DSLR import and other updates

I just uploaded a short video to my web site on the important change to importing for DSLR shooters in 10.0.6.
http://fcpxbook.com/DSLRupdate.html
I'll also be putting up changes and updates for my book soon. I'll also be shooting an update fro my Class on Demand training next week, which I hope will be available soon.
Thanks.
I stand to profit from this message.

Thanks Tom for this tutorial. You have been an immense blessing in these forums and all members have profited from your precise and knowledgeable answers. All wishes for you books and updates.

Similar Messages

Firmware and other updates

I have a MBP purchased 11/1/07. I run and install Software Updates as they are offered. How can I determine what firmware update or updates, and other unknown update or updates are for my computer?

See EFI and SMC firmware updates for Intel-based Macs.

CS6 - How do I stop it from crashing on import and other times

Hi, I am a long time Premiere user and just installed CS6 Production Premium on a clean Windows 7 machine (i7, 32 gigs RAM). I'm encountering problems importing clips- the program freezes randomly and I have to CTRL-ALT-DEL to get out. It took me a half hour to successfully import 10 clips (all stock PRORES clips which should not be an issue). I have gone through many posts but can't seem to find this issue.
All drivers are updated, and I have the latest version. This system is totally clean and I even disabled antivirus as some users experienced conflicts.
Thanks for any help.

I had the Integrated Gmail 2.5.5 addon enabled.
After disabling the addon the problem is gone.
Hope it works to you guys.

Hotfixes and other updates

I administer several Cold Fusion servers, most are at 8.0.1.
A developer pointed me to a fix for a problem she was experiencing.
That page is at
http://www.adobe.com/go/kb403411
The title is "Patch for CFImage and Image functions in ColdFusion
8.0.1". The text repeatedly refers to this patch as a "hotfix", and
the procedure to apply the patch is the same as for a hotfix. yet
the patch is not listed or mentioned anywhere on the Cold Fusion
updates page, at
http://www.adobe.com/support/coldfusion/downloads_updates.html
Why is this hotfix not listed on the COld Fusion updates
page?
Most importantly, how can I stay on top of hotfixes, patches,
etc.? Going to the updates website isn't a good plan, especially if
all the updates are not listed.
Thanks!

mkane1 wrote:
> the patch is not listed or mentioned anywhere on the
Cold Fusion updates page,
> at
>
http://www.adobe.com/support/coldfusion/downloads_updates.html
>
> Why is this hotfix not listed on the COld Fusion updates
page?
Because it is listed on the hot fix page.
http://www.adobe.com/go/kb402604
>
> Most importantly, how can I stay on top of hotfixes,
patches, etc.? Going to
> the updates website isn't a good plan, especially if all
the updates are not
> listed.
I feel your pain. I have often been confused by ColdFusion
patching and
updates.
As best as I can understand the process. Individual or small
groups of
related fixes are first released as a hot fix. These are
listed on the
page I linked for CF8. There are related pages for each
version.
Periodically all released hot fixes are packaged up into a
Cumulative
Hot Fix which is listed on the page you where looking at.
It has always been my understanding to the recommendation is
to only
install hot fixes if one is experiencing the problem
addressed by the
hot fixe.
If they every do an actual Update this is also listed on that
page, but
this is a major fix and results in a different version number
for the
product. And becomes what is downloaded into the future.
I am not finding the link at the moment, but in a previous
job I would
receive e-mail notices when hot fixes, cumulative hot fixes
and updates
where released.

Downloading flash player 8 and other updates and get an error...

Recently when I've tried to download updates to Norton Antivirus and today when I wanted to get flashplayer *8 it won't let me do it, this is the message I get after I pressed the download button.
Safari can’t open the page “http://fpdownload.macromedia.com/get/flashplayer/current/installflash_playerosx.dmg” because it can’t find the server “fpdownload.macromedia.com”.
I know it must be my mac as I downloaded both of these at work on another mac and all was fine.
I might be being totally thick, but can anyone suggest anything?
thanks

Hello Iknownowt:
Welcome to Apple discussions.
FWIW that link results in a "not found" message here. I suspect either the link is wrong, or the web site has changed something.
I just drilled down on the web site in question and downloaded the flash player with this URL:
http://www.macromedia.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash&promoid=BIOX
Barry

Aperture hangs on imports and other stability issues

My aperture will hang on imports, does not like me to do anything else at all when importing, lest it hang and if it hangs once and I force quit I have to restart the system to make it work again. I have had 5 crashes today and really PO'd. This is 1.5.6 and I am running 10.5.5.

Have you done anything to the files before importing them? In particular I'm thinking about giving them keywords through Bridge or LightRoom?
I have experienced Aperture hanging until force quit if I had done keywording to the (in my case) DNG's via Bridge / LightRoom prior to importing them into Aperture.
Regards
Paul K

Some podcasts i want to save and others updated, Possible?

Is this possible..... on certain podcasts I want to save every podcast(and delete manually if I don't want it) and on others I want to automatically update with the latest cast and discard the old one. How do I do this?

Hi,
I have similar problem. We are producing a 70 meg browser based game and would like the user to be able to cache the game to avoid reloading the game the next time. Can this be done if the user authorise the save? If, so how? We don't care where the game is cached .
Can we prompt the user to download the file by providing a link from within the SWF application?

Muse [and other] update misinformation?

There is something wrong with this image.
Creative Cloud indicates Muse is 'Up to date' yet, every time I launch Muse I get the dialog to update.
Every day the date changes. [I KNOW] there isn't a daily update.
Note 1
This is not the only mistakes the indicators are making.
Edge Animate IS installed [ it's open and running at this moment ] yet the Creative Cloud update indicates it is not even installed.
Note 2 - This is NOT spicific to this computer. I have the same result(s) on my laptop.

Thanks - BUT the issue is NOT spicific to MUSE.
Additionally - CC indicates that Edge Animate is NOT even installed - but it is,
Ocassionally - when I open Photoshop it wants me to update when none is applicable.
The issue is with the complete Adobe CC update system!

IPhone 4 (and others) update to IOS 6 leads to restore mode stuck on a loop: Solution

Hello everybody .. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price..
Anyways after about 18h of search and stress I came across this link:
http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
Well hope that will work for you like it did for me

Hello jaideniv,
Thank you for using Apple Support Communities!
First I would recommend this article named Can't connect to the iTunes Store found here http://support.apple.com/kb/TS1368. It will get you started with troubleshooting iTunes Store connection issues on the computer and the phone.
If needed there is a more advanced article named iTunes: Advanced iTunes Store troubleshooting found here http://support.apple.com/kb/TS3297 that I would next recommend.
Take care,
Sterling

Why is my Garageband freezing after a few seconds of recording after recent iTunes and other updates?

I use garagband regulalry for voice recording. It now freezes after a few seconds(if that) of recording. I use an Audio Technica usb mic with no problems. I remember this happening with GB afer another OS upgrade in the past.. Is there a problem or should I be looking for something on my setup? I run 14gb of ram, have a timemachine connected and use an apogee duet.

No problem ; if you look at the question you posted initially - your forst post-, it is signed with a profile signature as the last line:
MacPro, Mac OS X (10.6.1)
and that made us think, that you still are using Mac OS Leopard, where the user library in your Home Folder is visible and easily accessible.
You can change your profile from the "your Stuff" drop-down menu in the upper right corner of this webpage:
Regards
Léonie

Free Goods Import Process with Customs, Freight, and Other Taxes.

hi,
I have to import free goods but have to pay for Customs, Freight, and other Taxes.
1. If I tick Free Goods Indicator in PO Line Item, Condition Tab at line item disappears. It will not to calculate other conditions at Header level also. - So I cant execute this option.
2. If i take price of material and insert Condition Type: R001:Discount/Quantity with material price/qty, then it gives Error Message - "Price Must be greater than 0".
So, Is there any way through which I can procure Free Goods and can maintain conditions for Customs, Freight, and other Taxes in Purchase Order.
Please help me in this regard.
- Jignesh

Hi,
1) Create an import PO in ME21N with material price and all custom duty conditions (as you normally create). no need to put free tick indicator.
2) Process MIRO for goods and delivery costs simultaneously.
3) Maintain zero amount for goods item and actual values for the duties (Ensure selection of goods item including delivery cost items)
4) Save the LIV document
5) Check PO item history got updated with IR-L and DCIn. (IR-L will updated with zero amount)
6) Do MIGO w.r.t. IR document number.
7) GR FI document will get updated with the non-set off duty values only.
Regards
Rajesh

Unable to update iPhoto and other iLife products

Hi,
I bought a MacBook Air last year, which came with iLife pre- installed.
The iPhoto version is 9.1.1.
But for some reason I can't get auto update for it. I tried to register it, hoping that this may solve the problem, but it requires a MPN number which I don't have.
I also tried to download the updates from Apple online download, they would not install.
Can anyone help resolving this problem? Any suggestions.
Many thanks.
John

Thanks much.
Indeed after I moved back the apps, they are now updating. I guess that's the trouble for being too anal.
One more thing, after iPhoto is updated, it still gives me a message "A photo has been found in the iPhoto library that was not imported", but if I click "Yes", nothing was imported, and there is a Recovered Photo folder, but it was empty.
Any suggestions on the fix?
Thanks again.
John

Can't open iTunes, Mail, Safari, and others since Security Update download

I see that this subject has come up in other posts - here's my situation -
I have a four year old Powerbook G4, running on 10.4.11. I downloaded (using Firefox as my browser) Java for OS X 10.4 Release 5, iTunes 7.6.2, and Security Update 2008-02 (Power PC). Since that time, I can no longer open iTunes, Mail, Safari, iChat, Yahoo and MSN Messenger. Software update will not open from the Apple menu, but I can open and run it from the System Preferences panel.
I tried to re-download Safari and iTunes, but the installer won't open the files - just says that the installer closed unexpectedly and to send the info to Apple.
I have used Disk Utility to repair permissions on the HD (my HD is not the original HD, but a new one installed two months ago), and the device, without any success.
Any ideas in where to go from here?

Should I try doing that before I try the Archive and Install?
Running DU from the HD will not allow you to repair the HD, but it will allow you to Verify the HD to tell if you need to boot from the Install disk to actually Repair it.
Should you need/want to do it from the Install Disk...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Also, if I try Archive and Install, will it delete all of my personal files, too, or will these be carried over?
If you use A&I and choose the Preserve Users & Settings, it should just replace the OS' files and leave all yours intact. About the only way it could fail is Power Failure during it, (make sure Laptops have AC power during A&I or Repairs, , updates, etc.), Bad Disk/Directory info to start with, or flaky RAM or some such odd thing.

Can't update to Mac OS 10.4.4 and others

what up,
It seem I can't update to Mac OS 10.4.4. Whenever I'm installing 10.4.4 I keep getting the message "There were errors installing the software" and "Please try installing again". I'm not sure what's going on but now I can't update to Quicktime, iTunes, iPod Updater, and others.
Can anyone help with this problem. I would really appreciate it.
PowerBook G4 Mac OS X (10.4.3)

PROCEDURE FOR MAJOR INSTALLS such as 10.4.4 and QT 7.0.4
1. Backup all your important data. This includes a lot of stuff in [your home directory] / Library / Application Support and [your home directory] / Library / Preferences, plus whatever else you can.
2. Repair disk permissions or a lot more with the procedure here:
se the free program YASU to do some internal maintenance tasks.
Download YASU. http://www.macupdate.com/info.php/id/13416
Open and run. Enter your password.
Check to "ON" :
.... daily
.... weekly
... monthly
... repair permissions
.... clear (3-4 kinds of caches)
Run.
Yasu automatically reboots.
Repeat this process twice a month.
3a. Download the COMBO update for 10.4.4 http://www.apple.com/support/downloads/macosxupdate1044combo.html
3b. Download QT 7.04
4. Unplug all printers, iPods, scanners, firewire drives, USB 2.0 drives. Everything except the keyboard and mouse.
5a. Install the combo update and reboot.
5b. Install QT 7.04. and reboot.
6. Repair disk permissions one more time.

I updated imovie, which is now totally different. I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos. Clicking on "close" doesn't work. How do I get out of "import"?

I updated imovie, which is now totally different. I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos. Clicking on "close" doesn't work. How do I get out of "import" and then how do I access iphoto?

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

DSLR import and other updates

Similar Messages

Maybe you are looking for