DSN's Missing in the ODBC drop down list box

Being new to JDeveloper, I have been running through the
tutorials. I have installed Oracle lite on NT4 SP3 and have
tested out the sample data base 'Polite' using the installed
odbc driver through MS query ...all works fine, however in
tutorial 3 while trying to add the Data Form using Oracle Lite
driver, no dsn's appear on the next screen of the wizard when I
click on the 'ODBC drop down list box'. How do I get Jdeveloper
to bring up the DSN's. I have also tried the 'Sun JDBC-ODBC
driver' route, yet still there is not a single DSN in the drop
down list box.
Thanks
null

Mohamed Nosseir (guest) wrote:
: Gavin Higgo (guest) wrote:
: : Mohamed Nosseir (guest) wrote:
: : : Gavin Higgo (guest) wrote:
: : : : Being new to JDeveloper, I have been running through the
: : : : tutorials. I have installed Oracle lite on NT4 SP3 and
have
: : : : tested out the sample data base 'Polite' using the
: installed
: : : : odbc driver through MS query ...all works fine, however
in
: : : : tutorial 3 while trying to add the Data Form using
Oracle
: : Lite
: : : : driver, no dsn's appear on the next screen of the wizard
: : when I
: : : : click on the 'ODBC drop down list box'. How do I get
: : Jdeveloper
: : : : to bring up the DSN's. I have also tried the 'Sun JDBC-
ODBC
: : : : driver' route, yet still there is not a single DSN in
the
: : drop
: : : : down list box.
: : : : Thanks
: : : Would you please give us more information about your
: : : configuration? JDeveloper version, Oracle Lite version,
: : Windows
: : : NT locale setting? Is it US version of Windows NT or local
: : : version?
: : : Thanks.
: : I am using Jdeveloper beta 2 (downloaded from the Oracle web
: : site) against Oracle lite 3.0.6.2.4 on Windows NT 4 sp 3.
: : Is this all the info you require?
: I also want to know if your Windows NT is a US English version
or
: a localized version?
: Thanks,
It is a Windows NT US English version
Thanks
null

Similar Messages

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

How to get the selected value/key of a drop down list box in webdynpro Java

Dear SDN Members,
I have added some static data into a drop down list box by key UI element using the procedure specified in value help tutorial.
Now i want to display the value selected in a dropdown list box on view whenever i select an item in a dropdown list box.
Can any one put here the code part relating to this.
Your help will be awarded.
Thanks in advance,
Regards,
Sireesha.B

Hi Sireesha,
You want to display value based on the key selected in dropdown list. If you want to do like that
1) Create a context attribute for ex: key_value
2)In the properties of the attribute select the calculated as true.
3)It will create getter and setter methods for your attribute.
4)Go to implementation add the following code in getter method of your attribute
String attributeName = IPrivateCreate.IContextElement.KEY;
//KEY is your dropdown key attribute not the value attribute.
IWDAttributeInfo attributeInfo = element.node().getNodeInfo().getAttribute(attributeName);
ISimpleTypeModifiable simpleType = attributeInfo.getModifiableSimpleType();
IModifiableSimpleValueSet valueset = simpleType.getSVServices().getModifiableSimpleValueSet();
Object key = element.getAttributeAsText(attributeName);
return valueset.getText(key);
Regards
Suresh

The portlet name is not displayed in the portlet drop down list ?

Hi,
I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
I am not sure if I successfully deploy the portlet?
pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
The message I got after execute the pdeploy command is =>
Deploys the portlet war file and inserts the provider into display profile..
OPTIONS
--help Help message (false)
-u --runasdn UID Bind DN (none)
-w --password Password (none)
-p --wc_password Password for WebContainer's Admin (none)
-i --instance WebContainer's Instance into which the war file is to be deploye
d (*)
-d --dn LDAP DN of the target node (*)
-g --global Global display profile (false)
-r --rolesfile File containing the DSAME and portlet role mapping (*)
-f --userinfofile File containing the user info mapping (*)
-v --verbose Generate debug messages (false)
-V --version Generate version information (false)
-l --locale Locale information (en_US)
OPERAND
Specifies a path to the war location.
Deploying to IWS
Is this mean that successfully deploy the portlet ?
After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
the portlet name is not displayed in the portlet list.
How can I make the portlet name displayed in the portlet drop down list ?
Can someone help me ?
Thanks!

Hi
According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, there is detail about listbox control in asp.net. You can review the following links:
How to Bind/Load/Fill ListBox with Sql Server Database in asp.net：http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
How to get multiple selected value in ListBox control - ASP.NET using C#:
http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
Thanks
Lydia Zhang

How to increase the width of the drop down list box in SSRS multi value parameter

Hi,
I am using SSRS 2012. I have a parameter, which accepts multi value.
The width of the drop down list box is very small, and the user need to scroll to the right to view the complete view of the content in the list box. But, if I don't use multi value then the length is good. Kindly suggest how to I increase the width
of the list box when it set to multi value parameter.
Thanks in advance,
Mahalengam Arumugam

Hi Mahalengam,
After testing the issue in my local environment, I can reproduce it. When the values for a single parameter are too long, the drop-down list of the parameter will automatically enlarge to an appropriate size. While the values for a multiple parameter are
too long, we need to scroll to the right to view the complete view of the content in the list box in SSRS 2008. But in SSRS 2008R2 and SSRS 2012, we can directly drag the black control at the bottom of the list box to control the size.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Hi Katherine,
Thanks for your reply. I understood we need to drag the list box to a maximum size to view the contents.
But, this seems an additional task, i know this is a limitation in the current version of SSRS and hope it will be resolved in the next versions.
Thanks for your efforts,
Mahalengam Arumugam

[Forum FAQ] The Value drop down list is grayed out when you perform search for Group Policy Objects in GPMC

Symptom
On Windows Server 2012 or Windows Server 2012 R2, when you use the Search for Group Policy Objects feature in GPMC, the “Value” field is not populated when you choose “User Configuration” as the Search Item. (See Figure 1.)
<Figure 1>
Cause
The happens because the Data of the (Default) value of the following Registry Key is not correct.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{4D2F9B6F-1E52-4711-A382-6A8B1A003DE6}]
By default the Data is (value not set). (see Figure 2)
<Figure 2>
Resolution
The registry keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions] are the Group Policy Preference Client Side Extensions. The CSE name of the GUID {4D2F9B6F-1E52-4711-A382-6A8B1A003DE6} is
RemoteApp and Desktop Connections. Please follow the steps below to resolve the issue.
1. Locate the registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{4D2F9B6F-1E52-4711-A382-6A8B1A003DE6}]
2. Take the ownership of this key: Right click on the registry key and choose Permissions option and click the Advanced button on the dialogue window. Then on the Advanced Security Settings dialogue window, click Change button to take the ownership
of the key for the current logon account and make the current logon account Full Control permission with the registry key. (See Figure 3.)
<Figure 3>
3. Change the data of (Default) value from "(value not set)" to
"RemoteApp and Desktop Connection Component". (See Figure 4)
<Figure 4>
4. Once the steps above are completed, the Value drop down list will be populated again when you perform Search in GPMC. (See Figure 5)
<figure 5>
This article has been created as a TechNet Wiki
here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

thanks for the tip - but you should create this as a wiki article as it will be easier to reference in the future
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Exactly what does the Data Drop-down List do?

What does the Data Drop-down List do? Is it used to make a drop-down list from certain records in a column in a table of a data base?

Yes, this is exactly what it does. However, it's a custom control, not a built-in control. JavaScript is used to set it up. In order to use it you have to have a data connection in the document and modify the "Initialize" script, which is were the list is populated from the DB. The "Initialize" code is a good example of how to use XFA JavaScript to access a DB. However, the code is also written in a very general manor and takes the long way around to hooking up to the DB. Much shorter code can be written for a specific DB.
Thom Parker
WindJack Solutions
www.windjack.com

Suppress entries in the drop down list box for fields Priority and Category

Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM

Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM

Reg: Drop-Down list Box not displaying values

Hi Experts,
i am publishing a module pool program in the internet using SICF Transaction . In the internet my drop down list box is not displaying the default value but in my sap it works fine .
What may be the problem?
Regards,
Vikram

Hello Thorsten Domsalla ,
My Problem is in my sap module pool program there is a drop down list box which disaplays default values its working fine in sap gui but when i access through internet (SICF) Transaction the Drop down list box not listing out default values .
i am using Integrated ITS Version 7.0 and Support package 08.
Regards,
Vikram

Drop-Down List Box on Form Is Cleared at Each Step in a Workflow Process

Hello users,
I am posting this in the Workflow Designer, Workflow Server and Form Designer forums so that it gets a little more exposure, so I apologize if you receive this more than once.
I have a Form Designer 5.0 form attached to a Workflow Server 6.1 process. On the form, I have a drop-down list box being populated from a text box by the OnDataLoad event on the form ONLY when the process is first initiated. The text box is populated by the OnAssign event of the first step in the process map. When the task initiator submits the form to the second step in the process and the user opens the form, the drop-down list box is no longer populated - it has been cleared. There is no code anywhere in either the form or in the process map that clears this field.
Can anyone tell me why this is happening? Is it a bug?
Thanks.

Unless you hard coded the list box on design time, it will lose all data when the form is routed.
Only solution to this is:
create a text box and store your list box choice list to the text box before submitting your form and import the list box choice list back from the text box on form ready.
Hope this helps.

Is it possible to allow use to type entry into a drop down list box ?

Hi ,
Is it possible to provide type in the value option ( provide option to user like he can select a value from the extracted data in a drop down list object and also he can enter a value manually ) to a drop down list box on an interactive form ?
Nanda

Hello Nanda,
In the Adobe LiveCycle Designer you can specify several list items for objects of type 'Drop-down List' and it is also possible to allow custom entries (checkbox: "Allow Custom Text Entry").
Regards,
Philipp

How to use value in a drop-down list box as "With these Values" parameter?

Hello, new user.
I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
P6_STUDY_NBR
My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
&P1_STUDY_NBR
and that does not work. If I put in one of the study numbers, like 336-00, then it does work, but I want it to pass the study number the user chooses in the list box. How do I refer to the contents of P1_STUDY_NBR?
-Mary

Yes, that does work, thanks. I'm now getting the default value I was putting in yesterday rather than an error message, so there must be something loading it, but I'll hunt around for what process might be doing that, or try re-creating the master-detail form again.

Drop Down List Box from an Array?

I have an array - a lovely little 1-dimensional array of customer last names - that I want to display in a drop down list box so my user can begin to type a value in that list box and CF will bring up the matching entry.
I have tried cfloop and cfselect, but haven't had any success. Once the user clicks on a name, I want to be able to take that value and do some other processing.
Any suggestions?

No Ajax - CF is a ***** enough as it is.
OK - I see where you started to go with your link, but lost you somewhere in Step 2.
I like the idea of a master query with sub queries off of it (Queries of Queries). Here's what I got so far:
<cfquery
name = "MasterMemberQuery" datasource = "cfissues">
        SELECT * FROM Members
        ORDER BY LastName</cfquery>
  <cfquery name = "LastNameQry" dbtype = "query">
     SELECT MemberID, LastName
     FROM MasterMemberQuery
    ORDER BY LastName</cfquery>
This worked perfectly - nice cfselect to display the last names - just like before. However, I still cannot capture the user's choice from the cfselect statement:
<cfform>
      <cfselect name = "ChosenLastName"
                    query = "LastNameQry"
                    value = "MemberID"
                    display = "LastName"
                    size = "1">
     </cfselect>
     <cfoutput>
               The chosen MemberID = '#LastNameQry.MemberID#'
     </cfoutput>
</cfform>
The name "ChosenLastName" is always labelled as invalid, and the cfoutput always gives the MemberID of the first entry in the LastNameQry, never the user's choice.
I need to take the user's choice of last name, capturing the MemberID (the value attribue of the cfselect) and read the MasterMemberQuery to get just the single member's data.
And is it me or does this forum's site run at about 300 baud?????

ABAP WebDynPro tutorials for Roadmaps and drop-down list box

Hi Experts,
I need some tutorials on Roadmaps and drop-down list box in ABAP WebDynPro which will show me step by step process how to create application using this. 'help.sdn' pages do show the procedures for implementing those ui elements.
And also the previous threads refer to some expired documents.
Thanks in advance.....
Plz help....
Edited by: Akashdeep Basu on Aug 9, 2008 9:30 AM

Hi
[SAP BLOG on ABAP-WEBDYNPRO|https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9]
[Step-By-Step Approach|http://help.sap.com/saphelp_nw04s/helpdata/en/79/002c2a0d43e645a39a89dd662b5f68/content.htm]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
Regards
Pavan

Drop-down list box and Mouse wheel.

When a xft form doesn't fit in the web browser (using webaccess) because it's bigger, the drop-down list box control has a distinct behavior than other controls like select control in html or listbox in VB.
When I click in the field to drop the list and scroll down the mouse wheel, the position of the control remains static while the form in the background scrolls down, so the drop-down list box is at the top of the other controls of the form. In most of the forms I've used, the "normal" behavior, if I can say it this way, is to scroll down the list. It doesn't disturb me at all, but some users have complained this behavior. Is there a patch for this control?
I've using form designer 5.0 with AWS version 6.2.121.0
Any help is appreciated,

No patch that I am aware of. It could be related to a memory issue within the browser container. I have seen this behavour many times over when dealing with larger forms.

DSN's Missing in the ODBC drop down list box

Similar Messages

Maybe you are looking for