DSL wont work on a different jack
We recently moved into this new apartment and got the dsl service with Verizon. I noticed my apartment had only two phone jacks in the entire house - one by the kitchen and the other in our bedroom. I really would like to install my modem in my bedroom but the dsl doesnt work when connected to that jack. However it does work o when connected to the kitchen jack. So the only way I can use my internet is to have my modem / router setup in the kitchen, which looks really ridiculous. How can I get the other jack to work for my internet? I dont know if there is a handy trick that I can do myself or is it something my apartment maintenance can take care of or is it something that only Verizon can do? Simply want to move my modem to the bedroom instead of the kitchen, thats all.
As a note, if a telephone does in fact work when connected to the bedroom phone jack, it could be possible that at some point, someone used DSL in your apartment and had a homerun installed. A homerun is essentially a setup where your DSL signal is filtered out at the NID (Network Interface Device), and a single jack is chosen in your house to deliver DSL service.
Just a thought. There could be some other problems too like a polarity issue that might be bothering the DSL (unlikely, though), or the jack could just have a very bad connection to the copper line.
========
The first to bring me 1Gbps Fiber for $30/m wins!
Similar Messages
-
Why does my DSL stop working when I plug it into my filter?
This is really annoying. I was having problems with my phone/dsl connection and verizon sent me a filter. Great! I've been using the filter for a while now and the first problem was when I plugged in the filter then the dsl and phone the internet wa very slow. If we tried to watch a youtube video while the filter was plugged in it would be painfully slow!
Now the DSL wont work at all! The little green light disappears in the internet section whenever i plug the dsl into the filter. I work online and need both the phone and internet to work at the same time. Any ideas what to do?That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
========
The first to bring me 1Gbps Fiber for $30/m wins! -
USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?
OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.
-
Head phone jack messed up and wont work
My ipod headphone jack is messed up and it only plays out of one headphone and wont work on the other one what should i do to fix it? please help
yea... mine is the same way. it turns out i did some investigating on it and the entire jack is loose. when i push the jack backwards, both sides of my headphones work, but it is naturally forwards so only my left side works. and yes, i did try multiple headphones to confirm it isn't them. i might try and use a shim to keep it naturally back so both sides work, but haven't gotten around to it yet. your not the only one
-
i used a differant ipod to download a app and now my apple id wont work on my iphone how do i fix it?
ferrer.dave wrote:
i used a differant ipod to download a app
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
ferrer.dave wrote:
my apple id wont work on my iphone ...
What do you mean ? -
Spring is in the air, and right on cue my Verizon DSL stops working. AGAIN
Some background. I have Verizon DSL service, with a phone line dedicated to its use. The phone line is used for nothing else, and has the required filters attached.
Two years ago, when spring arrived, we began have trouble with out internet connection. Our modem would get a red light on the Internet connection. This would happen every day between 10am and noon, and would last from minutes to hours. I spent hours on the phone with Tech support. They reduced speed, which was unnacceptable and did not work. They sent a tech to our home twice that summer to replace lines inside the house, replace line outside the house, make adjustments at the central office and the local "hub". Nothing worked. Fall came, the issues stopped, and everything worked fine thoughtout the winter.
Last year, spring arived, we began to have trouble with out internet connection. Same thing as the previous year. Called tech support. Told them that I had done this song and dance the previous year. I would not start from the beginning with every single call, I would not turn off/on the modem, give model numbers, check direct lines from computer to modem. I had done it all the previous year. I thought surely there was some kind of record for my account that could be accessed. To no avail. I spent countless hours and days on the phone with tech support. I spoke with techs, supervisors, managers, talked, yelled, got nowhere. They sent a new modem. Nothing changed. They sent the same tech to my home as the previous year. He still didn't know what the problem was. Changed the phone jack. Changed a different line outside. Still didn't work.
I came on here and left a lenghthy message voicing my frustration. I was told that someone from the US tech support office would contact me (Executive Appeals). The representative from there was very helpful. He explained what each of the lights on the modem did and what blinking/not blinking/ off/red actually meant. He had them change the modem at the central office. Problem solved, I thought. We had out normal running speed of 3360/863 again. No more internet cutting out daily. But, it was fall. Apparently, this would have happened anyway. Because...
This year, spring arrived, and we are having trouble with our internet connection. We have any and all combinations appearing on the modem. The internet cuts out at all times of the day and night. It stays off for minutes to hours. Internet flashes, turns red, goes out. DSL and DATA blink, stay on, alternate blinking speeds. Sometimes the phone line has static, other times it doesn't. There is no pattern to anything.
I have not called normal tech support. The people in India are clueless, have never come close to solving the issue, and I will not waste my time and cell phone minutes talking to them. I saved the phone number and all information for the US representative I spoke with last year. I have left 2 messages for him over the past week. He will not return my call. Our internet speed had gone from 3360kbps/863kbps, to 2928kbps/860kbps, to 2560kbps/860kbps, to 2112kbps/860kbps over the course of the last week, as shown on the verizon modem page. This is what they do every year, and it in UNACCEPTABLE. Slowing the speed accomplishes nothing, since we still have the same problems. All that changes is we have DSL service that runs a little faster than dial-up.
If anyone out there has a suggestion as to what I can do to fix these issues after 3 years, please let me know. Apparently no one at Verizon knows how to address the problem.Verizon Reps,
I have not been to my private message thread "Spring is in the air, and right on cue my Verizon DSL stops working. AGAIN" since the beginning of June. The problems I was experiencing have not been fixed, but I was not posting because nothing was happening for a while. My Verizon Appeals rep was trying to figure out what to do.
She has since had 2 techs come to the house. The second one just recently. He changed something in the box a few blocks away. This not only didn't fix it, but has made the issue more prevelent than it was before. I would like to record all of our outages and lost connections, but the thread appears "closed".
At this point, I'm not sure it matters. The rep all but said that she has no idea what to do to fix it, or if it can be fixed. Fresh out of ideas, I guess. But I'd still like to keep track, since we have been without internet more than with for the last few days.
Thanks,
Theresa -
The new itunes update will not install properly and now itunes wont work at all
k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.
My issue is it wont even reinstall onto my computer
Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.) -
Mail-form from dB Masters + reCaptcha - Things wont work the way i want.
I used a mail-form from dB Masters because someone here gave me the tip.
And its great! But it uses a simplefied Captcha script.
I tryd to change the code myself and got to this: http://www.wientjesvoegwerk.nl/PHP/form.php
If you try to send mail it wont work.....
form.php
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Email Form</title>
</head>
<body>
<center>
<form id="form" method="post" action="../formmailer.php" enctype="multipart/form-data">
<input type="hidden" name="action" value="verify">
<table cellpadding="4">
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Uw naam:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Naam" value=""/>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Email:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Email" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Telefoonnummer:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Telefoonnummer" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Onderwerp:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<select name="Onderwerp">
<option value="0">Algemene Informatie</option>
<option value="1">Offerte</option>
<option value="2">Overige</option>
</select>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Bericht:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<textarea name="Bericht" rows="7" cols="40"></textarea>
</td></tr>
<tr><td align=right>CAPTCHA TXT</td>
<td align="left">
<form method="post" action="verify.php">
<?php
require_once('recaptchalib.php');
$publickey = "I hide the key on this forum dont know if its ok to show";
echo recaptcha_get_html($publickey);
?>
</form>
</td>
</tr>
<tr><td></td><td align="left">
<input type="submit" name="submit" value="Submit" />
<input type="reset" name="Reset" value="Clear Form" />
<input type="hidden" name="config" value="0" />
<input type="hidden" name="nospam" value="" />
</td></tr>
</table>
<div style="height:1px; display: none; visibility: hidden;">
<input type="text" name="email">
</div>
</form>
</center>
</body>
</html>
formmailer.php
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
$check_referrer="no";
$referring_domains="www.wientjesvoegwerk.nl";
// options to use if hidden field "config" has a value of 0
// recipient info
$charset[0]="UTF-8";
$tomail[0]="[email protected]";
$cc_tomail[0]="";
$bcc_tomail[0]="";
// Mail contents config
$subject[0]="Onderwerp van de Email";
$reply_to_field[0]="Email";
$reply_to_name[0]="Naam";
$required_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$required_email_fields[0]="Email";
$attachment_fields[0]="";
$return_ip[0]="yes";
$mail_intro[0]="Er is een bericht gestuurd vanuit Wientjesvoegwerk.nl:";
$mail_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$mail_type[0]="text";
$mail_priority[0]="1";
$allow_html[0]="no";
// Send back to sender config
$send_copy[0]="yes";
$copy_format[0]="vert_table";
$copy_fields[0]="Naam,Onderwerp,Bericht";
$copy_attachment_fields[0]="";
$copy_subject[0]="Kopie van uw bericht naar Wientjesvoegwerk.nl";
$copy_intro[0]="Dank u voor uw bericht!<br />Om veiligheidsredenen is uw email adres en telefoonnummer niet in deze mail te zien.<br /> Het volgende is verstuurd;";
$copy_from[0]="[email protected]";
$copy_tomail_field[0]="Email";
// Result options
$header[0]="";
$footer[0]="";
$error_page[0]="";
$thanks_page[0]="";
// Default Error and Success Page Variables
$error_page_title[0]="Errors:";
$error_page_text[0]="Ga a.u.b. terug naar de vorige pagina om alle benodigde velden in te vullen.";
$thanks_page_title[0]="Bericht verzonden.";
$thanks_page_text[0]="Dank u voor uw bericht!";
// Antispam Options
$empty_field[0]="nospam";
$character_scan[0]="Bericht,Naam,Email,Telefoonnummer,Onderwerp";
$time_delay[0]="2";
$captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
$max_urls[0]="2";
$max_url_fields[0]="Bericht";
$flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
$charset[1]="";
$tomail[1]="";
$cc_tomail[1]="";
$bcc_tomail[1]="";
// Mail contents config
$subject[1]="";
$reply_to_field[1]="";
$reply_to_name[1]="";
$required_fields[1]="";
$required_email_fields[1]="";
$attachment_fields[1]="";
$return_ip[1]="";
$mail_intro[1]="";
$mail_fields[1]="";
$mail_type[1]="";
$mail_priority[1]="";
$allow_html[1]="";
// Send back to sender config
$send_copy[1]="";
$copy_format[1]="";
$copy_fields[1]="";
$copy_attachment_fields[1]="";
$copy_subject[1]="";
$copy_intro[1]="";
$copy_from[1]="";
$copy_tomail_field[1]="";
// Result options
$header[1]="";
$footer[1]="";
$error_page[1]="";
$thanks_page[1]="";
// Default Error and Success Page Variables
$error_page_title[1]="";
$error_page_text[1]="";
$thanks_page_title[1]="";
$thanks_page_text[1]="";
// Antispam Options
$empty_field[1]="bait";
$character_scan[1]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$time_delay[1]="";
$captcha_codes[1]="";
$max_urls[1]="";
$max_url_fields[1]="";
$flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a-z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
function getIP()
if(getenv(HTTP_X_FORWARDED_FOR))
$user_ip=getenv("HTTP_X_FORWARDED_FOR");
else
$user_ip=getenv("REMOTE_ADDR");
return $user_ip;
// get value of given key
function parseArray($key)
$arrayvalue=$_POST[$key];
$count=1;
extract($array_value);
foreach($array_value as $part_value)
if($count > 1){$value.=", ";}
$value.=$part_value;
$count=$count+1;
return $value;
// stripslashes and autolink url's
function parseValue($value)
$value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
return $value;
// html header if used
function htmlHeader()
$htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
return $htmlHeader;
// html footer if used
function htmlFooter()
$htmlFooter="</table>\n</body>\n</html>\n";
return $htmlFooter;
// build verticle table format
function buildVertTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars(nl2br($cur_value));
else
$curvalue=nl2br($cur_value);
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
$message.=htmlFooter();
return $message;
// build horizontal table format
function buildHorzTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
if($send_ip=="yes" && $to=="recipient")
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars(nl2br($cur_value));
else
$curvalue=nl2br($cur_value);
$message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
$message.="</tr>\n";
$message.=htmlFooter();
return $message;
// build plain text format
function buildTextTable($fields, $intro, $to, $send_ip)
$message="";
if($intro != "")
$message.=$intro."\n\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars($cur_value);
else
$curvalue=$cur_value;
$message.="".$cur_key.": ".$cur_value."\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="Sender IP: ".$user_ip."\n";
return $message;
// get the proper build fonction
function buildTable($format, $fields, $intro, $to, $send_ip)
if($format=="vert_table")
$message=buildVertTable($fields, $intro, $to, $send_ip);
else if($format=="horz_table")
$message=buildHorzTable($fields, $intro, $to, $send_ip);
else
$message=buildTextTable($fields, $intro, $to, $send_ip);
return $message;
// referrer checking security option
function checkReferer()
if($check_referrer=="yes")
$ref_check=preg_split('/,/',$referring_domains);
$ref_run=sizeof($ref_check);
$referer=$_SERVER['HTTP_REFERER'];
$domain_chk="no";
for($i=0;$i<$ref_run;$i++)
$cur_domain=$ref_check[$i];
if(stristr($referer,$cur_domain)){$domain_chk="yes";}
else
$domain_chk="yes";
return $domain_chk;
// checking required fields and email fields
function checkFields($text_fields, $email_fields, $regex)
$error_message="";
if($debug==1)
$error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
if($text_fields != "")
$req_check=preg_split('/,/',$text_fields);
$req_run=sizeof($req_check);
for($i=0;$i<$req_run;$i++)
$cur_field_name=$req_check[$i];
$cur_field=$_POST[$cur_field_name];
if($cur_field=="")
$error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
if($email_fields != "")
$email_check=preg_split('/,/',$email_fields);
$email_run=sizeof($email_check);
for($i=0;$i<$email_run;$i++)
$cur_email_name=$email_check[$i];
$cur_email=$_POST[$cur_email_name];
if($cur_email=="" || !eregi($regex, $cur_email))
$error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
return $error_message;
// attachment function
function getAttachments($attachment_fields, $message, $content_type, $border)
$att_message="This is a multi-part message in MIME format.\r\n";
$att_message.="--{$border}\r\n";
$att_message.=$content_type."\r\n";
$att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
$att_message.=$message."\r\n\r\n";
$att_check=preg_split('/,/',$attachment_fields);
$att_run=sizeof($att_check);
for($i=0;$i<$att_run;$i++)
$fileatt=$_FILES[$att_check[$i]]['tmp_name'];
$fileatt_name=$_FILES[$att_check[$i]]['name'];
$fileatt_type=$_FILES[$att_check[$i]]['type'];
if (is_uploaded_file($fileatt))
$file=fopen($fileatt,'rb');
$data=fread($file,filesize($fileatt));
fclose($file);
$data=chunk_split(base64_encode($data));
$att_message.="--{$border}\n";
$att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
$att_message.="--{$border}--\n";
return $att_message;
// function to set content type
function contentType($charset, $format)
if($format=="vert_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else if($format=="horz_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else
$content_type="Content-type: text/plain; charset=".$charset."\r\n";
return $content_type;
// end global functions //
// begin procedural scripting //
// anti-spam empty field check
if($_POST[$empty_field[$config]] != "")
$empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
// anti-spam character scan check
if(strlen($character_scan[$config]) > 0)
$spam_message="";
$field_check=preg_split('/,/',$character_scan[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
$spam_message.="<li>This message contains disallowed characters.</li>\n";
// anti-spam time delay check
if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
if((time() - $_POST["time"]) < $time_delay[$config])
$time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
// anti-spam CAPTCHA check
if(strlen($captcha_codes[$config]) > 0)
$captcha_check=preg_split('/,/',$captcha_codes[$config]);
if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
$captcha_message = "<li>CAPTCHA test did not match.</li>\n";
// anti-spam max URL check
if(strlen($max_url_fields[$config]) > 0)
$max_url_message="";
$field_check=preg_split('/,/',$max_url_fields[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
preg_match_all("/http:/", $cur_field, $matches);
if(count($matches[0]) > $max_urls[$config])
$max_url_message.="<li>This message contains too many URL's.</li>\n";
// set anti-spam flagging option
if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
$set_flag = 2;
else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
$set_flag = 1;
else
$set_flag = 0;
// header injection check
$security_filter="";
if(strlen($_POST[$reply_to_field[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_field_checked=$_POST[$reply_to_field[$config]];
if(strlen($_POST[$reply_to_name[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_name_checked=$_POST[$reply_to_name[$config]];
// check domain referrer and continue
$domain_chk=checkReferer();
if($domain_chk=="yes")
$error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
// build appropriate message format for recipient
$content_type=contentType($charset[$config], $mail_type[$config]);
$message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
// build header data for recipient message
//$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
$extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
if($cc_tomail[$config]!="")
$extra.="Cc: ".$cc_tomail[$config]."\r\n";
if($bcc_tomail[$config]!="")
$extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
if($mail_priority[$config]!="")
$extra.="X-Priority: ".$mail_priority[$config]."\r\n";
// get attachments if necessary
if($attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$extra.="MIME-Version: 1.0\r\n";
$extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
else
$extra.="MIME-Version: 1.0\r\n".$content_type;
// send recipient email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
else if($debug==0)
if($set_flag == 1)
$subject = $flag_spam[$config]." ".$subject[$config];
else
$subject = $subject[$config];
mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
// autoresponse email if necessary
if($send_copy[$config]=="yes")
// build appropriate message format for autoresponse
$content_type=contentType($charset[$config], $copy_format[$config]);
$message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
// build header data for autoresponse
$copy_tomail=$_POST[$copy_tomail_field[$config]];
$copy_extra="From: ".$copy_from[$config]."\r\n";
// get autoresponse attachments if necessary
if($copy_attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$copy_extra.="MIME-Version: 1.0\r\n";
$copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
else
$copy_extra.="MIME-Version: 1.0\r\n".$content_type;
// send autoresponse email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
else if($debug==0)
$send_copy = 1;
if($copy_tomail=="" || !eregi($regex,$copy_tomail))
$send_copy = 0;
if($send_copy == 1)
if($set_flag == 1)
$copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
else
$copy_subject = $copy_subject[$config];
mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
// showing thanks pages from a successful submission
if($thanks_page[$config]=="")
echo "<h3>".$thanks_page_title[$config]."</h3>\n";
echo "<p>".$thanks_page_text[$config]."</p>\n";
if(strlen($debug_text) > 0)
echo "<p><b><i>".$debug_text."</i></b></p>\n";
else
header("Location: ".$thanks_page[$config]);
else
// entering error page options from missing required fields
if($error_page[$config]=="")
echo "<h3>".$error_page_title[$config]."</h3>\n";
echo "<ul>\n";
echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_message.$max_url_message;
echo "</ul>\n";
echo "<p>".$error_page_text[$config]."</p>\n";
else
header("Location: ".$error_page[$config]);
else
echo "<h3>".$error_page_title[$config]."</h3>\n";
// message if unauthorized domain trigger from referer checking option
echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
echo "<h3>Error</h3>";
echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
include($footer[$config]);
ob_end_flush();
?>
verify.php
<?php
require_once('recaptchalib.php');
$privatekey = "i hide this on the forum";
$resp = recaptcha_check_answer ($privatekey,
$_SERVER["REMOTE_ADDR"],
$_POST["recaptcha_challenge_field"],
$_POST["recaptcha_response_field"]);
if (!$resp->is_valid) {
// What happens when the CAPTCHA was entered incorrectly
die ("The reCAPTCHA wasn't entered correctly. Go back and try it again." .
"(reCAPTCHA said: " . $resp->error . ")");
} else {
// Your code here to handle a successful verification
?>
We have a saying in the Netherlands; "Not being abled to see the tree's trough the forest"
Well i dont see it anymore...
I managed to get it in the code but it doesnt work.
I hope someone can help me out!@Nancy O.
Thanks for your support i appreciate it that you helped me out a many times.
However i have read all of the topics you posted.
I know in the mail form i can disable the "sort of Captcha". I wanted to disable it and insert reCaptcha instead.
I will re-make the form because like you said (and i already figured it out myself) ;
"b) Don't modify forms until you get a very basic form working on your server."
And youre right, im taking too much work at once.
@CowboyInAZ
Im a hobbyist that learns really really fast.
Before March 23 i never used CSS, Javascript and XHTML. And never combined them all together with PHP. (never ever created a php based file from scratch)
The reason why i use other persons code is because i learn faster with examples, and because i dont need to reinvent the wheel if someone already invented it. The only thing i do with it is learn the workings, customise it and at last, rewrite the code when i understand it.
If you look at my current site: http://www.wientjesvoegwerk.nl/
You will notice that the site is validated by W3C with no errors and warnings.
I think it was Nancy O. that gave me the link to the validator. Thats how i discovered the service.
You need to know that in 1 day (from 63 errors and 12 warnings) i removed all errors. And i didnt knew much about it, and why errors happend while the site looks fine.
So im just curious how things work and thats why i "steal" codes and adjust them to learn myself.
I also want a education like you spoke of, but im interested in a different media.
I want to be abled to create my dream project wich involves new ways for game studios to earn money.
This is just a simple start, im also taking tutorials in C#, C++. -
my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please
This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock -
Built in Isight wont work with IChat
I have the New Macbook and i have used Ichat Video before but now it wont work, i get this message:this computer dose not support video conferencing
anyone help?Adequate.
The Upload is acceptable.
iChat will fail at 50kbps (In Video chats with a message)
The Lowest Spec Apple Suggests for 1-1 Video is 100kbps
The lowest Apple Spec for 3 and 4 way Video chats is 384k but I have done passable ones at 256k.
If System Preferences > Quicktime > Streaming is left at Automatic in Leopard iChat reads this as 384k (it should be set to 1.5Mbps and iChat restarted if Changed)
Have you tested at different times ?
IS that the Best speed with the service you have ?
Is that speed near what they say they are selling you ?
The Speeds you quote should not get you the Too Slow Info message.
Is that Internet Connection shared with other computers ?
Were you doing a download ?
Both will effect the amount of the Speed (called Bandwidth) that you get.
Think of a Freeway as you enter a city in rush hour. It might be a road you can do the national speed Limit but you may not be able to go that fast due to other traffic.
12:34 PM Monday; January 19, 2009 -
Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything
bluztoo wrote:
Haven't really used any of them including VLC - actually use netflix on the ipad more than anything. I was able to drop an mp4 into imovie on my ipad and see it there. This was something I had shot as avhcd and converted with turbo.264. Played fine. Probably not what you want for a movie player though.
Well, turbo.264 is indeed very nice to have - even for converting full-sized movies. (Nevertheless, TechRadar's latest roundup (see http://www.techradar.com/news/software/applications/6-of-the-best-video-converte rs-for-mac-1074303 ; also linked from another roundup at http://www.iphonelife.com/blog/87/benchmark-excellent-multimedia-converter-handb rake-vs-commercial-apps ) has shown it's still worse than HandBrake in most respects.)
All H.264 files (assuming they are H.264 level 4.1 or lower) are compatible with the built-in Videos app.
bluztoo wrote:
Those of you who use other players, what do you reccomend? Just curious.
It entirely depends on your needs. The top players (AVPlayerHD / ProPlayer, It's Playing, GoodPlayer) all have different strengths and weaknesses. I myself use It's Playing the most as I convert everything into MP4 and simply love the DSP's (brightness / volume / saturation boosting). (Its software decoders are definitely worse than those of AVPlayerHD / ProPlayer; however, MP4's are played back from hardware.) -
Lightroom wont work in Internet Explorer, flash broken
After making a picture page in lightroom and exporting, it will load perfectly in Firefox but not IE.
When opening the lightroom page, the following message is displayed:
This photo gallery requires the Adobe Flash Player.Get the free Flash Player here
It doesn't actually update, or rather the update does nothing, with IE not being able to load lightroom. I thought it could have been vista, but after moving it to another computer (XP) internet explorer can not open the page.
My fear is that some HR rep will try to view a portfolio in IE, it wont work, and then lightroom is pretty much worthless.When you find lists like that getting too long, it means -
1. You are not using CSS optimally, and
2. You are using too many fonts
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"The Scribe" <[email protected]> wrote in
message
news:ejvnq8$cj6$[email protected]..
> ok i'll have a look at validating it. yeah i realise i
have been a bit
> sloppy
> on the CSS side, ive been creating it on the fly just to
get it up online
> n
> looking like it should really. im gunna go back later n
neaten it up a
> bit,
> using the header tags and better labels.
>
> the images are very heavy too so im trying to optimise
them. I created
> seperate style sheets to deal with the seperate colours
because the list
> of
> different fonts etc was getting a bit long, but i
suppose i shouldnt have
> worried.
>
> Cheers ill have a look at it
> -
inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model
Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I just got a new casette adapter for my car a couple weeks ago and now it wont work. This is very strange since headphones will still work in the headphone jack but the casette adapter does not.
Any thoughts?Hello,
It needs a sufficient power to complete the Restore process, therefore, you are asked to plug your iPod with a Charger. You can try the following
1. Borrow a charger from a shop for a favour of friend
2. Find a iPod car charger
3. I am not sure as I have not tried myself but please take it as a refencer, I believe that it is worth to have a try
http://www.bearsdriving.com/blog/archives/2005/10/youripod_tipo.html -
I cant get my microphone to work, it worked fine last week. I tried a different mic and it still wont work. So I think its my laptop.
I reinstalled my sound card and made sure it wasn't muted.What laptop model and operating system? Also, if you know how, go into Device Manager and check for the Conexant Pebble High Definition chip. If you have that and Win 7, your microphone will continue to not function. You can work around it by using a USB microphone. HP keeps telling all of us that they are working on a "fix" and it will be out soon. I'm not sure what their definition of "out soon" is because many people have been waiting months and months.
Maybe you are looking for
-
Videos no longer supported since Lion upgrade
Since upgrading to 3.1.3 and Lion videos are no longer supported in Aperture. Is there a solution to this?
-
Why are tab canvases effectively implemented as stacked canvases? It seems crazy that you have to first create a "content" canvas (which will never have any items placed on it) on which to display your tab canvas! I want to create the layout where I
-
Tried downloading to version 11.1.1 and I get an error message
Error message says the installer has insufficient privileges to access this directory: (lists the directory). The installation cannot continue. Please log in as administrator or contact your system administrator. I don't know where to go from her
-
I have a new mac mini with a vga/dvi adapter to an older hitachi crt monitor. The display will go pink at times when the monitor cable is touched .I have repeatedly checked the adapter interface and the adapter fittings are screwed down tight. Is thi
-
Materialized views are showing up under Tables in SQL developer 2.1.0.63
Please, Is there any setting to not display materialized view objects under the Tables in sql developer 2.1.0.63 ? This was not happening in previous versions. Thanks.