DSU execution error

Hi ,
I have done cloning from production.
With out any installation and with out any down time to another box.
Now that system is almost equal to the production system.
i have all database in the new box .
After that i have done Oracle upgrade from 9i to 10g .
System is running fine.
Now i started upgrade in that new box.
I have given user and password the very next screen is initialization step.
where i am getting the below error
DCS execution eror:-
Error while creating request list - see preceding message .
Unable to detect an abap and /or java instance of SAP system PCP installed on the host pcbl_tes
Note:- Our production is in cluster CI & DI .
So all startup profile are copied in the new box.
Now if i have to start or stop SAP
i have to give the virtual hostname(sapr3)
so the command is startsap sapr3 & to stopsap sapr3.
can any one suggest for this?
Reagrds,
Amar

Hi,
If you already did check profiles so parameters like SAPLOCALHOST is pointing to virtual name then you could use the command: ../EHPI/abap/bin/SAPehpi set stdpar
This will begin asking for hostnames and other parameters so you can use the virtual name instead of the local hostname, then the system won´t show that error.
Please be aware that if you have profiles pointing to virtual hostname and local hostname in the profile directory, you will face problems during ABAP and/or Java phases so the best you can do is to have ONLY the profiles for the virtual hostname and move the ones that points to local hostname.

Similar Messages

Error while creating request list DSU execution error in Upgrade PI

Hello,
I´m doing upgrade de PI 3.0 - 7.0 in mscs and run startup.bat...
DSU execution error on hostnode1.domain.sap
Error while creating request list - see proceeding messages
Instance profile for instance 00 on host hostnode1 not found profile SID_w*00_hostnode1 not found in directory ...../usr(sap/SID/profile
Help please.
Luis
Edited by: Luis Maura on Nov 5, 2010 1:38 PM

Instance profile for instance 00 on host hostnode1 not found profile SID_\w*00_hostnode1 not found in directory
hostnode1 is physical or virtual ?, this file SID_\w00_hostnode1* exist or not .
compare the GLOBAL HOSTNAME settings in profiles of Default,Instance and start
Regards,

DSU Execution Error: More then one instance found for name: DVEBMGS00

Hello,
try to start an Upgrade from SAP4.7x110 to ECC6.0 EHP4 SR1 by running the statup.but. I recieve immediatly the error. DSU Execution Error: More then one instance found for name: DVEBMGS00.
The System is a fresh homo.sys-copy (comming from DVEBMGS00). On the harware was running in former times an instance DVEBMGS00 but the SID was a different. I allready looked if there is still something on the host from this last installation but nothing found.
Any suggestions
Peter

Hi,
Please see the link below..Hope this will help you..
Upgrade stuck in Pre- Processing
DSU Execution Error
/thread/1948457 [original link is broken]
Regards

Execution error in Marketing planning

Hi all
I am getting following error "CL_CRM_MKTPL_APPLICATION====CP" while creating a new market plan. It an is execution error.
PLz help me out
Regards
Quantuscumque
Edited by: quantuscumque on Aug 16, 2010 9:58 AM

Hi Quants ,
Please be informed that as of release 5.1,SAP GUI is suppose to use
only for administrative tasks and for transactions,new WEB UI.
Please check the attached note 1118231 for more information.
Thanks & regards,
Krishnen

SQL execution error, ORA-01843: not a valid month

Im using ASP/VBScript and its my first time starting to use Oracle as a DB provider.
Just having an issue with a statement that I have.
Heres my statement:
SELECT T592_NOON.SHIP_CODE, T592_NOON.REPORT_DATE, T592_NOON.L_B, T592_NOON.AVERAGE_SPEED, T592_NOON.SEASTATE, T592_NOON.DISTANCE, T592_NOON.WIND_DIRECTION, T592_NOON.IFO_MAIN, T592_NOON.IFO_BOILER, T592_NOON.IFO_AUXENGINE FROM T592_NOON WHERE (((SHIP_CODE)='S271') AND (REPORT_DATE BETWEEN to_date('08/02/2004 13:00:00', 'DD-MON-YYYY HH24:MI') and to_date('28/02/2004 18:15:00', 'DD-MON-YYYY HH24:MI')))
Whenever I run it it errors and returns:
SQL execution error, ORA-01843: not a valid month
Can anyone tell why this wouldnt work?
REPORT_DATE type is DATE
REPORT_DATE Sample data: 2003-04-28-12.00.00.000000

Changing the format of the date seemed to fix it.
Incorrect: '08/02/2004 13:00:00'
Correct: '08-FEB-2004 13:00'

How do I prevent windows from shutting down ITUNES with a Data Protection Execution error when trying to sync with my Iphone 4S in a 32 bit windows environment?

I first was not able to install ITunes 10.5. Apple upgrade installer caused a data protection execution error and windows reverted the process back to the original software. I then removed ITunes through the control panel ap. I removed Bonjour and quicktime. I could not use the windows uninstaller to remove the apple upgrade installer and had to find a fix it program on the microsoft web site to fully remove this program. After doing this, I was able to load and install itunes 10.5. However, now when I try to sync my new 4S phone, the sync only goes to the 2nd or 3rd step before eliciting a DPE error and causing itunes to shut down. I tried making a new user profile. Opened I tunes in the new profile and began to search for music on my computer. The program again elicited a DPE error. I looked to see if quicken was still on the computer and maybe causing a hangup, but it is no longer installed. Ok, I am at wits end and have spent much too much time on this issue. Please help.

I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923 RESTART UR COMPUTER..
c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.
d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
IPhone4, Gateway Windows Vista 32bit

Process execution engine execution error. from the latest HF in BPM Ent.

Hi All,
After applying the latest hotfix, I'm now getting this error when trying to launch any of the application.
My setup is AquaLogic BPM Enterprise 6.0.4 for Weblogic.
I've tried redeploying all the deployments within Weblogic and also the Admin Center. Nothing has worked.
Any idea what's causing this?
Process execution engine execution error.
Caused by: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
fuego.papi.impl.EngineExecutionException: Process execution engine execution error.
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:158)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
at $Proxy154.runGlobalActivity(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: java.lang.NoSuchMethodError: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
at BT_QW.MyProcess.Default_1_0.Instance.writeObject(Instance.xcdl)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
at fuego.server.ProcInst.getComponentData(ProcInst.java:780)
at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2793)
at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.createInstance(JdbcProcessInstancePersMgr.java:1018)
at fuego.server.persistence.Persistence.createProcessInstance(Persistence.java:669)
at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1810)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2708)
at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:1036)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.runGlobalActivity(EJBProcessControl_1zamnl_EOImpl.java:3450)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_1000_WLStub.runGlobalActivity(Unknown Source)
at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runGlobalActivity(EJBProcessControlInterfaceWrapper.java:2033)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
... 39 more

I ended up rebuilding my ALBPMDir and ALBPMEngine schemas and WebLogic server domains from scratch. When executing the process that was giving me a headache, all of a sudden I got the following error:
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 16538, whereas the maximum size is 16384. This occurs with instance '
Anyway, the sizes were not terribly far off, but I doubled the process instance size from 16k to 32k and the error went away.
Something to try on your end, perhaps.
Chris

Database command execution error. (While mounting a repository)

Hello,
I am trying to mount 'Customer Master' repository in Console
But it is giving me the following error.
'Database command execution error. A SQL statement failed to execute. The actual error may have been written to a log file.'
Can any1 throw some light as to how do i solve this problem.
And where to check this log file?
Also i am able to mount any other repository without this error.
Regards,
Roshani

Hi Roshni,
It could be that the repository tables were not correctly created in the Oracle Database.
Try restarting the oracle services ,also check the Oracle listener configurations are correct.
If you have an archieve of this repository then try mounting the archieve with a different name.
Also try restarting the MDM server.
Hope It Helped
Thanks & Regards
Simona Pinto

Adapter execution error OIM

Hi All,
I have created a new field in user form named telephone number,When ever I run AD target recon, the updated telephone number in AD is reflecting in Process form. I wrote a copy Adapter that copies process form value to usr form.
This is working well with the firstname field, but wen I change it to telephone number field, the updated phone number present in AD is reflecting in process form telephone field, but not copying to usr form. I get the following error message:-
Adapter Execution error: UpdateDataObjFieldValue Error updating null
Java.Lang.nullpointer exception.
can anyone helpme

You can do the following:
Create a new:
Resource Object: AD User Trusted
IT Resource: ADITResource Trusted
Process Definition: AD User Trusted, type provisioning
Scheduled Task: AD User Trusted Reconciliation
Reconciliation Rule: AD User Trusted
On your resource object, select the trusted source checkbox. Add the recon fields that you are grabbing from Active Directory that you want to update the OIM User profile with. Use the same names and format as your normal AD User object. Set your matching rules.
On your process definition, don't add any new tasks. Simply map the values from reconciliation to the process form.
Create your reconciliation rule mapping the incoming user id to the oim user id.
Duplicate the existing IT Resource and Scheduled task with the exact same information but use the AD User Trusted as your resource object when needed, and the same for the IT Resource.
Now you have an exact copy of the AD User workflow for reconciliation purposes to update the OIM User Profile as well. Since you have 2 IT resources, you will have a timestamp for both targets so they will each catch updated users.
-Kevin

Fatal execution error

When I start-up my computer I receive a Fatal execution error 0x7927f26e notice. I can continue but would like to prevent the notice from happening. What's going on?

I have tried following suing start /wait
start /wait xcopy "IBM LUM Directory" "C:\ProgramData\" /E /C /R /H /K /Y
1\win64\startb.exe -u "c:\program files\Dassault Systemes\R18" -newdir -ident R18 -D "C:\ProgramData\DassaultSystemes\CATEnv"
-l "DIC.slt" -v -noreboot
same results, deployment failed with exit code 55 and slight different error
IMaintenanceCodeinator::GetState failed with error code 0x87d00317
Monitoring status is In Progress..
RJ09

Server execution error when trying to open a .wmv video

Unable to open a video with wmv it gives me an error message server execution error.

You can install the new WMP plugin (np-mswmp.dll)
* https://support.mozilla.org/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

During file extraction, "Error during execution, error code =4"

from Oracle® Fusion Middleware Getting Started With Installation for Oracle WebLogic Server
11g Release 1 (10.3.1)
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13751/toc.htm#CIHCJJIA
> said "instead of installing the JRockit JDK that is included, Oracle strongly recommends that you download and install the latest available JRockit version separately."
selected "Oracle JRockit Mission Control 4.0, for Java version 6"
> got file named: http://download.oracle.com/otn/bea/jrockit/jrmc-4.0.0-1.6.0-linux-ia32.bin
Set permissions to *.bin installer:
chmod a+x file_name.bin ./file_name.bin
During file extraction (as 'oracle' user/owner) got: "Error during execution, error code =4"
Please advise.
thank you.

hi,
i ran into teh same problem and just figured out that my CPU is too old (AMD Athlon 3000+). This processor doesnt support SSE2, as required, see
http://download.oracle.com/docs/cd/E15289_01/doc.40/e15066/suppconfigchanges.htm#CHDDFHJF
does your machine have all the relevant features?

Procedure execution error

Hi ,
The below procedure giving execution error When pass pv_lsrc,ctry and tbl_name input parameters ,the procedure will delete records from recpective table
Ex:If pv_lsrc=BIT
ctry=IND
tbl_name =XX1
It will delete records from xx1 ,If pass yy1 as table ,it will delete records from yy1.
create or replace procedure p1( pv_lsrc in varchar2,ctry in varchar2,tbl_name in varchar2)
v_tbl_name varchar2(20)"=' '
v_cnt number(7):=0;
v_tot number(7):=0;
cursor c1 is select rowid from xx1 where src=pv_lsrc;
cursor c2 is select rowid from yy1 where src=pv_lsrc;
begin
if(v_tbl_name=tbl_name) then
for rec in c1 loop
delete from xx1 where rowid=rec.rowid;
v_tot:=v_tot+1;
v_cnt:=v_cnt+1;
if mod(v_cnt,5000)=0 then --commit for every 5000 records
commit;
dbms_output.put_line('Total records deleted from xx1:'||v_tot||' and commted');
elsif
delete from yy1 where rowid=rec.rowid;
v_tot:=v_tot+1;
v_cnt:=v_cnt+1;
if mod(v_cnt,5000)=0 then --commit for every 5000 records
end loop;
commit;
dbms_output.put_line('Total records deleted from yy1:'||v_tot||' and commted');
end if;
end;
Thanksinadvance
MR

I was getting the below error when executing the below procedure
LINE/COL ERROR
18/1 PLS-00103: Encountered the symbol "DELETE" when expecting one of
the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
19/1 PLS-00103: Encountered the symbol "V_TOT"
19/15 PLS-00103: Encountered the symbol ";" when expecting one of the
LINE/COL ERROR
following:
) , * & = - + < / > at in is mod not rem <an exponent (**)>
<> or != or ~= >= <= <> and or like between ||
22/1 PLS-00103: Encountered the symbol "END" when expecting one of the
following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge
LINE/COL ERROR
<a single-quoted SQL string> pipe
create or replace procedure p1( pv_lsrc in varchar2,ctry
in varchar2,tbl_name in varchar2) IS
v_tbl_name varchar2(20):=' ';
v_cnt number(7):=0;
v_tot number(7):=0;
cursor c1 is select rowid from xx1 where src=pv_lsrc;
cursor c2 is select rowid from yy1 where src=pv_lsrc;
begin
if(v_tbl_name=tbl_name) then
for rec in c1 loop
delete xx1 where rowid=rec.rowid;
v_tot:=v_tot+1;
v_cnt:=v_cnt+1;
if mod(v_cnt,5000)=0 then --commit for every 5000 records
commit;
dbms_output.put_line('Total records deleted from xx1:'||v_tot||' and commted');
elsif
delete yy1 where rowid=rec.rowid;
v_tot:=v_tot+1;
v_cnt:=v_cnt+1;
if mod(v_cnt,5000)=0 then --commit for every 5000 records
end loop;
commit;
dbms_output.put_line('Total records deleted from yy1:'||v_tot||' and commted');
end if;
end;

Unhandled execution error with ODT

Dear All,
the following is the scenario
I have a ASP.NET 3.5 application on windows server 2003 with ODTwithODAC1020221 & ODTwithODAC1110720 clients installed.
The application was working fine until today it started giving me an unusual error *'unhandled execution error'* without any more details.
I tried uninstalling and reinstalling the oracle client drivers, but not change.
pls help.
thanks in advance
Regards,

Dear All,
the following is the scenario
I have a ASP.NET 3.5 application on windows server 2003 with ODTwithODAC1020221 & ODTwithODAC1110720 clients installed.
The application was working fine until today it started giving me an unusual error *'unhandled execution error'* without any more details.
I tried uninstalling and reinstalling the oracle client drivers, but not change.
pls help.
thanks in advance
Regards,

7009: Test Execution Error with tutorial examples

Hi,
I tried to run the tutorial files found on EclipseCon 2014 site (the "classic" dvd app test).
Following first steps, after running AUT when I run test cases I always get this error:
7009: Test Execution Error.
Referenced Testcase could not be found.
What does it mean? Is it a configuration problem?
I am on windows 7 64bit and Jubula 8.1 (the latest version).
The same happens when I try to run other pre-installed example projects.
Thanks for reply
Regards
Matteo

Hi,
okay, from a first quick look at your Test Case I can tell that the unbound modules concrete 8.0 library is missing in your database used by Jubula. This library is reused in the JubulaTutorial Project but since is does not exist in the database the JubulaTutorial Project is displayed "broken". But don´t worry, this is very easy to fix
1. Open the Properties for the JubulaTutorial Project
2. Select node "Used Projects"
3. On the left hand side you can see which libraries exist in you DB, on the right hand side you can which projects are reused in the currently opened Project
4. Select the unbound modules concrete 8.1 from the left side and select the unbound modules concrete 8.0 from the right side
5. Then click the single arrow which points to the right side
6. Confirm
7. Fixed

DSU execution error

Similar Messages

Maybe you are looking for