DSWP : activate monitoring for other servers

We have added some non-SAP servers and applications in our monitoring
solution.
When I setup the system monitoring (DSWP Tcode) and I try to add CCMS
alert for "other servers", these alerts are not display in the
monitoring. It works well for "other software components", but we need
to make a distinction between servers.

before ur system is attached to load balancing, your both physical web servers should have a default peoplesoft login url, see you can access the web servers separately with that urls.
Thanks

Similar Messages

How to activate Monitoring for Others Software Component ?

Hi,
I have 1 non-sap server with MSSQL database, i want to monitoring this server as well in my SAP Solution Manager : Solution Monitoring.
I have created new server, database, system, product, logical system and assign it to the solution.
but when i am trying to set "Activate Monitoring for Ohters Software component" no CCMS_Context selected from the drop down menu ?
Please advise ?
Thank you and Best Regards
Fernand

Hi Sunil,
Thanks for your reply. I check the Note:408527 but what worries me is this section in the note
Note 3:
If the MONITORING attribute is used, BR986W warnings referring to fragmented indexes are no longer displayed. As a result, this means of
determining fragmented indexes is no longer available
so what about if that index get fragmented. ?

Activate Monitoring for System

Hi,
when I try to Setup System Monitoring, in the step Activate Monitoring for System can see only the production system, while in the smsy I setup all my development systems too.
How can I do to setup a development system in the Monitoring Setup ?
Thank's in advanced
Francesc

Hello Francesc,
Go to DSWP-> your solution-> solution landscape maintenance.
right click on the development system and click on the option "put in solution". this will activate your development system also for system monitoring.
please revert back if solved.
Regards
Tripti

Can't create web service for other servers

I am trying to create EJB web service for JBoss 4.0 but getting error in "build-impl.xml " file on the following line
"<taskdef name="wscompile" classname="com.sun.xml.rpc.tools.ant.Wscompile">"
Is there any way to create an web service for another servers.
OR
Is there any way to configure "wscompile" tool to generate the web service for other servers
It would be of greate help if any-body responds
thanks in advance
parag

Hi,
The following article
http://developers.sun.com/prodtech/javatools/jsenterprise/reference/docs/jse7/jse7_jboss_plugin.html
describes how to configure the JSE IDE to develop and deploy a J2EE application on a JBoss Application Server by using the JBoss plug-in.
Hope this helps.
Radhika

Disable SQL Monitoring for few servers

Hi Team,
I need to disable complete SQL Monitoring from all SQL servers except for a couple of servers.
For this I disabled the discovery "SQL Server Installation Seed" that is targeted on "Windows Server" class. Even after applying this override, I see that my objects are discovered in SQL server classes and I still get SQL server alerts
for all the SQL servers.
I am running SCOM 2012 SP1, so do I need to run "Remove-SCOMDisabledClassInstance"?
Also am I disabling the discovery for the correct class "Installation Seed"?
Thanks,
S K Agrawal

Hi Faizan,
Suppose you want to disable monitoring for a particular set of SQL servers. Here are the steps to be followed -
1) Create a group of these SQL servers.
2) Considering these are SQL server 2008, go to Authoring--> Object Discoveries.
3) Then disable the discovery for "Installation seed" class because that is targeted on "windows Server" class and is the base class for all other SQL Classes. You can do this by creating an override and disabling the discovery for the group created in Step
1.
4) Open a Operations Manager PowerShell window and run "Remove-SCOMDisabledClassInstance". You might get some error about RuleID and ObjectID. Don't worry about that and keep running "Remove-SCOMDisabledClassInstance" a few more times, finally you will get
a message of command completed successfully.
5) Then to confirm that discovery has been disabled, wait for few minutes and then go to Monitoring--> Discovered Inventory and change the target type to any of the SQL server 2008 class. You will not find the SQL servers from the group in the discovered
inventory.
To Re-enable the SQL monitoring, just remove the override MP or go to "installation seed" class for SQL server 2008. Open Override Summary, Click on Edit, and Remove the override where you have disabled the discovery.
I hope this helps.
Please mark this as Answer if this helped you.

Activate Substitute for other user

Hi all,
I'm using Standard Substitutions in SBWP / UWL (SAP Portal) but now I found a specific requirement and I don't know how to implement it:
Imagine that one user is going on vacations for a long time and he forgets to activate a substitute for him. Is there any way to activate a substitute for him without accessing his account and activate the substitution?
Thanks in advance.
Regards,
Andre Sousa

Hello Andre
Try to have a look at transactioncode RMPS_SET_SUBSTITUTE. This can be used to maintain substitutes centrally.
If the user has maintained the substitute, but has forgotten to activate it, then there is another option. The Substitute can from the menu in SBWP, go to Settings->Workflow Settings->Adopt Substitute. By doing so, he gains access to the inbox.
Regards
Morten NIelsen

Cisco ACE 4710 - Health Monitoring for Real Servers

Hi,
I have setup the following health probe to check for the existence of a specific web page. My intention is that when the web page is removed, the health check fails and the rserver status changes to 'out of service'. Unfortunately, when I remove the web page, I see the health check fail, and the rserver state change to 'PROBE-FAILED', however the rserver does not go 'out of service' and continues to respond to requests.
Can anyone see where I'am going wrong?
Health check probe config
probe http live_http_int
interval 15
passdetect interval 60
request method get url /loadbalancer/internal.html
expect status 199 201
open 10
RSERVER config
rserver host Server1
description Server1
ip address 10.10.10.1
conn-limit max 4000000 min 4000000
probe live_http_int
inservice
rserver host Server2
ip address 10.10.10.2
conn-limit max 4000000 min 4000000
probe live_http_int
inservice

Hi syannetwork,
I think you have to "force" the failed server to close the connection when it has failed. Otherwise it will still serve the available HTML pages.
Have a look at the "Configuring the ACE Action when a Server Fails" in the "Cisco Application Control Engine Module Server Load-Balancing Configuration Guide" and let me know if the following command helped:
conf t
serverfarm host ServerFarm
failaction purge
Have a good WE.
Cheers
LPL

Does update connection proxy store patches for other servers

I have following set-up ( all running sol 10 )
Server A : E250 , has connection to internet. runs update connection proxy and update manager.
update manager uses update connection proxy on the same server to get sun patches. This server is registered on SUN web site.
Server B: V440 NO connection to internet , runs update manager which connects to update connection proxy on SERVER A.
Suppose a patch becomes available for a Sun Driver that I have installed on SERVER B but NOT on SERVER A .
Will the update connection proxy running in SERVER A download the patch for that driver and pass it to SERVER B update manager to be applied ? Altough SERVER A does not need that patch ?
I would expect the answer to this to be YES , otherwise I do not see any value of running update connection proxy !!
Is anyone able to answer this ??
Thanks

Yes - The primary purpose of the Sun Update Connection Proxy is to provide patches to machines (like Server B) which cannot directly reach the internet.
In a nutshell, you should see no difference in the behaviour of Update Manager on Server B when pointing it directly at Sun, and pointing it at a Sun Update Connection Proxy that in turn points to Sun.
What will happen is:
Server B: will run analysis against the full patch set, and decide which patches are applicable to Server B. It will recommend any patch that meets the appropriate criteria for Server B. If a patch is recommended, you can select it for installation, and Server B will then request the patch from Server A, if Server A doesn't happen to have this patch already, it will in turn "proxy" this download from Sun, cache the patch and return it to Server B.
Hope this helps,
-ethan

Help to create a monitor for specific non-windows ID generated by script

Hello all,
Do you know how to create a monitor for specific event ID (4,5,6,7 & 8) in SCOM (with alerts) I know how to create a monitor but not how to create it for specific servers. I would like to copy those monitors in the Management Pack that I override (because
the original was locked).
Thanks for your help.

Hi,
you can create new DISABLED monitor in new management pack.
After that you will enable this monitor for specific servers using overrides.

Can I use my Pavilion HP7 as a second monitor for my workstation?

I have a HP Pavilion DV7 with Windows 7 ultimate installed. I want ot use the screen as a second monitor for my desktop workstation, which is where my fligh simulator is installed. (The desktop is a Lenovo and the graphic card allows for 2 HDMI screens)
Can I connect my HP laptop to the desktop machine in such a way as the laptop does nothing except provide a screen for the Lenovo? (If you've ever got serious about flight simulator you'll know how much you need two or even three screens!! )

Hi,
No you can't you can use other monitor as second monitor for your laptop BUT you can't use laptop monitor as second monitor for other machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Basic Network Monitoring for Cisco Operation Manager 2012

Hello,
Please bear with me as i'm new the Operations Manager 2012 world. I've just installed operations manager 2012 in our environment and i've setup a network management point. I've discovered my networking gear which is primarily cisco equipment. The devices
are appearing as CERTIFIED. It appears that they are HEALTHY however in most cases i'm getting some arbitrary monitors. I have a 6509 switch where memory and processor appear to be being monitored out of the box. I'm receiving alerts and everything.
My question is how do I turn on monitoring for other discovered components. I seem to understand I can make SNMP monitors under the authoring pane if i know the OID. That sounds like it'd be tedious work for such a simple and basic monitor. However I was
under the impression I would be able to monitor a lot of these components with a simple click of a button. Is this not the case? I'm primarily interested in monitoring the state and performance of particular interfaces as well as the state of the power supplies
in our switches. Is there a guide that explains the basic principles of this. What are my options?
Thanks!
-Brandon

Hi,
You will need to edit the discovery and broaden the range. You may use recursive discovery.
Recursive discovery will try to discover any other network devices it knows about through its Address Routing Protocol (ARP) table, its IP address table, or the topology Management Information Block (MIB) to grow the network map and present all applicable
devices to you for monitoring.
You can also filter out devices that you don't want to be discovered by using properties such as the device type, name, and object identifier (OID). This is a handy option if you wanted to quickly discover all the network devices in your network except,
a small number or some with a specific criteria.
In really large networks with a lot of network devices, keep in mind that there is a default limit of 1500 network devices that can be discovered recursively. You can of course tweak this limit to suit your environment if you wish, but for most people, this
won't be needed.
More details, please go through the article below:
http://kevingreeneitblog.blogspot.com/2012/07/scom-2012-network-monitoring-explicit.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Distribution Monitor for 2 different servers from 2 different sites

Hello all,
We are trying to use Distribution Monitor during a parallel Unicode Conversion on a SAP 4.7 system.
The source system and target system are 2 different servers located on 2 different sites (more than 500Kms distant).
Questions:
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package?
2. If it is not possible, what are the constraints in fact?
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system?
Thanks for your help & feedback,
Chris

Hi Chris,
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package? The Answer is No
In order to use Distribution monitor, u need minimum two application servers on source systems and correspondingly atleast minimum two application servers on target system
For example let us say Application server A and Application server B on sources systems and Application Server C and Application server D on target ytem
Then configure Distribution monitor properties to include two application servers as source systems and two application servers as target systems. When u exeute distribution monitor preparation, first it scan database servers in source system nd target system and then scan CI servers in source and target system. Then Packages will be distributed in two application servers A and B
Run Export from Application server A for first fifty packages , at the same time Run import these first fifty packages in Application Server C
Run Export from Application Server B for other remining packages and at the same time , run import the remaining packages into Application Server D.
(that is one to one correspondence)
2. If it is not possible, what are the constraints in fact? - There is no constraints. However there is lots of time consuming during Distribution monitor preparation and checking.
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system? - The Answer is No.
You cannot mix distribution monitor tool for source system and Migration tool used on target system.
You have to use any one tool depending on the size of database used.
if your database size used is very very large then recommend to use distribution monitor where u in sou can have multiple R3load jobs in each application server. Say Application server A use 20 R3load jobs and Application server B use 15 r3load jobs).
Thanks
APR

Time sync monitor for all windows member servers

How to monitor time sync issue on all the member servers and domain controllers. Can we monitor through scom 2007 r2. Specially we need an alert when all the member servers are not in time sync.
B John

There is no monitor for exactly your ask.
The AD management pack includes a Time Service Health monitor for DCs that makes sure the time service is running:
http://social.technet.microsoft.com/Forums/en-US/0c921fa7-45ed-4bee-8f53-c92c750f6cbf/scom-module-for-monitoring-time-sync-issues?forum=operationsmanagergeneral
Here is my "domain time tip:"
Select your preferred time server from this list
http://tycho.usno.navy.mil/NTP/. For example 'tick.usno.navy.mil'.
Then run these commands on your PDC emulator of the domain:
W32tm /config /syncfromflags:manual /manualpeerlist:"<DNS-name-of-time-server>"
W32tm /config /reliable:yes
W32tm /config /update
W32tm /resync
Net stop w32time
Net start w32time
If you execute these commands, AD defaults will cause all your member servers to discover the domain time standard and update to it.
Good luck,
John Joyner MVP-SC-CDM

Activate Deadline Monitoring for Standard Workflow

Hi Experts,
I want to Activate Deadline Monitoring for Standard SRM Confirmation Approval Workflow. Is there any way I do this without disturbing the standard workflow? Using Alerts?
Also pls advice if I can activate the deadline monitoring directly in the standard template without having it copied to a Z/Y wf template?
Thank you!
Vj

Friends,
I want to set a deadline monitoring for a case when the approver doesnt execute the workitem even after 2days. (so I believe I need to use "Requested Start")?
Further I understand how this is done, my question is can we do change it to the standard template or do I need to copy it and then make the changes.
Also Kindly share some information on using SRM ALERTS for the same functionality to send reminders/alets to approvers on delay of approving task.
Thank you so much.
Vj

Monitoring Oracle Virtual Machine for Solaris servers and LDOMs

Hi all,
could anyone tell me if we can monitor Oracle Virtual Machine for Solaris servers and LDOMs with only Oracle Enterprise Manager Cloud Control 12c, or shall we need to install Ops Center ?
Thank you in advance.

I had the same issue. Upgrading Virtual box from 4.1.16 to 4.1.20 solved the problem.

DSWP : activate monitoring for other servers

Similar Messages

Maybe you are looking for