register a server andwhat error did you see? Post error and access log snippets -
I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
Database Mirroring and Replication in SQL Server 2008 R2
I have configured the mirroring and replication between 4 servers (A,B,C,D).i.e, Mirroring between A to B and C to D, Replication between A and C. The configuration was a success and I am able test the replication(B to C) when I have failed over the mirroring
dbs(A to B). The replication works fine after the mirroring fail over but I am not able to check its status in the Replication monitor. When I am having any insert in a table which is replicated in B, it is reflected back to C..it means the replication is
working fine.
Any thought on how I can view the status of replication from mirrored server. I tried adding the publisher in the monitor, but no luck. If I check the snapshot agent status, it says could not retrieve the info, same with the log reader agent status.
Any suggestions on this please.
Thanks, SiriFor example in your case...
Server A is principal and Server B is Mirror with either Manual or Automatic Failover.
Server A is replicated to Server B ( publisher & B is subscriber )
In Server A Database named Test_Mirror_Replication is configured for both mirroring and Replication.
Now you have failed over your Database 'Test_Mirror_Replication' from Server A to Server B.
After the Failover Server A will act as Mirror for DB 'Test_Mirror_Replication' & Server B will act as Principal for DB 'Test_Mirror_Replication'
Hope my understanding is correct ?
If yes then have you tried monitoring the replication after registering in other instance with current principal database sql instance name ? I mean current Publisher database name sql instance ? not your old sql instance name which was before the mirroring
role change or failover...
Hope you are trying with mirror database server name ?
Raju Rasagounder MSSQL DBA -
Only Remote-Desktop and Replication with 0.0 Reduction
Hi guys,
I have a solution with 16 WAAS 4.4.3 and I got good numbers in all default applications except Remote-Desktop and Replication
( All Traffic 53% of Reduction).
I can understand not otimize Remote-Desktop Applications cause the customer is using Metaframe with crypto and already compacted and
using too RDP with crypto/compacted.
But in the Replication I would expect some gain in Active Directory and MS-FRS Replication.
I got 0.0, Actually, the optmized traffic is biggest that the Original Traffic.
I have to modify something in the Microsoft servers to be able to got reduction in Replication Application ??
I'm using all the Default Classifiers in Replication Application
Double-Take LZ+TFO+DRE 1100, 1105
EMC-Celerra-Replicator LZ+TFO+DRE 8888
MS-AD-Replication1 LZ+TFO+DRE UUID:e3514235-4b06-11d1-ab04-00c04fc2dcd2
ms-content-repl-srv TFO 507, 560
MS-FRS1 LZ+TFO+DRE UUID:f5cc59b4-4264-101a-8c59-08002b2f8426
netapp-snapmirror LZ+TFO+DRE 10565-10569
pcsync-http LZ+TFO+DRE 8444
pcsync-https TFO 8443
rrac TFO 5678
Rsync LZ+TFO+DRE 873
Thanks a Lot
My Best Regards,
Andre LomonacoAs you said, you need to only send the changes over the line.
Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
It might be worth looking at the source for VNC, and other simler products.
The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method. -
I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]
Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527 -
How to change the scheduling agreement type
Dear experts
By mistake i created wrong sched agreement type in va31, is there any possibilityto change the sched agreement type?
Regards
RajakarthikDear RajaKarthik.
As per my concern why dont you delet the scheduling agreement and creat new one.
i think it will help you.
jeevan. -
Terms of payment in PO and Schedule agreement
Dear Gurus,
Is there any standard setting to update terms of payment without changing the PO and schedule agreement manually. My client wants that they will update terms of payment in vendor master at the first time and create 1 purchase order for the particular vendor.
Later they will change the terms of payment in vendor master and the same has to picked up in PO automatically without changing the PO.
Please let me know if there is any standard settings available or any user exit i have to apply.
Regards,
mohdsamsHi,
If you have multiple payment term in one vendor then you can not put payment terms in vendor master.
You put payment terms in at the time of P.O.
Regards,
Spradip -
I started a support case with Microsoft to help me with raising the our domain Forest level because i received a message stating that there were Windows 2000 PDC still listed in the database. These PDCs were removed years ago. The tech saw all of the problems
i was having with domain replication so that is where he started. running the MS PortQryUI shows that ports 3268 and 3269 are not listening, (TCP port 3268 (unknown service): NOT LISTENING) when run FROM a Child domain controller against the Parent
Domain controller. Between the 2 Child domain controllers these ports are listening.
The Windows firewall is not running on any of the controllers, i removed a virus protect client from all of the servers, although i didn't enable the firewall there either, but these ports are still not listening on the Parent DC.
I need help debugging this. I am not very familiar with network sniffers so if i need to run one i'll need some guidance. This DC only has one NIC, all IP addresses are static, all servers are setup like this. All servers are in the same subnet, on the same
lan, on the same cisco switch, there shouldn't be anything blocking this port from starting.
I looked over other post that show this same problem, but they don't give a solution. If i am not using the Windows firewall why wouldn't these ports be open?
Any ideas? web searches are all over the map on trying to find the reason for this.
BobbyTry running the below command on the DCs that you think have the ports blocked or all the DCs.
netdiag /test:ipsec /debug > c:\dcname-ipseclog.log
Open that from the C drive and see if there is anything saying block or filters.
Also, just for kicks have you disabled the firewall service on the DCs?
And just for kicks have you tried enabling firewalls ports on all the DCs? The KB is below
http://support.microsoft.com/kb/555381/en-us
Step 1 - netdiag results
Step 2 - disable the firewall service on all DCs if step 1 was negative
Step 3 - enable the firewalls on all DCs per KB 555381 if step 2 doesn't work
Let us know how it goes!
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection
Maybe you are looking for
-
I thought setting up my work email on my iPhone would be a wonderful help in making after-hours labor easier...I had no idea how much I would be blending my business and personal life. I didn't know it would set Outlook as the default account for new
-
How do I rotate a text box?
-
Hi, I have a requirement. i have a prompt with countries. after opening prompt there will be 100s of countries. for example three country names starting with letter I (India,Iran,Indonesia). If the user presses I in keyboard the pointer in prompt sho
-
Sharing Video - BBM or Text must be addressed
Long time user. Very happy with the new phone and software. I would like to make a suggestion. As a loyal BB user and fan, I get frustrated when another device can do something my BB cannot....something that makes sense and is needed (I don't care
-
Re: Help please!! ipad do not rings when someone...
How to set the notification is the way to go, but this does not work on my ipad 3thd generation with ios 10.1.2. I did go to apple and everything is set correctly and skype does not make the ipad ring. So the problem is with Skype and Microsoft. So t