DSL Initial Setup

Why is it that the Verizon reps that my users call to help them initially set up their DSL wireless network insist that they have to install the Verizon software from the CD that came with their package?
When the crappy software fails to install and damages all sorts of system settings and permissions the reps go on to blame the antivirus software that we use.
Wouldn't it be a whole lot easier to skip the stupid unnecessary software and just set up their router remotely, ask them what to call the network and what to make the password, and let them just connect to it through windows?
I feel like I should be sending out a pre-emptive email to anyone who orders Verizon DSL telling them no matter what you do, do NOT follow verizon directions and just give me a call when you're ready to set this up - otherwise you end up with no internet access and a computer that you need to bring back to me for a few hours just so I can undo the damage that was caused by Verizon.
Seriously,

Ok, let us do this step by step.
#1 With your laptop online check the IP Address, Subnet Mask, Default Gateway, And DNS Server(s) on it..
I have no idea of what you OS and Version you use on that computer, so I will assume Windows XP. If you do not use Windows XP, what are you using?
Go to Start -> Run.
Type in cmd and press enter.
In the new window, called the command prompt, type in ipconfig /all and press enter.
#2 Compare the IP Address on your computer to the IP Address as shown at http://www.whatsmyip.org/
Are they (is it) the same or different?
#3 If they are the same, are you in a PPPoE area or a DHCP area?
To do this, since I have no idea of your OS and version - I will still assume that you are using Windows XP...
Go to Start -> Connect to -> Show all connections OR If that does not exist, then go to Start -> Control Panel -> Network Connections.
At that screen, is there any broadband connections listed - that says something about WAN MiniPort (PPPoE)?
For example, here is a screen shot from my computer.
If you do not see anything about WAN MiniPort (PPPoE)? , you are in a DHCP area.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Initial setup: Is it possible without using DSL?

Hi!
My wife bought a 2TB Time Capsule, to be used only as a wireless external hard drive, as we don't need the Extreme AirPort base part of it.
She's tried to set it up a couple of times without connecting it to our DSL box, but without success.
My question is simple: Is it possible to set up Time Capsule without having to connect to the internet, and if so, how?
Thanks in advance,

+First, your idea of connecting the Time Capsule to the modem would only be for the initial setup, right?+
To use this installation option, you would need to consider this as a permanent setup. If this will not meet your requirements, then two choices remain.
+Looks as if having two separate wireless networks might be the lesser of two evils+
Two separate networks would be the worst of two evils. If you cannot connect your modem and Time Capsule together permanently using an ethernet connection, then the next best option would be to have the Time Capsule connect to and "join" your existing wireless network. That is why I keep asking for the information to provide you with instructions to configure it this way.
If you want to go the two separate wireless network route, I just want to make sure that you understand that the Time Capsule automatically backs up any changes that you have made each hour. You will need to manually switch wireless networks for backups to occur. Do you really want to do this? If not, backups will be missed and delayed, and I cannot offer much assurance that you will have future reliable operation.
But, it's your choice and I offered to help with the setup if you will decide which route you want to take. It's either 1) Join your existing wireless network and everything will be pretty much invisible for your backups, or 2) setup a separate network and manually switch to the Time Capsule network each time you want to perform a backup. Which would you prefer?

How can I use a different computer from the one on which the initial setup was run for my iphone 3gs?

I would like to use my new MacBook to manage the information on my iphone.
Attempts to use any other computer other than the original one used in the initial setup generates a message that warns me that everything on the iphone will be erased? How can I back up the information and switch to the MacBook?

Copy your entire iTunes folder to your new computer (see http://support.apple.com/kb/HT4527). Then carefully follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770.

HT5622 I did not choose "use icloud" option for my initial setup. so, it is creating for not enough space in my ipad. How do I go back and set up icloud to store data?

I did not choose "use icloud" option for storing during my initial setup. How can I reset icloud account, so it can be used for storing.

Welcome to Apple Support Communities
If you are planning on using iCloud to store files, forget about iCloud and use a cloud storage service like SkyDrive or Dropbox. iCloud is focused on information sync between the iPhone, iPad, iPod touch, Mac and PC instead of storing files like MobileMe. It's not worth using iCloud for this.
If you still want to set up iCloud, open Settings > iCloud, log in with your Apple ID and follow its steps

T500 Vista buying experience and initial setup problems

This a long post but I felt the information could be used by others buying a notebook and trying to set it up.
I have used a Thinkpad T40 (1 GB, XP Pro) at work since 2003 and just love the rock-solid keyboard, screen, and hinges. The IT department has offered me the most recent Dell computer as an upgrade but I much prefer to keep my old reliable T40.
When my daughter needed a notebook for university in September, it was only natural to consider Lenovo, having heard about too many quality problems with other manufacturers. I wanted this notebook to last through the 4 years without any hardware problems.
I did a lot of research on the Web and read numerous Thinkpad forums. The information gathered was invaluable for deciding which configuration to buy. Note that I have never used VISTA before, nor have I ever opened a notebook to replace parts.
Buying experience:
- On my first contact with the Lenovo Sales desk in Canada, they mentioned there was a special 25% coupon sale, if my configuration was over $1500 (discounted price). These specials come back often, so it is best to check the Lenovo site. At the time, there was a free integrated camera, free upgrade to 250 MB HDD and free shipping. Since these promotions can be removed at any time, I decided to place an online order for a Thinkpad T500, before having completed all my research. It is easy to place an order online. You just have to remember that not all items contribute to making up the $1500, such as MS Office software.
- Lenovo Sales telephone support for answering any questions about online ordering was outstanding and very helpful.
- Note that if a particular online configuration is there one week, it might not be there the next week. It depends on parts availability at Lenovo.
- In order to get the 25% coupon discount, I had to add some items to my configuration to reach $1500, such as Bluetooth, Wifi 5100, which I did not really need, but the saving on the overall cost was worthwhile.
- I had ordered a WXGA (1280 x 800) High Brightness LED Backlit screen and 3 GB of RAM. After reading about the poor display quality of these screens, I was able to cancel my order by phone the next day (after making sure the same deal was still available), and place a new revised order for a WSXGA+ TFT (1680 x 1050) screen. Since the configuration price for an additional 2 GB RAM was $110 CDN, I decided to buy the extra 2 GB RAM (only $43 CDN) as an accessory, on the same order, separate from the T500 configuration. I could then install the RAM myself to save $67 ! Just make sure you pay the extra to get the base 2 GB RAM on one DIMM, since there are only 2 slots available. I know I will only be using 3.5 GB with my 32-bit Windows, but at least, if one of the DIMMs goes bad, I can still operate on 2 GB.
- as for choosing which CPU to buy, I chose in the middle range, starting with the first CPU having 3 MB L2 cache.
- I did not buy MS Office or McAfee Antivirus with the configuration. Since my daughter attends a post-secondary institution, she was able to order MS Office Ultimate 2007 for $64 CDN + $13 for the DVD. Microsoft has had this promotion on their site
(http://www.microsoft.com/student/discounts/theultimatesteal-ca/default.aspx)
for a while, but it is not well known. You get 8 MS products for one low price and it is completely legal for numerous countries ! I downloaded the software since it took 5 weeks to get the DVD delivered ! At the end of 4 weeks, I contacted Microsoft to tell them I had still not received the DVD. So I received the first DVD and a few weeks later, I received a second copy. So much for quick shipping !
Initial impressions:
- I received 3 separate shipments: 1 free Thinkpad privacy filter to install on the screen, the 2 GB RAM, and finally the T500 (which took about 2 weeks).
-The stainless steel hinges are rock-solid. When trying to raise the lid in the first weeks, you have to hold down the keyboard. Not at all like the hinges I see on the Dell notebooks at work.
- The 3 USB port connections are very tight, which means they should last through repeated plugging and unplugging.
- The T500 is surprisingly quiet, more than my T40. You can hardly hear the fan.
- I am extremely satisfied with the screen resolution, colours, and quality.
- The only disappointment was the keyboard ! Typing on the left-hand side (Q,W keys) produced an annoying "clunk". This was the worst keyboard I had ever used, being accustomed to the legendary quality of my T40. Even my daughter complained about the keyboard. I had read on the forums about the "flex" in the keyboard. Before ordering, when I asked the Sales Rep if these known problems had been solved, I was told that yes, the keyboard flex was no longer an issue. Too bad this was not true !
Initial Setup:
- Setup was easy. Just follow the on-screen instructions.
- I was not very happy to see a trial version of MS-Office and McAfee Antivirus on my notebook. I had not ordered it on the online configuration and did not want it. I had read on the forums that other users had all sorts of problems trying to get their own version of MS Office working (activation keys not being recognized), when the pre-loaded software was still there. And I knew how difficult it could be to erase all traces of McAfee by myself.
Hardware problems:
- after I burned my very first DVD, I pressed the Eject button. To my surprise, there was a thin grey foam ring (about 3 cm diameter) sitting on top of my DVD media. I assumed that this came from the roof of the DVD drive and the manufacturing process had missed the glue to keep it there. I contacted Lenovo and they immediately sent out a replacement (received the next day), which was easy to install. I then returned the defective part to Lenovo. My only complaint is that this was a refurbished unit. I was expecting a new unit since the part was defective out of the box and not a few months later.
- for the defective keyboard, I contacted Lenovo and mentioned the numerous complaints on the forums, and they sent me a new keyboard (FRU 42T3938). Unlike the DVD drive, I did not have to send back the original keyboard. However, the replacement keyboard was exactly the same as the original, with a thin flexible backing full of holes. I contacted Lenovo again in the morning and the agent mentioned I should contact Sales, since there was nothing more he could do. That afternoon, the agent called me to say that after further research, he had found a replacement keyboard that would correct the flex. When I received the second replacement keyboard (FRU 42T3210), I knew it was the right one, since there were far less holes in the more solid backing plate. I followed the instructions for replacing the keyboard and added my additional 2 GB RAM at the same time, since it is in the same area, under the palm rest. Now the keyboard is almost like my solid T40, and I am no longer ashamed of the T500 keyboard. For those of you wondering what an ACNOR or CSA keyboard is, it is one where the 5 most common French accented characters (and not only the é) are used with one keystroke. I have been using such a keyboard disposition since 1994 and it is invaluable when typing in French.
For pictures comparing the defective and replacement keyboards, see
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-keyboard-replacement/m-p/158451#M15525
My immediate goals:
- out of the box, there are 3 partitions: partitions Q (10 GB) and S (1 GB) are Lenovo partitions to recover the operating system, C partition is a single partition over 200 GB on my 250 GB DD. I wanted to partition the C: drive in multiple partitions.
- I also wanted to eliminate MS Office and McAfee so I could install my own software (MS Office 2007 Ultimate and free Avast Antivirus). When I contacted Lenovo to ask how I could do this, they said I could use the recovery partition and "customize" it so that this software would not be installed. Turns out that this option was removed by Lenovo. I guess pressure from Microsoft and McAfee was too great ! The only other option was to use Add/Remove.
Partitioning problems.
- I ran Diskmgmt.msc (also available on XP) to see the layout of my HDD. Unfortunately, it did not seem to be powerful enough to partition like I wanted. But it is great to see the layout of the disk and do basic partitioning. (http://www.theeldergeek.com/hard_drives.htm)
- I installed the free EASUS Partition Manager (http://www.partition-tool.com/); the non-free Pro version works on 64-bit. I wanted to partition: C 35GB (Operating System and Office), D 20GB (other applications), E 25GB (Data), F 100GB (Music and Pictures). I also installed the free EASUS Todo Backup (http://www.todo-backup.com/) to do regular image backups as I was proceeding.
- while trying to partition the C drive, I must have made an error somewhere (I think I accidentally declared another partition as the active partition). Whenever I rebooted, I would get the message "Boot MGR is missing". I could not even use the recovery partition (Q and S) on the HDD. So my notebook was totally unusable. Fortunately, I had burned 4 Recovery DVD's, as soon as the OS was operational. The first recovery DVD booted OK. However, the system would not recognize any of the 3 other recovery DVD, displaying a message such as wrong disk inserted or something similar. Imagine if in a few months I had needed to use these recovery DVD that I had burned; they were completely useless and I would have nothing to recover with. Very scary !
- I explained the problem to Lenovo Support and they sent me within 3 days a set of 4 Rescue & Recovery DVD. By following the instructions, it took 2 hours to recover to a working system. The good: no Office or McAfee trial software came with this recovery. The bad: there was a 2 GB empty partition at the beginning of the HDD and 10 GB of unallocated space at the end of the disk. Why Lenovo would do this, I don't know; seems a bit sloppy to me. Also, I had to manually reconfigure everything, since there is no "just follow the instructions" as when configuring the "out-of-the-box" system. I had to install my own PDF viewer
(free open source PDF X-viewer http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer), Adobe Flash, etc...
- the major problem in partitioning is the inability to shrink a partition (such as C) in order to free up space after to add extended partitions
(http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-...). There always seems to be VISTA unmovable files, MBR or something else. After reading numerous posts, I installed the trial version (30 days) of Raxco PerfectDisk Home edition in order to consolidate all the files to the front of the C: drive. A few iterations were required since the MBR seems to be placed in the middle of the partition. I was finally able to partition my HDD exactly as I wanted. I was so pleased with the efficiency and ease of use of PerfectDisk that I bought the Pro 10 version. Just wait for when the software is occasionally discounted. (http://www.perfectdisk.com/home)
VISTA User account setup:
I had created my E partition to store all user data of all accounts, since I would have multiple accounts on the computer. I also wanted to store all music and pictures in the Public folder on F partition. There are numerous methods described on the Internet, most of which seem too complicated. See http://joshmouch.wordpress.com/2007/04/07/change-user-profile-folder-location-in-vista/ and
http://www.vista4beginners.com/Move-user-files-folders-to-another-partition?page=1. I finally decided to do just 2 simple registry modifications described in the last post here
(http://superuser.com/questions/6391/moving-users-folder-on-windows-vista-seven-to-another-partition).
It worked for me but use at your own risk ! Just edit the 2 Registry keys and replace the C: drive by the one you need.
- I only had the Admin account created on the C: partition. Before creating any other user accounts, I modified the registry so that all new user accounts created would use my E partition.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList ProfilesDirectory = E:\Users
- I modified the registry so that the Public folder would be on my F partition.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Public = F:\Public
Other notes of interest:
- I had been a long-time subscriber to the Fred Langa Langalist
(http://www.langa.com/backups/backups.htm). I now subscribe to the excellent Windows Secrets newsletter (http://www.windowssecrets.com/). The information provided is very useful.
- I had considered an inexpensive boot manager, partition manager and imaging software (BootIt Next Generation) highly recommended by Fred Langa
(http://www.terabyteunlimited.com/index.htm). But it seemed a bit like overkill for my needs. There is a fully-functioning trial version.
- I regularly consult a complete list of recommended free software on Gizmo's Freeware review (http://www.techsupportalert.com). One recommended free open source defragmenter which I did not use was MyDefrag (http://www.mydefrag.com/).
- download and install the latest version of the Lenovo System Tools (Toolbox). It is very easy to use and can troubleshoot all hardware problems. Search for MIGR-67520 on the Lenovo site.
- you can find Roxio DVD burning software on the Lenovo site (MIGR-72359 on the Lenovo site). I have not installed it yet.
- use the Lenovo System Update to keep your drivers up-to-date.
- for info on how to use switchable graphics, search on the Lenovo site for MIGR-70495.
- for tips on setting battery parameters, http://forum.notebookreview.com/showthread.php?t=320082
Recommendations to Lenovo:
- don't ship poor quality keyboards. You have too much to lose, for the small manufacturing savings.
- don't pre-install trial versions of Office or McAfee. This should be an option and not be forced onto buyers.
- at least ship the HDD with a 40 GB C primary partition and the rest as D: partition. This would make it easier for users who are not technical.
- if you are going to include an integrated camera, provide software to use it. Currently, I have no way of taking a picture or making a video without acquiring other software. The technique described here
(http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67413) does not work !
- provide some software to reduce the speed of the DVD drive when watching movies. The noise at the default maximum speed is very annoying.
Thinkpad T500 | Model 2081-CTO | Intel Core 2 Duo P8700 (2.53GHz, 1066MHz 3MB L2 Cache) | 4 GB PC3-8500 DDR3 RAM | 15.4" WSXGA+ | ATI Mobility Radeon 3650 (256MB) | 250GB Hitachi HDD (5400rpm) | Bluetooth 2.1 | Integrated Camera | DVD Recordable UltraBay Slim | Intel Wifi Link 5100 | Sony 6-cell Li-Ion battery | Vista Home Premium 32-bit SP1

people complaining about problems installing an office over another office are (dare i say it) stupid. it makes absolutely no sense installing one over the trial version. just uninstall the trial and you'll be fine. every single time.
as for problem with uninstalling mcafee (or any other antivirus, for that matter, just download the uninstaller from the software company e.g. http://service.mcafee.com/FAQDocument.aspx?id=TS100507 for mcafee.
that said i believe you get to choose if you want mcafee and/or office when you go through the inital boot, the "on-screen instructions"
you can slow down the odd via power manager
and thanks for the tips on changing the reg to have the user profiles somewhere else!
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Is it possible to restore from a backup after initial setup on my iPad air?

is it possible to restore from a backup after initial setup on my iPad air?

You don't even have to do to an erase all content and settings.
Just connect the iPad to iTunes. Once it appears on the left, right click on it and select restore from backup. It's that easy.

SAP PI 7.3 - initial setup Configuration wizard

Hi Experts,
While running the initial setup Configuration wizard.,facing the following issue.
Thanks in advance
Exception Class: com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException
Exception Message: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
Stack Trace
com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:144)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:156)
     at java.lang.Thread.run(Thread.java:679)
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:61)
     at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:36)
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:133)
     ... 18 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.CPIServiceExecutionException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:107)
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:59)
     ... 20 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.AbapConfigurationProviderBaseException: Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.
     at com.sap.tc.lm.ctc.provider.abapconfiguration.connector.JCOServiceConnector.getFunction(JCOServiceConnector.java:97)
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:98)
     ... 21 more

Hello Vijay,
Please check user DDIC in client 000 - ensure that it exists, not locked and has the same password as in Integration Server client.
Regards,
Vadim

New MBP 15 retina (mid 2014) freeze during initial setup - any issues?

Hi all - just picked up a new retina MBP 15 base model (integrated graphics / 256GB / 16 GB RAM). After turning it on for the first time and running the initial setup the computer froze on the diagnostics and usage page (after I clicked continue). I had also setup an account and named the computer. After about 25 minutes of seeing a spinning beach ball, I held down the power button for a hard shut down. I turned it back on and it went through the initial setup process without issue (although I had to create a different user account since the previous one was recognized). The computer was pre-loaded with Yosemite and I immediately updated the software with the latest patch. Also, I noticed both user accounts I had made were stored, so I deleted the first one that I created during the failed setup.
Should this be a cause for concern? Everything seems to be working properly outside of the initial setup freeze. Have any other users experienced this? Also, I had thought the macbook would have had Mavericks on it and that a manual upgrade to Yosemite would have been required. Is this an issue with Yosemite? Apologies for several questions in one post.

Hi there again.
I didn't had any of the problems you mentioned (45' minutes setup). We tried along with AppleCare to make a new partition to the hard disk in order to install OS in that one and boot the machine from it. It didn't help as the machine didn't let me to make a partition. Later on we swiped the hard disk and at the moment where you choose the hard disk to install OS, there wasn't any to choose. Returned the machine to the store I bought it and they sent it to the authorized service center where they told me that the machine just didn't have any OS installed.
I asked them why there isn't any hard disks available and they told that there was a problem to the file sector of the hard disk. They repaired it and they sent the machine back to me. Regarding why the machine came with Mavericks and not with Yosemite, I suppose that they had the machine in stock (knowing that Yosemite was released after the MBP mid-2014).
There are still some problems I don't like at all. Safari - opened pdf in browser - fully loaded, scrolling down...cracks.
I'm not happy at all. That was my first purchase on Apple's computers and I don't know if I will do it again.
By the way, I noticed the same performance in other computers as well. (click on "About this Mac", then click on "Overview, Displays, Storage" etc. There, I see cracks on graphics between the change to other tabs.)

Initial setup on mac mini server without monitor?

I have bought a mac mini lion server today. I do not have desktops in home, so no monitors.
How can I setup/login into it? I tried Server Admin Tools, but I do not have root password (tried blank and serial number).

I have a MBA late 2010. So, no thunderbolt.
I was hoping connect to it using ssh to execute initial setup to be abble to use remote admin tool.
The problem is that ssh do not accept root connection.
Since I do not have any display at all, the idea would be to turn the server on and setup it. Since it is a server I thought I could do this without any issue.
Linc. In your idea. How should I start mac mini in disk mode and how can I boot the MBA using mini internal drive?
Any ideas?

Final Cut Pro 7 initial setup settings (DSLR user) new user

Hello Guys,
I just bought Final Cut Pro 7 and installed it. Can anyone give me some tips on how to do an initial setup or how I should set up my Final Cut Pro. Scratch disk, ext.
How can I optimize it for HD DSLR? I mainly shoot with Canon 5d and Canon7d DSLR with 24frames per second and I will importing and editing and capturing footage from these DSLR, how should I set the preferences and settings be on my final cut pro 7 best optimal use for these cameras.
I also heard that I should be converting all the videos to pro res 422 before editing, so It can render faster or something like that. Can some please explain that pro res conversion part.
I am also a new user, I have little knowledge on fcp, so please bare with my newbie questions. Thanks so much.

Thanks Nick for the links, I'm actually a video guy, been doing corporate av video for concerts, professional sports, broadway theatre, and corporate evens, and also do my own videography on the side. But I am more of a shooter, I have used FCP in the past awhile back but I had a partner that did all of the editing. But I have used it FCP in the past, can't remember much though.
Does anyone know which apple pro res format is best for DSLR editing. I see there is 422, 422(proxy), 422(HQ), 422(LT) and 4444.

PI 7.1 initial setup problem

Hi,
While installing PI 7.1 I started the Netweaver initial setup. At step 338 i got an error message as follows:
"Error: ABAP technical system 'PI7 on nwpi71' not found"
Any idea how to I can solve this problem.

Just a quick question... Can you proceed past this step or does your install stop completely if this is not fulfilled?
The reason I ask is that this should either be done automatically by the install or if not then once the install is finished you have the oppotunity to create the technical and business systems as post config steps...
RZ70 is the transaction that you use to register the technical system

Lumia 925 initial setup with no SIM card

Hi,
Is it possible to do the initial setup of a Lumia 925 with no SIM card inserted?
Cheers,

Yes, over WiFi.

Location of the picture during initial setup

I recently bought a Mac Pro.During the initial setup i was asked for picture.I clicked the same using the inbuilt web cam.
This pic is displayed in my ichat and apple mail.But i am unable to search for this pic.
Can anyone please tell me the location where it is stored ???

Hi,
I have responded oin the other thread (I clicked you name on the left to see your Posts).
I have somewhat changed my mind on the Folder the Address Book "Sees" as it seems it keep record of the lst folder you went (I must have used the Recent Pics folder last time I changed the Pic)
I don't think I am going to have the answer but my posting there will raise it to the top of the pile (briefly) and have it on the front page there for little while longer - which may help when you post back some more info there.
8:10 PM Friday; August 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Initial setup without a mouse?

Got my iMac back from repair. I have a wired keyboard and a wireless magic mouse.
I'm stuck during initial setup because the mouse isn't recognized and the keyboard can't finish the setup. For example, it won't let me use the Return key to select my country.
And the Bluetooth setup assistant never popped up to even look for my mouse.
Any way to finish the setup without having to go buy a usb mouse?

If you searched this web site you would find this:
Intel-based Macs: Resetting the System Management Controller (SMC)
Barry

How to restore data on new iphone without using the initial setup

I bought a new iphone 5s today but the guy in the shop skipped the initial setup to activate the sim meaning I didn't get to restore the data through iCloud from my old phone as the wifi in the shop wasn't working. I have now got home to a wifi connection and have signed into my iCloud account but how do I restore my data? Or how do I get back to the initial setup?

On your phone: Settings>General>Reset>Erase All Content & Settings. You can now restore your previous phone's backup to your new phone.

DSL Initial Setup

Similar Messages

Maybe you are looking for