DSWP - system monitoring/Administration - tasks not showing up

Hi all,
In our production system definition , in DSWP --> System Monitoring/Administration for our Production systems, for one prod system, the "Display Open Tasks" - the icon is not showing up. It has disappered???? We have daily tasks defined.
Any ideas????
Thanks, Neeta

HI,
The production satelleite system underwent a unicode & platform conversion and yesterday solution manager diagnostics for the production satellite system was set up - using solman_setup. Any of these changes could have caused this issue, but how?
As far as SMSY data, ADS is flagged as "relevant" in our D and Q system and the "open display tasks" icon is there and active.
WE looked at note 1478251 and we are at SAPKITL435.
I am not the task creator but am helping someone who is....
Anything else we can check?
Thanks, Neeta

Similar Messages

System monitoring, open tasks are no longer visible in Tcode DSWP

Hello!
I have patched my Solution Manager with the newest support packages and have the problem with system monitoring, open tasks. All the systems have a long_sid.
I have implemented the SAP notes 1065285 and 1076772, but it was not sucessfull.
<b>As well as open tasks as system monitoring are no longer visible in the Tcode DSWP.</b>
Has some one the same problem or can help me to solve this problem?
Thank you very much
regards
Thom

Hello Thom,
did have a look at SAP Note 1038134?
If you are using Solution Mnager roles for System Monitoring the authorization check has changed and you need to maintain authorization object S_SOLM_ACT.
Best regards,
annett

System Monitoring / Administration asking for logon id

Each time I click on, "System Monitoring / Administration" in DSWP, a dialog box pops up asking me for a username and password. I've tried using the local system admin password, SAP*, my own SAP logon id, the J2EE_ADMIN user, etc.. but the dialog box just keeps popping back up. This doesn't happen under any other tab (i.e. Early Watch). If I hit cancel, I get the error below:
Logon failed
What has happened?
Call of URL http://sapsolman.mpfs.maines.net:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm terminated due to error in logon data.
Note
Logon performed in system SMS.
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:100-l:E-T:21-C:3-U:54-P:54-L:3
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Please tell me what I need to do to fix this authorization issue. Thank you.

Hi,
When it pops up for a logon details, please check below to which system is it connecting? Then the communication user which is being used in both the Managed and Managing system will be locked. After unlocking the user in the Managed system the issue will be resolved.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Nov 25, 2009 7:10 AM

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

System Monitoring Graphics- Page not opening..

We are trying to setup the System monitoring setup between Solman and ECC, All the config part done using simulator software.
Now when I click DSWP - operations - System Monitoring receive an error message page cannot be displayed..
But when I open the link from windows server its working fine.
Couls somone reply how to fix it ?.
Thanks
Thirumal

Hi Nelis,
I cleared the Cache and temporary internet files, and rebooted the sap and windows server too.
still shows the same error like page cannot be displayed.
MY SAP Solman system Installation number is SAP-INTERN and ECC installation number is "Initial" with licensed one till december 2008.
1.in this is it a problem with installation number ?..
2. Is their Any one configured the System monitoring with installaton number INITIAL or SAP-INTERN ?
Thanks
Thirumal.

System Landscape page will not show - still loading

Hi,
We have installed EP6.0 after updating SP16 , there are some ivews not showing. When you click system loading then finally we are noat able to see any ivews.
For example - System administation-system configuration -- then we are not able to see any ivews.
Some of the other menus are also same.
We are trying to login as "administrator".
After that we have created user with admin privilagtes , even no user not able to login into the system
Ay suggestions for this.
Thanks,
Chimsik

Hi,
1.Go To System Administration - > Permissions
Set Permissions for your users for Portal Content and check .
2.Also check whether you are using FQDN ie abc.company.com instead of IP address.
3.Also add an entry to c:/Windows/System32/Drivers/etc/host file
eg: 10.11.22.33 abc.company.com
Hope it helps.
Regards,
venkat

Workflow Created Tasks not showing up in My Tasks

I'm relatively new to SharePoint and am having trouble with the My Tasks list in SharePoint 2013. Tasks created manually in any task list show up in My Tasks as expected. However, tasks that are created by a workflow using create item in list
for that same list do not appear in My Tasks.
This is true for both tasks assigned to a group and tasks assigned to a specific user.
It has proven frustrating to attempt to google this issue.
Any suggestions?

Hi briandoyle,
Did this happen to all users that the tasks created by workflow aren't displayed in users' My Tasks in MySite?
Have you run a full crawl from Search service application, and also check if creating a new task view with filter option include group, and the following posts should be useful you can check.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/4959c10b-c1f3-4051-acf6-acf5135ac0cd/workflow-tasks-not-visible-in-my-tasks-list?forum=sharepointgeneral
http://blogs.perficient.com/microsoft/2012/09/sharepoint-2013-task-management-in-my-sites/
Thanks
Daniel Yang
TechNet Community Support

Administrator Account not showing anything

I am the administrator in a school G5 lab. We have suddenly had computers that will not really allow us to log in to the administrator account. Or at least, the password works, it says it's logging in, the background changes, but there are no icons, task bars or anything showing when it logs in. You cannot do anything except turn the computer off and on again and log in to a student account. Any ideas why a few (not all of the computers) do this?

Don't know, but if you can log into the student account, System Preferences->Accounts->unlock the lock using the admin username/password combo, create a new admin user account, log out and into the new user account, delete the original admin account, saving its data, recreate it, log back into the restored account, transfer the saved data from the disk image file in /Users/Deleted Users/, delete the newly created admin account, and you should be good to go.

AD contains system Recovery Key, but not showing in MBAM.

I am in an environment with MBAM 1.0 installed. I built the MDT 2013 system here and am currently trying to figure out why the bitlocker keys are showing up in AD but not MBAM.
In MDT, I have disabled the "enable bitlocker" options so there shouldn't be a case where that the TPM ownership is wrong (I think). I do however set the
bios password with CCTK, then apply the default bios configuration with an ini via cctk. The bios sets and activates tpm just before the hard disk is formatted by LTI.
q1. Could setting the TPM without restarting cause the TPM ownership to be set to the PE in some weird way.
q1.1. would I clear the tpm if this is the issue?
So MBAM client is installed on the reference image and captured by MDT. The WIM is then deployed to a system using a standard TS with the bitlocker disabled like
I mentioned above. I do not make any changes to reg for mbam in the reference image. For testing, I tried adding the mbam recovery key location url to the reference image reg. I still need to test that but a few other tests I did makes me believe this
is not the case.
MDT binds the system to a default OU in the domain. After the system is configured, I start Bitlocker. (Sometimes I start bitlocker when the system is in the default
OU, sometimes I start it after I move them into the right ou for the role). I am almost positive the default OU has the mbam settings (I do not have access to this gpo), since the manage-bde -status comes back AES 128 with diffuser (as compared to regular
aes 128).
After bitlocker finishes, the key is found in AD but not mbam.
I think the major questions I have are:
How can I force MBAM to take ownership of the TPM after the os is bitlockered? (about 100/700 machines are not reporting to mbam but are to bitlocker because of this new deployment system)
If I turn TPM on and activate while I was in the PE, would that mean the PE has the TPM ownership? (or bitlocker in this case, since mbam is not installed on the PE)
- Could I install MBAM on the PE and use that to manage the tpm? (MDT 2013) (I have seen some documents that cover this but it largely comes from wanting a pre-provisioned bitlocker.)
** I think the most manual way of correcting the issue I am having, is to either clear the tpm and rebitlocker, or
.. when a system is about to image, turn tpm on but leave it deactivated. (If I leave the tpm deactivated, every system will need to be manually rebooted and f10 will need to be pressed to continue the bitlocker process. this includeds
a user login too)

Keep the MBAM out of the .wim! Install it in task sequence.
MBAM Client has its own log files in event viewer, there you perhaps find the reason why recovery key is not stored in DP. But fix your image first, keep it thin.

Watch/Monitor Buttons do not show the correct state

I programmed several Watch buttons on SPA500 module and some buttons stay lit red even though the phones are not used. When pressing the button it does call the Vacant phone.
How can I fix the state to be correct and only be lit red when the corrsponding phone is used?

Hi Guys,
Was this problem ever resolved?
I am having the same issue. Cisco CME on 2851 router. We have several Cisco 7970 IP Phones all provisioned at the same time, and all working fine. I have a 7914 module monitoring the phones and one is showing as off hook. (BLF -1).
The phone that is showing offhook is ephone 7, it is being monitored by ephone 4. I have done factory reset, firmware upgrade, reset and everything recommended above but still having the issue. The red light indicates that the phone is offhook or not present although it is cleary registered to the CME.
You can see from the show ephone register below (ephone 4 is monitoring ephone 7) that ephone 7 is showing as offhook when it is not and is also registered and working. It shows:
button 33: cw:1 ccw:(0 0)
dn 22 number 122 CH1   IDLE         CH2   IDLE         watch(BLF on phone -1) shared with monitor-ring
I have attached config and tftp debug below. If any one can shed some light it would be much appreciated.
------------------ show running-config ------------------
Building configuration...
Current configuration : 33299 bytes
! Last configuration change at 18:09:53 AEST Mon Jun 4 2012
! NVRAM config last updated at 18:09:56 AEST Mon Jun 4 2012
! NVRAM config last updated at 18:09:56 AEST Mon Jun 4 2012
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname CISCO
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.151-4.M1.bin
boot-end-marker
card type t1 0 0
! card type command needed for slot/vwic-slot 0/1
enable password
aaa new-model
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
clock timezone AEST 10 0
no network-clock-participate wic 0
dot11 syslog
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.0.0.1 10.0.0.199
ip dhcp pool cisco
network 10.0.0.0 255.255.255.0
option 150 ip 10.0.0.1
default-router 10.0.0.138 10.0.0.1
dns-server x.x.x.x x.x.x.x
ip name-server x.x.x.x
ip name-server x.x.x.x
no ipv6 cef
multilink bundle-name authenticated
password encryption aes
voice service voip
ip address trusted list
ipv4 204.9.161.164
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
h323
vpn-group 1
vpn-gateway 1 http://10.0.0.15
vpn-trustpoint 1 trustpoint _Certificate leaf
vpn-hash-algorithm sha-1
vpn-profile 1
host-id-check disable
sip
registrar server expires max 3600 min 3600
localhost dns:sip.skype.com
voice class codec 1
codec preference 1 g711ulaw
voice class permanent 1
signal timing oos restart 50000
signal timing oos timeout disabled
signal keepalive disabled
signal sequence oos no-action
voice class custom-cptone telstra
dualtone disconnect
frequency 425
cadence 375 375
voice class custom-cptone conference
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 100 200 100 200 100
voice register global
mode cme
source-address 10.0.0.1 port 5060
max-dn 25
max-pool 25
authenticate register
timezone 47
hold-alert
mwi stutter
voicemail 999
tftp-path flash:
create profile sync 0007934814052285
voice register dn 1
number 201
name B iPhone
no-reg
label 201
voice register dn 2
number 202
name D iPhone
no-reg
label 202
voice register dn 3
number 203
name C iPhone
no-reg
label 203
voice register dn 4
number 204
name K iPad
no-reg
label 204
voice register pool 1
registration-timer max 720 min 660
id mac 50EA.D669.27A3
session-transport tcp
type CiscoMobile-iOS
number 1 dn 1
dtmf-relay rtp-nte
username user201 password 201
no vad
voice register pool 2
registration-timer max 720 min 660
id mac 148F.C646.6CFA
session-transport tcp
type CiscoMobile-iOS
number 1 dn 2
dtmf-relay rtp-nte
username user202 password 202
no vad
voice register pool 3
registration-timer max 720 min 660
id mac DC2B.6198.4F3D
session-transport tcp
type CiscoMobile-iOS
number 1 dn 3
dtmf-relay rtp-nte
username user203 password 203
no vad
voice register pool 4
registration-timer max 720 min 660
id mac 70DE.E239.73B8
session-transport tcp
type CiscoMobile-iOS
number 1 dn 4
dtmf-relay rtp-nte
username user204 password 204
no vad
voice translation-rule 1
rule 1 /$.*$/ /100/
voice translation-rule 2
rule 1 /^.*/ /xxxxxxxxxxxxxx/
voice translation-rule 3
rule 1 /617xxxxxxxx/ /130/
voice translation-rule 4
rule 1 /^004$........$/ /614\1/
rule 2 /^099$.*$/ /\1/
rule 3 /^0$.*$/ /\1/
voice translation-rule 5
rule 1 /617xxxxxxxx/ /130/
rule 2 /$.*$/ /100/
voice translation-profile INBOUND
translate called 5
voice translation-profile PSTN_Outbound
translate calling 2
translate called 4
voice translation-profile SKYPE_IN
translate called 3
voice-card 0
dspfarm
dsp services dspfarm
interface Loopback0
ip address 11.1.1.1 255.255.255.255
h323-gateway voip interface
h323-gateway voip bind srcaddr 11.1.1.1
interface Loopback2
ip address 10.10.10.10 255.255.255.0
interface Tunnel1
no ip address
interface GigabitEthernet0/0
description ETH-LAN
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
no mop enabled
interface GigabitEthernet0/1
description $ETH-LAN$
ip address 192.168.0.1 255.255.255.0
ip access-group 2 in
duplex auto
speed auto
no cdp enable
interface Service-Engine1/0
ip unnumbered GigabitEthernet0/0
service-module ip address 10.0.0.20 255.255.255.0
service-module ip default-gateway 10.0.0.1
no cdp enable
interface Virtual-Template1 type tunnel
ip unnumbered GigabitEthernet0/0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Virtual-Template2
ip unnumbered Loopback2
interface Vif1
ip address 192.168.11.1 255.255.255.252
ip pim dense-mode
ip local pool SDM_POOL_1 10.0.0.75 10.0.0.95
ip local pool SDM_POOL_2 10.1.0.2 10.1.0.50
ip local pool SDM_POOL_3 192.168.1.50 192.168.1.60
no ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:gui
ip flow-export destination 10.0.0.239 2055
ip nat inside source list VPNAccess interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 10.0.0.138
ip access-list standard public
ip access-list extended VPNAccess
remark Allow VPN clients to access LAN
remark CCP_ACL Category=2
remark Allow CPN local LAN
permit ip 192.168.1.0 0.0.0.255 any
access-list 100 remark CCP_ACL Category=4
access-list 100 permit ip 10.0.0.0 0.0.0.255 any
no cdp run
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:apps70.8-3-0-50.sbn
tftp-server flash:cnu70.8-3-0-50.sbn
tftp-server flash:cvm70sccp.8-3-0-50.sbn
tftp-server flash:dsp70.8-3-0-50.sbn
tftp-server flash:jar70sccp.8-3-0-50.sbn
tftp-server flash:S00105000300.sbn
tftp-server flash:SCCP70.8-3-1S.loads
tftp-server flash:XMLDefault.cnf.xml
tftp-server flash:United_States/g3-tones.xml
tftp-server flash:English_United_States/td-sccp.jar
tftp-server flash:English_United_States/ipc-sccp.jar
tftp-server flash:P00308000600.bin
tftp-server flash:P00308000600.sb2
tftp-server flash:P00308000600.loads
tftp-server flash:P00308000600.sbn
tftp-server flash:apps70.8-4-1-23.sbn
tftp-server flash:cnu70.8-4-1-23.sbn
tftp-server flash:cvm70sccp.8-4-1-23.sbn
tftp-server flash:dsp70.8-4-1-23.sbn
tftp-server flash:jar70sccp.8-4-1-23.sbn
tftp-server flash:SCCP70.8-4-2S.loads
tftp-server flash:S00105000400.sbn
tftp-server flash:RingList.xml
tftp-server flash:DistinctiveRingList.xml
tftp-server flash:Ring1.raw
tftp-server flash:Ring2.raw
tftp-server flash:Ring3.raw
tftp-server flash:apps70.9-0-3TH1-22.sbn
tftp-server flash:cnu70.9-0-3TH1-22.sbn
tftp-server flash:cvm70sccp.9-0-3TH1-22.sbn
tftp-server flash:dsp70.9-0-3TH1-22.sbn
tftp-server flash:jar70sccp.9-0-3TH1-22.sbn
tftp-server flash:SCCP70.9-0-3S.loads
tftp-server flash:apps45.9-0-3TH1-22.sbn
tftp-server flash:cnu45.9-0-3TH1-22.sbn
tftp-server flash:cvm45sccp.9-0-3TH1-22.sbn
tftp-server flash:dsp45.9-0-3TH1-22.sbn
tftp-server flash:jar45sccp.9-0-3TH1-22.sbn
tftp-server flash:SCCP45.9-0-3S.loads
tftp-server flash:term65.default.loads
tftp-server flash:term45.default.loads
tftp-server flash:cmterm_7936.3-3-21-0.bin
control-plane
voice-port 0/2/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/2/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/2/2
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/2/3
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/3/0
auto-cut-through
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/0
sccp ccm 10.0.0.1 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/0
associate ccm 1 priority 1
associate profile 1 register confdsp1
keepalive retries 5
dspfarm profile 1 conference
codec g711ulaw
codec g729br8
codec g729r8
codec g711alaw
codec g729ar8
codec g729abr8
maximum conference-participants 16
maximum sessions 3
conference-join custom-cptone jointone
conference-leave custom-cptone leavetone
associate application SCCP
dial-peer voice 1 pots
translation-profile incoming INBOUND
preference 3
destination-pattern 0T
direct-inward-dial
port 0/2/0
dial-peer voice 2 pots
translation-profile incoming INBOUND
preference 2
destination-pattern 0T
direct-inward-dial
port 0/2/1
dial-peer voice 3 pots
translation-profile incoming INBOUND
preference 1
destination-pattern 0T
direct-inward-dial
port 0/2/2
dial-peer voice 4 pots
shutdown
port 0/2/3
dial-peer voice 10 voip
destination-pattern 99.
session protocol sipv2
session target ipv4:10.0.0.20
incoming called-number .
dtmf-relay cisco-rtp
codec g711ulaw
no vad
dial-peer voice 100 voip
description **Incoming Call from Skype SIP Trunk**
translation-profile incoming SKYPE_IN
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 101 voip
description **Outgoing Call from Skype SIP Trunk**
translation-profile outgoing PSTN_Outbound
destination-pattern 004........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 5 pots
description **Outgoing Mobile Failover**
preference 4
destination-pattern *04........
direct-inward-dial
port 0/2/2
dial-peer voice 102 voip
description **Outgoing Call to Skype - THAILAND**
translation-profile outgoing PSTN_Outbound
destination-pattern 066.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 103 voip
description **Outgoing Call to Skype - UK**
translation-profile outgoing PSTN_Outbound
destination-pattern 044..........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 104 voip
description **Outgoing Call to Skype - Internat-ALL**
translation-profile outgoing PSTN_Outbound
destination-pattern 099T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 700 voip
destination-pattern 70.
session protocol sipv2
session target ipv4:10.0.0.20
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 712 voip
destination-pattern A712
session protocol multicast
session target ipv4:237.111.0.0:22222
voice-class permanent 1
dtmf-relay cisco-rtp
codec g711ulaw
vad aggressive
dial-peer voice 713 voip
destination-pattern A713
session protocol multicast
session target ipv4:237.111.0.1:22222
voice-class permanent 1
dtmf-relay cisco-rtp
codec g711ulaw
vad aggressive
dial-peer voice 70 pots
preference 1
destination-pattern 712
dial-peer voice 71 pots
preference 2
destination-pattern 712
dial-peer voice 72 pots
preference 3
destination-pattern 712
sip-ua
credentials username xxxxxxxxxxxxxx password 7 realm sip.skype.com
authentication username xxxxxxxxxxxxxx password 7
no remote-party-id
retry invite 2
retry register 10
registrar dns:sip.skype.com expires 3600
sip-server dns:sip.skype.com
host-registrar
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 3
sdspfarm tag 1 confdsp1
conference hardware
video
authentication credential xxxxx xxxxx
xml user xxxxx password xxxxx 15
max-ephones 96
max-dn 110 no-reg
ip source-address 10.0.0.1 port 2000
auto assign 1 to 24
service phone videoCapability 1
timeouts interdigit 5
system message xxxxx Pty Ltd
url directories http://10.0.0.1:80/localdirectory
url services http://10.0.0.20/voiceview/common/login.do
url authentication http://10.0.0.1/CCMCIP/authenticate.asp
cnf-file perphone
load 7914 S00105000400
load 7936 cmterm_7936.3-3-21-0
load 7960-7940 P00308000600
load 7965 term65.default
load 7970 term70.default
time-zone 47
time-format 24
date-format dd-mm-yy
live-record 998
voicemail 999
max-conferences 3 gain -6
call-park system application
moh music-on-hold.au
web admin system name xxxxx secret 5 xxxxxxxxxxxxxxxx
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 0
transfer-pattern 2..
transfer-pattern 7..
secondary-dialtone 0
directory entry 1 100 name Reception
fac standard
create cnf-files version-stamp 7960 Jun 04 2012 17:24:26
ephone-template 1
url services 2 http://xxxxxxlawyers.com/phone/xmldir/PhoneUI/ xxxxxxLawyers_DIRECTORY
url services 3 http://jivait.com/phone/rss2cisco.pl NEWS@
park reservation-group 1
softkeys idle Dnd Newcall Gpickup Pickup Cfwdall Redial ConfList Join RmLstC Login
softkeys seized Callback Cfwdall Endcall Gpickup HLog Meetme Pickup Redial
softkeys connected Hold Endcall Trnsfer Park TrnsfVM Confrn ConfList Select Join Acct LiveRcd Flash
ephone-template 2
url services 2 http://phone-xml.berbee.com/menu.xml TEST
ephone-template 3
park reservation-group 1
softkeys idle Dnd Newcall Gpickup Pickup Cfwdall Redial Login
softkeys seized Callback Cfwdall Endcall Gpickup HLog Meetme Pickup Redial
softkeys connected Hold Endcall Trnsfer Park TrnsfVM Confrn ConfList Join
ephone-template 4
park reservation-group 1
softkeys seized Meetme Gpickup Pickup Redial
softkeys connected Hold Trnsfer Park LiveRcd Endcall Confrn ConfList Select Join Acct
ephone-dn 1 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception
call-forward noan 999 timeout 40
huntstop channel
no huntstop
ephone-dn 2 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception2
preference 1
call-forward noan 999 timeout 40
huntstop channel
no huntstop
ephone-dn 3 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception3
preference 2
call-forward noan 999 timeout 40
huntstop channel
no huntstop
ephone-dn 4 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception4
preference 3
call-forward busy 999
call-forward noan 999 timeout 40
huntstop channel
ephone-dn 9 dual-line
number 130 secondary 617xxxxxxxx no-reg both
pickup-group 1
label Private Line (07 xxxx xxxx)
description 07 xxxx xxxx
name Skype1
ephone-dn 10 dual-line
number 101 no-reg primary
pickup-group 1
label Ben xxxxxx (101)
description Extension 101
name Ben xxxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 11 dual-line
number 102 no-reg primary
pickup-group 1
label Drew xxxxx (102)
description Extension 102
name Drew xxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 12 dual-line
number 103 no-reg primary
pickup-group 1
label xxxxx xxxxxx (103)
description Extension 103
name xxxxx xxxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 13 dual-line
number 104 no-reg primary
pickup-group 1
label Dennis xxxxx (104)
description Extension 104
name Dennis xxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 14 dual-line
number 105 no-reg primary
pickup-group 1
label Meeting Room (105)
description Extension 105
name Meeting Room
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 15 dual-line
number 106 no-reg primary
pickup-group 1
label Front Desk
description Extension 106
name Front Desk
call-forward busy 100
call-forward noan 100 timeout 45
ephone-dn 16 dual-line
number 107 no-reg primary
pickup-group 1
label Server
description Extension 107
name Server
call-forward busy 100
call-forward noan 100 timeout 45
ephone-dn 19 dual-line
number 119 no-reg primary
pickup-group 1
label Cordless
description Extension 119
name Cordless
call-forward busy 100
call-forward noan 100 timeout 30
ephone-dn 20 dual-line
number 121 no-reg primary
pickup-group 1
label Front Reception
description Extension 121
name Front Reception
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 21 dual-line
number 120 no-reg primary
pickup-group 1
label Conference Phone
description Extension 120
name Conference Phone
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 22 dual-line
number 122 no-reg primary
pickup-group 1
label Reception
description Extension 122
name Reception
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 25 dual-line
number 126 no-reg primary
pickup-group 1
label xxxxxx SoftPhone
description Extension 126
name SoftPhone1
ephone-dn 51
number 151 no-reg primary
label Line-1(5288)-Monitor ONLY
trunk 1 monitor-port 0/2/0
ephone-dn 52
number 152 no-reg primary
label Line-2(5232)-Monitor ONLY
trunk 1 monitor-port 0/2/1
ephone-dn 53
number 153 no-reg primary
label Line-3(5404)-Monitor ONLY
trunk 1 monitor-port 0/2/2
ephone-dn 98
number 998 no-reg primary
call-forward all 999
ephone 1
device-security-mode none
video
mac-address 0018.73E2.34D9
ephone-template 1
username "user1" password xxxxxx
paging-dn 32
type 7970 addon 1 7914
button 1o1,2,3,4 2:51 3:52 4:53
button 5:54 6m90 7m91 8m92
button 9w10 10w11 11w12 12w13
button 13w14 16:41 17:43 18:45
ephone 2
device-security-mode none
video
mac-address 000A.B84C.483F
ephone-template 1
username "user2" password xxxxxx
paging-dn 32
type 7970
button 1:10 2:9 3:42 4m90
button 5m91
ephone 3
device-security-mode none
video
mac-address 0019.2FE3.95A1
ephone-template 1
username "user3" password xxxxxx
fastdial 1 00413093639 name Catherine
fastdial 2 00432030586 name Ben
paging-dn 32
type 7970
button 1:11 3w10 4w13 5m90
button 6m91 7:46
ephone 4
device-security-mode none
video
mac-address 0019.2FE3.94F6
ephone-template 1
username "user4" password xxxxxx
speed-dial 1 00408760740 label "IT Support"
paging-dn 32
type 7970 addon 1 7914 2 7914
button 1:12 2:9 3o1,2,3,4 9:51
button 10:52 11:53 12:54 15m90
button 16m91 17m92 23:41 24:43
button 25:45 29w10 30w11 31w13
button 32w14 33w22 34w19 35:21
ephone 5
device-security-mode none
mac-address 0019.2FB9.CA32
ephone-template 1
username "user5"
paging-dn 32
type 7970
button 1:13 2:44 3m90 4m91
ephone 6
device-security-mode none
mac-address 000A.B84C.4598
ephone-template 1
username "user6"
paging-dn 32
type 7970
button 1:14 2m90
ephone 7
device-security-mode none
mac-address 0018.73E2.369B
ephone-template 1
username "user7"
paging-dn 32
type 7970
button 1o1,2,3,4 2:22
ephone 8
device-security-mode none
mac-address 0015.5832.54A3
ephone-template 2
type CIPC
button 1:25 2m1
line con 0
exec-timeout 0 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
exec-timeout 0 0
password
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 150.101.221.106
webvpn gateway gateway_1
ip address 10.0.0.15 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1560239260
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.0.3054-k9.pkg sequence 1
end
============================================================================
Jun 5 00:28:44.922: TFTP: Looking for term70.default.loads
Jun 5 00:28:44.922: TFTP: Opened flash:term70.default.loads, fd 2, size 660 for process 314
Jun 5 00:28:44.930: TFTP: Finished flash:term70.default.loads, time 00:00:00 for process 314
Jun 5 00:28:46.054: TFTP: Looking for jar70sccp.9-0-3TH1-22.sbn
Jun 5 00:28:46.058: TFTP: Opened flash:jar70sccp.9-0-3TH1-22.sbn, fd 2, size 1828680 for process 314
Jun 5 00:28:52.018: TFTP: Finished flash:jar70sccp.9-0-3TH1-22.sbn, time 00:00:05 for process 314
Jun 5 00:28:57.490: TFTP: Looking for cnu70.9-0-3TH1-22.sbn
Jun 5 00:28:57.490: TFTP: Opened flash:cnu70.9-0-3TH1-22.sbn, fd 2, size 506761 for process 314
Jun 5 00:28:59.134: TFTP: Finished flash:cnu70.9-0-3TH1-22.sbn, time 00:00:01 for process 314
Jun 5 00:29:01.242: TFTP: Looking for apps70.9-0-3TH1-22.sbn
Jun 5 00:29:01.246: TFTP: Opened flash:apps70.9-0-3TH1-22.sbn, fd 2, size 3084262 for process 314
Jun 5 00:29:07.243: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has unregistered abnormally.
Jun 5 00:29:11.219: TFTP: Finished flash:apps70.9-0-3TH1-22.sbn, time 00:00:09 for process 314
Jun 5 00:29:19.791: TFTP: Looking for dsp70.9-0-3TH1-22.sbn
Jun 5 00:29:19.791: TFTP: Opened flash:dsp70.9-0-3TH1-22.sbn, fd 2, size 540433 for process 314
Jun 5 00:29:21.559: TFTP: Finished flash:dsp70.9-0-3TH1-22.sbn, time 00:00:01 for process 314
Jun 5 00:29:23.619: TFTP: Looking for cvm70sccp.9-0-3TH1-22.sbn
Jun 5 00:29:23.623: TFTP: Opened flash:cvm70sccp.9-0-3TH1-22.sbn, fd 2, size 2166976 for process 314
Jun 5 00:29:30.807: TFTP: Finished flash:cvm70sccp.9-0-3TH1-22.sbn, time 00:00:07 for process 314
Jun 5 00:31:07.536: TFTP: Looking for CTLSEP001873E2369B.tlv
Jun 5 00:31:07.636: TFTP: Looking for ITLSEP001873E2369B.tlv
Jun 5 00:31:07.748: TFTP: Looking for ITLFile.tlv
Jun 5 00:31:08.004: TFTP: Looking for SEP001873E2369B.cnf.xml
Jun 5 00:31:08.004: TFTP: Opened system:/its/vrf1/SEP001873E2369B.cnf.xml, fd 2, size 1543 for process 314
Jun 5 00:31:08.012: TFTP: Finished system:/its/vrf1/SEP001873E2369B.cnf.xml, time 00:00:00 for process 314
Jun 5 00:31:14.424: TFTP: Looking for English_United_States/td-sccp.jar
Jun 5 00:31:14.428: TFTP: Opened flash:English_United_States/td-sccp.jar, fd 2, size 67385 for process 314
Jun 5 00:31:14.756: TFTP: Finished flash:English_United_States/td-sccp.jar, time 00:00:00 for process 314
Jun 5 00:31:15.480: TFTP: Looking for United_States/g3-tones.xml
Jun 5 00:31:15.480: TFTP: Opened flash:United_States/g3-tones.xml, fd 2, size 1036 for process 314
Jun 5 00:31:15.488: TFTP: Finished flash:United_States/g3-tones.xml, time 00:00:00 for process 314
Jun 5 00:31:31.604: %IPPHONE-6-REG_ALARM: 25: Name=SEP001873E2369B Load= term70.default Last=Initialized
Jun 5 00:31:31.652: %IPPHONE-6-REGISTER: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has registered.
Jun 5 00:31:33.228: %IPPHONE-6-UNREGISTER_NORMAL: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has unregistered normally.
Jun 5 00:32:34.333: TFTP: Looking for CTLSEP001873E2369B.tlv
Jun 5 00:32:34.413: TFTP: Looking for ITLSEP001873E2369B.tlv
Jun 5 00:32:34.521: TFTP: Looking for ITLFile.tlv
Jun 5 00:32:34.853: TFTP: Looking for SEP001873E2369B.cnf.xml
Jun 5 00:32:34.853: TFTP: Opened system:/its/vrf1/SEP001873E2369B.cnf.xml, fd 2, size 1543 for process 314
Jun 5 00:32:34.861: TFTP: Finished system:/its/vrf1/SEP001873E2369B.cnf.xml, time 00:00:00 for process 314
Jun 5 00:32:39.861: %IPPHONE-6-REG_ALARM: 25: Name=SEP001873E2369B Load= term70.default Last=Initialized
Jun 5 00:32:39.905: %IPPHONE-6-REGISTER: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:13 DeviceType:Phone has registered.
OLSENCISCO#
=====================================================
ephone-1[0] Mac:0018.73E2.34D9 TCP socket:[17] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.221 * 52191 7970 sub=1 keepalive 2082 max_line 22 available_line 22
Phone reports 22 Available Lines
button 1: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 2: cw:1 ccw:(0)
dn 51 number 151 CH1   IDLE         shared
button 3: cw:1 ccw:(0)
dn 52 number 152 CH1   IDLE         shared
button 4: cw:1 ccw:(0)
dn 53 number 153 CH1   IDLE         shared
button 5: cw:1 ccw:(0)
dn 54 number 154 CH1   IDLE         shared with monitor-ring
button 6: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 7: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
button 8: cw:1 ccw:(0)
dn 92 number 302 CH1   IDLE         monitor-ring shared
button 9: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
button 10: cw:1 ccw:(0 0)
dn 11 number 102 CH1   IDLE         CH2   IDLE         watch(BLF on phone 3) shared with monitor-ring
button 11: cw:1 ccw:(0 0)
dn 12 number 103 CH1   IDLE         CH2   IDLE         watch(BLF on phone 4) shared
button 12: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
button 13: cw:1 ccw:(0 0)
dn 14 number 105 CH1   IDLE         CH2   IDLE         watch(BLF on phone 6) shared with monitor-ring
button 16: cw:1 ccw:(0)
dn 41 number A501 auto dial A502 CH1   IDLE         shared with monitor-ring
button 17: cw:1 ccw:(0)
dn 43 number A503 auto dial A504 CH1   IDLE         shared with monitor-ring
button 18: cw:1 ccw:(0)
dn 45 number A505 auto dial A506 CH1   IDLE         shared with monitor-ring
FXO Port Monitoring Status
button: 2 dn: 51 FXO Port: 0/2/0 Status: Idle
button: 3 dn: 52 FXO Port: 0/2/1 Status: Idle
button: 4 dn: 53 FXO Port: 0/2/2 Status: Idle
button: 5 dn: 54 FXO Port: 0/2/3 Status: Idle
overlay 1: 1(100) 2(100) 3(100) 4(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user1 Password:xxxxxxxx
ephone-2[1] Mac:000A.B84C.483F TCP socket:[15] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.216 * 52908 7970 keepalive 2081 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 2: cw:1 ccw:(0 0)
dn 9 number 130 CH1   IDLE         CH2   IDLE         shared
button 3: cw:1 ccw:(0)
dn 42 number A502 auto dial A501 CH1   IDLE
button 4: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 5: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user2 Password: xxxxxxxx
ephone-3[2] Mac:0019.2FE3.95A1 TCP socket:[16] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.223 * 49428 7970 keepalive 2069 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 11 number 102 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 3: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
button 4: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
button 5: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 6: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
button 7: cw:1 ccw:(0)
dn 46 number A506 auto dial A505 CH1   IDLE
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user3 Password: xxxxxxxx
ephone-4[3] Mac:0019.2FE3.94F6 TCP socket:[19] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.201 * 52711 7970 sub=2 keepalive 2050 max_line 36 available_line 35
Phone reports 35 Available Lines
button 1: cw:1 ccw:(0 0)
dn 12 number 103 CH1   IDLE         CH2   IDLE         shared
button 2: cw:1 ccw:(0 0)
dn 9 number 130 CH1   IDLE         CH2   IDLE         shared
button 3: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 9: cw:1 ccw:(0)
dn 51 number 151 CH1   IDLE         shared
button 10: cw:1 ccw:(0)
dn 52 number 152 CH1   IDLE         shared
button 11: cw:1 ccw:(0)
dn 53 number 153 CH1   IDLE         shared
button 12: cw:1 ccw:(0)
dn 54 number 154 CH1   IDLE         shared with monitor-ring
button 15: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 16: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
button 17: cw:1 ccw:(0)
dn 92 number 302 CH1   IDLE         monitor-ring shared
button 23: cw:1 ccw:(0)
dn 41 number A501 auto dial A502 CH1   IDLE         shared with monitor-ring
button 24: cw:1 ccw:(0)
dn 43 number A503 auto dial A504 CH1   IDLE         shared with monitor-ring
button 25: cw:1 ccw:(0)
dn 45 number A505 auto dial A506 CH1   IDLE         shared with monitor-ring
button 29: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
button 30: cw:1 ccw:(0 0)
dn 11 number 102 CH1   IDLE         CH2   IDLE         watch(BLF on phone 3) shared with monitor-ring
button 31: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
button 32: cw:1 ccw:(0 0)
dn 14 number 105 CH1   IDLE         CH2   IDLE         watch(BLF on phone 6) shared with monitor-ring
button 33: cw:1 ccw:(0 0)
dn 22 number 122 CH1   IDLE         CH2   IDLE         watch(BLF on phone -1) shared with monitor-ring
button 34: cw:1 ccw:(0 0)
dn 19 number 119 CH1   IDLE         CH2   IDLE         watch(BLF on phone 16) shared with monitor-ring
button 35: cw:1 ccw:(0 0)
dn 21 number 120 CH1   IDLE         CH2   IDLE         shared with monitor-ring
FXO Port Monitoring Status
button: 9 dn: 51 FXO Port: 0/2/0 Status: Idle
button: 10 dn: 52 FXO Port: 0/2/1 Status: Idle
button: 11 dn: 53 FXO Port: 0/2/2 Status: Idle
button: 12 dn: 54 FXO Port: 0/2/3 Status: Idle
overlay 3: 1(100) 2(100) 3(100) 4(100)
speed dial 1:00408760740 IT Support
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user4 Password: xxxxxxxx
ephone-5[4] Mac:0019.2FB9.CA32 TCP socket:[14] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.222 * 51034 7970 keepalive 2129 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 2: cw:1 ccw:(0)
dn 44 number A504 auto dial A503 CH1   IDLE
button 3: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 4: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user5
ephone-6[5] Mac:000A.B84C.4598 TCP socket:[5] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.219 * 49291 7970 keepalive 2135 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 14 number 105 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 2: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user6
ephone-7[6] Mac:0018.73E2.369B TCP socket:[13] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.204 * 50084 7970 keepalive 100 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 2: cw:1 ccw:(0 0)
dn 22 number 122 CH1   IDLE         CH2   IDLE         shared with monitor-ring
overlay 1: 1(100) 2(100) 3(100) 4(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user7
ephone-11[10] Mac:001F.CA35.5721 TCP socket:[9] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9
IP:10.0.0.77 * 53104 7965 keepalive 1214 max_line 6 available_line 6
button 1: cw:1 ccw:(0 0)
dn 27 number 128 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 3: cw:1 ccw:(0)
dn 51 number 151 CH1   IDLE         shared
button 4: cw:1 ccw:(0)
dn 52 number 152 CH1   IDLE         shared
button 5: cw:1 ccw:(0)
dn 53 number 153 CH1   IDLE         shared
FXO Port Monitoring Status
button: 3 dn: 51 FXO Port: 0/2/0 Status: Idle
button: 4 dn: 52 FXO Port: 0/2/1 Status: Idle
button: 5 dn: 53 FXO Port: 0/2/2 Status: Idle
overlay 2: 1(100) 2(100) 3(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user11 Password: xxxxxxxx
ephone-13[12] Mac:000D.BCE9.7533 TCP socket:[1] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.235 * 50792 Telecaster 7940 keepalive 2143 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 15 number 106 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
overlay 2: 1(100) 2(100) 3(100) 4(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user13 Password: xxxxxxxx
ephone-15[14] Mac:0014.6A87.716A TCP socket:[2] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=1
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.236 * 50649 Telecaster 7940 keepalive 2142 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 16 number 107 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none
ephone-16[15] Mac:0019.55EC.B6FF TCP socket:[7] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 1/1 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.0.0.185 * 10664 ATA Phone keepalive 2139 max_line 1 available_line 0
button 1: cw:1 ccw:(0 0)
dn 19 number 119 CH1   IDLE         CH2   IDLE         shared with monitor-ring
Preferred Codec: g711ulaw
Lpcor Type: none Username: user16 Password: xxxxxxxx
ephone-17[16] Mac:1955.ECB6.FF01 TCP socket:[6] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 1/1 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:3
IP:10.0.0.185 * 10663 ATA Phone keepalive 2139 max_line 1 available_line 0
button 1: cw:1 ccw:(0 0)
dn 2 number 100 CH1   IDLE         CH2   IDLE         shared
Preferred Codec: g711ulaw
Lpcor Type: none
ephone-18[17] Mac:001B.2AC6.BE43 TCP socket:[3] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.77 * 51863 Telecaster 7940 keepalive 1232 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 28 number 129 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0 0)
dn 12 number 103 CH1   IDLE         CH2   IDLE         silent-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none
ephone-19[18] Mac:0004.F2E2.43E0 TCP socket:[8] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 4/3 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:4
IP:10.0.0.215 * 1038 7936 keepalive 2567 max_line 1 available_line 0
button 1: cw:1 ccw:(0 0)
dn 21 number 120 CH1   IDLE         CH2   IDLE         shared with monitor-ring
Preferred Codec: g711ulaw
Lpcor Type: none

System icons('docklets'?) Not showing anymore in top right corner.

Hi, this is my first time here, so I'm really sorry if this belongs somewhere else.
I got my first mac about 2 months ago and it has been running fine until abouta week ago the system icons stopped showing up in the top right hand corner. I can still see himmelbar and my printer icon there, but the Bluetooth, airport, time, spotlight, and fast user switching are all gone on all accounts.
Around the same time I have encountered that the system is sygnificantly less stable than it was before. I can consistantly crash the system prefrences by clicking on the mouse and keyboard settings, and there are other little things that cause programs to crash now.
I have tried repairing permisions already, and I have checked the disk for errors. Everything is fine in those two areas and I am truely at a loss to understand what is causing this.
If anyone can help, I would greatly appreciate it. I'd rather not re-install OSX but I will if I have to.
Thank you very much,
Jacob Wilson

They change colors when the background bar changes to enhance readability.
If you go to Settings > General > Accessibility and turn White on Black ON, the symbols will be black on a white bar for the home and some app screens and orange and purple on a black bar for other screens.

System Preferences status icons not showing in the Menubar.

After upgradind to Mavericks some System Preferences status icons stopped being shown in the Menubar.
Anyone experiencing the same?Can someone help with a tip for restoring the Menubar as it was in ML?

Open System Prefs...
Some but not all will have an option to show in the menu bar.
For third party apps, check in the app prefs and see if it has 'show in menu bar'.

Data appearing in VI Logger task not showing up in database but exists on disk

Using VI logger lite 2, we ran a task that upon completion, appeared in the data selection subtree of the task much like successful data runs. However, when one clicks on that data string, an error message stating that the task run selected cannot be found in the database is displayed. Interestingly, when one chooses to not check another database, the times the task ran at are correctly displayed (9:26 - 9:29 am). When viewing the database with the Historical Data module, the data does indeed not appear in the database. When examining the raw files for the database on disk, a series of .cdpg and a .cdib file exist that have a creation time that matches the end time of the task (within 2 hundreths of a second).
My questions in this scenario are, how do I recover this data, and what exactly has occured?
Thanks!
Wayne

Those look like Citadel 5 data types.
By the data string do you mean the name of the log? Such as "MM/DD/YYYY HH:MMS.mmm"?
As for why it is happening, I'm not sure. Could you give us a screen shot of the error along with the VI logger environment?
In the lite edition, you should be able to view in excel and export to html.
Maybe someone has a crafty way of doing it, but there doesn't seem to be a method readily available. I'm not very familiar with these file formats, but judging from this thread I don't think it is possible.
Trey B
Applications Engineering
National Instruments

Task not showing in UWL XML File

Hello Experts,
I am back with another query in less than a week.
Requirement:- There is a Transaction BNK_APP by which users do their task (approve reject etc) it triggers a workflow and then the workitems are generated and sent to SAP Inbox. These workitems are now shown in the users Inbox in UWL.
Users dont want to see these particular workitems in their inbox as they are required to do this via the transaction and not via UWL.
Workarounds:- I have been told that there is noway at all that this can be controlled from the workflow or the backend it has to be done by changing the UWL XML. Is it true that this situation cannot be achieved by changing or filtering the workflow or backend.
From Portal, I can
1. go into the xml file and delete that Workitem Task no.(TS50100025) and upload it with new name with priority "high" and good to go.
2. I can put something like this :
<ItemTypes>
<ItemType name="uwl.HiddenTask" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
<ItemTypeCriteria systemId="SAP_WebDynpro_XSS" externalType=" TS50100025" connector="WebFlowConnector"/>
</ItemType>
</ItemTypes>
BUT BUT, I feel very awkward telling you this, but in the XML i DID NOT find a single entry with the Task no. TS50100025. I switched on the Troubleshooting for UWL and saw that the config file was "uwl.webflow" with the same Task id. But when I checked the uwl.webflow XML I did not find an entry with that Task no. either.
Whats wrong ?? Why the task/workitem is being shown in UWL but not in the XML ?? Is it even possible ??
Edited by: Rajat Sharma on Nov 2, 2011 6:14 PM
Edited by: Rajat Sharma on Nov 2, 2011 6:14 PM

Hi Rajat,
For the items to appear in UWL, they need to be part of one of the XML files.
You are checking in wrong XML file.
Check in uwl.webflow.SAP_WebDynpro_XSS.
Second part, you don't need to or rather you shouldn't modify this ML file. Because every time you register the connector this file will be regenerated.
For more details on how to hide work items refer to SAP note 1437432.
In short
1. Create an XML file with any name say Hide Tasks.xml
2. An entry in this file might look like
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.webflow.DoNotDisplay12" connector="WebFlowConnector" defaultView="something" defaultAction="something" executionMode="default">
      <ItemTypeCriteria systemId="SAP_R3_FINANCIALS" externalType="TS00300025" connector="WebFlowConnector"/>
    </ItemType>
    </ItemTypes>
</UWLConfiguration>
Thanks
Prashant

Data Source for Current Task not Showing in SharePoint Designer 2013

Hello,
I am creating a approval workflow in SharePoint Designer 2013. I had completed the workflow only to have the requirement by the client that they wanted to approve the workflow from email. So I thought why not use the Current Task:Form_URN data source field.
But i went to look for it, and it doesnt appear to be in the drop down.
Im on Office 365, and using it for one of my SharePoint Sites. Im new to Office 365. Please help.

Hi ,
According to your description, my understanding is that you want to use Current Task:Form_URN to let users approve the task in email.
When we use SharePoint 2010 platform to create approval workflow with “Start Approval Process” action, in the approval notification email, there is a button called “Open this Task”with Outlook client. If we click the button, it will call the task and we
can approve or reject the task.
I added a log action into my approval workflow to log Current Task:Form_URN, the value of the log message was the edit form of the current task.
If you want to use it in email, you can do as the followings:
Open your approval workflow with SharePoint 2013 Designer (the platform of the workflow sould be SharePoint 2010 platform).
Edit the workflow
In the “Start Approval Process” action, click “Approval (*)”.
Click “Change the behavior of a single task”
In the “When a Task is Pending” section, find the action “Email task notification to
Current Task:Assigned To “, and edit it like the screenshot below.
Publish the workflow
Best Regards,
Wendy
Wendy Li
TechNet Community Support

DSWP - system monitoring/Administration - tasks not showing up

Similar Messages

Maybe you are looking for