DSL uses USB port - how can I connect BEFW router

DSL Modem connected to BEFW11s4 V.4 router and desktop computer connected port #1 to Ethernet card ...  wireless laptop and wired desktop worked fine.   Then Desktop stopped having a connection ...  wireless units worked fine.
Swapped Desktop cable to port #2 ....  Port #1 light remained lit although nothing was plugged in to it.  Port #2 light didn't light ... and no desktop connection.  Wireless still worked.
Connected DSL to desktop ethernet card ... didn't work (no router involved).
Connected DSL to computer thru USB prot ... desktop worked fine   however I saw no way to connect router so wireless would work.
I reset DSL, Router and deleted and re-installed the ethernet card .... reinstalled all software ...   no luck.
Should I gather that I have a router failure in the wired area and the wireless still be working?    I'm at wits end      Any thoughts would be appreciated
Thanks

in rural area .. no doubt about wireless signal being from my router.   I deleted and re-installed ethernet card (HP computer -- ethernet part of motherboard ... not separate card).  DSL to ethernet card failed ...  "failure to connect".
Used DSL to USB as a last ditch effort...   worked ...   but don't know a way to connect router if using DSL to Desktop thru USB port.
Could ethernet part of motherboard have failed?  and rest be working fine?
network connections shows ethernet card and 1394 icon.
ethernet card doesn't show "yellow triangle" in hardware set-up ... but status doesn't show an IP address, subnet mask or default gateway .....   1394 shows no action of any sort.
I may be hopeless ...   maybe a system restore might find what I'm missing??

Similar Messages

  • TS3274 How can I connect tv to ipad?  Want it to use netflex but will not connect using USB cable.

    How can I connect tv to ipad?  Want it to use netflex but will not connect using USB cable.

    http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
    You should find a solution here

  • TS1373 how can i connect my iphone to computer through usb using windows 8?

    how can i connect my iphone to computer through usb using windows 8?

    If iTunes is installed, you just connect the iPhone to USB.
    http://support.apple.com/kb/HT1386
    You can also sync to iTunes using WiFi.

  • HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

    HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

    First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
    Since you use the term "PC," are you using an Apple computer or something that is Windows based?
    Barry

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • How can I connect my Ipad Air to my PC to see the Ipad screen on the PC? I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. Thanks

    How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
    I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
    Thanks for any help! Regards

    Hi Rob - thanks so much for your help!  Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
    Do you use them on the Ipad or on the PC?
    Do I need a cable too and which one?
    Sorry... I am not very technical as you can see, thanks for your help.
    Regards

  • Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

    Dear Community,
    how can I connect SCSI tape recorder via USB to iMac ?
    Is there any adapter/converter on the market now ?
    Cheers, Marek

    Thanks Jan.
    Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
    I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
    Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
    Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
    My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
    Best regards,
    Marek

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • How can i connect to SQL Server 7.0 on Windons Using JDBC

    How can i connect to Microsoft SQL Server 7.0 on a windows enviroment ?
    in sql server 2000 some jar files are required that is
    What you need to do is actually add all three jar files to your class path individually. There are three jar files that come with this driver the msbase.jar, msutil.jar, and mssqlserver.jar. for sqlQ server 2000.
    now the problem is that i cant find these files on my system. firstly where these files will be located. secondly are they will be used to connect to SQL Server 7.0. thirdly if not what is the procedure.
    My next Problem is that I have Websphere Studio Application Developer. in which their is this facility of Database Webpages its like a wizard which makes automatically beans servlets and JSP but before that you need a Driver Name and and Class Name for to Connect to the Database.
    Can you tell what is the specific Driver Path for the Microsoft SQL Server 7.0 . secondly is this the class which is used to connect to SQL server 7.0 "com.microsoft.jdbc.sqlserver.SQLServerDriver" where can i find this one. for SQL server 7.0.
    please provide some guidance in this regard.

    You can search for the JDBC drivers at, http://industry.java.sun.com/products/jdbc/drivers
    All the three jars that you specified are part of MsSQL Server jdbc driver. You need them (in the classpath) to get connected to the database.
    "com.microsoft.jdbc.sqlserver.SQLServerDriver" is the class in mssqlserver.jar. This is the driver class which will be used to get connected to the database.
    You can search in this forum for writting jdbc code (for Sql Server). If you don't find these jars, give me your e-mail id.
    Sudha

  • How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    https://www.youtube.com/watch?v=72l_FLsXNAg
    I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
    also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

  • How can i connect 24VDC to digital input (usb 6008)

    hello,
    how can i connect 24VDC to digital input (usb 6008), is it possible with some optocoupler?
    thanks

    The 6008 is a static DIO, so speed shouldn't be an issue.  Therefore an optocoupler should work.  Just make sure you get one the meets your specs.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

    how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

    Yes, try to restore your iPhone from iTunes or iCloud backup.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Tell us the result if you will try.
    <Link Edited By Host>

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    Composite is analogue with one connector. That is why it is called composite
    Component is analogue with three connections. I think one for each color
    Here is the one for component. I misread composite for component
    http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

  • How can I connect to the database using ODBC within excel.

    Hi,
    How can I connect to the database using ODBC within excel and just refresh the data when needed.
    Thanks,
    Priyanka
    Edited by: user554934 on Jun 9, 2009 2:53 AM

    This is NOT an APEX relevant question, try posting it in the SQL/PL/SQL Forum..
    Thank you,
    Tony Miller
    Webster, TX

Maybe you are looking for

  • Custom resource/attribute not visible in FIM portal for non-admins

    hi all I have a problem I am not able to solve and hope somebody can help. We have created an custom Resource in the FIM portal called Customer. It is an User Resource Type and  attribute type customer, data type=reference. We have made this attribut

  • HT5057 iTunes account attached to debit card. How to use iTunes gift cards without charging debit card?

    Hey everyone! I have an iTunes account and attached to that account I have a debit card. I recently got some iTunes gift cards and would like to use them as the main source to fund purchases until they run out and then go back to using my debit card.

  • Default audio device resets to HDMI

    I have recently installed arch (again) and this time I used Pulseaudio. I have always used ALSA before. Now I cant get my system to remember Internal analog audio as my default audio device. It resets to HDMI at every boot/login. I have followed the

  • User Rights Regarding Voicemail Deletion

    As Microsoft has decided without our approval or notice, to prevent our deletion of and hold onto our personal and business voicemail for an indefinite period for their own direct access and review, I have decided to register formal complaints with t

  • Use Launchd to run shell script at boot

    Hello I'm trying to create a plist file that will run a shell script at bootup of the server. I have the following xml so far in the plist file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.a