DSL user name & password

When I connected my replacement DSL modem/router from Verizon, it connected automatically. I did not have to enter the Verizon DSL user name and password that were used for my old modem and router. When I checked the new modem settings, the user name listed is "dslnew" and the password is not visible (only ********).
Do I need to change this to my old login, or just leave as is?

On most VZ modems the default login is admin and password. Then you S/B prompted to set a new password. Have you tried pressing and holding the reset button (15 seconds) while the modem is on. This will zap any custom settings and set it to factory specs.
Does the modem have a sticker with the default login information on it? (My FIOS router did).
Could you please list the make and model of your modem if this does not help.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Similar Messages

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

HT1515 Will Airport Express work in hotels in China? They require user name/password to connect. Has anyone used one there?

I will be traveling in China with my iPad2 and want to use hotel wireless. It requires a sign-in with user name/password. Can I use an Airport Express for this purpose? How do I set it up for that? I have an old Express (pre-2007); can I use it or do I need to upgrade to the new model?

OK - I have never been to China but the posts here say that it can be done - the cable from the hotel should be connected to the WAN port of the Express - the Express should be in bridge mode and set to create a wireless network with a name and password of your choice - you can do this with a computer before you leave for China or with the iPad if you have previously downloaded the Airport Utility app - you would then connect to your network and attempt to bring up a web page such as Google - the hotel should then intervene and ask you for the login info that they have provided.
Charlie

File Adapter - anonymous login (or )User name ,password login - Efficient?

Hi Folks,
In File Adapter processing , anonymous login (or) proper user name password based login is recommended ?
Because we have faced many issue while using username based login in File adapter .
Which one is best ?
Regards.,
Shiva

Hi Shiva ,
We will go one by one :
You can go for the Anonymous login but the problem is the any body can access the FTP server and it is not the secure one,that is why business generally don't allow the Anonymous login.
Coming to Proper user name password login ,I would advice you to use this one as the connection is more secure in this case.But this also comes with a problem that the username password generally expires after some time as per security policy and you have to change the username password for the FTP server as well as in File adapter which you are using.But this problem can be solved by going for a permanent username and password.
I would recommend you to go for Proper user name and password.
Regards
Ravi Anand
Edited by: Ravi Anand@85 on Mar 12, 2010 7:56 AM

Error: sql.SQLError: [-4008] (at 1) Unknown user name/password combination

Hello Experts,
After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
Logical Command: DBMRFC
Parameter: exec_lcinit register
Name and Server     : LCQ - dusepierp12
DBMRFC Function     : DBM_EXECUTE
Command             : exec_lcinit register
Error               : DBM Error
Return Code         :     -24964
Error Message       : ERR_EXECUTE: error in program execution#
0,sap\lcinit LCQ register -uDBM , -uDBA , -uSQL ,
liveCache LCQ (register)
The liveCache state is ONLINE
DBMServer 7.6.04   Build 009-123-182-193
Creating liveCache application procedures
ERROR : liveCache LCQ not registered (see "s:\sapdb\data\wrk\LCQ\lcinit.log").
START *****************************
liveCache LCQ (register)
Thu 07/30/2009
10:26 PM
installation path = S:\sapdb\LCQ\db
OK
DBMServer 7.6.04   Build 009-123-182-193
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
Traceback----
Error----
sql.SQLError: [-4008] (at 1) Unknown user name/password combination
Traceback (most recent call last):
File "S:\sapdb\LCQ\db\env\lapps.py", line 38, in ?
    connectAndInstall (install, install.__doc__)
File "S:\sapdb\LCQ\db\env\installib.py", line 398, in connectAndInstall
    session = connect (options)
File "S:\sapdb\LCQ\db\env\installib.py", line 350, in connect
    alterUserNotExclusive(options)
File "S:\sapdb\LCQ\db\env\installib.py", line 338, in alterUserNotExclusive
    session.release()
AttributeError: 'NoneType' object has no attribute 'release'
ERROR : liveCache LCQ not registered
Thu 07/30/2009
10:26 PM
END ******************************
Many Thanks,
TIA,
Nisch

Nischal Mahakal wrote:>
> Hello Experts,
>
> After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
> -24964,ERR_EXECUTE: error in program execution
> 1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
> -
Traceback----
Hi there,
looks like you entered "DBADMIN" when you created the liveCache instance in DBMGUI as the DBM Operator.
For SAP installations, this user is always named "CONTROL".
So, drop the instance again, recreate it with "CONTROL" and re-do the recovery of the liveCache backup.
regards,
Lars

Safari 2.0.3 in OS 10.4.5 only remembers site user name/password 25%

In previous OS Safari behaved itself, but in this version the "do you want Safari to remember your user name/password" only works about 25% of the time.
Ideas/explanations? BTW I have never used the keychain.
I have just about given up and reverted to having the different names and passwords in Stickies and enter them manually-- what a PITA!
Rich
G4 Dig Audio 733mHz 1.5GB RAM Mac OS X (10.4.5) (laptop with same OS and same problems)

Problem solved by using Firefox.

User Name/Password for SQL*Plus

I installed the Oracle 8i Personal Version in my PC.
I have been trying to log on to the Oracle SQL*Plus screen, which asks me for the User Name, Password and the Host String.
Does anybody out there know what I should use here to log on to this screen?
Thanks in advance.
Jay
[email protected]

Hi,
Please check old mails and then forward questions.
User scott/tiger
DBA system/manager
SYS sys /change_on_install
with regards,
Boby Jose Thekkanath,
Dharma Computers(P) Ltd.
Bangalore-India.
www.dharma.com

POP3 -Keep asking for user name & Password

Hi,
We have exchange 2003 server with Service pack 2. We have user who check their mails through Outlook 2003, Outlook web access & some users are using POP3 to download the messages.
Since last few weeks, we are getting the complained that when engineers are trying to configured users account in Outlook with POP3 configuration, its keep asking for user name & password. But with same user name & passwords user is able to check their mail through Outlook web access.
In some of our site, users are able to download messages through pop3 account but this account was configured long back.
Kindly advise.

HI,
This is happening mainly when
1. user changed his password through Outlook web access next time its keep poping up for password & it will not accept the new passord.
2. if user is using OWA & when we try to configured his mail in Outlool with POP3 .
See if i remove exchange attributes from user's account & then delete the users from AD & Recreated with same user name, Password & reconnected to that user to his old mailbox, it;s work fine.
Regards,
Chetan
POP3 is enabled by default for all the users.

I don't know icloud user name&password to login iphone after update ios7

I don't know icloud user name&password to login iphone after update ios7.
I try to recovery apple i.d., but nothing.
I called Thailand service support 001800 4412904.
He advise me to goto http://expresslane.apple.com/, and send issue form to apple service.
I wait more than a week, but no reply.
I have purchased invoice and iphone package to confirm this phone is not stolen.
How could I do?
Thank you for your time to reply.

Unfortunately, the contacting Apple's express lane is all you can do, if you had no luck to reset your password on http://iforgot.apple.com/

Dynamic User Name & Password Creation

Hello,
In My Project I want to create no. of dynamic username & password as per user enters no of user he/she want to create.
For that i used database table's last auto-increment value and increment it to 1 & append it to 'st' for student(st+01)
so i am creating User name & Password Like st02 & st02 etc.
now my problem is when maxium limit of auto increment number is reached Usernmae & password repeats,so unique usernmae & Password creation not possible?
Is there any other way to do this other than using databse table's auto-increment field

Make sure the ID doesn't loop? An int(11) should provide MORE than enough possibilities. Be sure to use a long on the java side to hold the ID.

Auto-update: invalid user name / password

Hello,
I have changed out the CCO username and password for an IPS configured for auto-update but cannot get the IPS to correctly update its signature any longer. I have verified that the CCO login is correct and that it can download a signature file directly using a web browser interface. However, every attempt to get the IPS to update automatically results in the following error:
Auto Update Statistics
   lastDirectoryReadAttempt = 15:05:29 UTC Mon Sep 29 2014
    =   Read directory: https://72.163.4.161//cgi-bin/front.x/ida/locator/locator.pl
    =   Error: invalid user name/password combination
(Note: I have the URL set to 'www.cisco.com')
Thanks,

FYI - just to close my own issue.
The issue was resolved by using the cli to set the values and perform a one-time update. Once that was successful, all future signature updates have worked fine through the gui.

Invalid user name password

I am new to using databases and have just downloaded and installed oracle 11g XE to learn more about them, however, having started the database my problem is that I am unable to log in. I keep getting the message invalid user name/password
Can any one in the community solve this problem as I would love to learn more about databases, as I find it an interesting field.

set ORACLE_SID=<database name>
sqlplus / as sysdba
alter user <username> identified by <password>; -- change the password of the user and try connecting again with the new password

[-4008]: Unknown user name/password combination (MaxDB, Java)

Hey,
I'm having some troubles to connect to MaxDB using Java. I'm getting some error when I try to run my program.
import java.sql.*;
public class Hello
public static void main(String[] args)
     throws ClassNotFoundException, SQLException
          String username = "DBM";
          String password = "azerty";
          String dbname = "SAPDB";
          Class.forName ("com.sap.dbtech.jdbc.DriverSapDB");
          Connection connection = DriverManager.getConnection("jdbc:sapdb:" + dbname, username, password);
Exception in thread "main" com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4008]: Unknown user name/password combination
     at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:69)
     at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:768)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:434)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:325)
     at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:277)
     at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:81)
     at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:184)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
I checked the User and Password with the GUI (Database manager) and everything works fine.
I've also added the .jar in my Project Library.
Any ideas ?
Thanks

Looking at your screen shot, it seems the database instance itself hasn't been correctly created because you lack permissions to do so. Subsequently, all your connection attempts basically fail because the database does not exists. I'm no real expert in SAP MaxDB administration on Microsoft Windows, but I read about System Error 5 once in a while earlier, have a look at [http://www.syseva.com/2009/05/operating-system-error-5-5access-is-denied/|http://www.syseva.com/2009/05/operating-system-error-5-5access-is-denied/]. Overally, I suspect you don't have the permissions you need to have (operating system/file system -wise) in order to create the files belonging to a MaxDB instance (and/or required by the server and tools, such as the dbmsrv ... err file mentioned in the screen). Maybe you should check your system permissions? Are you administrator or member of the appropriate groups [http://maxdb.sap.com/doc/7_7/0e/218650d996419d91f6b234766eadd3/content.htm|http://maxdb.sap.com/doc/7_7/0e/218650d996419d91f6b234766eadd3/content.htm]? As pointed out, I'm no MaxDB/Windows expert, but this seems likely to be a problem as far as your screenshot is concerned.
Cheers,
Kristian

Dbanalyzer ERROR 25: SQLDBC error -4008, POS(1) Unknown user name/password combination (SQL state "28000").

Hello Gurus,
we have a unusual problem with our MaxDB 7.9.8.25
We want to check the parameter like discribed in note 1111426, but dbanalyzer throws the following error.
tttadm >/sapdb/TTT/db/bin/dbanalyzer -d TTT -u superdba,****** -f dbanalyzer_InstanceParameterCheck.cfg -o /tmp -i -c 1 -t 1,1
SAP MaxDB Database Analyzer, The Performance Analysis Tool, Version 7.9.08.25
Copyright 2000-2014 by SAP AG
ERROR 25: SQLDBC error -4008, POS(1) Unknown user name/password combination (SQL state "28000").
But with dbmcli we can connect with the same user.
tttadm > dbmcli -d TTT -u superdba,******
dbmcli on KBP>
Has anyone a suggestion?!

Have you tried, if you can actually do SQL with that user? Maybe there is a problem with the SQL authorization?
Does the following work for you?
>sqlcli -d tz79 -u dba,dba select * from dual
| DUMMY |
| ----- |
| a
1 row selected (1318 usec)
dbmcli -d tz79 -u dba,dba sql_execute select * from dual
OK
END 'a'

Upgrade to MaxDB 7.8 fails due to -4008,Unknown user name/password

Hello,
I have a strange problem. I try to update a MaxDB 7.7 instance to 7.8.
I start ./DBUPDATE.SH:
INFORMATION : This program upgrades the SAP MaxDB database instance
Do you want to continue the upgrade [Y] : Y
Check installation of C++ runtime
...execution 12:08:59
OK
IndepProgPath : /sapdb/programs
IndepDataPath : /sapdb/data
Please enter SAP MaxDB Name    [SID] : J93
Please enter SAP System Name   [SID] : J93
Please enter DBM User Name [control] : control
Please enter DBM User Password       :
INSTROOT        : /sapdb/J93/db
Authorization successful
DB KERNEL       : 64-BIT
DB VERSION      : 7.7.04 Build 28
Database instance version supported
PrivateDataPath : NO
Check availability of SAP users
...execution 12:09:05
SAP System Administrator   : j93adm
SAP Database Administrator : sqdj93
OK
SAP VERSION     : -4008,Unknown user name/password combination
Please confirm the upgrade start [Y] :
Obviously the DBM user and password have been accepted.
Also I created the xuser entry according to SAP note 39439:
xuser -U DEFAULT -u SAPJ93DB,password -d J93 -S SAPR3 -n minbbn30 -t 0 -I 0 set
xuser list
XUSER Entry 1
Key           :DEFAULT
Username      :SAPJ93DB
UsernameUCS2 :S.A.P.J.9.3.D.B. . . . . . . . . . . . . . . . . . . . . . . . .
Password      :?????????
PasswordUCS2 :?????????
Long Password :?????????
Dbname        :J93
Nodename      :minbbn30
Sqlmode       :SAPR3
Cachelimit    :-1
Timeout       :0
Isolation     :0
Charset       :<unspecified>
I can successfully connect to the database with SAPJ93DB:
dbmcli -u control,password -d J93 sql_connect SAPJ93DB,password
OK
So why can't I simply upgrade this MaxDB instance? Is there any logfile of DBUPDATE.SH with more information available?
Regards,
Mark

Hi Mark,
this error can be ignored (see note 1353266, section IV "Errors during the upgrade").
Continue the upgrade by answering the question
SAP VERSION     : -4008,Unknown user name/password combination
Please confirm the upgrade start [Y] :
with Y.
Regards,
Steffen

DSL user name & password

Similar Messages

Maybe you are looking for