DSR-11 not working properly when updated to OS 10.4 & FCP 6

IS the DSR-11 compatible with OS 10.4 & FCP 6?
when i opened fcp after updating the OS and FCP, it said it cannot recognise the firewire device. i clicked ignore and opened log & capture and it says "tvr ok" but i get no video...
any thoughts?

Many (w-a-y too many) people have had terrible (way too terrible) upgrade experiences with their Firewire systems failing to recognize their old gear. You can search for the error message you are seeing or DSR11 (dsr-11 DSR-11) and see what shows up.
In my case, my dsr11 drops offline about twice a week. I often just shut down, wait a few minutes and reboot the Macintosh to reset the FW bus (that's what I've been told this does, rests the FW bus).
If yo continue to be unable to use your FW input, try trashing the prefs files (search this forum for FCP RESCUE or TRASHING PREFS) for some help on doing that.
bogiesan

Similar Messages

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Music does not sync properly when updated to latest version. Can see computer but can't play from ipod

Music does not sync properly when updated to latest version. Can see on computer but can't play from ipod.

Hope this helps...
I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh. The following steps worked for me:
1. Open itunes and connect iphone 5 if not already. Uncheck all playlists, artists, etc. till nothing is checked to sync. Then uncheck the sync music box so that all music will be removed from the phone. Sync iphone
2. Eject device. Quit itunes (don't just close). unplug iphone.
3. Restart imac, macbook, or PC.
4. Restart iphone.
5. Now after power up, restart itunes then plug in iphone, check sync music and select music to sync. Sync iphone
6. It worked for me!!! Good luck.

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

My macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing.

my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing

Gray, Blue or White screen at boot, w/spinner/progress bar

Swf is not working properly when upload to server

I develop 1.swf which is having 3 buttons each one having
anather .swf to call 2.swf, 3.swf respectively.
This application is running perfectly on my PC, but
While uploading the swf to server the 2.swf and 3.swf is
not running. Can any one tell how to recover from this kind
of problem.

justbipin wrote:
> basically my code working perfectly,
> but its not working properly when upload to server
> can anybody having any ref. or link to solve this
issues.
why is that we insist on seeing the source file ?
There is no one way of doing things in flash and no one can
help
you based on "does not work description".
This is way to broad of a subject to even try to guess.
Same as asking "my car does not work, what's up with
that"....
Please upload the problematic file and provide url for us to
check.
Otherwise you need to try to troubleshoot it yourself as we
can't
guess from here what possibly is wrong with that file.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

TS1630 My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

You might like to define "not working properly".

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Flip Card Animation is not working properly when Button's PointOver State remain Activated.

I am facing problems with flip car animation which is not working properly when its mouse point over state remains activated but it works perfect when its tapped two times and instantly change pointer position. Kindly Help me out as soon as possible.
Code is here:
Xaml:
<Image Name="imgCapital" RenderTransformOrigin=".5,.5" Tag="1" Tapped="imgCapital_Tapped">
<Image.Projection>
<PlaneProjection RotationY="0"/>
</Image.Projection>
</Image>
<Image Name="imgSmall" RenderTransformOrigin=".5,.5" Tag="2" Opacity="1" Tapped="imgSmall_Tapped">
<Image.Projection>
<PlaneProjection RotationY="-90"/>
</Image.Projection>
</Image>
Storyboard:
<Storyboard x:Name="FlipOpen">
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgCapital">
<EasingDoubleKeyFrame KeyTime="0:0:0" Value="0"/>
<EasingDoubleKeyFrame KeyTime="0:0:0.4" Value="90"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgSmall">
<EasingDoubleKeyFrame KeyTime="0:0:0.4" Value="-90"/>
<EasingDoubleKeyFrame KeyTime="0:0:0.8" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
<Storyboard x:Name="FlipClose">
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgCapital">
<SplineDoubleKeyFrame KeyTime="0:0:0.4" Value="90"/>
<SplineDoubleKeyFrame KeyTime="0:0:0.8" Value="0"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgSmall">
<SplineDoubleKeyFrame KeyTime="0:0:0" Value="0"/>
<SplineDoubleKeyFrame KeyTime="0:0:0.4" Value="-90"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>

Actually i simply want flip card animation which is not working here in my code. When i tapped button to invoke animation its behavior not exactly flipping. Its one side work properly but other collapsed suddenly not rotate if i keep mouse right at
the button, but if i change mouse pointer at that very time after tapping it works properly. Mouse Pointer Over mean screen points where i tapped.
Triggered Function is here:
private void btnChangCase_Tapped(object sender, TappedRoutedEventArgs e)
if(isCaseChanged==false)
isCaseChanged = true;
FlipOpen.Begin();
else if(isCaseChanged==true)
isCaseChanged = false;
FlipClose.Begin();

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing it again on my new computer?

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

Music/iTunes Match not working properly since update to iOS 7

Music/iTunes Match not working properly since update to iOS 7

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

Do you have any filters applied to your clips?
This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
Anywho, export again, this time with "self contained" movie selected.
Then try to import to Compressor.

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

DSR-11 not working properly when updated to OS 10.4 & FCP 6

Similar Messages

Maybe you are looking for