DSTv4 update in the 10.2.0.4 patchset

Hi,
We are planning to upgrade our 10.2.0.1 database running on Linux x-86-64 box to 10gR2.
So we need to follow
1.Upgrade to 10.2.0.4
2.Upgrade to 11gr2
Our current time zone version is 2.
Immediately after 10..2.0.4 upgrade, i want to continue upgrade to 11gr2.
In that case is it necessary to upgrade the time zone version from 2 to 4?
Thanks,
Kavitha

Follow the steps in MOS Doc 1274498.1 (Applying the DSTv15 update for the Oracle Database)
HTH
Srini

Similar Messages

Actions for the DSTv4 update in the Release 10.2.0.4 patchset

Hello.
I'm looking at the our database update process, but unfortunately, we have some temporary problems with MetaLink subscription.
Could someone share this document?

http://lmgtfy.com/?q=apply+oracle+dst+patch
and I get
http://www.oracle.com/technology/pub/notes/daylight-saving-time-update-guide.html whch might help

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac. All the music is still available on my ipad. How can i download the music on my mac?

I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac. All the music is still available on my ipad. How can i download the music on my mac?

First, are you positive it is really not there? Have you looked in your iTunes folder in your Music folder, and in the media folders there? Do you see your media files?
If your media are gone it is a lot easier to restore from a proper computer backup. Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in?

I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in without closing and reopening?

No. Frequently the apps take up more storage space on the iPod that the file download size.

The ipod cannot be updated. The disk could not be read from.

The ipod cannot be updated. The disk could not be read from or written to.
This message appears every time I try and update my ipod or put photos on. I also get this message:
An error occured while updating the default player for audio file types. You do not have enough access privileges for this operation.
WHAT DO I DO???????

Perhaps check for corrupted files--I had this issue with a messed up track/ file, and that kept killing the sync. More here:
Lost in Asia, "Disk Could Not Be Read From or Written To." #12, 03:32am Oct 15, 2005 CDT
As for the access privileges part, well, sorry, I have absolutely no idea what that means.
Good luck!

Excise Part 1 updation at the time of issue.

Hi,
I am having one requirement regarding RG23 A part 1 updation at the time of issue.
1) How the register part 1 updated at the time of goods issue.
2) I purchased one material from two different vendor. One is excise unit & other is non excise.
At the time of goods issue to shop floor how the system determine that this issue is from excisable material or non excisable material.And accrdingly how will update part 1 entries.
Every time i will go to J1I5 transaction for updation of RG23 A or it will update automatically.
Regards,
Dinesh

Hi Sathish ,
In CIN - basic settings - Maintain excise groups there in that outgoing excise invoice Excise invoice during the billing and Create and post inv in single make the both fields un mark.
Hope this will make you to create invoice and excise invoice separately, or els find if any exit is used earlier.
Check and revert
Regards
Ram

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How do i uninstall a purchased app (that no longer appears in the purchased app list in the store) so that i can repurchase and have the app appear as "purchased" so that i can get updates as the software is updated periodically?

I am looking for some help with the app store. I recently purchased an app (aperture) in the app store and subsequently apple refunded the purchase price. However, the downside of this is that aperture no longer appears as a "purchased" app within my app store account. Accordingly, i don't believe i will get updates as the software is updated periodically. Apple has instructed me to delete all my aperture files, reboot and then revisit the app store to re-download and it should let me pay for the app and redownload just as if i had never had the app before. However, when i go to purchase aperture, i get a warning that it has already been purchased and that i can re-download for free. That sounds great but again it won't appear in the "purchased" list in the app store b/c of the original refund from apple. I never thought i would have this much trouble trying to pay someone for a product!
Questions:
Is the app store looking to my hard drive for traces of aperture to determine whether it has been purchased or is it looking at some kind of purchase history within the app store?
Is there anyway to wipe my hard drive clean of aperture files or wipe clean my app store purchase history so that i can start over?
If none of this is possible, does anyone have a possible solution?
If i were to redownload aperture (currently for free since it won't let me pay) when a subsequent update comes out (say it goes from version 3.2.2 to 3.2.3) can i then elect to buy aperture, pay the fee and will it appear as a purchased app and allow me to get upgrades going forward? Would any data be compromised with this?
Many thanks for your help!

Questions:
Is the app store looking to my hard drive for traces of aperture to determine whether it has been purchased or is it looking at some kind of purchase history within the app store?
Is there anyway to wipe my hard drive clean of aperture files or wipe clean my app store purchase history so that i can start over?
If none of this is possible, does anyone have a possible solution?
If i were to redownload aperture (currently for free since it won't let me pay) when a subsequent update comes out (say it goes from version 3.2.2 to 3.2.3) can i then elect to buy aperture, pay the fee and will it appear as a purchased app and allow me to get upgrades going forward? Would any data be compromised with this?
1. Do you have a backup connected to your Mac that contains the app? If so, yes the MAS can detect that and believes that the app is installed.
2. If the app no longer appears in the purchase history on the Purchased pane in the MAS, then it would seem that Apple has taken care of that.
4. Updates, such as you describe are free. Upgrades are not. An upgrade is a new paid version of the app, such as v 3.0 to v 4.0.

Error in Adobe Illustrator update to the new version 16.0.3 (compatible with retina display)

Hellow, so i have Adobe Illsutrator cs6 version 16.0.0. I was so excited to update this version to a retina display compatible one (16.0.3).
I downloaded he extension 24.2 Mb from the official adobe website, and when i tried to install the update, by the adobepatchinstaller file, the adobe application manager poped up and gave me this message....
i read several posts from people facing the same problem, so please if anyone knows how to fix this just tell us...we are so eager and excited to update to the retina adobe

fwiw I just did a fresh install of my OS (Windows 7 x64) and Apps including the CS6 Master Suite and have exactly the same issue and U44M1P7 error message . This is with the Illustrator16.0.3_x64 update which is the most recent for the PC version.
I downloaded the manual installer and it did not help. Illustrator reports that it is running v16.0.3 while the Application Manager still claims it still needs the update.
The Application Manager shortcut links to the app manager app which is PDapp.exe and checking its details shows that it's v7.7.7.233.
My next step will be to uninstall and then reinstall the Illustrator CS6 component of the CS6 Master Suite and reinstall.
Russell

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe

I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AM

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

Since I updated to the new Firefox, fonts are defaulting incorrectly on some websites. Instead of pulling a web font or something like Arial, it's pulling specialty fonts from my fontbook. Is this a Firefox or Mac problem?

Here is a screenshot of what I'm talking about [http://cl.ly/1P0O0U1s0K0W0r142N22 http://cl.ly/1P0O0U1s0K0W0r142N22]
This is not happening in other browsers on my computer, and just started when I updated to the latest version of Firefox.

You can do a check for corrupted fonts and other font issues:
* http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html - CreativeTechs Tips: Garbled Fonts Troubleshooting Guide
* http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts

DSTv4 update in the 10.2.0.4 patchset

Similar Messages

Maybe you are looking for