Dso is not activated

hi guys,
iam new to BI7 i try to creat a new dso but it is giving message that not activated
the message is
Message no. R7I028
can u give what it is?
no need to say that good ans get good pts also
thanks
ravi

I have received this error when trying to activate a DSO or InfoCube, when that InfoProvider includes a navigational attribute that has been removed from its parent InfoObject. I'm trying to figure out ways to correct the error, but so far the only way I can find is to add the attribute back into the parent InfoObject, then remove the attribute from the InfoProvider and activate the InfoProvider. You can then remove the attribute from the parent InfoObject again if desired.

Similar Messages

DSO request not activating

Hi Experts
I have one request in DSO in my Development system whose request is not activating, not even giving any message. I tried with delete and reload but not working. please suggest some ideas.

Hi,
Please check out the below links.
DataStore built incorrectly; cannot update request REQU_*
"DataStore XXXX built incorrectly; cannot update the request" After changi
Try to diagnose more on same.
Hope it helps.
Regards,
AL

DSO Will Not Activate after Transport with rc=8

Hello,
I had a requirement to make two Purchasing DSOs (2LIS_02_ITM & 2LIS_02_SCL based) write-optimized. I made my changes in the development environment and transported them to QA. The transport went in with rc=8. All of my changes propogated; the DSOs are now write-optimized; however they are not active, nor are the corresponding transformations and DTPs.
I tried activating directly in QA and it would not work. I also tried re-importing my transport, as well as creating a new activation transport and sending it to QA. Nothing worked.
Can anyone help or give me some ideas as to how I can get this activated? Thank you!!!
Here is some of my error text from the transport log:
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s)
The creation of the export DataSource failed
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
Error/warning in dict. activator, detailed log > Detail
Index /BIC/AZ_02_ITM00-RDR (field REQUEST is not in the table)
Index /BIC/AZ_02_ITM00-RDR (field DATAPAKID is not in the table)
Index /BIC/AZ_02_ITM00-RDR (field RECORD is not in the table)
Index /BIC/AZ_02_SCL00-RDR (field REQUEST is not in the table)
Index /BIC/AZ_02_SCL00-RDR (field DATAPAKID is not in the table)
Index /BIC/AZ_02_SCL00-RDR (field RECORD is not in the table)
Table /BIC/AZ_02_ITM00 could not be activated
Table /BIC/AZ_02_SCL00 could not be activated
Return code..............: 8
DDIC Object TABL /BIC/ has not been activated
Error when resetting DataStore Object Z_02_ITM to the active version
DDIC Object TABL /BIC/ has not been activated

Well...after reading your post it seems that only Basis team can help you.
You need to restore connection from RSA1. ( context menu of source system) ..But to restore connection you will be needing Destination's IP Address or hostname, backtround user id /password. More over your system needs to be open ( SCC4) and modifiable ( SE06). All this access normally remains with Basis team.
You can also go to SM59 -
> ABAP connection--->Pick up your source system connection--.Check the RFC.
I think your RFC connection is still pointing to the system where you did copy from. But that may not be the only problem. Even password may be wrong that you will know only after successful check of Destination test.
So, in a nutshell , constact Basis team,
Regards
Anindya

Request Status not Activating

Dear All,
I have created Datasource and DSO and flat file and also created DTP. If i request perticular request id , its not activating. request status not activating.
With Regards,
Baskaran.

Hi Baskaran,
Follow these steps.
Do the loading process as you are doing i.e. using Info package load to PSA, then using DTP to DSO.
Then after loading data, you go to manage. Then Select your green request and then click activate.
A new window will open. There your request will be green. Again select it and click on start (do not click on stop).
Then you will find refresh button there. Click on it. Your green request will turn yellow. Now go on clicking refresh until your request disappears from there. After that close the window.
Then again click on manage. Click on refresh. Now select active data. Your data will be displayed.
Hope this helps.
thanks,
rahul

Error "Personalization not activated." when trying to set personal

Hi Everyone,
Was wondering if anyone has encountered this situation.
I have a crystal report reporting off of sap bw using bw mdx driver which I view through an iview in SAP portal. When I select the parameter values for a parameter using the picklist, I try to personalize it and I get "Personalization not activated."
I find that some parameters I am able to personalize, but when I try to view the report again the settings are not kept.
Is there something I'm doing wrong?
Thanks,
Daniel

Hi Ingo,
Thanks for the hint, We enabled personalization, but we encountered another issue. It seems that the value that gets stored is invalid.
i.e.
I select the value for cost centre.
The value of the cost centre is [0COSTCENTER].[BTT10000011003] - Accounting
The value that gets stored for personalization is 0BTT1/11003. I confirmed in the DSO as well that this was the value stored. When I try to run the report using the personalized values I get an database connector error.
Running the query in rsrt we get the following error Value "0BTT1/11003" for variable "Cost Centre" is invalid.
Any ideas?

DSO cannot be activated when process chain is launched from BPC

Hello,
we are facing the following issue in our project: we have created a process chain that loads transactional data into a DSO and then a BW cube. From there we will be launching the data into BPC.
The process chain that we have built is working and loading OK when this chain is launched from the RSPC trx. However, when launched via the datapakage "Execute Process Chain in BW" data are loading OK from the source system up to the DSO, but the activation does not take place.
The error that we are getting on the BPC data package is:"An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occurred, but was neither handled locally, nor declared in a RAISING clause
Call of the method IF_RSPC_GET_PARALLELIZATION is SINCHRONOUS of the class CL_RSPC_CHAIN failed; the obligatory parameter I_VARIANT has not been filled."
Has anyone faced this issue before? could you please help on this topic? I have tried several options and all of them are pointing to the parameter I_VARIANT.
Thanks in advance.
Kind regards,
Begonia

Hi Reddy,
I've deleted deltas load from DOS, then I launched and activated a repair full load from ECC, it worked well.
After that I went for delta load so the load was OK but the activation failed.
The message 'Type of data update' was: Repeat of the last delta and the Nº of Transferred and Added was zero.
¿Do you think I could solve the problem if I do a repair full load from ECC then I delete the Delta init and create a new Delta init?
Any another idea?
In conclusion I'm not yet solved the problem so advices are welcome.
Regards,
Jorge

Delta extraction for dunning history is not active

Hi all,
I am loading data to the FI Cube (Financial A/c -> Contract a/c receivables ) Dunning header .
This is a Standard infocube. This cube contains two DSOu2019S 0FC_DS08 , 0FC_DS11. When I starting the data loading from the DSO ( 0FC_DS08 ), I create the INIT package . When creating itself it throwing the error u201C Delta extraction for dunning history is not active u201D
When I check on SDN SAP , ( Use Tcode sbiw. Select 'Settings for apllication-specific datasources (PI) ->Contract Aacounts Receivable -> Make Central Settings'. Then tick 'Delta Extraction for Dunning Items Active'.) I got this link. But I could not proceed this link. Can you explain detailed step by step how to proceed to solve this issue.
Regards,
Baskaran.

Hello Baskaran,
Did you ever solve this issue?
We do not have the link in SBIW (ERP 6.0 EHP6).
Thanks,
Andreas

Impact if FIGL10 DSO is not staged b4 FIGL10 Cube

Heallo SDNer's,
How wud it impact if I dont stage 0FIGL_O10 - DSO between 0FIGL_C10 ?
Structures wud be similar - no additional fields in Cube.
Even SAP defined DSO n Cube have similar fields.
Datasource is delta capable - 0FI_GL_10.
Some background - > After having enhanced FIGL10 DSO with some fields which do exist in the datasource I have to have 19Keys to determine the unique records or to pull all records from PSA w/o any records being overwritten.
However, datasource relevant OSS note sugggested to take d help of artificial keys ( for the same DSO...here 1 artificial key will concatinate 4 keys ) .
Data volumes will be less - 200thousands a month.
Wud SAP suggested method ( artificial keys ) be a better bet ?
Please share your thoughts.....any inputs wud really help

Jr Roberto,
You can do this. In BW system.
1. Go to table RSOLTPSOURCE.
2. Enter 0FI_GL_10 as datasource.
3. Check the field delta process value, refer that value to table RODELTAM.
That will tell you what kind of data is coming from that extractor. Based on the delta data (After image, before image and after image, etc), you can decide whether you need DSO or not.
-Saket

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran RS_TRANSTRU_ACTIVATE_ALL program but still in the job log finding some problems like 0BP_RELTYPES_TEXT is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Material ledger is not active in valuation area C002

Dear All,
I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
regds,
Kallu

Hi
For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
Why we need Material Ledger?
A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
valuations.
Material inventory values are normally carried by the SAP system in one currency. The material
ledger component enables the R/3 System to carry inventory values in two additional
currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
historical exchange rates directly at the time of posting. Businesses such as those in highinflation
countries can therefore carry their inventories in a more stable currency (such as US
dollars). This reveals inflationary effects on inventory values.
If you use transfer prices to represent value flows in your company in different
valuation views, you must use the material ledger. This allows you to carry your
inventories in three different valuations (legal valuation, valuation for reporting
purposes, and profit center valuation).
Before activating the material ledger, make sure you know which currencies and valuations
you want to use, because you cannot go back and change the setting.
Activating the material ledger is a prerequisite for using multiple valuations.
Thanks
Raman

Material ledger is not active in valuation area S001

Dear All,
I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
regds,
CB

Hi,
Please check your Material Ledger Activation setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked. After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation. If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box. I hope this step will resolve your issue.
Regards
appalas

Dso is not activated

Similar Messages

Maybe you are looking for