Dsl with airport extreme.  Does it make my internet better, dsl with airport extreme.  Does it make my internet better

Is there any benifits to using a airport extreme insded of using my verison wireless router.  I know using usb is cool but for 150 dallors i don't know if it worth it.  Also just heard that there a new type of wirless internet called ac.  Should i wait for the airport to put that in there.

This is error message I get when I try to reconfigure the base station.
An error occured whie reading the configuration:
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)

Similar Messages

  • My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?

    My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?  Is the ethernet route less efficent that going throught the internet connection?  If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall?  Thanks for help on this!

    Ok, so are you saying that your Internet is or isn't working?  Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)?  If it is working this way, then a new modem isn't going to solve a problem with your Internet not working.  If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow.  If it runs fine this way and then slows back down when you go back through your router there is something else going on.  Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any?  Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

  • What is the best way to make 3g/4g simcard work with airport extreme

    I live in Mumbai, India and I am tired of the state of broadband connection over here. I have vodafone 3G Data only SIM with me which I use via a 3G dongle that plugs into my mac. It has a decent speed and I would like to use it as a primary internet connection across the 3 iPhones, 2 iPads, a Mac and 2 apple tvs at my home.
    I have a 2014 airport extreme and i want to know what hardware do i need to make the 3g sim work with it? like put the sim in the hardware/adapter and then plug it into the wan port of the airport extreme and let the AE handle my dhcp so that i can access 3g internet from all my devices?
    also, i was something 4g compatible as 4g is on the roll in India. it doesn't have to be a wireless router on its own but something that can dial the connection and provide internet access to the AE via the wan port.
    thanks.
    Neerav

    The only reason I mention it would be configure your network for a roaming instead of extended setup. The number one advantage over an extended is bandwidth performance ... aka speed.
    For example, I have a Cisco RVS4000 wired router as my main Internet router. I am fortunate that my 2-story home came pre-wired for Ethernet. I have placed an AirPort Extreme and a Time Capsule, connected by Ethernet back to the Cisco; one on each floor to provide a seamless wireless network for an assortment of wired/wireless clients. With this setup, I am able to stream HD TV content throughout the house. Mine is an example of what you can do with a roaming network.

  • How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    Thanks for the additional information.
    Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
    Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
    If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
    If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

  • Airport Extreme Base Station as bridge for Westell DSL router

    I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
    Here is the situation (I rent so chances are we will not be moving hardware anywhere):
    - Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
    - One lonely Powermac G4 upstairs that does not have a wireless card
    - One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
    I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
    I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
    I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
    When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
    I don't understand why the AEBS seems unable to see the DSL network.

    Hi,
    Well, what I have been able to do is this:
    I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
    As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
    Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
    Anyway, I digress...
    What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
    Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
    Best regards,
    Patrick
    Macintosh G5, Powerbook G4   Mac OS X (10.4.7)  

  • Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn)

    Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.

    Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
    If this is your "modem".......
    http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
    It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
    Does this device appear to be your "modem"?

  • Installing Airport Utility 5.6.1 in order to configure older Airport Extreme/g model doesn't work as it won't install with OS 10.8.5 Mountain Lion. Solution?

    I need to configure Airport Extreme Base Station 802.11b/g but Airport Utility 6.3.1 will not work. 
    I found this page:  http://support.apple.com/kb/HT5022
    it recommends installing Airport Utility 5.6 which downloads as 5.6.1
    but it will not install on Mountain Lion OS 10.8.5
    so what to do?

    AirPort Utility 5.6.1 is for Snow Leopard. Use 5.6 for Lion or Mountain Lion.
    You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
    Be sure to read the caveats at the end.
    Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
    Download Pacifist here: http://www.charlessoft.com/
    Download unpkg here: http://www.timdoug.com/unpkg/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
    Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
    Open Pacifist and from its File menu, navigate to the package and open it.
    Click the "reveal triangles" until you see AirPort Utility 5.6.app:
    Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
    The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
    If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
    Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

  • Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

    repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook  up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

    Diane,
    I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
    *+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
    Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
    All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
    If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

  • I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC.  Printer worked fine with Netgear previously.  With USB from printer direct to Laptop it will print.  The printer is definitely set up correctly to acknowledge the router.  W

    When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
    I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
    Can anyone offer advice?  Thanks.

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
    2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

  • Does JCE 1.2.2 make use of a certificate with an expiration date?

    Does JCE 1.2.2 make use of a certificate with an expiration
    date?
    If so, what's the date?

    The validation code which checked for certificate expiration was only found in JCE 1.2.1. It WAS REMOVED from JCE 1.2.2 and all successive releases like JCE in JDK 1.4.x and 5.x (and soon in 6.x). This expiration problem was the primary reason for releasing JCE 1.2.2 over three years ago. Export control regulations changed following the release of JCE 1.2.1, and Sun released 1.2.2 shortly thereafter so that customers wouldn't have this expiration problem.
    This change is documented as the first bullet in the change log for JCE 1.2.2, which is found both in the product distribution itself and on the following JCE product page:
    http://java.sun.com/products/jce/jce122_changes.html
    That said, JCE 1.2.2 is indeed signed with a certificate which is valid until October 2006, HOWEVER the JCE 1.2.2 and JCE in JDK 1.4.x/5.x code no longer checks that expiration date. All it cares about is that the code signature is valid.
    My understanding is that BOTH JDK 1.3.x and JCE 1.2.2 are slated for End-of-Life on March 30th, 2006, and will no longer be supported by Sun. Both should continue to work after that time, but will no longer be supported.
    I hope that helps clear the confusion.

  • Configure DHCP for Airport Extreme to see PPoE on a Nyxel DSL Modem?

    I would like to configure DHCP server for an Airport Extreme to see PPoE on a Nyxel DSL Modem?

    Please perform factory default reset on the AEBS as follows:
    Pull the power plug from the back of the AEBS
    Hold in the reset button and keep holding it in for an additional 8-10 seconds while you plug the power back in to the AEBS
    Release the reset button and allow 25-30 seconds for the AEBS to restart to a slow, blinking amber light
    Connect an Ethernet cable from the Zyxel modem/router to the WAN port (circle icon) on the AEBS
    Connect another spare Ethernet cable from your Mac to one of the LAN <=> ports on the AEBS
    Open AirPort Utility, select the AEBS, and click Continue to follow the guided setup as follows:
    Page 1 - Assign a device name and device password for the AEBS
    Page 2- Select "Create a wireless network"
    Page 3- Assign a name for the wireless network and a password for the wireless
    Page 4 - Select Bridge Mode if not already selected
    Page 5 - Setting should be Configure iPv4 Using DHCP. Not other info is needed
    Page 6 - Summary of settings and click Update
    Close AirPort Utility
    Test out the wireless by disconnecting the spare Ethernet cable and then clicking the AirPort icon at the top of your Macs screen to Turn AirPort On.
    Then click Join Other Network and Show Networks to locate your wireless network and log on using the wireless password
    You should be good to go

  • When an iPad is connected to the MacBook And the option says it will make a full back of the iPad to the computer does that mean ALL the files associated with apps on the iPad? If so where is the backup located on the computer?

    When an iPad is connected to the MacBook and the option in iTunes says it will make a full back of the iPad to the computer does that mean ALL the files associated with ALL apps on the iPad? If so where is the backup located on the computer?

    Yes.  http://support.apple.com/kb/ht4946

  • I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

    How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

    @Bennycui,
    Clean install here
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-77353
    Then install RapidBoot
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-77013
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

Maybe you are looking for