DSRM black screen issue with 2012R2 DC running on 2012R2 Hyper-V

Hi!
I have been testing AD disaster recovery with few domain controllers (Server 2012R2), running on Server 2012R2 and Hyper-V. Everything OK unless I try to log in to Domain Services Recovery Mode.
After username&passwd screen goes all black and nothing happens. Every time, every server (tested this with 3 different HP workstations, one HP ML350G6 server and one laptop). Hyper-V virtual machines tested both gen1 and gen2.
With 2008R2 Hyper-V and same domain controller on it everything works fine. This makes systemstate restore bit more difficult.
Am I missing something or is it just a bug? Googling didn't help this time.

Hi makapaka471,
"I managed to made this "black screen" with non virtualized operating system as well when I was testing it with 10 computers and booting them to DSRM. All identical machines, installed from same source. "
It shouldn't happen .
Did you try to download a new  ISO then test  it again ?
I will test that and update .
UPDATE: 
I installed a server 2012r2 DC on hyper-v 2012r2 , backed up the system state  and then restored it back , it worked well when running DSRM .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Air 3.3 beta PC audio distortion / Air 3.1 / 3.2 Mac black screen issue

    Hi there,
    I've recently released a large game coded in Flash Builder with Air (www.lonesurvivor.co.uk), and I used Air 3's captive runtime feature to bundle it for Mac and PC.
    The initial build used Air 3.2 and for a large proportion of OSX users, there were no visuals at all, just sound and the game obviously working underneath.  This caused a very large support issue, and took several weeks to deal with, as well as having to maintain a seperate Projector version for those for whom the Air version wouldn't work.  I wish I had known that the game would fail on some Macs, but unfortunately the issue showed up on none of the ones tested.
    I'm about to launch the updated build of the game which uses Air 3.3 beta 1, as it seems to fix the black screen issue for all those who experienced it.  I was very happy that Adobe have managed to iron this out, even if there was no response to the bug I entered into bugbase.
    The problem is, on a final test on XP SP2, the 3.3 beta version produces what appears to be filtered graphics... which is how the Mac version has always appeared, but the PC version of the game seemed to use what looked like nearest-neighbour sampling in Flash's fulllscreen upscaling, which looked good for the zoomed pixel art in this game. 
    This is a small cosmetic issue, but there is another one whhich is far more severe - the audio has become extremely distorted, and is now unlistenable.
    So with 3.2 giving me no visual on Macs and 3.3 giving me unlistenable audio on PCs, I will now have to maintain two versions again.  I really would like to keep one project I can quickly make changes to, but the seperate problems in different platforms means I lose out on the great cross-platform functionality of Air.  I'm hoping this is a known issue, but I couldn't find it on google / bugbase / these forums. 
    Could these two issues be related - is hardware acceleration not working or something?  Somehow I think it is, because the XP test machine is quite old, and tended to fall over with the game running in software mode in a Flash projector.
    I tried swapping out the Air 3.3 runtime for the previous 3.2 I shipped with, and editing the XML desciption to make sure it was set to use that and, sure enough, the game worked as it did before.  So there is definitely something up with the beta.  I'm just glad I caught this problem before I shipped as going to save me thousands of emails of support!
    So I guess my question is - is this a known issue?  And if so, do you have any workarounds / or are Adobe working on a fix?

    Hi Chris,
    Thanks for the prompt response - I guess I should have tried the forums instead of the bugbase last time...  It really was a support nightmare!  Not least because I had to deal with the problem of saved games being wiped by over-zealous browsers on the backup Projector version I was supplying Mac customers with.
    Fortunately the Mac Air 3.3 runtime works great. 
    Out of interest - there is still the difference in GPU scaling used between Mac and Windows though, which there always has been since it was introduced (is this a known issue btw?)
    Which leads me to the 3.3 beta 2 - I tried it out last night, and while it corrected the blurry graphics (the scaling appeared nearest neighour again on XP), the audio suffered the same distortion.
    In addition, I had several other XP / Vista / Win 7 users test out the build, and the user with XP SP3 also suffered the issue.
    So I'm planning to ship the PC version with 3.1 as it worked well for the first release, and use 3.3 beta 1 for the Mac version.  Unfortunately I've run out of time and need to get it out there!
    I'd definitely be interested in getting into the pre-release program.  I'll write you an email and send the builds of the game too.
    Cheers,
    Jasper

  • BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT

    BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
    Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
    How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
    I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
    Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
    Errors:
    I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
    I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
    BIOS:
    Also, the time was set to 1988 or something in the BIOS.
    Event Viewer events found:
    1. Kernel-Power, Summary page.
    There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
    "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
    2. Kernel-Processor-Power - Event ID 37, task category (7)
    "The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
    3. LMS - HCMI - Event ID 2, Task Category: none
    "LMS Service cannot connect to HECI driver".
    I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
         MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
    What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
    SYSTEM INFO:
    Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
    Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
    Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
    Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1

    T61-Elwood wrote:
    Laptops of all Brands using Nvidia GPUsmade  from 2007-2008  are faulty.
    You wont get good Nvidia ones on Ebay/forumes anywhere.
    I'd beg to differ on both accounts.
    *61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
    As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • The Windows 7 Black Screen Issue

    I am putting in Bootcamp with a Windows 7 install. I checked these forums and made sure I had all my prep work done.
    I referenced article TS3173 and downloaded the neccessary drivers for 7, formatted a 16GB SD Card as FAT Bootable and copied the drivers and autounattend.xml files onto the root of the drive.
    THe installation as going as planned but at the end I'm still ending up with a black screen. Windows is installed ok but on the restart after" Preparing for FIrst Use" comes up the screen goes black.
    Obviously, the drivers are not being installed from the SD card, I tried it on a USB External driver as well. Am I missing something here? I read every post I could find on it and I can't see where I am doing anything incorrectly.
    Thanks
    Tom

    You don't need Paragon or another NTFS driver. That may work (I've used it, but I was using a full hard drive anyway to begin with).
    Apple's method:
    http://www.apple.com/support/bootcamp/
    *My iMac (27-inch, Late 2009) displays a black screen during installation of Microsoft Windows 7 using the Boot Camp Assistant. How do I fix it?*
    The Windows 7 installer does not include required graphics or Bluetooth drivers for this computer. To obtain the necessary drivers and resolve the issue, see this article (creating the SD card and drivers for the "black screen" issue).
    http://support.apple.com/kb/HT3986
    http://support.apple.com/kb/TS3173

  • PrE 12.  How to deal with black screen "Created with Adobe Premiere Elements trial version"?

    I'm really considering purchasing PrE 12 and would like to try it out.  (I have another video editing software and would like to try this one.)
    When I add video, I get a black screen "Created with Adobe Premiere Elements trial version".  When I hit play, I can hear audio, but I don't get any video (just the black screen).  Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen? 
    Thanks,

    To help with troubleshooting, some questions so people have more to work with
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Elements FAQ http://forums.adobe.com/thread/1042180
    And, exactly what are you editing?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Macbook only boots with black screen along with a load of jargon

    --------------------------------------------------------------------------------
    I installed a java and an intel secuirty update on my macbook pro after that i etsrated my mac and it was then taking ages to boot back up and then afte a while a black screen appeared with a load of jargon on which said the following
    Launchd:com.apple.ni.blindd: Exited abnormally: Bad system call
    Launchd:com.apple.ni.blindd: respawning too quickly! throttling
    Launchd:com.apple.ni.blindd: 3 more failures without living at least 60 seconds will cause job removal
    Launchd:com.apple.ni.blindd: will retart in 10 seconds
    mDNSResponder-108.6 (Jul 19 2007 11:41.28)[153]: Starting
    Launchd: com.apple mDNSResponder: exited abnormally: Bad system call
    Launchd:com.apple.mDNSResponder:Launchd:com.apple. syslogd: exited abnormally: Bad system call
    Launchd:com.apple.mDNSResponder: 2 more failures without living at least 60 seconds will cause job removal
    Launchd:com.apple.mDNSResponder: will restart in 10 seconds
    Launchd:com.apple.syslogd: exited abnormally: Bad system call
    Launchd:com.apple.syslogd: respawning too quickly! throttling
    Launchd:com.apple.syslogd: 2 more failures without living at least 60 seconds will cause job removal
    Launchd:com.apple.syslogd: will; restart in 10 seconds
    Launchd:com.apple.KernalEventAgent: exited abnormally: Bad system call
    If anyone can make sense of this or has had happen before. any ideas on what it means and help on solving this problem
    Thanks

    Hi Spongeofthedead
    did you get this problem solved, my macbook is doing exactly the same thing!!
    all the disk repair etc does not seem to work..
    i think i ve killed it any help would be very much appreciated..
    cheers
    gt

  • Is anyone having any uneven or discoloured screen issues with iPad mini or iPad 4th Gen?

    Hello, in view of the fact that many users had screen discolouration issues and uneven backlight issues with the iPad 3rd Gen, I wonder if those issues have been sorted out. Has anyone here had any screen issues with the iPad mini, or the iPad 4th Gen?

    No.

  • Killer NIC with ASUS R9 290 black screen issues

    Hi there,
    I've just set up a gaming system with the B85-G43 Gaming board and an ASUS R9 290 (oc r9290-dc2oc-4gd5) and I've stumbled across a strange problem. Within 5 minutes I get a black screen and the only way to get out of it is to reset my computer. It freezes, but doesn't stop working immediately.
    So... I've been testing with W7, W8 and W8.1 and no difference. Until... I shut down my network card and no black screens anymore. Also, when I disable my R9 290 in the device manager there are also no black screens anymore. So I should search it in the combination. I've installed all the newest drivers, but no luck.
    Has anyone come across the same issue and how did you solve this? I'm getting really frustrated about it...
    Thanks for your help guys!

    Quote from: Nichrome on 20-January-15, 19:56:04
    There is no chance this will work together.
    Radeon R9-290   - 31A and a 550W psu minimum
    Test stronger power supply. And that might be why you also have issues with other things like in this case, Killer NIC
    Ok I've tested your suggestion and replaced the PSU with a cooler master G750M 750 Watt.
    Exactly the same problem. I keep getting black screens as soon as I log into windows and the radeon drivers are kicking in. When i disable the radeon drivers: no black screens at all. As soon as i re-enable them: black screen...
    Anyone have any other suggestions. Currently I've RMA'd my Asus R9 290. Maybe it'll help but I don't have any confidence....
    Thanks!

  • Can't fix fglrx/Xorg black screen issue, no matter what I try!

    I've tried everything that I can think of or find online to fix this. Please help.
    I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx I just get a black screen that won't accept any input, although ssh'ing into the box while this is happening still works.
    I've been reading forum posts for *days* now trying to get this to work. I've tried every combination of 12.4/12.6 drivers, Xorg 1.11/1.12 and modeset/nomodeset kernel parameters. I definitely do not have any radeon or other DRI modules compiled into my kernel. I have an HD4200, SLiM/Xfce4, and I'm using the proper catalyst-hd234k package. The fglrx module has been compiled for my kernel and added to my initramfs, and it loads at boot. lsmod reveals its presence and does *not* show 'radeon'. I have uninstalled every video driver aside from fglrx and Xfree86-vesa. Output does not seem to be going to HDMI instead. Switching consoles/typing blindly does not work, and I need to hold the power button for 5 seconds to shutdown. I've run aticonfig --initial and tried aticonfig --acpi-services=off, too.
    I've tried *all* the different tweaks that I've found to try to make a working xorg.conf, but here's what I'm trying to use now:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    #Section "Module"
    # Load "extmod"
    # Load "dri"
    # Load "glx"
    # Load "dri2"
    # Load "record"
    # Load "dbe"
    #EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:5:0"
    Option "EXAPixmaps" "off"
    Option "XAANoOffScreenPixmaps" "true"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1024x768"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1680x1050" "1440x900" "1366x768"
    EndSubSection
    EndSection
    My Xorg log seems fantastically uninformative, since it seems to show the fglrx module loading and does not report any errors:
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 19.388] X Protocol Version 11, Revision 0
    [ 19.388] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 19.388] Current Operating System: Linux splice 3.5.3-1-ARCH #1 SMP PREEMPT Tue Sep 18 00:11:37 EDT 2012 x86_64
    [ 19.388] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=228ebc5f-ada6-4d9c-9e93-fc645085e5cd ro quiet nomodeset resume=/dev/sda5 init=/bin/systemd
    [ 19.389] Build Date: 27 August 2012 08:04:39AM
    [ 19.389]
    [ 19.389] Current version of pixman: 0.26.2
    [ 19.389] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 19.389] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 19.389] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 18 07:02:13 2012
    [ 19.496] (==) Using config file: "/etc/X11/xorg.conf"
    [ 19.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19.769] (==) ServerLayout "X.org Configured"
    [ 19.769] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 19.769] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 19.790] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 19.790] (**) |-->Input Device "Mouse0"
    [ 19.790] (**) |-->Input Device "Keyboard0"
    [ 19.790] (==) Automatically adding devices
    [ 19.790] (==) Automatically enabling devices
    [ 19.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 19.993] Entry deleted from font path.
    [ 20.193] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 20.193] Entry deleted from font path.
    [ 20.193] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 20.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 20.196] Entry deleted from font path.
    [ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 20.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 20.196] Entry deleted from font path.
    [ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 20.196] Entry deleted from font path.
    [ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 20.196] Entry deleted from font path.
    [ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 20.196] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 20.196] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 20.196] (**) Extension "Composite" is disabled
    [ 20.196] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 20.196] (WW) Disabling Mouse0
    [ 20.196] (WW) Disabling Keyboard0
    [ 20.196] (II) Loader magic: 0x7c8b00
    [ 20.196] (II) Module ABI versions:
    [ 20.196] X.Org ANSI C Emulation: 0.4
    [ 20.196] X.Org Video Driver: 12.1
    [ 20.196] X.Org XInput driver : 16.0
    [ 20.196] X.Org Server Extension : 6.0
    [ 20.198] (--) PCI:*(0:1:5:0) 1002:9712:17aa:21b8 rev 0, Mem @ 0xc0000000/268435456, 0xd0400000/65536, 0xd0300000/1048576, I/O @ 0x00009000/256
    [ 20.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 20.198] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 20.198] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 20.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 20.198] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 20.198] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 20.198] (II) "dri2" will be loaded by default.
    [ 20.198] (II) LoadModule: "extmod"
    [ 20.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 20.468] (II) Module extmod: vendor="X.Org Foundation"
    [ 20.468] compiled for 1.12.4, module version = 1.0.0
    [ 20.468] Module class: X.Org Server Extension
    [ 20.468] ABI class: X.Org Server Extension, version 6.0
    [ 20.468] (II) Loading extension MIT-SCREEN-SAVER
    [ 20.468] (II) Loading extension XFree86-VidModeExtension
    [ 20.468] (II) Loading extension XFree86-DGA
    [ 20.468] (II) Loading extension DPMS
    [ 20.468] (II) Loading extension XVideo
    [ 20.468] (II) Loading extension XVideo-MotionCompensation
    [ 20.468] (II) Loading extension X-Resource
    [ 20.468] (II) LoadModule: "dri"
    [ 20.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 20.545] (II) Module dri: vendor="X.Org Foundation"
    [ 20.545] compiled for 1.12.4, module version = 1.0.0
    [ 20.545] ABI class: X.Org Server Extension, version 6.0
    [ 20.545] (II) Loading extension XFree86-DRI
    [ 20.545] (II) LoadModule: "glx"
    [ 20.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 20.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 20.685] compiled for 6.9.0, module version = 1.0.0
    [ 20.685] (II) Loading extension GLX
    [ 20.685] (II) LoadModule: "dri"
    [ 20.685] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 20.686] (II) Module dri: vendor="X.Org Foundation"
    [ 20.686] compiled for 1.12.4, module version = 1.0.0
    [ 20.686] ABI class: X.Org Server Extension, version 6.0
    [ 20.686] (II) LoadModule: "record"
    [ 20.686] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 20.716] (II) Module record: vendor="X.Org Foundation"
    [ 20.716] compiled for 1.12.4, module version = 1.13.0
    [ 20.716] Module class: X.Org Server Extension
    [ 20.716] ABI class: X.Org Server Extension, version 6.0
    [ 20.716] (II) Loading extension RECORD
    [ 20.716] (II) LoadModule: "dbe"
    [ 20.717] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 20.742] (II) Module dbe: vendor="X.Org Foundation"
    [ 20.742] compiled for 1.12.4, module version = 1.0.0
    [ 20.743] Module class: X.Org Server Extension
    [ 20.743] ABI class: X.Org Server Extension, version 6.0
    [ 20.743] (II) Loading extension DOUBLE-BUFFER
    [ 20.743] (II) LoadModule: "dri2"
    [ 20.743] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 20.811] (II) Module dri2: vendor="X.Org Foundation"
    [ 20.811] compiled for 1.12.4, module version = 1.2.0
    [ 20.811] ABI class: X.Org Server Extension, version 6.0
    [ 20.811] (II) Loading extension DRI2
    [ 20.811] (II) LoadModule: "fglrx"
    [ 20.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 22.869] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 22.869] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.869] Module class: X.Org Video Driver
    [ 22.871] (II) Loading sub module "fglrxdrm"
    [ 22.871] (II) LoadModule: "fglrxdrm"
    [ 22.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 22.979] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 22.979] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.979] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 22.979] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
    [ 22.979] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
    [ 22.979] (++) using VT number 7
    [ 23.041] (WW) Falling back to old probe method for fglrx
    [ 23.355] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 23.449] (--) Chipset Supported AMD Graphics Processor (0x9712) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
    [ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
    [ 23.465] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 23.477] (II) AMD Video driver is signed
    [ 23.478] (II) fglrx(0): pEnt->device->identifier=0x1cdc440
    [ 23.478] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    [ 23.478] (II) Loading sub module "vgahw"
    [ 23.478] (II) LoadModule: "vgahw"
    [ 23.478] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 23.488] (II) Module vgahw: vendor="X.Org Foundation"
    [ 23.488] compiled for 1.12.4, module version = 0.1.0
    [ 23.488] ABI class: X.Org Video Driver, version 12.1
    [ 23.489] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 23.489] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 23.489] (==) fglrx(0): Default visual is TrueColor
    [ 23.489] (**) fglrx(0): Option "DPMS" "true"
    [ 23.489] (==) fglrx(0): RGB weight 888
    [ 23.489] (II) fglrx(0): Using 8 bits per RGB
    [ 23.489] (==) fglrx(0): Buffer Tiling is ON
    [ 23.508] (II) Loading sub module "fglrxdrm"
    [ 23.508] (II) LoadModule: "fglrxdrm"
    [ 23.508] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 23.508] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 23.508] compiled for 1.4.99.906, module version = 8.97.2
    [ 23.525] ukiDynamicMajor: found major device number 251
    [ 23.526] ukiDynamicMajor: found major device number 251
    [ 23.526] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [ 23.526] ukiOpenDevice: node name is /dev/ati/card0
    [ 23.526] ukiOpenDevice: open result is 12, (OK)
    [ 23.526] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 23.526] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [ 23.526] (**) fglrx(0): NoAccel = NO
    [ 23.526] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [ 23.526] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
    [ 23.526] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x21b8)
    [ 23.526] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [ 23.526] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 23.526] (--) fglrx(0): MMIO registers at 0xd0400000
    [ 23.526] (--) fglrx(0): I/O port at 0x00009000
    [ 23.526] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 23.555] (II) fglrx(0): ATIF platform detected
    [ 23.556] (II) fglrx(0): AC Adapter is used
    [ 23.576] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 23.582] (II) Loading sub module "vbe"
    [ 23.582] (II) LoadModule: "vbe"
    [ 23.603] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 23.617] (II) Module vbe: vendor="X.Org Foundation"
    [ 23.617] compiled for 1.12.4, module version = 1.1.0
    [ 23.617] ABI class: X.Org Video Driver, version 12.1
    [ 23.629] (II) fglrx(0): VESA BIOS detected
    [ 23.629] (II) fglrx(0): VESA VBE Version 3.0
    [ 23.629] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 23.629] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    [ 23.629] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
    [ 23.629] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    [ 23.629] (II) fglrx(0): VESA VBE OEM Product: RS880M
    [ 23.629] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 23.652] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [ 23.652] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    [ 23.652] (II) fglrx(0): PCIE card detected
    [ 23.652] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 23.652] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 23.655] (II) fglrx(0): Using adapter: 1:5.0.
    [ 23.663] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    [ 23.691] (II) fglrx(0): Interrupt handler installed at IRQ 18.
    [ 23.691] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 23.691] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 23.692] (==) fglrx(0): Center Mode is disabled
    [ 23.692] (II) Loading sub module "fb"
    [ 23.692] (II) LoadModule: "fb"
    [ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.722] (II) Module fb: vendor="X.Org Foundation"
    [ 23.722] compiled for 1.12.4, module version = 1.0.0
    [ 23.722] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.722] (II) Loading sub module "ddc"
    [ 23.722] (II) LoadModule: "ddc"
    [ 23.722] (II) Module "ddc" already built-in
    fglrxinfo while running Xorg without an xorg.conf gives me this:
    X Error of failed request: BadRequest (invalid request code or no such operation)
    Major opcode of failed request: 135 (GLX)
    Minor opcode of failed request: 19 (X_GLXQueryServerString)
    Serial number of failed request: 12
    Current serial number in output stream: 12
    And in a console it tells me that it can't open display(null)... all of which I suspect is expected behaviour when the driver is not actually in use. I just wish something would tell me what's actually *wrong*, here, instead of just expecting me to magically figure out exactly the right configuration that will actually let me use fglrx.
    I... I just want to be able to play minecraft. :`(
    Last edited by Medlam (2012-09-18 13:48:42)

    I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
    and http://wiki.cchtml.com/index.php/Configuring
    and I'm sure you've done
    aticonfig --initial
    I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
    What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver.

  • UIImagePickerController Custom Overlay Black Screen issue while using Video trimming controller

    Hello Everyone ,
    I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
    The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset  image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
    Handler Method ::
    [self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                                  completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                      AVAssetImageGeneratorResult result, NSError *error) {
    I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
    This issue occur in ios7 but not in ios6.
    Can anyone have any idea about this ...Please relply me ASAP.

    Hello Everyone ,
    I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
    The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset  image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
    Handler Method ::
    [self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                                  completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                      AVAssetImageGeneratorResult result, NSError *error) {
    I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
    This issue occur in ios7 but not in ios6.
    Can anyone have any idea about this ...Please relply me ASAP.

  • GS60 Ghost Pro 2PE Black screen issue

    Hi,
    After almost 2 months of usage one day the laptop screen started going black after logging in but the backlight is working (system still running fine, even works with HDMI) and it kept doing so at random times after desktop loads. I am writing this on HDMI because the display is not usable. Sometimes the issue would go away for some days then it starts again.
    Removing/reinstalling drivers and even reinstalling OS did not help, safe mode also has the problem and even I tried win 7 installation which gives black screen at setup stage. I almost tried anything software related but no lock, I also updated the bios.
    Unfortunately MSI service is far and it is costly for me to get there. Is it a common issue among this model?
    This guy has the same problem(see video), please read his first comment:
    I used MSI online support and they told me to update the EC but part of the process says remove the battery! How can I remove it while this model's battery is embedded inside it and is no removable? EC update did not help too.
    Thanks

    I sent it to RMA, they could not identify the issue ... now after 20 days they say their gonna send a new one. They got some money from me because they said they only had the SSD version available, while mine did not have to SSDs.  This Iranian distributor called Matrix is very disappointing.
    I am really worried that it might happen again with the new GS60 too. It was my first experience with MSI and it was not a good one 

  • Black Screen Issue

    Hello this is my first time joining this place. i have an issue with HP TouchSmart 300 PC.
    when I turn it on it blink HP logo for 1/2 second and Goes black I can hear the processing and it goes to Windows.
    all fans are working fine and little Green Light on the back next to the Power Cord is solid Green.
    here is what i have done so far.
    1: used standard pwr fix issue by unplugging the pwr cord all devices, hold the power button then plugged it back on pressed F10 key stuff.
    2: remove/reset the Memory sticks tested taking one at a time to see if that was an issue.
    3: replaced the inverter with a new one
    4: removed the Hard Drive to see at least the bios screen gives an error or even comes up to stay
    5: reseated the CPU cleaned out the Heatsink.
    I heard the HD causes this issue but it goes into windows I can hear the start up and when I push any key I can hear windows sounds.
    now is there any thing i missed out in troubleshooting. i can't figure it out can someone tell me what other thing could have been an issue.
    Again When System Powers On HP logo blinks once for half second and goes away. system do run into windows all fans works all lights works
    an early reply will be highly appreciated...
    Thank you

    Hello,
    Well, the only thing i can suggest, is something you have already tried, which is, to make a couple of more CPU reset.
    Just use the CPU socket lever to lock and unlock the CPU, even remove the CPU before doing this procedure and try to use the lever 3 to 6 times.
    See if this helps out, apart from this the only thing else to try, is to possibly do what you have already mentioned, to replace the system board.
    THanks,
    I work for HP! Please remember to provide and if this helped click ON

  • (Another) iMac G3 black screen issue

    All right, I'm sure questions about the CRT going black are pretty common, but I've scoured the net for fixes and am still coming up blank. Here's the problem...
    Just bought a used iMac G3, slot loader. I think it's one of the early ones, as there's no VGA port in the back under the pop-off plate to use a second monitor. The guy I bought it from knew nothing about its history other than "the screen doesn't work".
    Took it home, turned it on. The power light goes on, the hard drive spins, the screen makes those CRT sounds like it's going to come on, but it's completely black. So, I hit the forums and have tried the following solutions:
    1. Reset the PRAM.
    2. Replaced the PRAM battery with a new one.
    3. Remove the memory, then battery, then pressed the PMU button (once), waited, replaced the battery, then memory.
    4. Inserted an OS 9 CD, held down C during startup. Heard it spin around, didn't do much else.
    5. Gone into Firmware mode, reset the NVRAM.
    6. Let it boot up, waited till the hard drive stopped spinning, pressed the power button to try to put it to sleep. Nothing happened.
    7. Held the button on the side down while restarting. That may have been a bad idea, I dunno, but I was running out of things to do and figured it's probably already fried anyway. It beeped in acknowledgement, but no other changes.
    Any other ideas? I've hit all the places I can think of. I don't care much about saving anything on the HD -- I have no idea what's on it anyway -- but I'd like to get this running as it's intended to be used for a non-profit. As always, I'd like to make spending cash on a replacement part a final option; it seems people jump to that conclusion prematurely pretty often but it may be about that time...
    Last thing. If this thing is definitely dead, are there any parts inside worth salvaging? Maybe I can gut it and have a nice Macquarium. Any links to a good page on how to safely discharge the CRT and take this baby apart?
    Thanks in advance for any tips.
    iMac G3 (slot, 350?)    

    Hello and Welcome to Apple Discussions,
    I actually successfully took one of these iMac G3's completely apart and replaced the entire CRT component, leaving all other parts inside. The CRT in my machine did work before I replaced it, but it had a " dark shadow" which grew worse as time went on (making it hard to see), so I decided to replace it with a newer one. What I recommend you do is try one last thing because you just bought it. There are "hidden" CRT controls for the brightness and contrast inside of the bottom case (two plastic knobs). From what I am reading, it sounds like the entire CRT is bad and will not power on/function properly, but you can try to adjust the brightness/contrast anyway just to be sure. The fact that you hear the CRT sounds makes me think it is possible the brightness/contrast are all the way down, which would be why you only see a black screen when powered up. To locate these knobs follow the instructions below:
    1) After completely unplugged, place your iMac G3 upside down on a soft surface (such as a bed).
    2) Using a screwdriver, remove the two screws located near the front end of the machine.
    3) After removed, pull upward and remove the plastic housing.
    4) Look for two black knobs on the sides of the machine and plug in the power cord.
    5) After you hear the chime, turn the knobs back and forth to try to get a picture.
    6) If you do not see a picture, your CRT or (parts that connect to it) are probably broken.
    7) Remove the power cord.
    8) Replace the bottom plastic housing and screw it back together.
    I hope this helps you solve this issue you are having. If it does not work out, I will think of something else. Also, do you hear the start up chime and does the power light always remain lit green the entire time the machine is powered on?
    Jason

  • Rather Unusual Black Screen Issue

    Hi all,
    Can anyone help with this: I'm getting the black screen with the white "Play" arrow but only at one website that I can determine. I click the Play arrow and the arrow disappears but nothing happens. This is happening in IE v9, FireFox and Chrome (all latest versions). I've tried all sorts of settings combinations between the 3 browsers (as well as FP settings) and nothing works. I've tried to disable my AV and firewall. I've reinstalled the latest version of Flash Player.  I've played with the P2P settings. I can go anywhere else (including YouTube) and all videos are playing just fine. The issue "seems" to be isolated to just this one website: http://chat.foodlovers.com. Furthermore, if I remove the "chat" from the url, taking me out of the forums and to a different page on the site, the videos play fine, making me suspect that this is all related somehow to the "chat" in the url. Yet I can go to this site from another computer on the premise and the issue does not occur. I've been playing around with this for 2 days and I just can't seem to figure it out. Has anyone ever seen anything like this? Being able to view the many videos on this site is an important part of using and benefiting from the forums, so any help is greatly appreciated.
    Dell Precision M6500 Workstation
    OS: Windows7 64 bit / 16 GIG Ram
    Flash ActiveX Version: 11.0.1.152
    Flash Plug-in Version: 11.0.1.152
    Sorry, cannot locate the Version numbers on the browsers but they are all latest versions.
    Please let me know if any other info is needed to help diagnose.
    TIA,
    Barb

    Late last night I gave it one more shot with reinstalling Flash Player. I reinstalled the 64 bit version, although I thought the one I'd previously downloaded and installed was for both 32/64 bit. I also installed a shockwave plugin. To tell you the truth I'm not certain what I actually installed or perhaps did with setting adjustments (in browsers and AV), but one of these seemed to resolve the issue and I'm able to view videos on this site in all browsers. I am curious as to what you're referring to regarding this site using "wmode=window". Is that a setting I have to be aware of? And yes, I think I did post the link incorrectly, my apologies.
    Many thinks for all the support,
    Barb

  • Black screen issue on GX701

    I have issues with windows 7 on my notebook. Every now and then the screen turns black and it doesn't recognise my keyboard commands. I will have then to hold the power key for the system to turn off. I taught it was a hardware issue and i send it for repairs but they didn't saw anything. I taught this was doing to the video drivers. I tried all the drivers possible but with no result. I even modified ones for my card 9600 mgt. Maybe it is a bios issue. On linux it works fine.
    thanks for your help.

    Quote
    I tried all the drivers possible but with no result.
    Have you tried those? ==> http://eu.msi.com/index.php?func=driverfile&dno=7146&i=0

Maybe you are looking for