DSL in the city, do we have dial up access numbers in upstate?

I have DSL in the city, do we have dial up access numbers in upstate?
Anyone know who to call for that number?
Thanks
Ñin

An Air card that someone is talking about would have to be something along the lines of 3G or 4G USB adapters. These are of course, Wireless data plans that use the cell phone towers so you'd need to make sure that signal is good out where you are anyways to even get that. Other than that, it's slow as heck satellite or trying to convince Verizon to set up pole-mounted DSLAMs somewhere within 2 miles of you for DSL. ISDN could be an option though I don't think Verizon installs those too much any more, and they would only give 128k of bandwidth anyways, despite lower latency.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

  • I logon as root from the CDE but dont have full file access...

    I am login in in SOLARIS 8 (intel) as root, but I dont have write permission to certail directories ( /home for example)....
    Any help will be greatly appreciated....
    Thanks....

    Hi
    You can not access certain directories like /home,/net and /xfn since
    they are by default reserved for use with the Solaris automounter
    utility. Automount is a facility in Solaris by which you can automatically mount remote network directories whenever you access
    them. These directories get unmounted automatically after 5 minutes
    if no one uses them thus saving network bandwidth.
    If you still want to use these directories, look in to your automount
    maps in the /etc directory. All the maps are stored usually in files
    auto_direct, auto_home and auto_master. To use the /home,/net,/xfn directories, just comment out all entries in these files (by putting
    a # at the beginning of each line) and run "automount -v". For more
    info, refer to the man pages of automount.
    HTH
    Shridhar

  • When I try to install the latest version of iTunes, it says the installer doesn't have sufficient administrator access to install.

    When I try to install the latest version of iTunes, an error message comes up saying the installer has insufficient administrator capability.

    What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

  • Home Sharing Problem: "You do not have permission to access the requested resource"

    This problem has been posted numerous times here with not one single answer that I can find. Not only does it take about fifteen minutes for Home Sharing to load on my iPad, once it does load I get the "You do not have permission to access the requested resource" when I try to play any video. I've tried resetting everything. Even home videos won't play via Home Sharing. Is there a known bug that someone can tell me about? Or is Home Sharing on iPad just broken.
    Possibly related: videos that play on my iPhone on Facebook won't play on my iPad. The iPad is newer and more powerful, you think it would be the other way around. I have never used a jail break on anything. I have never installed any kind of security software.
    iPhone 4, iPad 3, mid-2010 27" iMac, Airport Extreme all on the same network with the same iCloud ID.

    I have been having the same issues on all my iPads / iPhones and can't come up with much info either.
    I just seemed to fix it by quitting the app on the device, changing my wifi network to the 5Ghz band and retrying. Loads quick and plays every time (for the last 5 minutes at least)
    I did read that there is a bug, in that if you close down the app after you have watched the video(s) you won't get the "permission" error. Seems to be working.
    Not super helpful but I feel your pain.

  • Cannot play shared videos - get "you don't have permission to access the requested resource" error

    When I try to access my shared videos from my iphone 5 (OS 7.01), I get the "You do not have permission to access the requested resource".  The videos I'm trying to play are mine....ripped, not ones purchased from apple.

    I had this problem too.
    I am running iTunes on an old PowerPC MacMini using iTunes 10.6.3. I was trying to stream video on my iPad mini and kept getting the error: "You do not have permission to access the requested resource".
    So, I turned on iTunes on my laptop which is using Mavericks and the latest version of iTunes. It worked fine off it. It's just sometimes I like to keep my laptop in its bag and run things off my iPad through my MacMini.
    So, I did follow the reset network settings on my iPad. It fixed it temporarily. In the middle of an episode of BBT the error message came up again.
    I tried starting iTunes again. I reboot the machine. Still got the error.
    So, I ran Onyx on the MacMini. There were a lot of permission errors on the hard drive. Once I fixed those, it seems I now have permission to access that resource.
    If you have a disk utility, try running it on your source computer to fix any disk permissions or errors that may be causing the error.
    In my case, it was the disk permissions needed repair.

  • I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

    I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills.  I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number.  Please let me know as soon as possible so I can change passwords or anything that is needed.
    thanks

    If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
    Barry

  • All the images in my Speed Dial thumbnails have disappeared and I can't get them back.

    All the images in my Speed Dial thumbnails have disappeared and I can't get them back. When I check the settings all the thumbnails have the site shown in the details so should be showing the site in the thumbnail, but they're just blank. I uninstalled Speed Dial and installed it again, but to no avail. Something is stopping the image appearing but don't know what. I paused blocking on Ghostery, but that makes no difference. Any suggestions would be welcome!

    See [[menu bar is missing]].

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

  • Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

    Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

    Then you have to bring it back to the country you bought it from. Warranty is not International.

  • I have an IPhone 4s that recently has had an issue receiving calls. I will get a voicemail but the phone did not ring.  When i go to call the person it stays on dialing and never connects.  I have to do a hard reboot and then I can call them

    My phone 4s has recently been acting up. I will receive a voicemail but the phone never rang. When I try to call the person back the phone gets stuck on dialing and then freezes I have plenty of signal bars, when I try to end the call it freezes.  I have to do a hard reboot and then the phone works again. It seems like this started after the last update.  My network is Verizon. Any suggestions?

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • Since upgrading to 5.0 I have not been able to access the firefox version of speed dial, what happend to this?

    On 5.0, what happened to the foxdial (similar to speed dial addon)?

    The player works for me in Firefox 3.6.26 on Linux, but not in current Firefox releases and in Google Chrome.
    Weird. It works in Firefox 10 if I run the object code in a new tab. This also works in Google Chrome.
    <pre><nowiki>data:text/html;charset=utf-8,<object data="http://media-player.cdn.level3.net/flash/v1_1_1/Level3MediaPlayer.swf" id="L3MP" type="application/x-shockwave-flash" height="382" width="640"><param value="transparent" name="wmode"><param value="true" name="allowfullscreen"><param value="HaloColor=0x0086db&amp;ToolTips=true&amp;AutoPlay=true&amp;VolumeLevel=50&amp;CaptionURL=Old Faithful Geyser Live!&amp;Title=Eyes on Yellowstone Made possible by Canon USA through a generous grant to the Yellowstone Park Foundation&amp;Logo=&amp;SRC=rtmp://npsaflivefs.fplive.net/npsaflive-live//stream50&amp;BufferTime=5&amp;AutoHideControls=false&amp;IsLive=true" name="flashvars"></object></nowiki></pre>

  • I have dial up connection for my internet.  What equipment do I need to be able to watch Netflix on my TV?

    I have dial up connection for my internet  What equipment do I need to be able to watch Netflix on my TV?

    First need would be a high speed Internet connection, such as Cable, DSL or Fibre service. Dial-up has nowhere near the capacity to provide Netflix service.
    Stedman

  • My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city. Also my iPod keeps pausing every like 30 seconds.. What do I do?

    My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city, so there are plenty of stations to find. Also my iPod keeps pausing every like 30 seconds when I try to listen to my music. I just got it for Christmas and already loaded it with songs.. What do I do?

    Push the headphone jack all the way in, you don't have it fully plugged in yet.

  • In a Roaming Network, Does the Primary Base Station have to be the only hub, or can spokes come out of an Extended Base Station?

    I live in the basement of an old, brick building, in one of 5 apartments, for the building's staff. I have an older Airport Extreme and Express setup that's working for me in my unit, connect to a Comcast Ubee cable modem. The rest of the basement shares a DSL connection through a wired network that includes three routers. I've been asked to build a network that the rest of the staff can share, using my cable connection and any new hardware required. Since ethernet cable is already in place for the legacy DSL network, I'd like to re-use it with new base stations and Airport Expresses, just swapping out the old gear. But the Roaming Network setup instructions show all spokes coming out of the Primary Base Station. This does not match my situation, where my cable modem is in a different apartment from the hub of the old network.
    My thought was to get two new Airport Extremes and wire one to my modem, replacing my old AE, and then place the other in my neighbor's apartment, connected by a new ethernet cable. His Extended Base Station would be where all the legacy ethernet cables terminate. I would plug them into the new, Extended Base Station on his end, and put Airport Expresses on the other ends, so each apartment (and the staff room) would have its own wired router.
    Will this configuration work? If not, can anyone suggest a better way? I'm an Apple products user but some of the other guys use Windows. My understanding is that this shouldn't be a problem.

    What I mean is that ethernet can be wired through switches.. (or bridged routers which are switches).
    So you have
    Router----Switch--Client
    .      .      .   |
    .      .      .Switch--Client
    .      .      .  |
    .      .      . Switch--Client
    The correct way to do this is
    Router----Client
    .      |
    .    Client
    .      |
    .     Client
    etc.. all clients are ethernet connected back to the router.. no switches. That means loads of ethernet.. one for every client run all the way back to a central area.
    What you are proposing is to run switches (bridged routers).. so you are using each ethernet link to connect more than one computer. This is wrong from a purists point of view.
    Sorry for the ASCII art work.. but I hope it makes sense.
    You do not need fancy gear to make this all work.. what you do need is a main controlling router.
    You cannot have two routers.. so you cannot put a switch between the cable modem and use two router. You have cable modem---ROUTER.
    That single router must therefore do all the work... part of that work is to provide some way to control usage.. so everyone gets a fair share.. and keep an eye on quotas.. sadly you cannot do both with any cheap routers I know of.. what I propose you do is WNDR3800 flashed to gargoyle firmware.. this is key.. this firmware will be able to track usage and allow each user a fixed amount of your bandwidth.. upload in particular.. as even with high speed on your download you still do not have upload of the same capacity.
    As far as end users are concerned they do not need fancy equipment.. they just need a wireless router. So they can get connection by ethernet or wireless.
    Talk to me directly if you need more help..email is here. 
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s
    my email is also in the profile. But I use the gmail more.

  • Does anyone know of an excellerator that I can down load to speed up my entire internet connection. I have dial up from windstream,i live in middle of no-where,KY and dont have access to high-speed intewrnet here, PLEASE HELP.

    My internet connection is very slow dial up thru windstream and they dont offer high speed where i live and neither does anyone except Hughes Net,but they are way to expensive. Not an option for me at this time. I used to have dial-up thru southeast telephone and they gave me an excellerator that sped up everything.

    Thanks for taking the time to respond to my question. No windstream doesnt offer that,i asked and they have no intention to do that in the near future. They plan on offering highspeed to everyone in the future,but as of now they dont offer it in my area and have no plans of replacing the phone lines in my area anytime soon either. so until they replace the lines in my area,its not available . I am glad you told me that i cant add it ...Doug

Maybe you are looking for

  • Valuation and account assignment

    Hi, during MIRO system generates the following error, I cannot understand what is the problem: Acct determination for Tax exchange rate differences with keys   not defined  in ch/acts PDCA                                                              

  • Ws_query function module obsolete in ECC 6.0

    HI experts,    V r upgrading system from 4.6 to ecc 6.0 . In one of the programs FM ws_query is obsole, pls let me know the replacement of it. form process_selections_filen.   call function 'WS_QUERY'        exporting             filename = p_filen  

  • Saving single CR or LF-Characters in a varchar2-Field

    I'm using Oracle 8.1.7 withc NLS_LANG = AMERICAN_AMERICA.UTF8 on Client and Server. When I try to save CR or LF as single Characters in a Text (not as CRLF-Combination), there are changed. A CR will be deletet and a LF will be expandet to a CRLF. Wha

  • I have not had any problems with iOS 4

    I don't know about you guys, but I have not had any problems yet for the new iOS 4 update on my iPhone 3g. I followed the instructions provided on apple's website on how to download the new update and also downloaded from apple's website the new vers

  • Is it possible to restore Ipod touch to a backup from a month ago?

    Help, I am no computer wiz and have managed to attempt to update my software and whipped out my music library.  In the process the system backed up so the current backups are blank.  Is there a way to restore a back up from a few months ago that I kn