DSL and 9.1 to 9.2 upgrade problems? Please Help!!
I have a Beige g3 - 300 w/ 160 megs of memory - using Netscape 7.02 and occasionally Gatesmess IE-5. I have had dial up for 5 years and recently upgraded to DSL w/ Linksys WRT54G router connected via ethernet cable. Wifes HP laptop uses the wireless.
Problem is when connected to the internet, I get a looong -(30 - 40 second) delay between selecting the url and the page loading with a "resolving host" message at the bottom of the page. The modem send light flashes every five seconds or so and once the system locks on the url it loads really fast. With the dialup there was no delay in finding the url but took a long time to load. Result is it takes about the same amount of time to browse now as before. I don't think the winbox is having the same problem.
To try to resolve the "resolving host" issue I have been trying to upgrade from 9.1 to 9.2. When I download the package from apple.com at the end I get a 127 error which reestablishes itself everytime I click OK til I force quit the System. When I restart the computer, the file is on desktop OS 9.2 update.smi. First I opened the file w/ stuffit 5.2 and tried to install it following the instructions (sharing off, OS 9 extensions only etc) and about 4 minutes into the process I get the Bomb error 10. I have downloaded this three times and upgraded the Stuffit to 7.03 but am having the same problem. In order to get to 9.2.2 you have to upgrade to 9.2.1 first and that is what I am doing.
Anybody have any ideas either on the "resolving host" issue or the upgrade problem.
Thanks in advance,
Beige g3 - 300mghz 160 meg memory Mac OS 9.1.x
Thanks Grant.
I read the article and it was of some help. Reference TCP/IP control panel settings. I called Commspeed support and they gave me their three current DNS numbers. I typed them per article and nothing - dead. Called them back and they gave me the typical winbox answers "No hable apple" so left to my own devices and considering the stratigies suggested in the article I did two things.
I opened the TCP/IP control panel and deleted the Name Server Address - As they are supposed to be assigned by the server. There was also a check box that said use 802.3 which was checked. I unchecked it and tried the internet. Blam it was right there. I don't know which stratigy worked as I did them simultaneously.
Still don't know about upgrading to 9.2.
Thanks again,
Bill
Beige g3 - 300mghz 160 meg memory Mac OS 9.1.x
Similar Messages
-
I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT
If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699 -
My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Hi All,
I have updated the Macbook Pro from 10.7.5 to 10.9.1 today and once it is done I restarted the system and it keeps on crashing/restarting the system every 2 min.
I have found the below backtrace. Please help me fix this issue.
Anonymous UUID:
C72C8841-51A0-BB21-689C-2AB204820087
Mon Dec 30 23:57:23 2013
panic(cpu 0 caller 0xffffff801da5260f): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 0), Frame : Return Address
0xffffff8096bf3690 : 0xffffff801da22f69
0xffffff8096bf3710 : 0xffffff801da5260f
0xffffff8096bf3770 : 0xffffff801da51d09
0xffffff8096bf3870 : 0xffffff801da2aa2f
0xffffff8096bf38a0 : 0xffffff801dde080d
0xffffff8096bf38e0 : 0xffffff7f9fcada11
0xffffff8096bf3930 : 0xffffff7f9fcae16e
0xffffff8096bf39a0 : 0xffffff7f9fcae523
0xffffff8096bf39d0 : 0xffffff801dc13438
0xffffff8096bf3a00 : 0xffffff801dd83378
0xffffff8096bf3a70 : 0xffffff801dbfd1ae
0xffffff8096bf3ae0 : 0xffffff801dbf437a
0xffffff8096bf3b80 : 0xffffff801dbe5f15
0xffffff8096bf3c30 : 0xffffff801dbe67d2
0xffffff8096bf3f50 : 0xffffff801de3de23
0xffffff8096bf3fb0 : 0xffffff801daf3e06
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-328 6-B827-66DB3FE3DB7B]@0xffffff7f9fcac000->0xffffff7f9fcaffff
BSD process name corresponding to current thread: applet
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 172506613860
last loaded kext at 107245362778: com.trendmicro.kext.KERedirect 1.0.0 (addr 0xffffff7f9ff33000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.logmein.driver.LogMeInSoundDriver 1.0.0
org.virtualbox.kext.VBoxUSB 3.2.6
org.virtualbox.kext.VBoxDrv 3.2.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Please help me fix this issue.
Thank you,
NishanthPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.There is no physical damage to my iPad and is in perfect good condition. I updated the latest OS 8.3 version 3 days before this issue happened. I took it to the apple authorised service centre but to my shock they told the display and unit has to be replaced which will cost me Rs.15000/-. It's just been one year and 7 days only since i bought my iPad,i.e, just 7 days out of warranty period only.I don't find any fault with the hardware neither no physical damage is there. Need help to sort out this issue.
My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.There is no physical damage to my iPad and is in perfect good condition. I updated the latest OS 8.3 version 3 days before this issue happened. I took it to the apple authorised service centre but to my shock they told the display and unit has to be replaced which will cost me Rs.15000/-. It's just been one year and 7 days only since i bought my iPad,i.e, just 7 days out of warranty period only.I don't find any fault with the hardware neither no physical damage is there. Need help to sort out this issue.
-
WINDOWS 7 UPGRADE PROBLEM, PLEASE HELP
Hi, I am in Australia, and have a 64-bit HP DV7. I filled out the application form to upgrade but when I put the model number in, it automatically chose wiindow home premium 32-bit - the problem is, it is greyed out and won't let me change it to 64-bit...I can't place the order as it's wrong for my operating system. Any help/ideas would be greatly appreciated. Many thanks
This question was solved.
View Solution.Hey there! I would contact HP Support directly regarding this. They may be able to get you the correct version.
*Remember to mark your questions solved and click the "Kudos" star to show your thanks! -
Selection Box and some repeats in drop down menu problems, please help
Hello,
I'm not quite sure what i have managed to turn on but everytime i click anything on my mac it gets a black box around it... I have no idea how to turn it off... can someone help me?
Also my restart, Log out and Shut down seem to be repeating themselves in my apple drop down menu... is the normal? I don't remember it before. I'm working on a Mac Pro using Mac OS X 10.4.7.
Any help would be much appreciated.Ahh thank you so much!
I don't know how I managed it but it was really annoying me and now its gone. Wonderful.
Thank you again. -
8meg to 20meg upgrade problem - Please help!
Hey guys and girls, after about 5 days on the phone to BT and having been given incorrect information (you cant get 20meg bla bla) I finally told them just to process it, and here I am.
The Downstream has worked a treat, but the upstream is stuck on 440kb/sec, and it should be almost double that.
The 2 questions I have are:
1.) Is it possible to change the upload speed to what it should be?
2.) Is it possible to reset, or increase the IP profile - im sure with the stats I have, my connections should be capable of connecting at 16,000 / 18,000kb/sec ?
Only reason I say that is because a relative of mine had attenuation of 27db, and noise of 8.1, and he connects alot faster.
Im guessing my rather large upstream noise level is due to the fact its only synced at 440?
I accidentally hit reset when I moved the router! (silly place to put button!)
Line state Connected
Connection time 0 days, 1:27:52
Downstream 14,604 Kbps
Upstream 440 Kbps
ADSL settingsVPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.5
Latency type Interleaved
Noise margin (Down/Up) 5.9 dB / 28.4 dB
Line attenuation (Down/Up) 24.0 dB / 12.0 dB
Output power (Down/Up) 0.0 dBm / 12.7 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 3923 / 4294967264
CRC Errors (Down/Up) 0 / 2147480000
HEC Errors (Down/Up) nil / 0
Error Seconds (Local) 0
Thanks in advance for the help!
*Quick edit* IP profile is set to 12000 at the moment, which is a pain because my sync speed is only slightly under 13000! No idea why the test is saying it cant do the upload test - worked fine earlier and got 368kb/sec*Brilliant
I suddenly really like this forum!
Also, one last question.
I noticed this morning that when I woke up (after the router had done its reset) it was all fine, and it had synced etc etc, but data tramsmitted / received was all 0 - and I could not access the internet (all router settings were saying it was connected and working fine) So I had to reset it - been fine since (until I moved it and hit reset again - oops)
When I accidentally hit the reset button earlier it done the same thing, so what I done this time was go into the router settings, and disable, and then enable the internet - and it worked again.
Don't get me wrong, im not turning it on and off on and off - I am aware that its not good for your connection.
As long as its normal - I can live with it for 10 days!
Thanks again -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.
Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps -
am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.
iOS 4.2.1 is the latest version of iOS for the 3G.
Facebook and Whatsapp both require 4.3 or higher.
If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device. -
I am using i phone 3GS and just upgraded it to ios 6 and it is not reading my sim..please help!!!!
It's maybe because your iphone was jailbroken or hacked?
-
Since upgrading to the latest version, I am unable to listen to XM radio on-line and unable to remote connect to work. Please help.
Hi
Are you still facing the same error ? If yes, are you getting this error everytime you are trying to export ?
Please try again and check.
This is basically a compilation error , where files are not converted into proper format correctly.
Thanks,
Sanjit -
i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
How do I put my iPhone stored items into my iCloud storage?i have bought an upgrade but none of my phones stored items have moved to iCloud.i can't download new update from apple. due to not enough and yet iCloud space is empty??please help I don't know what I doing all I know is my phone is iPhone 4 and I can't update it. My phone on contract with t-mobile . Thanks
You can't have content in iCloud without having it on your phone, you will need to look at deleting items from your device that you don't need. Movies and TV shows from iTunes are possibly a good start because they tend to be large and can be redownloaded at a later date.
Maybe you are looking for
-
On Windows 7 HttpURLConnection.openConnection() throws IOException
Hi Team, In our application we have a to create httpURLCOnnection (url.openConnection())which works fine on Windows XP but throws IOException on Windows7. Does anybody know which settings need to be enabled on windows 7 to resolve this issue? Any res
-
I would like to sync the contents of my new mac-mini to my macbook pro. How can I do this "on the cheap"? I see the migration tool doesnt do that... thanks so much... Steve PS-The min is OS 10.5x the Macbook is OS 10.4.11
-
Hi All, First question When I do some minor modification in tnsnames.ora. Do I Need to stop and start listener again. Second question And If I want to stop and start listener Do I need to stop all the databases before I can stop and start listener ?
-
Citrix getting port in use message.
I am getting message when trying to connect to citrix. It says port 999 already in use. How can I tell what ports are in use?
-
Windows 8 won't find any airport after resuming from standby
Hi, I have had a windows 7 PC with both airport express (2nd and 3rd generation) working flawlessly. I bought a new Windows 8 Laptop. Initially everything worked fine, but after resuming from standby mode (closed the display and reopened) my itunes s