Dso data activation error
Hi experts,
During the activation of data in DSO I got an error, there is an invalid entry. There are almost 15 million records in this DSO I dont want to reload and activate them again because I am on quality server. I just want to keep these records as much as are active and want to report on them. I cannot change the request status to green as we do it in Cube. How can it be done.
regards,
ray
Check the quality status of the request. and also verify the number of records added to Active table as this for UAT or testing purpose.
Other wise just delete the data from DSO and filter out the invalid entries and then reload the data. or Load a selected data for one or two years for the testing purpose.
Hope this helps.
Regards,
Reddy
Similar Messages
-
DSO data Activation Time out-DATABASE ERROR-440
Hello all,
We are getting error in one of our standard DSO during activation -Error-Process 000001 did not confirm within the permitted time period,we repeated process chain ,we got the same error,we activated manually -we got the same error, I need to mention that we only have 3278 records which should not take more than few seconds-minutes to activate. we reset RSODSO_SETTINGS wait time by increasing still did do it , we changed data package 10,000 ,50,000 but it didn't correct the error, we even change DSO SID generation setting during activation to never create SID ,it didn't correct the error, we reactivated DSO,we indexed the table both new and active table but we are getting the same error, in a SM21 we are getting error DATABASE ERROR -440 [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAMED > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND... DBA reorg and did some other things but we are still getting the same error and the are not sure what the procedure DSO_VERSION is ,Any body have any idea what that procedure is and why we are getting that in sm21 during one DSO data activation? Has anybody had this kind of experience before? by the way we have researched on google SCN and nothing close to our scenario. By the way we ran the activation with the different settings both in dialog and background.We also got error Background process BCTL_4Z81MSY8311QNTKRYGRDYVFXY terminated due to missing confirmation ...Any suggestions will be of great help and points will be awarded....
Thank you.Error in Sm21-
04:57:20 BTC 036 810 PRGRAU0 BY 2 Database error -440 at EXE
04:57:20 BTC 036 810 PRGRAU0 BY 0 > [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAME
04:57:20 BTC 036 810 PRGRAU0 BY 0 > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND
04:57:20 BTC 036 810 PRGRAU0 BY 1 Database error -440
Background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA terminated due to missing
confirmation
Message no. RSODSO_PROCESSING041
Diagnosis
The confirmation from the background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
did not occur within the set time. It was thus ended by the system.
System Response
Background process: BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
Number: 1
Procedure
Check the package size for the application to be processed or change the
package size. -
ODS data activation error system SAP BI 7.0
Hi Gurus,
I am carrying out full load in a standard ODS.
When I try activating the request,system is giving me the error message as given below.
No SID found for value '%' of characteristic 0COND_CURR.
I have also tried the option of transfer global settings in RSA1->source systems.
Please help in this regard.Hello Gurus,
Issue resolved
For my requirement i changed info object 0currency -> General Tab page -> Transfer routine -> Created and written a code as follows
If result = '%' .
result = 'USD'.
endif.
This resolved my ODS data activation issue.
Thanks a lot for all your help. -
SAP BW - Data activation error
Hi,
I have loaded arround 3 million records into 0FI_GL_4 datasource and everything is ok in PSA but when I am activating the loaded data into DSO I am getting an strange error on some characters in a Text field . Unfortunately I can't realize in which packet(s) in PSA error is and it's not in the packet I see in the error log.
I am not sure if it's a good idea to extend the valid characters list or not and how can I do this. By the way, loading this size of data and activating it taks me 1.5 hourse. Is there any way to load just a part of data to check which part of data cause the error?
<<Text removed by moderator>>Hi,
Please check why you are getting this error.
There can be number of possibility.
1.Special character are coming
Please in RSKC put Capital_all.
2.If small letter are coming then either allow the small
character or write a routine to convert it into upper case.
Otherwise delete the request from data target and correct it in psa and laod it.
If you want to break the load in seperate part then please Run the DTP with filter and
Give different condition ie some date ranges.
Thanks,
saveen kumar
Edited by: saveen kumar on Nov 11, 2010 10:34 AM -
Master Data activation error after transport
Hi,
we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Any suggestion?
Thanks
Albertowe have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
I tryed to re-transport but i have always the same error.
I already gave you option-1 above. Here is my thinking.
Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
ext, run the RSRV test on the InfoObject in DEV.
After you do this, collect this InfoObject in a new transport and move it to Test.
I am not sure it wil solve the problem, but its worth a try.
But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
Uday-Ram Chamarthy -
Urgent| Master data activation error
Hi All,
I am getting error in activating the master data. The error is in filling the SID tables.
Actually I have added a new attribute in Master Data, now i want to make it as navigational attribute. But when i try to activate my master data it gives an error.
But if we try to activate master data without making it was navigational (i.e. keeping as only display) the master data gets activated.
Please help me in this as it is very urgent.
Regards,
KshitijHi,
If your attribute characteristic you want to make NAV is brand new, first try to maintain its master manually with a value; activate the master data.
then try to reactivate your NAV in the other characteristic.
If this still doesn't work try the following
1. keep the attr as display for the moment
2. via menu Extra / DB Tables in RSD1, Fill attr SID table
3. reactivate the IOBj
hope this helps...
let us know...
Olivier. -
Hello
after i have gone thru t-code LBWE.. i clicked on maintaince tab.. then update overview is done.. after that i clicked on bw delta maintance queue.. there i didnt find any data sources over there..hi,
it's likely that there aren't any entries there yet because you haven't initialized extraction of any deltas from BW. you must first extract a datasource in BW with the option 'Initialize Delta' in the infopackage.
ryan. -
Activation error in ODS 0FIGL_O02
Hi,
I am facing one problem in my BIW that daily the activation of the ODS 0FIGL_O02 is failing. Daily I am activating the data using the program RSODSACT1.
It is included in the process chain.
Please help me to remove my manual work for activation tha data of the ODS.
Thanks,
Nitesh.Hi,
You can give this a try:
uncheck the "Activate ODS object data automatically" setting in DSO, and include the DSO data activation step in the process chain. this will the serailize the process and hope fully solve your issue.
Hope this helps...
Regards,
Umesh -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Error while activating data from new table of DSO to active table
HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHYHi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM -
DBIF_DSQL2_DEFAULT_CR_ERROR while activating DSO data
Hello Friends,
While activating DSO data i am getting 'DBIF_DSQL2_DEFAULT_CR_ERROR' . please suggest me a solution .
Regards
NileshHi Nilesh,
Try to check the following link:
/message/5657425#5657425 [original link is broken]
And moreover this error occurs during COMMIT or ROLLBACK to "DEFAULT" database connection.
Regards,
Srinivas. -
DSO Activation Error - While Installing BI Content
HI Friend,
First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found 80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
Flat File Active Sync - Notify admin incase of data processing errors
Dear Friends,
We have couple of Requirements to use OOTB flat file active sync adapter
1. To read data from a flat file and update the records in Sun Identity Manager system
2. Notify admin if there are any data processing errors while reading data from a flat file. The data processing errors can occur if there is an invalid data. for example, lets say the input flat file has 3 columns defined, but the file conatins records which has four values.
firstname,lastname,email
testfirst,testlast,[email protected],12345
Req#1 is working fine. There are no issues with that.
Req#2: if the file contains invalid data, i noticed that the active sync adapter throws an Array Index out of bound exception. so, we need to send an email notification to the admin whenever data processing errors occurs.
I noticed that whenever the data processing exception occurs, the active sync adapter stops processing records and the active sync input form was not triggered. Unless active sync form was triggered, it's very difficult to determine whether the data was read successfully or not.
Please let me know if there are any configurations/customizations to me made on OOTB flat file active sync adapter to handle data processing errors and send email notifications to administrators.
Appreciate your help
Thanks
VijayHi,
We have same requirement that
"Notify admin if there are any data processing errors from a flat file.
The data processing errors can occur if there is an invalid data or account is locked etc..."
In short notify admin if any error logged in Active sync Log file while active sync runs.
Yes,I noticed same that whenever the data processing exception occurs, the active sync adapter stops processing records and the active sync input form was not triggered. Unless active sync form was triggered, it's very difficult to go ahead to meet the requirement.
Please let me know if there are any configurations/customizations to me made on flat file active sync adapter to send email notifications to administrators.
Thanks,
Sudheer -
Improve the performance of the data activation on DSO.
Hi,
I would like to improve the performance of the data activation on DSO. 1000 records should be uploaded by 10 minutes.
Now it takes 10 minutes to activate data in DSO. And it is strange that it takes long time ( about 9 minutes) before starting activation.
ex :
in the request task log of the activation:
data activation 15:10:00
main process 15:10:01
technical status 15:10:21
But activation is started at 15:01:00 here. (this is started via process chain).
I have no idea why it takes so long time and how I can improve.
Kind regards,
MasaakiHi,
Try this also.
1. Remove Bex Reporting check box in ODS if not required.
2. Goto manage ODS -> activate -> activate in parallel -> increase the number of processes from there.For direct access try TCode RSODSO_SETTINGS. Not sure this is possible in your case.
thanks,
JituK
Maybe you are looking for
-
Guy's pls let me know ,how we can delete files which we have in ALL11 tcode. thanks sanju
-
Dear friends, My question is about PO approval strategy. I add a new field to CEKKO (ERNAM - name of person who created the object) and create a characteristic (Z_ERNAM) that referrers to CEKKO-ERNAM. Then assign this characteristic to PO release cla
-
My Library has ten more songs than my iPod. How can I find out which songs are not syncing? I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard driv
-
please help... i recently bought an iphone 5 which a friend offered me when she was in korea..when i got the phone i noticed the back panel of my phone says: kcc-cmm-apa-a1429..should i worry? is my iphone 5 legit? it works on itunes etc and i was ab
-
I'd just like to check something. When I was trying out a bit of as3, I tried having as3 objects, but as2 code on the timeline, so I'm guessing that you can't nest or load as3 objects inside as2 movieclips because it probably treats everything like i