Dtlogin background

Anyone know how to make the background for the dtlogin transparent?
I'm currently trying to create a slide show application that will shows up behind the dtgreet and it is getting covered up by the dtlogin's background.

try patch 114538-43, it has the pre-req 112233-12 or greater, which is a large kernel patch in itself.
Failing that try some of the X11 patches.

Similar Messages

How to set CAM Mode background wallpaper

Hi forum users,
Where can i download or find the "xv" application ?
Thanks.
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.
Anthony Worrall wrote:
In chapter 10 "Control Access Mode" of the "Sun Ray Server Software 3.1
Administrator's Guide for the Solaris Operating System"
http://docs.sun.com/source/819-2384/cam.html
To Change the Backdrop
1. Run xv (version 3.10 or later) on any desired image.
2. Save the file as "XPM". Rename the file from <>.xpm to <>.pm.
3. Edit the file /opt/SUNWut/kiosk/prototypes/dtsession/Dtwm and change
the two backdrop lines to the full pathname of the <>.pm file.
You can also place the <>.pm file in /usr/dt/share/backdrops and then
refer to it by <> in the Dtwm file.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mohamed Ali Bin
Abdullah
Sent: 16 August 2006 13:14
To: [email protected]
Subject: [SunRay-Users] How to set CAM Mode background wallpaper
Importance: High
Dear SunRay Fourm Users,
I need help regarding Sun Ray CAM mode background wallpaper settings.
My objective is that, non-card users( DTUs ) will start the Controlled
Access Mode. In CAM mode i don't want any application to be launch. I
want CAM mode background shows only my wallpaper( jpg format ). Users
with card can access the system( dtlogin ). I have set those policy in
SunRay Web Administration Console and restart the services.
My question is, how can i set or configure the CAM mode background to
show my wallpaper( jpg fornat ) ?
These are my setup environment information:
- Sun E220( Sparc )
- Installed Solaris 10 06/06 OS.
- Installed latest Solaris 10 recommended patches
- SunRay Server Software 3.1
- Installed patch 120879-04
- 2x SunRay 1
- 2x SunRay 150
- 2x SunRay 170
I would be thankful if anyone can offer me help and guidance.
Please let me know if you need any more information.
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.

Hi forum users,
Where can i download or find the "xv" application ?blastwave.org has it for example

How to give Common Background color for all JPanels in My Swing application

Hi All,
I am developing a swing application using The Swing Application Framework(SAF)(JSR 296). I this application i have multiple JPanel's embedded in a JTabbedPane. In this way i have three JTabbedPane embedded in a JFrame.
Now is there any way to set a common background color for the all the JPanel's available in the application??
I have tried using UIManager.put("Panel.background",new Color.PINK);. But it did not work.
Also let me know if SAF has some inbuilt method or way to do this.
Your inputs are valuable.
Thanks in Advance,
Nishanth.C

It is not the fault of NetBeans' GUI builder, JPanels are opaque by default, I mean whether you use Netbeans or not.Thank you!
I stand corrected (which is short for +"I jumped red-eyed on my feet and rushed to create an SSCCE to demonstrate that JPanels are... mmm... oh well, they are opaque by default... ;-[]"+)
NetBeans's definitely innocent then, and indeed using it would be an advantage (ctrl-click all JPanels in a form and edit the common opaque property to false) over manually coding
To handle this it would be better idea to make a subclass of JPanel and override isOpaque() to return false. Then use this 'Trasparent Panel' for all the panels where ever transparency is required.I beg to differ. From a design standpoint, I'd find it terrible (in the pejorative sense of the word) to design a subclass to inconsistently override a getter whereas the standard API already exposes the property (both get and set) for what it's meant: specify whether the panel is opaque.
Leveraging this subclass would mean changing all lines where a would-be-transparent JPanel is currently instantiated, and instantiate the subclass instead.
If you're editing all such lines anyway, you might as well change the explicit new JPanel() for a call to a factory method createTransparentJPanel(); this latter could, at the programmer's discretion, implement transparency whichever way makes the programmer's life easier (subclass if he pleases, although that makes me shudder, or simply call thePanel.setOpaque(false) before returning the panel). That way the "transparency" code is centralized in a single easy to maintain location.
I had to read the code for that latter's UI classes to find out the keys to use (+Panel.background+, Label.foreground, etc.), as I happened to not find this info in an authoritative document - I see that you seem to know thoses keys, may I ask you where you got them from?
One of best utilities I got from this forum, written by camickr makes getting these keys and their values very easy. You can get it from his blog [(->link)|http://tips4java.wordpress.com/2008/10/09/uimanager-defaults/]
Definitely. I bit a pair of knucles off when discovered it monthes after cumbersomely traversing the BasicL&F code...
Still, it is a matter-of-fact approach (and this time I don't mean that to sound pejorative), that works if you can test the result for a given JDK version and L&F, but doesn't guarantee that these keys are there to stand - an observation, but not a specification.
Thanks TBM for highlighting this blog entry, that's the best keys list device I have found so far, but the questions still holds as to what specifies the keys.
Edited by: jduprez on Feb 15, 2010 10:07 AM

Closing the Background report engine

I use a menu that can call several reports, and when they open, the Reports Background Engine runs. I understand why it is useful to keep this open while the main app is on, but it does not close out automatically when the app closes. Is there a command that will do this?
Thanks,
Sara

I Guess,
Add_Parameter(pl_id, 'ORACLE_SHUTDOWN', TEXT_PARAMETER, 'YES') will do (pl_id is the parameter list that you must have created to run each individual report)

Report program when run in background job getting cancelled immediately

Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        IS_LAYOUT         = IS_LAYOUT
        I_SAVE            = 'A'
        IS_VARIANT        = GS_VARIANT
      CHANGING
        IT_FIELDCATALOG   = IT_FIELDCATALOG
        IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani Yeluri

Hi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan.

Layout variant is not working in background in ALV report

Hi,
I have one LAV report to send the report output through mail in foreground and backgroud.Final internal table is having 46 fileds to display the output.But here user is saving the layout variant and sending that layout variant output to mail id in excel format with zip file.Its working in foreground.But in background its not working.Even if we select the layout variant,its sending all the 46 fileds to mail.
here we have used the below FM to update the fieldcat itab.
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
    IMPORTING
      et_fieldcat   = it_fieldcat[]
      es_variant    = v_disvariant
    EXCEPTIONS
      no_infos      = 1
      program_error = 2
      OTHERS        = 3.
In for ground NO_OUT = 'x' for non selected fields and NO_OUT = ' ' for selected fields.
But in background NO_OUT = ' ' for all the fileds, even if we select the layout variant.
Please suggest me with the solution.
Regards,
Jayaram

hi ,
Do according to this
SORT t_ekbe by belnr.
if t_ekbe[] is not initial .
      SELECT MBLNR
        BWART
        SMBLN
        ERFMG   " This is the new added field
        erfme     " This is the new added field
      INTO CORRESPONDING FIELDS OF TABLE t_mseg
    for all entries in t_ekbe
      from mseg
      where mblnr = t_ekbe-belnr
      AND   bwart = '101'.
endif.
after this
loop at t_ekbe .
loop at t_mseg where mblnr = t_ekbe-belnr .
t_ekbe-ERFMG = t_mseg-ERFMG .
t_ekbe-erfme =   t_mseg-erfme .
modify t_ekbe transporting ERFMG erfme .
clear t_mseg .
endloop.
clear t_ekbe .
endloop.
Regards
Deepak .

Problems creating background job for program (job open, submit and close)

Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
       EXPORTING
            stdt_dialog                    = 'Y'
            stdt_input                     = stdt_input
            stdt_opcode                    = 14
       IMPORTING
            stdt_modify_type               = stdt_modify_type
            stdt_output                    = stdt_output
       EXCEPTIONS
            fcal_id_not_defined            = 1
            incomplete_last_startdate      = 2
            incomplete_startdate           = 3
            invalid_dialog_type            = 4
            invalid_eventid                = 5
            invalid_opcode                 = 6
            invalid_opmode_name            = 7
            invalid_periodbehaviour        = 8
            invalid_predecessor_jobname    = 9
            last_startdate_in_the_past     = 10
            no_period_data_given           = 11
            no_startdate_given             = 12
            period_and_predjob_no_way      = 13
            period_too_small_for_limit     = 14
            predecessor_jobname_not_unique = 15
            startdate_interval_too_large   = 16
            startdate_in_the_past          = 17
            startdate_is_a_holiday         = 18
            startdate_out_of_fcal_range    = 19
            stdt_before_holiday_in_past    = 20
            unknown_fcal_error_occured     = 21
            no_workday_nr_given            = 22
            invalid_workday_countdir       = 23
            invalid_workday_nr             = 24
            notbefore_stdt_missing         = 25
            workday_starttime_missing      = 26
            no_eventid_given               = 27
            OTHERS                         = 28.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
               INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            jobname          = jobname
       IMPORTING
            jobcount         = jobcount
       EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
IF sy-subrc <> 0.
    MESSAGE i003(zmapas).
    EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
         VIA JOB jobname NUMBER jobcount
         WITH ano EQ ano
         WITH so_perio IN so_perio
         WITH so_date IN so_date
         WITH so_org EQ so_org
         WITH so_num IN so_num
         AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
    CLEAR job_imediate.
    job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            calendar_id                 = stdt_output-calendarid
            event_id                    = stdt_output-eventid
            event_param                 = stdt_output-eventparm
            event_periodic              = stdt_output-periodic "?
            jobcount                    = jobcount
            jobname                     = jobname
            laststrtdt                  = stdt_output-laststrtdt
            laststrttm                  = stdt_output-laststrttm
            prddays                     = stdt_output-prddays "??
            prdhours                    = stdt_output-prdhours "?
            prdmins                     = stdt_output-prdmins "??
            prdmonths                   = stdt_output-prdmonths
            prdweeks                    = stdt_output-prdweeks "?
            predjob_checkstat           = stdt_output-checkstat
            pred_jobcount               = stdt_output-predjobcnt
            pred_jobname                = stdt_output-predjob
            sdlstrtdt                   = stdt_output-sdlstrtdt
            sdlstrttm                   = stdt_output-sdlstrttm
            strtimmed                   = job_imediate
            targetsystem                = stdt_output-instname
            start_on_workday_not_before = stdt_output-notbefore
            start_on_workday_nr         = stdt_output-wdayno
            workday_count_direction     = stdt_output-wdaycdir
       IMPORTING
            job_was_released            = job_release
       EXCEPTIONS
            cant_start_immediate        = 1
            invalid_startdate           = 2
            jobname_missing             = 3
            job_close_failed            = 4
            job_nosteps                 = 5
            job_notex                   = 6
            lock_failed                 = 7
            OTHERS                      = 8.
IF sy-subrc <> 0.
    MESSAGE i003(zmapas).
    EXIT.
ELSE.
    MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João Martins

Hello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
      EXPORTING
           jobname          = w_jobname
      IMPORTING
           jobcount         = w_jobcount
      EXCEPTIONS
           cant_create_job = 1
           invalid_job_data = 2
           jobname_missing = 3
           OTHERS           = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
   VIA JOB w_jobname NUMBER w_jobcount
   AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
   EXPORTING
      jobcount           = w_jobcount
      jobname           = w_jobname
      sdlstrtdt            = sy-datum
      sdlstrttm           = l_hora
      targetserver       = w_servidor
   IMPORTING
      job_was_released     = l_liberado
   EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      OTHERS               = 8.
Regards.
Valter Oliveira.

Background jobs

Hi,
We can schedule the programs or transactions in background through SM36 and we can see the status through SM37.Then what is the use of FM's JOb_open,Job_submit and Job_close.When we will use these FM's.
Can anybody tell me the difference between these two methods for scheduling the jobs in background....with sample code if possible
Thanks & Regards,
Rakesh.

hi,
chk this,
call funcatio.
****Open a job to submit the Post Program into
call function 'JOB_OPEN'
exporting
jobname = jobname
importing
jobcount = jobcount
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if sy-subrc 0.
raise job_open_failed.
endif.
submit zefu_currency_load_callbak_ack
via job jobname
number jobcount
with com_num = com_num
with relay_nu = relay_num
and return.
if sy-subrc 0.
raise job_step_failed.
endif.
****Close the Job and start it immediately
call function 'JOB_CLOSE'
exporting
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if sy-subrc 0.
raise job_close_failed.
endif.
Also,
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
You can also use the fun modules JOB_OPEN,JOB_CLOSE etc for job
scheduling.
hope this helps.
regs,
hema.

Running a report in Background

Hi Guys,
I am designing a ALV report.
This report have option in the selection screen, to run immediately or Background.
I am using JOB_OPEN, JOB_SUBMIT and JOB_CLOSE FM's.
My doubt is at which point I have to use these FM's.
Immediately in START-OF-SELECTION ?
If this is the case, I can write rest of my code after JOB_CLOSE FM.. Right ?.
Thanks

Hi Naresh,
Thanks for the reply.
My doubt is, can I use these FM's in the report itself, or I have to write separate program for this ?
If I can use in the same report, where exactly i can use it.
For example.
I have form to print ALV - GENERATE_ALV and send email - SEND_MAIL.
do I use like this.
start-of-selection.
JOB_OPEN..
JOB_SUBMIT..
JOB_CLOSE..
GENERATE_ALV
SEND_MAIL
Thanks

Background schedule

dear experts,
i am using these code to schedule a program to run in background
export 'value' to memory id 'table'.
call function job_open.
submit 'zprogram' via job job_name number job_number and return.
call function job_close.
in program 'zprogram' i have used the syntax
import so_input from memory id 'table'.
in event initialization.
but i thin data is not importing in called program using import statement. can anyone suggest me how to schedule it properly.
is there any problem in my code??
Edited by: shekharamit on Jul 20, 2010 6:53 AM

Your export statement:
export 'value' to memory id 'table'.
and your IMPORT statement:
import so_input from memory id 'table'.
Don't you think there is definitely some problem with this. Read the F1 help & figure it out yourself.
BR,
Suhas

To delay a program submitted in background from another transaction.

Hi All,
There are 2 programs 'A' and 'B' . During execution of 'A' , 'B' is called and submitted in background using FM Job_open & Job_close and submit query.
My requirement is to Delay the Program 'B' by 2-3 mins without delaying Program 'A' .
I tried using FM JOB_OPEN export condition sdlstrttm   = w_starttm but was of no help.
I also tried using statement wait up to 120 seconds but this also makes wait to program 'A'.
Please suggest solutions to this.
Regards,
Nibha

Hi Prashant,
I am not able to understand ur suggestion.
My piece of code is
    call function 'JOB_OPEN'
      exporting
        jobname          = 'YI90C_BG'
       sdlstrtdt        = w_startdt
       sdlstrttm        = w_starttm
      importing
        jobcount         = job_count
      exceptions
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        others           = 4.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    if sy-subrc = 0.
      submit ympic_source_list_contr_upload
      with selection-table it_selcr
      and return
      via job 'YI90C_BG'
      number job_count.
      if sy-subrc = 0.
        call function 'JOB_CLOSE'
          exporting
            jobcount             = job_count
            jobname              = 'YI90C_BG'
            strtimmed            = 'X'
          importing
            job_was_released     = w_status
          exceptions
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            others               = 8.
      endif.
    endif.
Please tell what changes should I make?
Regards,
Nibha

Scheduling one background job inside another

Hi All,
Is it possible to Scheduling one background job inside another.? i.e In my Z program I am calling job_open, job_submit, job_close and to execute one standard report in background. And after that I am executing my Z program itself from SE38 as Program->Execute->Background->Execute Immediately. Is this logically correct? I am asking this because I am not getting the desired result
Thanks & Regards,
Neethu.

HI,
Check the job steps in SM36.
First schedule the Standard job and in the job steps schedule the z report.
Schedule job in chain

Background in SM37

Hi all,
I am trying to create a background job in a program using FMs JOB_OPEN,JOB_SUBMIT .... and dont want the job to be executed immediately , but the user should go to SM37 and schedule the job for the job name created by the above program.
How do i achieve this. PLs help with your ideas.
Thanks,
Stock

stock sys,
Scheduling Background Jobs:
1.        Background jobs are scheduled by Basis administrators using transaction SM36.
2.        To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3.        While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a.        Time of printing: set to Send to SAP spooler Only for now
b.        Name abbreviated name to identify the job output
c.        Title free form description for the report output
d.        Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e.        Department set to appropriate department/functional area name. This field can be used in
a search later.
f.        Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1.        To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2.        To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3.        Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1.        Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1.        A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2.        The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3.        The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a.        Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b.        Date created to find an output of a job that ran within a certain date range.
c.        Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d.        Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4.        Upon entering selection criteria, the user clicks the Execute button   to
retrieve the list of matching spool requests.
5.        From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a.        Click the Print button   to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b.        Click the Print with changed attributed button   to print the spool request
with the different attributes (e.g. changing the printer name).
c.        Click the Display contents button   to preview the spool request contents. A
Print    and Download   functions are available from the preview mode.
Don't forget to reward if useful

Background Job pass value

Hi, I am calling a Background job in my program. I am using JOB_OPEN, JOB_SUBMIT and JOB_CLOSE FM to start a job. My need is to pass a value to the job program(job program doesnt have any selection screen values). Is their any way without creating variants each time to pass value to it.
Please advice.....

Hello,
You can first use JOB_OPEN which returns job number. Then build ranges or parameters to use SUBMIT to call the program.
Eg: SUBMIT RM06BB20 AND RETURN
      WITH S_EKGRP IN R_EKGRP
      WITH S_EKORG IN R_EKORG
      WITH S_FLIEF IN R_FLIEF
      WITH S_KONNR IN R_KONNR
      USER sy-uname VIA JOB w_jobname
      NUMBER w_job_number.
Now use JOB_CLOSE.
Thanks,
Venu

Background job - not sure if its executed in BG

Hi,
I wanted to submit my program in background and have used
Job_open, Job_sumbit, Job_close FM's.
I have passed following parameters.
Job_open - jobgroup, jobname,sy-datum, sy-timlo
job_submit- sy-uname, jobcount,jobname,sy-langu, sy-repid
Joc_close-jobcount,jobname,sy-datum,sy-timlo.
My program doesn't show any error.
But I am not sure if it's really executing in background....how to find out?
I have checked in SM37 and my
duration time is 0
delay time is 25 secs
status - released
startdate & time is empty.
Does this mean it never ran in background?
Plz help

Hei ....
After passing immediate start in job_close.....
In SM37 i have
Status as : canceled.
have start time
have start date.
duration as 567
delay as 60 secs.
which is better that what i have done previously....Now i get the duration time, start date, start time.
How can i escape from "canceled"?
thanks

Dtlogin background

Similar Messages

Maybe you are looking for