Dtae/Time of First Responce not appearing in CRM_DNO_MONITOR report

Dear All,
When we execute the crm_dno_monitor report,in the report that is generated when Date of first reponse and time of first reponse is selected,the column shows no values.
Have anyone faced with the same problem?Please give the solution if it is closed.
Thanks and Regards,
Avinash.

hi,
Check for the entris in SPRO->Configuration->Scenario Setting-> service desk->general settings->Define transaction types.
Thx,
wasee,

Similar Messages

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

Time machine volume does not appear but backup works..

Hi. I have a Sno Leo server used for Time Machine backups. When I try to add a bew user to the backup, the backup volume does not appear (Time Machine Prefs > Select disk). The backup clients that have been previously set up work as normal.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

GL not appearing in PCA report S_ALR_87013336

Dear Experts,
For acct XXXX, there's balance & we can view line item thru FI (tcode: FBL4N). We can see PC been assigned to those line items, but the GL XXXX not reflecting in PCA report (tcode S_ALR_87013336).
GL XXXX is a Balance Sheet GL (not a Reconciliation GL). This GL is not added to 3KEH. There are other GLs too, which are not added to 3KEH, but still those are appearing in PCA report S_ALR)87013336.
If you can please advice about this discrepancy.
Regards,
Hussein.
Edited by: Hussein Merchant on Apr 18, 2011 5:05 PM

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

Field label not appearing in OIM Report Page

Hi,
Though this sounds like a silly problem, but I am not able to figure out what could be the problem.
I have created a new report in OIM and it is working perfectly fine as per the stored procedure. The only problem is that one of the label name is not appearing correctly in the report page display. It consists of the following fields:
1. First Name
2. Last Name
3. User iD
4. Custom field of the target application resource -say- abc.
In the xlWebAdmin.properties file, I added a new property for the custom field -
report.CustomReport.label.CustomField=abc
The same value has been written in the XML metadata of the report.
However, in the report page in OIM the label appears as - ???en_US.report.CustomReport.label.CustomField???
Please advice.
Regards.

Actually, we are getting a few errors while running the script and hence I was looking for any alternate, if possible.
java.io.IOException: java.io.IOException: /app/oracle/product/APP/10.1.3/j2ee/home/jsp/bin/ojspc: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
It is unable to locate "ojspc" path. I am not sure as to where this path is referenced. I have to change it there, so that it refers to thecorrect one.
Regards.

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

Transport of Query successful, but changes not appeared in the report

Hi All,
I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
For that User asked me to add one characteristic to Free characteristics.
I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
Help me here asap..
Thanks,
Chaitu.
Edited by: chaithu218 on Jun 21, 2011 10:37 AM
Edited by: chaithu218 on Jun 21, 2011 10:40 AM

Hi Chaithu,
As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
1) In development system too, do you have 2 versions?
2) In production system, check the UID for both verions of the query
3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
2 versions by same technical name can exist if:
1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
2) or due to system refresh, copy, etc.
Hope it helps.
Thanks,
Abhishek.

COPA - Planned Material Cost not appearing in KE30 report

Hi all
In COPA planning, I manually planned the Material cost (Material External Price) along with the Sales Quantity and Revenue for two company codes (one plant in each co code). But in KE30 report, I could see the material cost (MEP) values only for one company codeplant. What could be the issue?
I even tried valuation in KEPM. Valuation step is calculating and populating the material cost in KEPM, but the values are not flowing to KE30 reports. And this happens to only one of the two company codes.
Thanks
Vamsi

Hi Vamsi
Please check table CE2XXXX, where XXXX = Op Concern.... Here, can you see the plan line items??
If yes, then the issue is with your report definition in KE30... May be you are restricting values display in KE30 report by virtue of your selection parameters
br, Ajay M

Time Machine HD does not appear in Disk Utility

Hello,
I used Time Machine towards the end of 2007 on an external SATA HD through USB 2.0. I would frequently turn it on and let it do its thing and shut it off. One day I attempted to use Time Machine and it did not mount on my desktop. I've been searching around trying to discover a solution to this problem without any success. The HD does not show up in Disk Utility nor does it show up in XP when it is connected to my mobo with SATA. I did manage to see it under "Disk Management" in XP but was unable to assign it a drive letter. It showed the amount of space used but other than that I haven't been able to get it to work. I have since purchased a larger HD for time machine and all I really want to do is transfer over the contents of the currently non-working HD to the new HD and then format the old one. I'm asking around to see if any of my friends have an external SATA enclosure so I can find out if it is the enclosure or the HD but in the mean time is there anything I can do in Leopard (or Windows XP) to find out if the information is on the HD or if the HD is damaged?

I am sorry - I simply do not understand your instructions!
I have 2 Time Capsules and have been using both. However a few days ago they quit working. I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space. It does not delete old backups to provide additional space. I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives. Hence I turned Time Machine off.
There is nothing wrong with the MBP internal hard drive. "Sparse bundle" is total Greek to me! My wifi network appears to be working properly. The internal HD is mounted in Disk Utilities and verified as working properly. I am a long time user of Apple but I am still a novice (Level 1)!
Perhaps I should start a new thread.

Time Machine (Snow Leopard) not appearing in Migration Assistant (Lion)

Hi there,
I have an iMac that was running Snow Leopard with a Time Machine backup on a 1TB Iomega USB2 Ext HDD.
I just Erased and Installed Lion onto the iMac, expecting to use Migration Assistant to restore my files. However, Migration Assistant does not recognise my Time Machine Ext HDD, only the iMac's HDD, and it keeps searching for other computers.
The Ext HDD is there in Finder, and I can copy files to and from it... it just won't appear in Migration Assistant. I've patched Lion to 10.7.1, but that doesn't help.
I've read elsewhere about a Snow Leopard patch, but that doesn't seem to apply for Ext HDDs, only for backups from other computers.
I can copy things over manually, but was hoping to avoid it. Besdies taking a while, I'm not entirely sure how to restore all my iPhone data to iTunes and the like.
Any one got any advice?
Thanks.

It seems that
in order for Mac OS X to realize that it's a Time Machine drive, there should be an invisible "flag file" (0 bytes in size) at the root of the drive, called com.apple.timemachine.supported - if this file is missing for some reason, Migration Assistant won't pick it up.
not sure that it's true but worth trying.

Time zone menu does not appear when I turn on time zone support

I am trying to change the time zone on my calendar. When I turn on the time zone support in advanced preferences no time zone menu appears. Does anyone know another way to change the time zone?

The Time Zone menu appears in the System/Date & Time/Time Zone preference pane.

TS1760 Time machine backup does not appear Time Capsule

I have backed up my imac on my Time Capsule using Time Machine. Now, I want to restore this backup on my Macbook so that both computers are the same.
However, when I attach the Time Capsule to the Macbook, I do not see the backup that I just made from the imac. There is nothing to restore.
What to do?

You have to start with the Mac OS X DVD that came with your computer to restore your backup

Warning: the compile-time code checksum does not appear to be present

Hi,
Im getting this when booting up a 1252 ap.
any suggestions how to solve this?

How did you upgrade the IOS? Did you use the "copy" command and copied only the BIN file? The 12.4(21a), like the 12.4(10b), needs the entire TAR file to be extracted to the appliance because part of the package is a pair of radio module firmware.
Steve Rodriguez's post contain the exact command you need. I recommend that you follow them.

Dtae/Time of First Responce not appearing in CRM_DNO_MONITOR report

Similar Messages

Maybe you are looking for