DSO in Query designer

Hi everybody,
I created DSO and now I would like to build query on it. The problem is I can not see this DSO in the query designer. What should I do to make it visible?
Regards
Erwin

Hi
Reactivate the ODS and see once again. or else come out and reloging for BEx,
if notting is working then , download the lastest patches and apply
http://help.sap.com/saphelp_nw70/helpdata/en/64/34d13fa69a4921e10000000a1550b0/frameset.htm
santosh

Similar Messages

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Combine two reports in query designer

Hi experts,
i want to ombine two reports which are using key figure with sap exit in query designer
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi,
Have you tried APD?
You can combine them using workbook or from a multiprovider query. APD is another option. Have a look at these APD docs:
In APD, you can take input from two queries, then combine them and load to another object (DSO).
[Analysis Process Designer |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/413ba6c1-0d01-0010-1980-ec450e30f23c]
[AGSAP NetWeaver 7.0 Application Process Designer|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f]
Let me know where you r stuck...
Regards,
Ashish

Unable to find my InfoArea in Query Designer

Hi all,
Iu2019ve created an InfoObjectCatalog, InfoArea, DSO and an InfoCube. The data source, transformation,DTPs are all active and the flat file is loaded into the cube. I've the data also in the cube. I want to create a query out this cube that I created. But when I open query designer and look for my info area, I donu2019t find it. I searched for Info Area in Find but it says u2018No objects foundu2019. I can't find any of the objects i.e. either the cube or the Info Area.
My question is why canu2019t find any of the objects that I created inspite of all the objects being active? How do I locate my objects in Query Designer that I created in BI backend?
Please advise.
Thank you.
TR.

Hi,
You need to create the Query first to Find the Info Area (relevant to that Query)
You can search the Info Area Manually (if you dont have Query also) provided You need to say New at Query designer Standard Menu.
Hope it helps

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

Quantity is Showing Blank : Bex Analyzer, Source - Bex Query Designer

Hello Expert SAP BI,
I Extracting Data from Flat File,
Till then Cube My Transaction data Loaded Perfectly ,
i want to create Report in Bex Analyzer, fetching fields from Bex Query Designer.
Characteristics are showing in Rows , that showing in Report , but in Columns added Key Figure , its not showing in Report .
Can any one Suggest , what will be issue and how i have resolve it.
- Thank you.

Datasource -> Transformation -> InfoSource
Infosource -> Transformation -> DSO
DSO -> Transformation -> Cube

InfoObject missing in Query Designer

Hi Expert,
          I created one DSO which contain contian InfoObject InfoA, InfoB and other fields . and i also create a query against this DSO. But in Query Designer, there is no InfoObject InfoA and InfoB. all other fields can be find in Query Designer! i feel confuse about this ?
         Anybody can give some advise about this?
   Thanks in advance.

Hi Dragon
1. Close query designer.
2. Activate the DSO once again
3. Re-open query designer
Sometimes I also faced refresh issue. but the above steps resolved my problem
Regards
Anindya

Constant selection in query designer

hi guys
please explain abut
constant selection in query designer 7.o

Hi,
For ex if you had designed a MP using the IC's and DSO's in which if all the fields are not in common with both the info provides used in the MP you will get the results in 2 rows and the values for the ones which are not in common will be displayed as # in the results.
This can be the case in Infosets as well.
to over come this we use "constant selection"
Check the below link which explain the constant selection with an example.
http://sapbi101.blogspot.com/2010/05/constant-selection-in-query-apples-and.html

Query Designer - Dimension texts in German instead of English

Hi,
I have an Infoset based on two DSOs and two Master Data info Objects.
When this Infoset is opened in Query Designer to create a new query, it is been observed that Dimension text from the DSOs is displayed in German while the texts from Master Data Info Objects is in English.
We do not have problem with any other infosets.
What could be the problem? What settings are required here for the text to be displayed in English.
Profiles are set to English Language.
Thanks in advance
Regards

Just a correction to the observation made: All the infosets have similar problem.

Navigational Attributes Not Available in Query Designer

I don't see navigational attributes under Dimensions/DimensionA in Query Designer. Is there a switch to enable/disable nav attr. in BW?

Hi,
Yes you need to switch on Navigational charateristics at DSO/CUBE and then add them to MultiProvider Dimension and assign then assign the fields.
Thanks,
Nagarjuna

Sap bi authorizations issue with query designer..

i am using bw 3.x and bi 7 query designer with different kind of probs?...
i am able to see the info provider in query desinger 3.x. but i can see only cubes .i am not able to find dso or infosets or multiprovider.. can anyone suggest is there any authorizations issues..please suggest.
and with BI 7 query designer i am not able to see info providers in info areas folder to design a query..
please suggest if any authorizations should be added or not

hi suman chakravar,
thanks for replying,
can u be little bit clear about the steps.
i went to tcode su01 and entered profile 0bi_all..it doesnt work.
and executed tcode su56.there i can find list of BI related authorization profiles
i added s_rs_all profile to my user. even then i face the same problem.
i can see only queries in query designer of bi 7 format and i can not view info providers.
i can view only cube and infosets and i can not view dso and multiproviders in bw 3.x type query designer
Edited by: satishchow on Dec 14, 2011 3:23 PM

Calculated quantity evolution in Query Designer

Hello,
I have a few short questions regarding ways of calculating a quantity evolution key figure in Query Designer:
I have a sales figure, let's say an order quantity. I'd like to have it's evolution calculated and displayed (based on another variable with a time period selection) next to it.
- Is there any other way of entering the following formula for the calculation then: (figure A - figure A(N-1)) / figure A (N-1) * 100 ?
- I would like to have a positive sign when this calculated evolution is positive as well as the percentage symbol next to it (eg: +15%). Is there a way to do this?
- Is there a way to automatically fill the time period selection for the variable (using for example a current week - 1)?
Thanks for your proposals.
Best regards,
Olivier

Hi there:
I think i understand what you are asking for. I just did a similar calculation myself after lot of research. Hope i can save you that trouble.
We calculated Change from prior week key figure this way.
In our Open Sales Order Position Report we have Open Order as of a particular day. But users want to know how their open order position changed from last week as of sunday of last week.
We came up with a solution to create an open order position snapshot InfoCube and store the Open Order value in that cube as of every sunday. The data will be delieted every sunday and reloaded via APD from the current open order position InfoCube.
We run a query on the open order InfoCube to get the total open order position based on different characteristics of interest.
Then load it to a DSO with direct update using APD.
Then we load it from this DSO into the prior week infocube.
Then we have a MultiProvider which puts the current open order InfoCube and the Prior Week Open Order InfoCube.
We created a query on this MultiProvider which gives both the current open order position and last week's open order position and we make a cacluation to subtract the two to give us the change from prior week.
If we need a percentage we can calculate from this difference using percentage function.
When we load to prior week open order InfoCube, we use System Date function available in the transformation by formula to calculate the 0CALWEEK to store the week of the prior week data.
In the query i have a key figure for current open position and another key figure for prior week open position each restricted by InfoProvider.
If you are not deleting the prior week data every week, you can add a restriction in the prior week open position as (0CALWEEK -1) so it will always get only last weeks data.
Hope this makes sense.
Good Luck.
MP.

Some question about the query designer

hello, dear all,
I am a new comer of here, and I am intersting in BI, but I have no basic knowledge about it.
so I just want someone could give me some advice about it.
our boss need I do the developer about the query designer, I just have searched in this forum. but nothing founded for I am a new comer here,
I heard there are some training document of the query designer, could someone give me the URL, thanks.

Hi,
Query desinger is used to develop a Query, Query can be created on following data targets
-Info Cube
-DSO
Virtual data target
-MultiCube
-Infoset
-Multiprovider
We have 5 section in query designer
- Infoprovider : where we select the data target , on which report to be created
-Filter : to restrict value at infoprovider level ( if you want data for year 2008, for example)
-Free Characterstic : this allow you to drill down
-Columns : char/keyfigs to be display in columns can be added here
Row: key/char to be display in Rows can be added here
gv me ur mailid i will let u have Bex manual,
I would suggest , if you have any IDES ( training ) system , where you can log in and then go to RRMX,
and try to create new query and add any data target ( which is already created ) and then drag and drop the char/key fig to the required section ,
save it and execute it .....
if you play arround and see the output , that would help u to understand how to work with query designer.
Hope this helps
Sukhi
Edited by: Sukhvidner Singh on Nov 4, 2009 5:36 PM

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

DSO in Query designer

Similar Messages

Maybe you are looking for