DSP resources? - How to for dummies please.

Can you help me undestanting how to uses the calculator?
The first issue I found is how to make it work with PVDM3 or VWIC3, then what do I need to write in each part.
Finally how to interpret the output.
I want to know if whit the below information I can support two E1 (32 channels each)
R1#show inventory
NAME: "CISCO2921/K9", DESCR: "CISCO2921/K9 chassis, Hw Serial#: XXXXXXXXXXX, Hw Revision: 1.0"
PID: CISCO2921/K9      , VID: V08 , SN: XXXXXXXXXXX
NAME: "VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC3-2MFT-T1/E1 , VID: V01 , SN: FOC17045FDX
NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 32 Channels"
PID: PVDM3-32          , VID: V01 , SN: FOC165248EF
NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 5", DESCR: "PVDM3 DSP DIMM with 32 Channels"
PID: PVDM3-32          , VID: V01 , SN: FOC17080NSH
NAME: "C2921/C2951 AC Power Supply", DESCR: "C2921/C2951 AC Power Supply"
PID: PWR-2921-51-AC    , VID: V03 , SN: QCS1650H162
I read the help guide, but I dont quite understand this.

VWIC3-2MFT-T1/E1 is the card that will allow you to connect 2 seperate E1 circuits to it.
PVDM3-32 will allow conversion from TDM (E1) to voip, depending on which codec you are going to use each call will either use 1 PVDM channel (low/medium complexity i.e. G711), or 2 channels (high complexity, i.e. G729R8).
HTH,
Chris

Similar Messages

How to for dummies: sync itunes with pc to import pics from apple iphone 5 to pc???

1)   How to for dummies: sync itunes with pc to import pics from apple iphone, 5c, 7.1.2., to pc?
2)   How to delete photos from iphone (when I pick a pic there's no option to delete from trash icon)?
3)   How do I get the app (VS) VarageSale back on my phone screen? It is only listed in settings > notifications.
4) Or how do I delete the VS from settings, so I can reinstall?
NOTE: I have been to Verizon and they could not help me and it is too far to go to an apple store. I have downloaded the apple manual and it is toooooo technical for me.

If you don't have a backup of your pc, you will have to use a third party solution to get your music back. Wiki has a [comparison of ipod managers|http://en.wikipedia.org/wiki/Comparisonof_iPodManagers] here which you can look through to see if any meet your needs. I have used [CopyTrans|http://www.copytrans.net/copytrans.php] successfully but I did purchase it so I don't know what the free version supports.
You can [download purchased Apps for free|http://support.apple.com/kb/HT2519] but that won't work for music, movies, etc.
Hope that answers your question. Sorry about your lack of backup. Better luck next time.

How to give user rights to a folder (for Dummies, please help)

My userid, db2inst1, does not have rights to create, edit, and view files in it's home folder and subdirectories.
/export/home/db2inst1
I try to edit and view files in the sub folders, but get access denied. I thought it should have full rights to this folder?
I tried using the SMC as root, added the user db2inst1 to root and sys groups, then gave the user all rights, but that did not solve the issue.
What would be the terminal command to give this user, db2inst1, full rights to the home directory. It needs all rights to files created by other users. What ever is in the home folder and all subfolders under home, it needs the maxiumum access.

The short answer would be "chown -R <username> /export/home/<username>" where username is the user in question.
To be more polite you also need to change group ownership of users home folder to match primary user's group. Primary group can be seen by typing "id <username>", first group is the primary. If you know the group then you can do "chown -R <username>:<groupname> /export/home/<username>"
p.s. if you got to this because you created user with "useradd", then remember next time to use -m flag which creates user's home directory with apropriate permissions.

Colour management for dummies please

I have seen many discusions about ink limits and colour profiles but can anyone offer a dummies' guide?!
I use CS5 and in Bridge it is set to Europe Prepress 3. My understanding is that this should take care of things but when I make a PDF of my job and preflight it in Acrobat I get an ink limit warning. The profile of the placed Photoshop file (which is CMYK) is FOGRA39, as is the InDesign file (obviously, as this is defined by Prepress 3). So if I make a PDF X-1a shouldn't all that control the ink limit?
I have found that if I switch the Photoshop file to RGB then it works fine - I can see in InDesign separations preview that ink is OK, and the PDF preflights OK in Acrobat. So that tells me that the ink control happens when a conversion is required. The general wisdom seems to be that for CMYK print, files linked to InDesign should be CMYK not RGB (though to me, RGB seems to work fine as it gets converted at PDF stage), so how do I limit the ink if the file is CMYK? Should my Photoshop file not be colour managed perhaps? I read in a forum that Photoshop restricts the ink limit according to the colour profile being used, but that doesn't seem to be happening for me.*
I called Adobe and their best shot was that I should switch CS5 to North America Prepress, and use the 'High Quality Print' PDF preset. Well maybe I'm taking it too literally, but I'm In England and have a job which is about to be printed in Hungary! And also, this yields a US Web Coated (SWOP) v2 profile which doesn't seem right as I will be printing sheetfed.
I would appreciate it if someone could straighten me out.
* I tested this by switching the Photoshop file to Web Coated FOGRA28 and the colour values did change to allow for a lower ink limit, so maybe there's something in that. So why doesn't FOGRA39 do it? With the colour set to FOGRA39 Photoshop happily accepts a nice black blob coloured as 100% each of C,M,Y and K.
Sorry if this is a bit long but it seems like a useful discussion for Colour management newbies.

I read in a forum that Photoshop restricts the ink limit according to the colour profile being used, but that doesn't seem to be happening for me.*
Total Ink limit is a parameter of a CMYK profile—so the limit won't be exceeded when you make a color conversion from any other color space into that profile's color space, i.e AdobeRGB>FOGRA39, or US Sheetfed Coated>FOGRA39. However, once the file is converted to CMYK there's nothing stopping me from exceeding the limit via a color correction. For example, I could convert a PS file filled with 0|0|0 RGB to FOGRA39 CMYK and the ink limit would not exceed the 330% defined in the FOGRA39 profile, but as you noted I could also fill the resulting CMYK file with 100|100|100|100 and exceed the 330% limit.
Also, there's nothing stopping me from assigning the FOGRA39 profile to any CMYK file. In that case there's no color conversion—I could make a new SWOP Coated CMYK file, fill it with 100|100|100|100, assign FOGRA39, and the fill would still have 400% total ink.
Total ink is only limited via a color conversion
The general wisdom seems to be that for CMYK print, files linked to InDesign should be CMYK not RGB (though to me, RGB seems to work fine as it gets converted at PDF stage)
The general wisdom is actually old conventional wisdom, there's nothing wrong with making the conversion from RGB to CMYK when you export—the resulting CMYK values will be no different than the ones you would get out of PS assuming the source and destination profiles, and rendering intents are the same. The no RGB rule is a hangover from when you couldn't make color managed color conversions inside a page layout program.

Firewall explanation for dummies please

Hi - I read with interest, and total incomprehension, the long thread on Leopard security. I've been reading alot and understanding verrry little for a while now and I would love a clear and direct set of instructions/info on what I should do please.
I'm going to be setting up an airport extreme base station router. I have a modem connected into the phone socket and will be using a wireless network connecting a new iMac and my old, Panther running powerbook. I won't be trying to access either comp from out of the house and nothing else will be connected.
I thought that a firewall was a security device protecting the user from internet intrusion but I think I just read - no doubt misunderstood what I read - that the firewall protects you from your own apps/softwear. Now I am completely lost. So could some kind soul, in the know, tell me and the many, many others who have absolutely no tech back ground whatsoever,
a) is Leopard's firewall adequate
b) if not, is it adequate if behind a router such as airport extreme
c) if you want to be able to use the softwear on the comp - mail/iWork/iTunes etc, what setting should you chose for the firewall please
d) is it necessary to get a third party product or is that going to cause more probs than it solves if you have not idea how to configure it beyond the ability to follow menues
e) did I miss anything?
I'd be so grateful to know whether I need to fret about buying stuff from Amazon or secure online stores, or doing online banking.
Many thanks for your time

Laughinggravy wrote:
Hi - I read with interest, and total incomprehension, the long thread on Leopard security. I've been reading alot and understanding verrry little for a while now and I would love a clear and direct set of instructions/info on what I should do please.
I'm glad you posted the question. There is a great deal of misunderstanding about security issues and firewalls in particular.
First of all. A firewall is not what almost everyone thinks it is. It is not designed to protect you. It is designed to allow access to specific ports on your machine. To repeat, a firewall is not designed to keep people out, but to let them in.
The only people who really need to use a firewall at all are people who run servers. When you are running a server, you do want a firewall to control access to specific services. There are lots of people who are spouting off about firewalls these days. Only a tiny fraction of those people are network administrators who know what they are talking about.
If your computer is behind a NAT router (with the default settings, not DMZ) then you are quite secure. You aren't going to need a firewall at all. You shouldn't connect your computer to the live Internet unless you really know what you are doing. If you must connect without a router, then you should turn on your firewall, tell it to deny everything, and don't run any sharing software.
I'd be so grateful to know whether I need to fret about buying stuff from Amazon or secure online stores, or doing online banking.
Any reputable internet business (Amazon definitely qualifies) is going to be more secure than any other credit card transaction. Almost all of the "Internet credit card hacks" are actually people hacking into a "brick and mortar" store via the Internet and stealing credit card information of people who paid in person. The online sales are the transactions that are less likely to be stolen. These thefts could have been easily prevented by a network administrator who knew how to use a firewall.

Blacklist text procedure for Dummies please!

I figured out why PP CS4 is unstable at start-up. I thought it had stopped doing this but in my Stero Effects folder are about 7 music VSTs listed. PP will start up sometimes and shut down at other times . It's about 50-50. So, I was reading about a way to block VSTs from loading using the "black list text". It wasn't very clear to me. Is there a tutorial somewhere on how to go about this?

I couldn't get the "blacklist.txt" thing to work so I just move the offending VSTs to a folder on my desktop while I'm in PP.

Can we assign two values to the same parameter? If yes how? For details ple

Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
I want to do this to print two documents(values) with a single command (parameter)
Anybody please help quickly,
Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
JAVA PROGRAM:
<param name="QUERY" value="REPORT_TEST1"/>
function PrintReport(typePaper) {
document.title ='Report';
if (typePaper == "0")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
if (typePaper == "1")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
var openCMD='<SAP_BW_URL>';
openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
openCMD += CurrentReportName;
openWindow(openCMD,'MainTitleNow',800,600);
The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
Please help.
THANX A LOT,
SRINI

Hi,
Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
In the function get the parameter value and seperate the values using the same delimiter.
<param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
Regards,
Uma

Some calendars in iCal appear corrupted but OK on iPhone. If I sync will the calendar data on the phone restore info on the desktop iCal? any other ideas for how to sort this please?

Some calendars in iCal appear corrupted (ie have red exclamation mark by them) but are still OK on iPhone. If I sync, will the calendar data on the phone restore info on the desktop iCal or will I lose that as well? Or could I back up the calendars on my iPhone somewhere and then import them into iCal? any other ideas for how to sort this please? it's driving me mad. thanks.

I don't think there will be a solution to this. Exchange 2003 just isn't supported.

I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking to usa a disk instead. Where or how can I download the software available for that, please reply

I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking me to usa a disk instead. Where or how can I download the software available for that, please reply... thaks. (",)

Bluetooth file transfer has never been supported with iOS devices.

I just got an iPhone 4s and I added a passcode, the problem is I forgot my passcode. It says 'iPhone is disabled' but it doesn't say how long for or connect to itunes. How can I get my phone back? Any help please:'(

My iPhone is locked and doesn't tell me how long for, and it doesn't say to connect to itunes... Please help me:(

It did not work on mine It just turned it off then I tried to remember my pass code and it locked me out again, Also when i get on itunes it says it cant do anything for me because there is a passcode on my phone

Hi my name is steve arsenault i am looking for a short keys for apple and if someone has one i like to know how to use it please e-mail me has soon has posible thank you

hi my name is steve arsenaulti am looking for a short keys for apple and if someone has one i like to know how to use it please e-mail me has soon has posible thank you
<E-mail Edited by Host>

It sounds like you are looking for a program like Typinator.
It isn't free, and the site doesn't specify compatibility with any OS above 10.7.
As of today, the latest release is dated May 29th, 2012.

HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

capriz wrote:
i have just updated my old 3GS ...
To what... iOS 7 is Not supported on the 3 GS

TS1424 I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??

I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??

I got this error with my iPad 3, my wife's iPhone 4, but not with my iPhone 4s.

I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.

Hi,
I have an iTouch. I'd like to download some free apps. but I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

Hi i got a few free app before and did not download them completely and dont want to do this but they stay in my download list and start automatly when i connect to itunes store and going to crazy me how can i remove them from my account for ever please h

hi
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help me
thank you

Try Here > https://discussions.apple.com/thread/4074945?tstart=0

DSP resources? - How to for dummies please.

Similar Messages

Maybe you are looking for