Dslr footage with Black magic intensity - playback stops at every new clip

Every time the play head reaches a new clip it just stops.
If I don't use a black magic sequence it plays fine.
Is dslr footage too much to handle when using a black magic card?
MacPro 8 core 3ghz.
PP 5.2.2

If you have installed the latest BM drivers than I think your evaluation of the card is valid 

Similar Messages

  • Black Magic Intensity Pro Play only Audio when edit in CS 5.5

    Hi i have an problem, when i try to edit with Black Magic Intensity Pro in premiere CS5.5
    i can play only Audio but not Video so i check settings on Premiere and control panel for
    Black Magic Intensity and everything is OK and i check connections the preview is connect
    via HDMI cacle and Composite Video/Audio and in both cases i get only Audio but no Video
    so what is the problem? An driver for Black Magic Intensity Pro issue or what?
    Current driver version is 8.2.1
    Thanks.

    Thanks i already do that and nothing,again only audio no Video.
    I tray to play with integrated software Media Express who comes
    with driver and working good.
    So what is the problem the driver or Premiere CS5.5?

  • Black Magic Intensity Pro not shown in CS 5.5

    Hi i need some help,before i use a CS5.5 i tested CS5 with Black Magic Intensity Pro and all go Ok. And then when CS5.5 shows up i instal CS5.5 but i can,t see a bin to edit with  Black Magic  i see all other various bin to edit but not with  Black Magic. Why is that so some plugins or some bug in CS5.5?

    Yes normaly like on CS5 it,s not my first time to
    instal ,then you go to control pannel to make setings

  • Black magic intensity pro and fcp 5.14

    hi i just installed a black magic intensity pro card to my system since i was having real bad times caputuring anything without dropping many frames and not good video using my sony hdr-fx7 camcorder. well now i get general error 34 messages when i click on audio-video settings. any one with this card can help me please. yes i only have 2 gigs of ram at the moment but i'm getting 2 more are coming today. i should still be able to use my s.d. camcorder and caputure sd footage right?
    i tried my autosave vault files, but it still pops up with the general error 34 message.
    thank you

    +thanks for all replies.i installed 2 more gig of ram making 4 and the error 34 still shows+
    Maybe nobody replies because nobody has a solution for your problem...
    Anyway... I think the best way to solve the problem is to contact the Blackmagic support since it could be an issue related to their product rather than an FCP issue...

  • Black Magic Intensity Pro Card & Final Cut Studio

    I'm in the process of purchasing a Mac Pro to use for my New Wedding Video Business. I have purchsed the New Sony HVR-HD1000. I'm looking to get everything at one time and something has me very confused. I hope that someone can please help me.
    As I understand it. I take my New Sony HD Cam via Firewire800 and Final Cut Studio will just suck it all in.
    If thats the case, What is the need for products such as the "Black Magic Intensity Pro Card"?
    Do I need it when my Mac Pro/Final Cut will import my footage anyways?
    Please help me make a sound decision.
    Thank you for your time.

    No disrespect taken. I might not be very technical but some times I wonder if I'm doing the right thing.
    Maybe some history will help explain my situation.
    I have a old cheap-o hand held Sony SD Mini DV Cam that I used all year to puts around with. As a test of my skills went to weddings and events for fun. All of these events had "Professional Videographers" I was just here for fun with my little camera.
    For fun I would turn in my little DVD and the response was incredible. Even though my footage sucked compared to all the "Pro Cameras" being used it was my skills in editing, having fun with the video, and using lots of Motion graphics and titles. I became so popular that people wanted me to actually film events as a paid rig!
    With no training what so ever and just tinkering with Final Cut Studio - I have a long list of "word of mouth" gigs with people waiting for me to film for them.
    My parents then decided to give me a few gifts. (1) Sony HVR-HD 1000 and (2) JVY GY100HD Cameras. I now have all the gear I need. I never owned cameras like this before so as I started looking into getting a Mac Pro - All these questions came to mind.
    My point is - I used a POS camera and consumers ate it all up. I didnt worry about "Color Space" or ProRess anything. I just imported as DV - edit the footage - have fun with it - burn it on DVD and call it a day.
    I'm just seriously asking - now that I have nice cameras that didnt cost me a dime - cant I just continue the same way I have been with my POS camera?
    Is anything more than just Firewire800 to my Mac really that critical for Weddings on SD DVD's?

  • Black Magic Intensity Pro Card

    I'm in the process of purchasing a Mac Pro to use for my New Wedding Video Business. I have purchsed the New Sony HVR-HD1000. I'm looking to get everything at one time and something has me very confused. I hope that someone can please help me.
    As I understand it. I take my New Sony HD Cam via Firewire800 and Final Cut Studio will just suck it all in.
    If thats the case, What is the need for products such as the "Black Magic Intensity Pro Card"?
    Do I need it when my Mac Pro/Final Cut will import my footage anyways?
    Please help me make a sound decision.
    Thank you for your time.

    A few things to remember:
    The best resolution you will get with your HD camcorder is to record LIVE from the camera to the Intensity card connected via HDMI. No compression (HD to HDV) will occur in the camera before the computer sees it. You can either record uncompressed (best) or have FCP/Premier record with a codec (422, etc.). 422HQ is supposed to be "visually" the same as uncompressed HD but requires significantly less space. Recording HD uncompressed REQUIRES Raid disk setups. Depending on your setup, you may require Raid with with 422. The down side for this highest resolution mode is you MUST have your computer hooked up to the camcorder via HDMI to the Intensity card while recording! Not typically feasible when doing live events and being mobile with your camcorder.
    The second best MAY be playing back the recorded video (HDV compressed onto the tape) via the HDMI (not firewire) to the Intensity. Here it depends on the quality of the codec INSIDE the camcorder vs. the software codec in the computer. The advantage with an Intensity card here is that you can record onto the computer using a more "editable" format (see below).
    The third best (may be just as good as the second above) is to transport the recorded video (HD compressed) via firewire from the camcorder directly to the mac. The only difference from two above is how good the software codec on the mac is compared to the camera. Opinions vary here.
    Editing the DV/HDV directly is often near impossible - meaning it must be recorded (converted) on the hard disk in a more editable format. Long GOP issues arise often/sometimes with DV/HDV (MPEG 2).
    Method 2 and 3 allow for portability. Method 1 is NOT portable/mobile.
    G

  • What is the BEST cable connection from Canopus ADVC 300 to Black Magic Intensity Pro HDMI PCI Express Capture Card?

    I must connect an ADVC 300 to a Black Magic Intensity Pro HDMI PCI Express Capture Card.   For best quality, which cable should I use?
    On the ADVC 300 there are outputs of firewire, S-VHS and RCA.
    On BMPro it's a little confusing. On the breakout cable there are connectors that say:
    -5 B-Y OUT
    -4 Y OUT
    -3-R-Y OUT
    -7-R-Y IN
    -8-Y IN
    -9 B-Y IN
    -15 AUDIO IN RIGHT
    -10 AES/EBU OUT
    -12 AUDIO LEFT OUT
    -14 AUDIO LEFT OUT
    -13 AUDIO RIGHT OUT
    With the BMPro, there is also a separate, shorter cable.  On one end it looks like S-VHS and on the other there are two connectors, one black and one blue.
    On the actual BMPro Express card strip instead of using the breakout cable, there is HDMI IN (and HDMI OUT). 
    How should I connect this?  Is there an adapter cable of FIREWIRE TO HDMI? 
    Any help is much appreciated. 

    Well, when I researched how best to digitize VHS (into Final Cut Pro 7), I learned two of the best devices to use are BMPro and Canopus ADVC 300.  I’m using the ADVC 300 for the built-in time base corrector.  I definitely want to use that to stabilize the video.  I also read how well BMPro improves image quality.  So, I thought to use the two together must produce outstanding quality (well, as good as VHS can be). 
    Perhaps I got confused into thinking I can use both.  But the BMPro appears to have an S-VHS adapter. 
    I guess I’m wondering what is better quality: 
    Run the firewire from the Canopus ADVC 300 converter directly into the firewire port on the Mac Pro
    Or, run an S-VHS cable from the Canopus ADVC 300 into the BMPro Capture card
    (I should mention that I have purchased all these items and already have the BMPro Card installed so at this point it’s not a cost issue, but rather an issue of simply which works best?)

  • Black Magic Intensity Pro output issues in FCP7

    I just installed a Black Magic Intensity Pro in my office's edit/mix computer. I cannot get FCP7 to output video correctly. The monitor auto senses the HDMI output settings correctly (matching what I have chosen in FCP) but I only get a freeze frame of the last frame when I hit stop.
    I have tried every frame rate/resolution setting and it will not work. I've reinstalled FCP7 and the Intensity (newest drivers from the website).
    Any help is welcome!

    View > External Video > check All Frames.

  • Black Magic Intensity Pro  Driver  for CS7

    Can anyone advise (from positive  experience)  ...which Black Magic Intensity Pro  Driver is working for them in CS7?
    Thanx

    Thanx Jon.
    9.7.5 is the latest.
    Will try it with a degree of confidence.
    Did you delete or disable previous BM driver prior to installing this one ?
    Is it working in CS6 as well?
    EDIT:  FWIW...Now installed....Works fine for me as well.

  • No preview codec, crashing on start up, no audio with black magic, asking for serials

    Hello,
    I have 4 issues with Premiere CC. At work we have a school license of some sort, what I know we got a special design one from the  sales team (I might be wrong).
    The problems we have runned into are:
    1. We students try to open a project they been working on a error screen popps up and says something like "No preview codec could be associated with this sequence...."
    I think this happens when students have merged audio and video toghether.
    2. I got some help from the tech support and they made some changes in the libiry in one of the editing rooms computers and reinstalled premiere Pro CC.
    It seemed as everything was working until I opened premiere CC the day after, and it asks me for a serial key. I tried putting in the serials we got and non of them worked.
    I also tried logging on to the account we have and it still asks me for the serials. And when I try starting in in trail mode I can't playback anything.
    3. In another editing room Premiere was crashing on start up, so I was told by the tech support to uninstall all adobe softwares and update my mac OsX and then reinstall the softwares needed. It worked but if i save projects and try to open them up Premiere CC craches.
    4. On computers using black magic deck link I can't get audio out from premiere pro.
    I would really appreicate if I could get some more support.
    Thank You
    Viking Jonsson

    Hello again,
    So the sound issue is solved, so for other users with the same problem I will write down my way of making it work.
    I read some time ago that someone made it work by starting AE and in AE more choices were avalible in the audio prefrences, but this didn't work for me but it might for some, thats why I write it here.
    I took this a step futher and I opened up Audition CC, and in Audition CC the sound worked just fine and it was automatically set to black magic.
    After I had open Audition CC I was then able  to select Premiere Pro 7.0 as the sound output in the Apple system settings sound prefrences.
    Then the sound worked fine in AE and PP. Should also note that when I did it as said in the manual I didn't get it to work.
    The preview preset issue is some what solved, I reinstalled premiere and upgrade my OSX as written above. First time I installed Creative Cloud I did it from a build from a hardrive I think that some how made it so creative cloud could not reach premiere correctly???
    Although I still have the problem with serial numbers sometimes and I have to be logged on wich is don't work if i try to log on with the account on two or more computers.. Even thou we have a school license, so I still appreciate all help I can get with this.
    I will also add that I heard that strange things can happen if users install apples latest ProApp QuickTime Codec 1.0.4 so watch out for that one at the moment, I sure adobe will fix this soon as well

  • Black Magic Intensity Thunderbolt interfase is not recognized

    I am trying to adapt the little box interfase Intensity from Black Magic throught the Thunderbolt port althought it is recongnized by my iMac system, Final Cut 10.0.3 doesn't. I followed the insctrucctions that seems simple: connect the thunderbolt cable into the iMac thunderbolt port, the other extrem into the thunderbolt port of the interfase and then connect an HDMI cable from the out port into the HDMI in port of the external monitor, select  the A/V option in the FCX ......and that's all!!!....but nothing happens....the signal is not recognized in the monitor....I tested with After Effects application and it does sends out the signal to the external monitor.
    Am I doing something wrong or is there a codec or software that I have to install additional? 

    probably need to speak to Black Magic as they write the drivers for their stuff to work with fcpx
    adam

  • CS6 Premier Pro and Black Magic Intensity Pro not working?

    Hi,
    I am using the trial version of CS6 Premier pro. First the Playback settings in the drop down menu next to the viewer is greay out. Second, when I go into the playback setting through the settings menu I dont see the Black Magic as an option to send my signal out to. Is this a limitation of the trial version?
    I have updated everything and the Black Magic works perfect with my CS5 and Final Cut Pro.. Any clues?

    Hi Javier,
    The new Mercury Transmit plug-ins from Blackmagic and other hardware partners are selected in a different way than the previous player plug-ins from CS5.5 and earlier.  To turn on transmit, go to the Preferences, in the Playback area.  There, if the plug-ins for your third-party hardware are installed correctly, you'll see options for the Audio Device and Video Device.  Once you select the third-party hardware there, it can be used across sequences and projects.  If the transmit plug-in provides a setup dialog for additional options, you'll see a small setup option on the right side of the Video Device option.
    And of course, make sure that you have applied the latest CS6 updates, and are using the latest installer from Blackmagic for CS6.
    Cheers,
    Zac

  • Setting Premiere Pro with Black Magic extreme Tunderbolt/HDMI

    Normally I work with Avid but, like everybody else, I think Premiere Pro holds the future. So I am working on that.
    Question is, I have a Black Magic Extreme with Thunderbolt connected through my Pegegasus raid system. With Avid it works BUT with Premiere Pro it doesn't. So what am I doing wrong?

    Hi,
    I recommend watching this how to setup Blackmagic with Premiere Pro video if you haven't already.
    Black Magic Design I/O Hardware Setup for Premiere Pro CS6 - YouTube
    If you're still having troubles getting Blackmagic hardware working please let us know and we can run through other steps.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • FLME compatible with Black Magic Card?

    Hello
    Does Flash Media Live Encoder is compatible with the cards :
    acquisition card BLACK MAGIC DESIGN DeckLink Studio
    acquisition  card AJA KONA-LHe
    Someone has already tested?
    Thanks for your Help
    Best regards
    Jerome Hutain

    Thanks
    I found this information on OSMF website
    Now, i am sure it works.
    Thanks for your help
    Best regards
    Jerome
    *"Additional Capture card certification: Blackmagic
    Decklink<http://www.blackmagic-design.com/products/decklinkhdextreme/>+
    AJA Kona
    (formally Xena) <http://www.aja.com/products/kona/index.php>"*
    2011/4/15 tarnic86 <[email protected]>
    In my opinion, if the driver of your new BlackMagic card are compatible
    with your operative system, and installed correctly, FMLE uses it as any
    other peripheral, so it should work.
    Maybe you can ask to their support to be sure...
    >

  • Capturing at 24 fps with Black Magic Decklink Studio

    I keed capturing video at 24 fps.  I would rather be at  29.97 fps. How do I get to that level.  The black magic is set to NTSC.

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

Maybe you are looking for

  • Authorizations & Roles in ISA

    Hi, FIRST PART - USER ADMINISTRATION      I have a requirement where in I have to add a new authoization (fo providing "User is approver" role) . What are all the necessary things to be done to add a new role/authorization to pop up in role list whil

  • FlvPlayback: how to know when buffer is full?

    HI, I am using a FLVplayback component and I would like to know, after setting the .contentPath, how I can tell when the buffer is full or what percentage of the video is loaded? I would like to hide the controls until a certain amount of video is lo

  • Password to update RSS feed

    Hi, Since a few months I've been getting this little pop-up window asking for a name and password to update RSS feeds (see below). This window did not appear before and the problem is that (1) it does not accept my .mac password and (2) I don't know

  • What is 'devoloper' below the music in finder?

    I need help

  • What is Self Referencing Synonym?

    Who can explain to me with an example? I searched from metalink and google, can get much useful information. Thanks!