DSL (Dysfunctional Service LIne) - Service is Intermittent or Non-existent in the evening

We have had DSL for a few years.  When we first signed up, the service was quite reliable.  We started having problems with drops a few months ago.  As we were about to look into other possibilities, service got better for a while.  It is currently worse than ever.  Service drops out at least once or twice an hour and usually much more often during the evening hours.  Sometimes it drops out three for four times in a fifteen minute time period.  This is horrible service.  We are obviously looking into some other type of service.  However, due to our rural location, we do have only one or two alternatives.  
Any suggestions would be appreciated.  I gather from reading the forums that we are not alone.  This seems to be a widespread problem.  It seems that Verizon needs to address this issue or Verizon customers need to start a mass exodus from the service.  Maybe the exodus is a bad idea as it would make the remaining customers think that Verizon was improving access which it clearly is not.
The problem is not in our computers, phone lines, or routers.  The problem is in Verizon's service.  C'mon Verizon - get it together.

If your only choice for Wireline that is economical is DSL, let's absolutely aim to get the DSL fixed up. Unless your area has a good WISP chances are you'll be asking for pain and suffering dealing with Wireless or Satellite solutions (not literally, but literally).
To start, let's see what we can do to determine where the drop-outs are coming from. If you could, please post up your modem's Transceiver Statistics. If you don't know how to get this information just let us know so we can help. In addition, is each drop-out accompanied with a change in your connection speeed, or does the occurrence of disconnects vary with how congested or used DSL is (basically, how slow it goes during evening hours)?
If you have Telephone service with Verizon, not Verizon Wireless or another wireless or VoIP carrier, do you hear static, buzzing, or humming on your line during calls during the times the DSL is prone to dropping out or does the line sound clear when you kill the dial tone?
This information should give us some ground to start on.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

  • Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

    When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

    Hi,
    Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
    the service configuration and the account configuration for Windows Installer service.
    Besides, the following two threads focus on the similar issue and can be referred to as reference.
    Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
    http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
    Service fails to start, error 1297 and 7000
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
    Hope it helps.
    Best regards,
    Frank Shen

  • Service GOA  -Service line item in R/3 hasn't updated the gross price

    Hi all
    I am new to SRM system,i had got a query in Service GOA.
    Serice GOA created in SRM 5.0 and moved to R/3 4.7
    In R/3 ME33K/32K, select the line item and goto 
    Item-->services,here service masters are maintained.
    Here i want to know how the gross price is populated.I am not sure whether will it pick up automatically or it has to be maintained manually in srm,so that it is creating a condition record on moving to R/3
    In my case if i maintain 3 services,for one of the services gross price is 0
    In the same screen i see conditions link at the bottom,on clicking it takes me to condition record screen which shows condition type PRS.this was maintained for package number and line item,maintained by RFC(automatic)
    how this PRS is maintained?
    I also see in SPRO the shema is maintained for NB(PR and PO)
    Can any one help me out in understanding this functinality.
    Thanks in advance
    Regards
    Ratha

    Hi Yann
    Thanks for your reply. I am using 4.5b. I am able to create a service PO manually in R/3 with reference to the service PR created by EBP. Also, I think this issue is very close to SAP Note 509059 but it is for EBP Release 3 & 3.5 & I am unable to find the simillar note for EBP2. Please let me know how to proceed further...
    Thanks & Regards
    Raghu

  • BAPI_PO_CREATE1-No account assignment exists for service line 0000000000

    Hi guys
    I'm trying to use the above BAPI to create purchase orders from legacy system. I have populated ALL of the required tables (including the Xs) but I was returned the above error: No account assignment exists for service line 0000000000.
    I have populated fields in the POLIMITS structure 
    POLIMITS-PCKG_NO
    POLIMITS-LIMIT
    POLIMITS-EXP_VALUE.
    Any solutions?
    Thanks in advance.
    Cheers!

    hi Dinesh,
    am also having same error for bap po create1 . did it get resolved for you? please help its urgently needed for me here

  • Function module for reading service line items of a po

    function module for reading service line items of a po.............I want to read data from eslh and esll tables to getthe service line details.....
    My requirement is if the item category is 9 I need to print the service line items. So I wan to read the data of service line items from a function module. I am not able to find a fm which fetches both elsh and esll data...

    Hi oskchaitanya ,
    use bapi BAPI_PO_GETDETAIL1.
    Regards
    REA

  • Mvt. 101 with ML81N for service entry sheet split for every service line

    Dear guru.
    I have one purchase order position for service (item category D)  with three different service line.
    I run ML81N and i create the service entry sheet for every service line.
    If I see the goods receipts movement generate , the system show 1 movement line with qty 1 and the total of amount in LC of the 3 service line.
    Does exist a chance in order that system create 3 different movement lines for every service line with quantity and amount specific.
    Thanks

    Hi,
    I think you have create Service PO with description & UOM .
    then that you have mention activity for services ( Service line) . But if you mention n number of service line  that all values acumulate to service line of line item.
    so, you can't get different entery in accounting document & material document. this always w r t line item of the service PO.
    You have to note one think  all the service line tiem is unter the line item 10 only.
    just check your PO in ME23N.
    SAM

  • How to remove a service line item from a service related PO

    Guys,
    I am doing a report thro' which a user can upload the details for a Service related PO. If the PO contains more Service Line Item than the upload file, then I want to remove those Service Line Items. I used BAPI_PO_CHANGE to upload the details. But I am trying to remove those additional Service Line Items using BDC in ME22 transaction. But it is not working correctly. Is there any program(s) thro' which I can remove those Service Line Items? Any expert thoughts....
    Advance Thanks
    Ramesh

    I did it through BDC.

  • BAPI Error: No account assignment exists for service line 0000000000

    I am using BAPI : BAPI_PO_CREATE1 to create a PO.
    I am getting this error while creating PO  "No account assignment exists for service line 0000000000"
    Please help.

    Yes...
    for each item i am creating one parent service record and one child service record with REQUISITION_SERVICES.
    the Package no for parent is the subpackage no for child.
    also for each item, I fill REQUISITION_ACCOUNT_ASSIGNMENT and REQUISITION_SRV_ACCASS_VALUES
    Still I get the Error.
    Thanks to help me resolve.

  • Issue with PO change output - Service line items

    Hi All,
    This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
    Some one goes and makes changes to 1st service line items of PO line item 10.
    A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
    Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
    Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
    Regards,
    Shahu

    If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

  • How to create 'Planned service line' using BAPI_ENTRYSHEET_CREATE? Pl. help

    I need to create service entry sheet ( SES ) using input data from text file through BAPI_ENTRYSHEET_CREATE.
    If the input contains service line items, which are not present in PO, it should be treated as an unplanned service and correspondingly 'unplanned' indicator is to be set on ML81N ( Service netry sheet ) display.
    I want to make an entry unplanned if the input field external no. ( Field: BAPIESLLC-EXT_LINE ) is not matching with external no. field of corresponding purchase order to which the SES refers.
    The BAPI works fine for all cases except one. If the unplanned service line contains field SERVICE_NO value which is matching with a SERVICE_NO in PO, it is invariable treated by BAPI as  'PLANNED'. ie. BAPI decides whenther a service line is planned or unplanned based on SERVICE_NO only.
    For eg. Let a PO contains one service line with SERVICE_NO value 1008505.
                If SES input file contains 2 service entries with SERVICE_NO value 1008505.
                While creating SES, the BAPI should treat first entry as 'planned' and second line as 'unplanned'.
                But while running the program, both lines are created as 'Planned'  only, since SERVICE_NO value 1008505 exists in the PO.
    I need to set the service line planned/unplanned through my prgram, overriding the automatic setting up of BAPI_ENTRYSHEET_CREATE.
    Hope this clarifies my requirement.
    Grateful if somebody cam provide a solution.
    Thanks & Regards,
    Manju

    Do NOT USE BAPI_SALESORDER_CREATEFROMDATA, that FM is obsolete!
    Use BAPI_SALESORDER_CREATEFROMDAT1 .
    To build a reference to your contract you have to supply ORDER_HEADER_IN.
    Here´s a sample:
    MOVE:
    gs_vbak-vbeln TO ls_bapisdhd1-refobjkey,
    gs_vbak-vbeln TO ls_bapisdhd1-ref_doc,
    gs_vbak-vbtyp TO ls_bapisdhd1-refdoc_cat,
    gs_vbak-auart TO ls_bapisdhd1-refdoctype.
    also gothrouh the links
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/abap%2b-%2bsimple%2bprogram%2bto%2bcreate%2bsales%2border%2busing%2bbapi

  • Subcontracting: Picking Relevancy of service Line Item in Inbound Delivery

    Hi experts
    I have a challenge. There is a Subcontracting PO having 2 line items, 1st one is Trading product which is the physical finished product & 2nd line item is service line item( service material type). So Can we create a Inbound Delivery wrt PO having Service Line item to do receipt?
    I tried creating Inbound but failed, error is : material ( service line item) is not extended to Warehouse. But my requirement is: it shouldnu2019t be extended to WM views so that it only appears in Inbound delivery as line item & it should not be relevant for Picking.
    Any idea how can we do this?
    Rgds
    Ram

    Hi
    No delivery is possible for item catageory D or material type ( DIEN)
    Edited by: Sanjay  Shah on Sep 20, 2010 3:50 PM

  • Picking Relevancy of Service Line item in Inbound- a Challenge

    Hi experts
    I have a challenge. There is a Subcontracting PO having 2 line items, 1st one is Trading product which is the physical finished product & 2nd line item is service line item( service material type). So Can we create a Inbound Delivery wrt PO having Service Line item to do receipt?
    I tried creating Inbound but failed, error is : material ( service line item) is not extended to Warehouse. But my requirement is: it shouldnu2019t be extended to WM views so that it only appears in Inbound delivery as line item & it should not be relevant for Picking.
    Any idea how can we do this?
    Rgds
    Ram

    Hi
    No delivery is possible for item catageory D or material type ( DIEN)
    Edited by: Sanjay  Shah on Sep 20, 2010 3:50 PM

  • Error while editing PO - deleting service line item and creating material line item.

    In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
    Back end error: Enter G/L account
    Back end error: LIne item still contains faulty items.
    This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
    I need to know the reason for this issue and how it can be solved?

    PO Values (Inc Tax):
    Item 1: INR 228 L
    Item 2: INR 27.83 L   (Payment also done in 2008)
    GR for Item 1: INR 207.46 L
    Remaining Comm = INR 21.01 L
    Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
    User changing for remaining qty.
    Budget Report values:
    Previous Years:  Budget, Actual & Assigned = 304.85 L
                                Available = 0      (Carry Forward done for Budget & Commitments)
    2011:                   Budget = 75.15 L
                                Actual = 53.86 L
                                Comm = 21.01 L   (Same as Remaining Commitment)
                                Avai = 0.28 L
    Hope this will help.

  • No account assignment exist for service line.

    Good Morning
    When I try to create a Purchase Order by Shopping Cart created directly in SRM it works normally but when I try to create a Purchase Order by Shopping Cart created based on Purchase Requisition from R/3 it gives me the follow message: "No account assignment exist for service line 10".
    I´m in SRM Server 5.5 SP 11 and the R/3 version 4.7.
    Someone could help me?
    Thanks
    Edited by: Victor Hugo Santos Sousa on Jul 4, 2008 3:00 PM

    try to use existing  package number + 1.
    select MAX( packno ) from eban into w_packno where packno NE ' ' .
    v_packno = w_packno + '0000000001'.
    W_REQUISITION_ITEMS-PCKG_NO = v_packno.
    and also ref. link.,
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-SRV-ACC+Account+Assignment

  • Se518 no account assignment exists for service line

    Hi Experts,
    We are using SRM701 Patch 04. I am creating a RFx with a limit item then create the purchase order based on the accepted bid. We found the error message SE518 in backend system via /SAPPO/PPO2 when we are using the driver function "/SAPSRM/CL_SOA_ADPT_PO_CRT_ERP". But If I changed the Driver function to "CL_BBP_BS_ADAPTER_PO_CRT_ERP10", it can be created successfully.
    Please advise how to fix the issue when we are using /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP. Thanks a lot
    regards,
    Jian

    Hiren,
    Every service line will have to be assigned to a G/L account or Cost Center. That is what the error message of the BAPI is.
    Pass the required account assignment details in the BAPI and that should get rectified.
    Regards,
    Ravi
    Note : Please reward the posts that are helpful

Maybe you are looking for