DSL/ Col Adj/ B&W section missing in Develop module

Hi there,
I'm probably being an idiot here (usually the case) but I seem to have lost the DSL/ Col Adj/ B&W section down the right hand side in the develop module. Running top to bottom I have:
Basic
Tone Curve
Split Toning
Detail
Lens Corrections
Effects
Camera Callibration
I've definitely used it before but it just seems to have vanished! Is there an option I've turned off in one of the menus?
Any help greatly appreciated!
Many thanks!

Hey presto!
Thanks Rikk, that's done the trick! I'm just getting to grips with Lightroom and am following all the various instruction videos... just couldn't find one that solved that problem!
Thanks so much for your help.

Similar Messages

  • Lens correction feature completely missing from Develop Module

    The lens correction feature has gone missing from the Development Module.  It was missing before I upgraded to 5.6 and is still missing.  Previously, it was present, so I am wondering if I did anything to hide or remove it?

    Right-click on one of the other section headings, such as Tone Curve, Basic, etc. Make sure there is a checkmark in lens corrections. This is how you control which develop features you want displayed on your system. Sometimes features disappear mysteriously.

  • The "basic" section of the develop module suddenly disappeared, how do I get it back

    I was in the develop module, click to move down to the detail section when the app flashed and the "basic" section was gone.  I have no idea what I clicked and am not able to establish the "basic" section.  Any ideas?

    Right mouse click on any of the right side panel headers. A context menu should appear and you should see Basic listed at top. Click on same to make Basic panel visible again. It would also be worth checking to see if Solo mode is activated in same context menu. If it is then I suggest you deactivate it.

  • All panels are missing from development module

    Can anyone help me.  I have been using lightroom for some time.  Then today for some reason, not only did my basic panel disappear but also every other panel under the development module disappeared so I can't even right click on on say, the "Tone Curve" or "Lens Correction" to bring back the basic panel because every panel is missing.  Can anyone help me?  I have uninstalled lightroom and re-installed but still nothing.  I have no idea how to fix this issue.

    In develop, press Ctrl+1 (Cmd+1 on Mac) for the basic panel. Then right-click (control+click) to choose others.
    Or use the Window menu.

  • Basic settings tab missing from Develop module

    I recently bought lightroom 4 after using the free 30 day trial, and i have no basic settings on my mac, can't find them anywhere? My tabs go from histogram to colour curve. Where are they?
    Very confused..
    Message title was edited by: Brett N

    No need to be confused, you've probably inadvertently hidden it. The thing is that in every Module, all the individual panels in each of the left and right-hand columns can be optionally shown or hidden under user control (there are few minor exceptions such as the Navigator, but by and large this control is available throughtout Lightroom).
    So to bring up the options for each column (in your case the right-hand column of the Develop Module), simply right-click (ctrl-click on Mac) on ANY of the headers that are showing in that column and you'll see a pop-up context menu like the attached screenshot. Here you can see that I've previously hidden the Basic panel, so all I need to do is click on the Basic line and it's restored. Conversely, I can use this method to hide a panel.

  • Lightroom 5: Basic panel missing in Develop module

    I have installed lightroom 5 (upgrade from lightroom 3) on my MacBookPro. Everything seems to work perfectly, except that "Basic" in the Development model does no longer appear in Lightroom 5. I believe that "Basic" was there in the first place. Can anyone help me to get it back. I have reinstalled the upgrade version of Lightroom 5, but this does not help.
    Soeren

    One of the most frequently asked questions on this forum lately.
    See http://forums.adobe.com/message/5487260

  • Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

    How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

    Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

  • Preset panel in develop module is missing

    I have lightroom 2.2. Somehow, I accidently removed the preset panel from the develop module and I can't figure out how to restore it. Any help would be greatly appreciated.

    Right-click or Ctrl-click on the Snapshots or History panel and another box will open. Presets (in your case) should be unchecked. Click on Presets and the section will reappear.
    Dave Huss
    Adobe Photoshop Lightroom 2: A Digital Photographer's Guide

  • ABAP program missing in development system

    Hi,
    An ABAP Program is missing in development system. But is available in Quality and production system.
    Not sure if it is deleted from development system. Can anyone please tell me what are the ways to find the missing/deleted program. How to find if it is missing or deleted?
    Thank you.

    Hi,
    If it is developed and deleted then you can create the report with the same name which you looking for.
    Then from the Version Management you get the latest version which was transported from the Development.
    Even after deleting the report from the development the versions are still exits in the system. If you have create the report with same name then you find the version in the version management then it is deleted in the development.

  • Missing controls in Develop module - crop etc

    They were there a couple of days ago but for the last few sessions the group of controls (including crop etc) that sit under the main image in the Develop module have gone missing.
    I've been playing with the 'view' options without success and it seems that they are not coming back of their own volition.
    Any help appreciated.
    Thanks
    Scott Hortop

    Thanks - I tried options on the view menu but missed the obvious one at the top.

  • Quick Develop Module Missing in LR5?

    Hello,
    I am using LR5 and my Quick Develop Module is missing. My photos are online and so this is not the problem. I rebooted but still no Quick Develop Module. I can use the other modules. Please help?

    Quick Develop is in the Library Module, not the Develop Module (where it has always been).
    If you don't see it in the Library Module, then you need to right-click on any right-panel header (like Keyword List) and select Quick Develop

  • [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

    When upgrading linux-lts, mkinitcpio spat out the following errors:
    ==> WARNING: Possibly missing firmware for module: bfa
    ==> WARNING: Possibly missing firmware for module: aic94xx
    Is this expected? When it says "possibly", does it mean it might not be missing? Or that it might not be needed? Or just that something is wrong?
    When I searched, I came up with 3 threads. Two were from months ago and the other was about using Unity on Arch which I am definitely not doing.
    I noticed mkinitcpio was upgraded yesterday or the day before so I'm not sure if this is related to that upgrade or the upgrade of the LTS kernel or the combination.
    EDIT: and then my temperature went through the roof for no apparent reason. (Probably unconnected to the update but still.) Restarting seems to have fixed it, though...
    Last edited by cfr (2013-05-09 01:12:55)

    I got the same warnings when I upgraded to kernel 3.9 (non-lts).  It only showed on the fallback image and not the regular one though.  I don't use those two modules so I ignored the warnings.  The fallback image contains a bunch of modules you'll probably never use while the regular image autodetects what it needs and gives a much more slimmed down image.
    I could be wrong about that but that's how I understood it.
    I'm not sure why it's giving those warnings (I've never seen it before kernel 3.9) but recheck the log:  It's probably only on your fallback image and you're probably not using those two modules anyway so I'm guessing only a small percentage of users will be affected by this.

  • Why is the "basic" edit option missing from the develop module?

    why is the "basic" edit option missing from the develop module?

    http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

  • Image Ultra - cannot build W510 with new image - stops on missing Operating System Modules

    Hi folks,
    I am trying to build a new image for a Thinkpad W510 using ImageUltra 4(and now 5). I cannot get it to build unless I use the Network Install. If I use the boot disk, and select the Install and Setup option, it prepares the disk, and service partition and copies the modules to it. It then restarts, and instead of commencing the OS installation, boots to the ImageUltra Builder screen showing options to boot to another drive, go into the bios or start the browser.
    If I clik in the ImageUltra link, it brings up an Image Ultra Map menu viewer dialog to tell me that a module is missing. This module is the Windows XP Primary Partition moule.
    In desperation, I have upgraded to Version 5, and replaced the IUB4 modules with the corresponding version 5 ones. Still the same problem.
    As I said, I can use the network install, so it looks like it cannot see the service partition.
    I have the disk set to compatibility and not AHCI.
    Any help would be gratefully appreciated.

    Hi,
    I have seen, this same situation in the past with the T400 systems.
    My problem was caused by the fact, that I placed XP Partitioning module into the wrong order.
    From your description I assume, you want to deploy XP on the system.
    So in this case make sure, that following in kept:
    - you have configred the service partition to resize on the BACK  (NOT on the front)
    - make sure, that you define the service partition size to be dynamic (if it's too small, then tat would explain your situation)
    Right now you are thinking on the same stuff as I do: "This all is correct, because it works using the network deployment ... "
    Please understand, that the logic, when you are using CD deployment and Network deployment is a bit different.
    Have you tried to use the deployment using a USB key?
    I would also advice (as a debuging start) to remove EVERY module except following modules from your Base Map:
    - XP Partitioning module
    - Customization module
    - Unattend .txt module
    - OS main module
    This will only show, if it might not be possible, that some other module is not intergerring with your image deployment.
    NOTE: for this test deployment exclude the driver map.
    In case none of the above will work, then please describe a bit more your Base Map (what all does it contains and how the service aprtition is set + what about the cleanup option,.... )
    NOTE2: please in case you have the AHCI driver contained in the installation, then set also the SATA configuration in BIOS to AHCI when deploying.
    Cheers

  • How do I restore section of the tools menu in the develop module?

    I seem to have lost the basic section in the tools menu of the develop module of Lightroom 5.7 (latest download).  How do I restore it?

    Right click any of the Develop tabs and ensure Basic is checked. (Note this is for Windows; not sure how it's done on Mac.)

Maybe you are looking for