DST issues with -14 GMT!!

Hi Folks,
I have an application running on java 1.3.1_18, under bea /SQL server and windows 2000. The timezone is PDT. The datetime shows on the UI is -14 GMT ( like double the time zone difference). We updated the OS with appropriate patches with no luck!
What could be the cause or how to debug such issues?

j_hotch wrote:
> Anyone else have strange DST issues on 3/11 which
cleared up on 3/12?
> Specifically, castFromServer not applying DST on 3/11
but then starting to
> apply it on 3/12?
as i said, it's a mystery to us all ;-)
btw the latest timezone CFC uses java epoch offsets instead
of datetime objects.

Similar Messages

  • DST issue with 7940/7960 on CUCM 8.6.2

    Hi Guys,
    In the last 19 October, in any city of Brazil started of date summer time (DST), and the IP Phone models 7940/7960 not changed the time automatically. After restart physical or logical the IP Phone stay the correct time.
    7940
    Firmware de aplicação  P00308010200
    Firmware de inicialização  PC0303010200
    Versão  8.1(2.0)
    I read any posts in this forum, but, not is clear for me if this problem is related any bug or no. Any have idea about this?
    Thank You,
    Wilson

    Hi Wilson,
    There are a number of DST bugs that affect CUCM 8.6. I would have a look
    at the attached bugs . Did you install any of the DST/TZ Timezone updates for CUCM?
    Cisco Unified Communications Manager / Cisco Unity Connection
    Timezone Update 2013d
    Release Notes Version 1
    September 19, 2013
    Introduction:
    These release notes contain important information about installation procedures for the 8.6(2x) Timezone
    Update for Cisco Unified Communications Manager or Cisco Unity Connection.
    Note
    Before you install this Timezone Update, Cisco recommends that you review the
    Important Notes section for information about issues that may affect your system.
    Updates in This Release
    DST updates are cumulative, so installing this patch will provide all of the fixes in the New Updates section plus all of the
    fixes in the Previous Updates section
    New Updates
    CSCui46884
    DST/TZ data update with 2013d
    Previous Updates
    CSCue96910
    DST/TZ data update with 2013b
    CSCue06553
    DST/TZ data update with 2012j
    CSCtz20987
    DST: Update CM to Olson TZ version 2012c
    CSCtn29406
    DST: Update CM to Olson TZ version 2011h
    CSCtk55066
    DST: Update CM for Olson TZ ver 2010o
    CSCtj75860
    Inconsistent changeover
    for DST spring and fall in US, Canada
    CSCtg50448
    DST: Update CM for Olson TZ ver 2010i
    Known Caveats
    CSCuj30440
    Renaming DST
    cop file in logs
    CSCuj26553
    69xx phones will not display correct time for Chile/Santiago Timezone
    CSCue81856
    dst
    updater.2012j DST cop file does not match Gaza in timeanddate.com
    From
    http://www.cisco.com/web/software/282074298/106084/dst-862-2013d-cop-readme.pdf
    Cheers!
    Rob
    "Why do the best things always disappear " 
    - The Band

  • ICloud DST Issues With Outlook

    When I sync my Outlook Calendar into my iCloud Calendar all recurring events that existed before DST are off by 1 hour in iCloud but correct in Outlook. Any ideas?
    So for example I have a recurring event for a daily meeting. This meeting was created in August.
    The meeting takes place daily @ 9:30 AM.
    Right after the time switch over the weekend (Nov 3) the meeting is now showing up at 8:30 AM instead of 9:30 AM in my iCloud calendar but it is displayed corectly @ 9:30 AM in Outlook.
    Any ideas?

    ok...
    From experience, I can tell you the two calendars are both default calendars with iCloud. 'Work in Cloud' probably doesn't contain any of previous inputs because your iphone probably defaults to your regular calendar.
    For me, I was able to get a good understanding by looking at the icloud calendar at icloud.com and the outlook calendar side by side. I recommend doing so, and playing around with things so you can figure out how they work.
    With Outlook, you are going to have locally stored stuff (like Contacts), and your cloud-stored stuff (like Contacts in Cloud). That is why you are seeing two different sets of data. It looks like you dont have any locally stored contact, which is fine. All of your contacts are in iCloud (or...Contacts in Cloud), which should correlate to your iphone. again, it might be best to just pull up icloud.com, and put it side by side with outlook. it helped me get a good understanding of how it works.

  • DST issue

    Hi All,
    I have a DST issue with the B2B log files.
    The log information does not reflect the DST time change we had a few weeks back.
    The date/time stamp of the file log file:
    -rw-r--r-- 1 orab2b oinstall 9746648 Mar 27 10:46 b2b_4.log
    The date/time stamp WITHIN the log file:
    2008.03.27 at 09:46:35:263: B2BStarter thread: Repository - (DEBUG) CatalogDriver.setBindVariables():
    2008.03.27 at 09:46:35:263: B2BStarter thread: Repository - (DEBUG) Bind Variable : index = 2 value = Quiescing
    2008.03.27 at 09:46:35:264: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
    2008.03.27 at 09:46:35:264: B2BStarter thread: Repository - (INFORMATION) Exiting Use Case: queryConfiguration
    As can be seen the timestamps within the log file did not "spring forward".
    This is true for all the log files.
    The timestamps in the GUI are fine.
    Also, the unix date command returns the correct time.
    I am missing a patch?
    Thanks in advance.

    Can you make sure both of the server timing are changed according to DST. If yes and still have issues, please setup a telecon and give your timing and phone number.
    Rgds,Ramesh

  • Issue with displaying Unicode Characters returned by a webservice

    Hi, We are developing a mobile application which provides multi language selection (Arabic & English). but we are having an issue with displaying returned JSON which has Arabic text. The output we get is as below. Our .net client throws the following
    exception. Appreciate your kind help and thank you in advance.
    [net_WebHeaderInvalidControlChars]
    Arguments:
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.7.60408.0&File=System.Net.dll&Key=net_WebHeaderInvalidControlChars
    Parameter name: name”
    Returned JSON:
    https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar
    Connection ? Keep-Alive
    Content-Type ? application/json; charset=UTF-8
    Date ? Fri, 27 Feb 2015 03:35:43 GMT
    Keep-Alive ? timeout=1, max=100
    Last-Modified ? Thu, 26 Feb 2015 14:43:55 GMT
    Link ? <http://72.44.81.184/~shababcapital/wp-json/posts/131>; rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/119>;
    rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/118>; rel="item";
    title="اÙ?جÙ?در Ù?ؤÙ?د استÙ?رار "اÙ?شباب Ù?اÙ?رÙ?اضة" فÙ? دعÙ? Ù?سÙ?رة اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/117>; rel="item"; title="اÙ?جÙ?در
    Ù?Ø´Ù?د بدÙ?ر اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب", <http://72.44.81.184/~shababcapital/wp-json/posts/55>; rel="item"; title="اÙ?جÙ?در: Ù?دفÙ?ا
    تحÙ?Ù?Ù? أفضÙ? فرص استثÙ?ارÙ?Ø© Ù?Ù?Ø£Ù?دÙ?Ø© اÙ?Ù?Ø·Ù?Ù?Ø© Ù?Ù?بارÙ? اÙ?Ù?شرÙ?ع اÙ?جدÙ?د", <http://72.44.81.184/~shababcapital/wp-json/posts/45>; rel="item"; title="اÙ?جÙ?در Ù?Ø´Ù?د بدÙ?ر
    اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب"
    Server ? Apache
    Transfer-Encoding ? chunked
    X-Content-Type-Options ? nosniff
    X-Pingback ? http://72.44.81.184/~shababcapital/xmlrpc.php
    X-Powered-By ? PHP/5.4.24
    X-WP-Total ? 6
    X-WP-TotalPages ? 1

    I originally downloaded it using IE and viewed the content in Fiddler.  Use this code to get the content:
    string url = "https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar";
    HttpBaseProtocolFilter MyFilter = new HttpBaseProtocolFilter();
    MyFilter.IgnorableServerCertificateErrors.Add(Windows.Security.Cryptography.Certificates.ChainValidationResult.InvalidName);
    HttpClient request = new HttpClient(MyFilter);
    string response = await request.GetStringAsync(new Uri(url));
    MyContent.Text = response;
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • HT4623 iOS 8 version 8.1.2 issues with the calendar displaying wrong TIME ZONE!

    I just updated to iOS 8 using version 8.1.2 and am having issues with the calendar.  I use my GMAIL calendar and sync to my iPhone and now any calendar entries that I add from my phone display the current time zone AND GMT time.  Entries that were already there display correctly.  New entries entered from the GMAIL calendar also display correctly.  The issue is with NEW entries entered on my PHONE into the calendar.  This is very annoying and causes problems for new entries that need EDITED.  Once opened to edit it defaults to GMT time!  WRONG!!  I have turned off the automatic time zone feature and Time Zone Override in Settings but it's still WRONG!  There are multiple reports of this online so I would like to know when/if it will be corrected or if there is a fix!  Please help!!

    Quite the same problem here, GMT, UTC.......
    Why when they do an update they don't check it completely???

  • Issue with internal JMS queue

    Hi,
    We discovered following issue with Netweaver version:
    SAP EP 6.0 ON WEB AS 6.20
    J2EE version:
    Cluster-Version: 6.40   PatchLevel 106831.313
    Build-On:Thursday, October 26, 2006 18:56 GMT
    Perforce-Server:
    Project-Dir:JKernel/630_VAL_REL
    JKernel Change-List:106831
    Build machine:SAPInternal
    Build java version:1.3.1_18-b01 Sun Microsystems Inc.
    SP-Number: 19
    Source-Dir: D:\make\engine\630_VAL_REL\builds\JKernel\630_VAL_REL\archive\dbg
    During sending messages into internal JMS queue we sent messages bigger than 1MB. After that, JMS queue was not able to process any other messages even if it was smaller than 1MB. Same issue occured if there was more smaller messages sent in short time (e.g. in 2 seconds). We don't have any significant error message in any log.
    See information thath we have found in dump stack trace file (ix.log):
    "SAPEngine_Application_Thread[impl:3]_25" prio=5 tid=0x0000000101f5ebf0 nid=0x37 in Object.wait() [fffffffe0bdfd000..fffffffe0bdff8b0]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xfffffffe2ebfa1b8> (a java.lang.Object)
    at java.lang.Object.wait(Object.java:429)
    at com.sap.jms.client.memory.MemoryManager.allocate(MemoryManager.java:132)
    - locked <0xfffffffe2ebfa1b8> (a java.lang.Object)
    at com.sap.jms.client.memory.MemoryManager.allocateMemoryForBigMessage(MemoryManager.java:92)
    - locked <0xfffffffe2ebfa1b8> (a java.lang.Object)
    at com.sap.jms.client.session.Session.processFinalMessage(Session.java:1732)
    at com.sap.jms.client.session.Session.run(Session.java:675)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    which indicates to us that initializing of memory is locked.
    Please let us know:
    -if there is any log which indicates this behaviour without making thread dump
    -which limits must be fulfilled to process messages without this error
    -how to unblock this lock for processing correct messages without restarting NW - or if there is any predefined timout which kill this locked session and disable uncorrect message
    -how to manage records in bc_jmsqueue table for removing big messages from queue if there were loaded already
    -how to stop application which caused this problem. If we try to stop it through standard stop_App, application stays in Stopping mode forever.
    This problem occured in test environment and also in productive environment using the same SAP NW. Now - we do not have any work around solution..... therefore periodically we need to restart SAP NW....
    Thx for any suggestions.....

    Hi,
    We are also facing the same problem of restarting the SAP NW each time, if you have found the solution, please let me know.
    Thx in advance.
    Ramanath

  • Issues with certificates with multiple CNs

    Hi,
    I manage my own internal Windows Certificate Authority which I use to sign certificate requests for internal web servers. I have an odd issue.
    If I create a CSR from a server that has multiple CNs (e.g. 10.1.1.25, *.mydomain.local, www.mydomain.local) FF 9 and FF 10 both complain about the certificate "The connection is not trusted". It would appear FF is only using one of the CNs to validate the site in question. i.e. if I visit the site via 10.1.1.25 I get the warning. If I use www.mydomain.local I do not receive the warning.
    Further, I do not have this issue with IE9. Is there something broken with FF and sites that use multiple CNs in their SSL cert? Or perhaps am I doing something wrong when generating the CSR (not that I see how, as it's a standard template I use, and it works flawlessly with IE9 browsers)?

    # curl -v https://areaclienti187.telecomitalia.it
    * Rebuilt URL to: https://areaclienti187.telecomitalia.it/
    * Hostname was NOT found in DNS cache
    * Trying 62.77.57.164...
    * Connected to areaclienti187.telecomitalia.it (62.77.57.164) port 443 (#0)
    * successfully set certificate verify locations:
    * CAfile: /etc/ssl/certs/ca-certificates.crt
    CApath: none
    * SSLv3, TLS handshake, Client hello (1):
    * SSLv3, TLS handshake, Server hello (2):
    * SSLv3, TLS handshake, CERT (11):
    * SSLv3, TLS handshake, Server finished (14):
    * SSLv3, TLS handshake, Client key exchange (16):
    * SSLv3, TLS change cipher, Client hello (1):
    * SSLv3, TLS handshake, Finished (20):
    * SSLv3, TLS change cipher, Client hello (1):
    * SSLv3, TLS handshake, Finished (20):
    * SSL connection using TLSv1.0 / AES128-SHA
    * Server certificate:
    * subject: C=IT; ST=Italy; L=Pomezia; O=Telecomitalia; OU=ADM.AP.PM.WO; CN=areaclienti187.telecomitalia.it; emailAddress=[email protected]
    * start date: 2013-10-08 10:06:37 GMT
    * expire date: 2014-10-08 10:06:37 GMT
    * common name: areaclienti187.telecomitalia.it (matched)
    * issuer: C=IT; O=I.T. Telecom; OU=Servizi di certificazione; CN=I.T. Telecom Global CA
    * SSL certificate verify ok.
    With curl no problem at all.
    Last edited by saronno (2014-08-15 19:10:09)

  • DST Issues - Brazil

    Gentlemen,
    I am having an issue with my Blackberry Storm 2 (Blackberry 9520).
    I am running the latest OS version for this model (version 5).
    Nevertheless, my Blackberry is synchronizing (with Gmail) all of my appointments which occur in the week starting February 18th as if they were 1 hour off.
    In 2011, we had DST in Brasilia (-3 hours) that ended on February 18th. Nevertheless, in 2012 DST is scheduled to end one week later, on the 26th.
    This error is occurring even though I have the net_rim_bb_timezoneupdater module version 1.0.0.228 installed.
    Please help me with this issue if possible!
    Thank you,
    Leonardo

    j_hotch wrote:
    > Anyone else have strange DST issues on 3/11 which
    cleared up on 3/12?
    > Specifically, castFromServer not applying DST on 3/11
    but then starting to
    > apply it on 3/12?
    as i said, it's a mystery to us all ;-)
    btw the latest timezone CFC uses java epoch offsets instead
    of datetime objects.

  • DST Issues - clock jumped two hours forward

    Device: Motorola Moto X
    Android Ver: 4.4.4 (latest for my model)
    I've never had DST issues on any of my phones before, but this weekend, when DST rolled around at 2:00 a.m. on Sunday morning, my phone actually jumped two hours forward instead of just one. I restarted several times since then, to no avail. I've check my clock settings, and everything is correct. I'm in CST time zone. I've got no home times set, or any cities set. My time should be pulling directly from Verizon.
    I honestly am not sure what else I can try other than a factory reset, which I'd like to avoid. Any suggestions? I'm very tech savvy, but I'm honestly lost on this one.
    Thanks,

        Zac_91,
    I am sorry to hear of the issues you are having with the time on your phone. We want to make sure this gets corrected. Thank you for everything you have done thus far. When going to Settings>Date and time is Automatic date & time selected along with Automatic time zone? If so, please uncheck both options and then recheck and power cycle the device. Let us know if the issue persists.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Issues with importing..

    First off im not sure if this is the right place to post this and if its
    not im very sorry.
    Im having some weird issues with my install of Zen 6.5 sp2 on our
    servers.
    1. Importing...
    The workstations import but fail to create the workstation object ID.
    This happens when I try the automatic import policy. But if I delete
    the Workstation object and then import it useung a command promte with
    zwsreg it will import fine and create the workstation ID. I have no
    clue what is casuing this problem. I have checked my polices many times
    and I can not find any thing wrong with them.
    The next problem I have having is with my DLU's They no matter what
    create a new user every time I log in even thought the policy is set to
    not do that. What is weird about that is its naming the user with the
    name I want but then placeing the computer name after it like
    this...(user.computername.ooo) This is really weird and I have no idea
    what could be causeing this...any ideas?
    Bsaunders

    Marcus Breiden Wrote:
    > On Tue, 18 Jul 2006 16:59:20 GMT, Bsaunders wrote:
    >
    > > I think I found my problem but I dont know how to fix it. Im useing
    > XP
    > > SP2 and I think that the ZENWSREG.DLL is not being called at
    > startup.
    > > The workstation will import just fine with the command line useing
    > > zwsreg. Niw I looked this up on novell but I had no luck with Zen
    > 6.5
    > > SP2. ANy clues on what to do next?
    >
    > hmm.. you do have the workstation manager installed?
    >
    > how many zenpol32.dll do you have?
    > --
    >
    >
    > Marcus Breiden
    >
    > If you are asked to email me information please change -- to - in my
    > e-mail
    > address.
    > The content of this mail is my private and personal opinion.
    > http://www.edu-magic.net
    ---hmm.. you do have the workstation manager installed?---
    Yes
    ---how many zenpol32.dll do you have?---
    This is going to sound stupid but I do not know what you are talking
    about here. Unless you are talking about how many of those files are on
    the workstation?
    I think this is still the problem but I have found out what is casuing
    the problem. Right now we Run Netware 6 with SP4. But these new server
    that were built were built with SP5 and that is casuing the problem.
    The servers that have SP4 works fine but the servers with SP5 do not. I
    think that zenwsreg.dll is having a problems talking to the server. Is
    there a pacth or a tid that you may know of?
    Bsaunders

  • Mime Type issue with .docx Files in Apex 4.0

    We are having issues with windows 2007 .docx documents that are when they are viewed on windows 2007 machines with ie8. If I look in the storage table the mime type is not set correctly. It is being set as application/octet-stream. When we download the file one windows 7/IE8 either the browser thinks it is a zip file or it does not recognize it.
    If I go into the back end and update the table with the correct mime type application/vnd.openxmlformats-officedocument.wordprocessingml.document it works fine.
    We have tried to update mime types on the apache server but this does not help.
    Apex seems to be deciding what mime type to populate the table with.
    It seems like I need to update apex somehow to recognize that a .docx extension should be stored as type mime type application/vnd.openxmlformats-officedocument.wordprocessingml.document.
    Does anyone know how I would do this?
    We are running Apex 4 on 10g IAS with mod/plsql
    are application is setup very similar to what is describe in this document by David Peak
    http://www.oracle.com/technetwork/issue-archive/2009/09-jan/o19browser-087025.html
    Edited by: user7660930 on Apr 18, 2011 7:40 AM

    I thought about trying to do something similar to the code above but would prefer that apex would work properly.
    I created a page with the sql region and added this code
    owa_util.print_CGI_ENV
    when I run it it shows the following environment variables. It look like the WebDB environment HTTP_ACCEPT value needs to be updated. Does any one know how to update this information on a 10gIAS server and were it is stored? I have some documenation on WebDB but none of it seems to point to the correct location of the files and there are no admin pages
    PLSQL_GATEWAY = WebDb
    GATEWAY_IVERSION = 2
    SERVER_SOFTWARE = Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server
    GATEWAY_INTERFACE = CGI/1.1
    SERVER_PORT = 4445
    SERVER_NAME = admsunxapp04.ad.jocoks.com
    REQUEST_METHOD = GET
    QUERY_STRING = p=301:1:3167922978599440:::::
    PATH_INFO = /f
    SCRIPT_NAME = /pls/apex/sand
    REMOTE_ADDR = 172.16.14.100
    SERVER_PROTOCOL = HTTP/1.1
    REQUEST_PROTOCOL = HTTPS
    REMOTE_USER = APEX_PUBLIC_USER
    HTTP_USER_AGENT = Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; Tablet PC 2.0)
    HTTP_HOST = admsunxapp04.ad.jocoks.com:4445
    HTTP_ACCEPT = image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
    HTTP_ACCEPT_ENCODING = gzip, deflate
    HTTP_ACCEPT_LANGUAGE = en-US
    HTTP_ORACLE_ECID = 1303315270:172.16.2.9:3032:0:2526,0
    WEB_AUTHENT_PREFIX =
    DAD_NAME = apex/sand
    DOC_ACCESS_PATH = docs
    DOCUMENT_TABLE = wwv_flow_file_objects$
    PATH_ALIAS =
    REQUEST_CHARSET = AL32UTF8
    REQUEST_IANA_CHARSET = UTF-8
    SCRIPT_PREFIX = /pls
    HTTP_COOKIE = ORA_WWV_R1=%23ALL; ORA_WWV_R2=%23ALL; ORA_WWV_R3=%23ALL; ORA_WWV_ATTRIBUTE_PAGE=4651%2C%23ALL; ORA_WWV_REMEMBER_UN=ADMIN:apex_app; ORA_WWV_USER=8A32E6579024A4F4; oracle.uix=0^^GMT-5:00; DEVL=WaSkGBNfJ6-Vgpw-6HXpHvM8:S

  • Need Help : DST issue

    Hello,
    I am working on a DST issue. In my application , I have a timze zone , CDT and CST GMT -6, where DST is supposed to end on 1nd of nov Sun 2009. As the DST ends , the clocks are moved back to 1 hrs . Means when there will be 2am in the clock, the clock will be reversed back 1 hr and all clocks are adjusted to 1am. i.e. 1 hr more.
    Now in my application , I am putting an entry in the database at 1.01am of 1.12 am 1nov sun 2009. Entry goes well in the data base as user selected. Now at the time specified by customer , i.e. 1.12 am an trigger should pick the entry from db. The trigger would be caused by a poller continuously polling db after 2 mins each for any new entry, matches the current time and db time entered by user , If the diff is less than 120 sec , then only the trigger will be successful and user will be notified for the further process.For above entries Ideally the tigger should successfully be caused at 1.10am , but the trigger is executing right after 1 hr . This is causing b'coz the DST ends at 2am and clocks are reset back to 1 am .
    How can I identify the timezone of the time entered in db, from which I can get the DST offset and send the call to customer appropriately.
    Can any one please tell me how can I handle this situation. How can I make customer and my system in time sync independent of DST. ?
    Plz reply
    thanks in advance.
    Ani

    Hi,
    here a small test:
    SimpleDateFormat fmt = new SimpleDateFormat("dd MM yyyy HH:mm:ss z");
    String date1 = "01 11 2009 01:41:15 CDT";
    String date2 = "01 11 2009 01:41:15 CST";
    ParsePosition pos = new ParsePosition(0);
    Date d1 = fmt.parse(date1, pos );
    pos = new ParsePosition(0);
    Date d2 = fmt.parse(date2, pos );If I parse a string as shown above including the timezone specifier CDT or CST, then the parsed dates d1 and d2 differ by one hour. If you omit the specifier, then the parser cannot tell whether you mean CDT or CST, so just one of them is assumed. So the trick is just: Don't forget to include the timezone specifier in the parsed string, and then you will have the corerct result in the parsed dates. If you don't give that information to the SimpleDateFormatter you cannot expect, that the parser will know what to do.
    Martin
    Edited by: martin@work on Feb 19, 2009 12:46 PM

  • Issues with certificates with both Firefox and chromium

    I tried everything ... I reinstalled both of them.
    I canceled the profile and made new ones.
    I check with all my other computer if they have issues with certificates: no problem at all.
    Checked the date, is ok.
    Finally I checked what is installed on the system related to the problem ..
    # pacman -Q|egrep '(openssl|curl|ca-cert)'
    ca-certificates 20140325-1
    ca-certificates-java 20140324-3
    curl 7.37.1-1
    lib32-curl 7.37.1-1
    lib32-openssl 1.0.1.i-1
    openssl 1.0.1.i-1
    python2-pyopenssl 0.14-3
    or if there is an issued with a library ..
    # ldd `which curl`
    linux-vdso.so.1 (0x00007fffd2a48000)
    libcurl.so.4 => /usr/lib/libcurl.so.4 (0x00007f8a1c4d9000)
    libz.so.1 => /usr/lib/libz.so.1 (0x00007f8a1c2c3000)
    libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007f8a1c0a5000)
    libc.so.6 => /usr/lib/libc.so.6 (0x00007f8a1bcf7000)
    libssh2.so.1 => /usr/lib/libssh2.so.1 (0x00007f8a1bace000)
    libssl.so.1.0.0 => /usr/lib/libssl.so.1.0.0 (0x00007f8a1b860000)
    libcrypto.so.1.0.0 => /usr/lib/libcrypto.so.1.0.0 (0x00007f8a1b44e000)
    libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x00007f8a1b203000)
    libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00007f8a1af22000)
    libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x00007f8a1acf0000)
    libcom_err.so.2 => /usr/lib/libcom_err.so.2 (0x00007f8a1aaec000)
    /lib64/ld-linux-x86-64.so.2 (0x00007f8a1c747000)
    libdl.so.2 => /usr/lib/libdl.so.2 (0x00007f8a1a8e8000)
    libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x00007f8a1a6db000)
    libkeyutils.so.1 => /usr/lib/libkeyutils.so.1 (0x00007f8a1a4d7000)
    libresolv.so.2 => /usr/lib/libresolv.so.2 (0x00007f8a1a2c0000)
    I try to use a virtual machine on the same machine with ubuntu installed: no problem.
    Any idea?
    Last edited by saronno (2014-08-15 12:37:44)

    # curl -v https://areaclienti187.telecomitalia.it
    * Rebuilt URL to: https://areaclienti187.telecomitalia.it/
    * Hostname was NOT found in DNS cache
    * Trying 62.77.57.164...
    * Connected to areaclienti187.telecomitalia.it (62.77.57.164) port 443 (#0)
    * successfully set certificate verify locations:
    * CAfile: /etc/ssl/certs/ca-certificates.crt
    CApath: none
    * SSLv3, TLS handshake, Client hello (1):
    * SSLv3, TLS handshake, Server hello (2):
    * SSLv3, TLS handshake, CERT (11):
    * SSLv3, TLS handshake, Server finished (14):
    * SSLv3, TLS handshake, Client key exchange (16):
    * SSLv3, TLS change cipher, Client hello (1):
    * SSLv3, TLS handshake, Finished (20):
    * SSLv3, TLS change cipher, Client hello (1):
    * SSLv3, TLS handshake, Finished (20):
    * SSL connection using TLSv1.0 / AES128-SHA
    * Server certificate:
    * subject: C=IT; ST=Italy; L=Pomezia; O=Telecomitalia; OU=ADM.AP.PM.WO; CN=areaclienti187.telecomitalia.it; emailAddress=[email protected]
    * start date: 2013-10-08 10:06:37 GMT
    * expire date: 2014-10-08 10:06:37 GMT
    * common name: areaclienti187.telecomitalia.it (matched)
    * issuer: C=IT; O=I.T. Telecom; OU=Servizi di certificazione; CN=I.T. Telecom Global CA
    * SSL certificate verify ok.
    With curl no problem at all.
    Last edited by saronno (2014-08-15 19:10:09)

  • Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)

    Hi,
    I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
    I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
    The IIS Log on the reverse proxy showed:
    2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
    2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
    First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
    After I installed a fix for ARR
    http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.

    Hi,
    This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end. 
    Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
    We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing 
    <h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
    When the client was trying to retrieve from the webticketservice.svc
    2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
    POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
    Request Id: 0x72cfc18
    HttpHeader:Content-Length 1477
    HttpHeader:Content-Type text/html
    HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
    HttpHeader:Server Microsoft-IIS/8.0
    HttpHeader:StatusCode 502
    Installed the HotFix from here:-
    Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
    Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both. 
    I hope this helps others as I was losing the plot :-)
    Cheers
    Sam

Maybe you are looking for

  • I wish to delete current versions of firefox on desktop, and put laptop version on desktop before I update!

    I have 2 copies of 10.0.1 and a previous version of 4.0 which I updated to 10.0.2 in my app folder. All three show that I've erased all my bookmarks, bookmark bar, web page settings and everything else. I do have version 8.0.1 on my laptop with every

  • Getting the details under the name to display correctly

    Before I reformatted the Mac side of my iMac, the "Windows 7" disk icon on the desktop displayed the same way the "Macintosh HD" displays (total space, space left). But now after reformatting it, it just shows the total space as pictured below. Is th

  • Tranposrt - Purchase Requisition Release Strategy with Classification

    Gurus! Tell me if I want to Transport the Purchase Requisition release strategy with classification. The Data in each charisteristics in each PR Strategy that I have set in Dev is not getting transported to Quality. Do I have to enter the data in cha

  • Apach Server starting error

    Hello All, Soon after I installed the Oracle9i Enterprise version, when start Oracle HTTP Server, have error: Syntax error on line 92 of d:/oracle/ora92/sqlplus/admin/isqlplus.conf: failed to create FastCGI application accept mutex. And the line 92 i

  • Flash IDE multiple SWFs on IOS

    Hello, I have A Flash Application (no Flashbuilder), which parse a xml-file and loads some SWFs (the SWFs contains actionsscript 3) This Application works fine, but now I want to publish for IOS. Testing on my Iphone I get always this error message "