DTM does not open after installation on VISTA

I am a new BB user, have tried installing the DTM on my HP Machine which has a vista home basic version of windows. I am sure ist a vista problem since it works well with another machine where windows 7 is installed.
the installation has no problems , it all goes thru perfectly. When i try to run the dtm software it says " BlackBerry Desktop Software has stopped working" and then closes down.
Please help with a solution
Thanks

Hey anilsagarwal,
Welcome to the BlackBerry Support Community Forums.
If you try to open the BlackBerry Desktop Software using a different user does the issue persist?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Adobe Premiere Elements does not open after installation

Hello,
I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
I hope you can help me out!
Thanks!
Inge

Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
The Photoshop Elements worked.
I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
thanks
Inge

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

Digital Editions 4.0 will not open after installation on Windows XP laptop.

Digital Editions 4.0 will not open after installation on Windows XP laptop. DigitalEditions 3.0 installs and opens fine. Have tried 4.0 several times. Removed 3.0 and 4.0, reboot, reinstall 4.0 still will not open. Error message says Windows has experienced and problem and requires that Digital Editions must be shut down.

Solved my own problem. It was necessary to delete all instances of Adobe Digital Editions in programs and the registry. After doing so and reinstalling 4.02...., it became available in the "open with" dialogue box and became the default epub reader.

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

Why Netflix does not open after the new 7.0 update?

WHY Netflix does not open after the new update 7.9?

Vincent149 wrote:
I went to At&t yesterday, they said you have to call Apple support! Which im gong to try today since no one on here has posted anything back! Im frustrated! Maybe its there way of selling new phone!!!!
These are user to user forums. You are not addressing Apple by posting here. If some other person has a solutoin for you, then they will post it.

I downloaded fire fox and installed but its not opening after installation

I downloaded fire fox and installed but its not opening after installation. So what should i do?

Hi, tiger's iphone.
Thank you for visiting Apple Support Communities.
Here are the best troubleshooting resources to go through when experiencing issues updating your iOS device over-the-air.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Resolve issues with an over-the-air iOS update
http://support.apple.com/kb/TS4431
You can also update this iPad via iTunes on a computer as an alternative.
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Cheers,
Jason H.

Is the apple website not opening after installation of mountain lion?

is the apple website not opening after installation of mountain lion? because after i updated from lion, apple's webpage is like not opening from any browser..even from safari..

And other websites work? Do you mean http://apple.com, or a specific page within their website? The main page loads fine for me.

Grey Window - Does not open after Running a Form

Hello!
I have the following problem:
I just installed Oracle 9i-Developer Suite.
After installing it, I wanted to run a form (also made in Forms 9i).
So, I selected one form , connected to the database and Run it.
The first time, a dialog appeared informing me i need to instal Jinitiator1.3.1.9.
So, I installed JInitiator and Run the form again.
The result is that it does not open. It seems to be blocked.A grey window apppears and that is all. After some minutes (about 30 minutes after), 2 error messages appear:
1.FRM-92101 : A Failure has occured on the Server. you will need to reestablish your session.
2.FRM-92050 : Failed to connect to the Server. /forms 90/190servlet -1
Please tell me what to do next to run this form (or any other form).
If an aplication is runned, and it uses Jinitiator 1.3.1.13 everything seems to be ok.

If you are getting the applet background (usually gray or tan colored), it means the http listener (oc4j) is likely already running. This is confirmed by the request to install jinitiator. If the listener was not running, neither of these events would occur.
Before going to far, I have to ask.... do you know how old 9i is? Also, "9i" could possibly be one of two versions 9iR1 = Forms 6.0.8 and 9iR2 = Forms 9.0.2. Both of these versions were desupported long ago. This is important to know for several reasons.
1. Even if you actually have a valid support contract with Oracle, they will not be able to offer much assistance as Support is not able to report new bugs against these versions and in some cases, can no longer refer you to documentation as some of it has already been obsoleted.
2. Because these versions are so old, they will not likely run on newer operating systems. For example if you are using Vista, Win7, Win2008, etc, Jinitiator will not run on these platforms. Since neither of these Forms versions was certified for use with any of the JRE versions that were supported on these newer operating systems, the only solution that makes sense would be to upgrade the Forms version.
Apparently, you partially see the problem as you indicated that it works when using JInit 1.3.1.13. Even this version is very old. In general, Jinitiator is no longer supported either, but the latest and last version is 1.3.1.30. So you can see that the latest version is many releases newer than .13. If you are not using one of the platforms I mentioned above, you may have more luck with a newer jinit version. You can download 1.3.1.30 from MyOracleSupport using Patch ID 7410076. If you do not have access to MOS, you may be temporarily out of luck as these files are currently not available on OTN although may return once the recent migration has been completed.
Regarding the errors you noted:
FRM-92101 generally indicates that the runtime (ifweb90.exe) was not able to start or crashed after it was started.
FRM-92050 generally means there was a problem with the url or the related session ID or header info. This can occur if your machine is not properly configured in DNS, as well as many other possible causes. Assuming you are using the Forms Builder to run your forms, try changing the url from the host name to "localhost". In other words:
http://localhost:<port number>/forms90/f90servlet
Regardless, upgrading will be you first best action.

Firefox does not open after first try

When i click on firefox, it does not open. After Several times trying, it might open. Sometimes I have to click open new tabs to open this. Why is this happening?

Hi,
You can try to right-click and Unpin the icon from the taskbar and then Pin it back from the Firefox [http://kb.mozillazine.org/Installation_directory installation directory], usually C:\Program Files (x86)\Mozilla Firefox\.
Another possible reason could be that the installed security software is delaying the start (McAfee??). You can try to fully trust Firefox and its related processes/files in the different McAfee configuration areas (e.g. process/sub process control, file modification, HIPS etc.). You can also try to disconnect the internet connection, temporarily disable McAfee, restart the computer and check.
[http://kb.mozillazine.org/Firewalls#Firewall_pitfalls Pitfalls]
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuring AV/Firewalls]
[https://support.mozilla.org/en-US/kb/Firewalls AV/Firewalls configuration]

Mini Bridge does not open after installing 8.0.2 upgrade

I installed InDesign CS6 upgrade 8.0.2. Now I cannot open Mini Bridge.
If Bridge is not already open,
     - selecting File | Browse in Bridge... or clicking on the Bridge button: Bridge opens - good!
     - control-click on the Bridge button: I get a Reset Settings error dialog - NOT good! I cancelled this and Bridge opened fullscreen okay.
     - alt-click on the Bridge button: Two Bridge applications opened fullscreen! - NOT good!
     - shift-click on the Bridge button: Bridge opens, but Mini Bridge does not! - NOT good!
If Bridge is already open,
     - selecting File | Browse in Bridge... or clicking on the Bridge button: the ruler bars dim and nothing else happens! - NOT good!
     - control-click on the Bridge button: Bridge opens maximized! - good!
     - alt-click on the Bridge button: the already opened Bridge, plus a new Bridge, both open! - is this normal?
     - shift-click on the Bridge button: the ruler bars dim and Mini Bridge does not open! - NOT good!
My main concern is that I cannot get Mini Bridge to open at all. I can ignore the other problems mentioned above, if I can just get Mini Bridge to open.
I have restored my C: drive from backup twice and tried the upgrade a total of three times. The results are the same each time.
Does anyone have any idea what is causing my problem and how I might correct it? I am running 64-bit Windows 7 Professional SP1, 3.40 GHz Intel Core i7-3770 CPU, 32.0 GB installed memory.
Thanks greatly,
Mark.

Hi Peter,
Just to bring you up to speed on what has happened to this issue, none of the suggestions that I received in the Bridge forum helped. However, after restoring my C: drive back to prior to my updating attempts, I was able to successfully upgrade InDesign in Safe Mode (this is a Windows startup mode that blocks non-Microsoft applications from starting up on reboot). Mini Bridge is now working correctly.
Thank you again for your assistance.

Hp scanner software does not open after installing 10.4.8

Your help, please...since installing OS 10.4.8 my HP scanner software (5370c) does not open. It appears to begin opening and the icon appears briefly on the Dock, but does not stay there.
Also, the keyboard does not light up in low-light conditions as it did previously. Yes, I have the box checked in the keyboard section of system preferences. (It is a brand new keyboard, recently replaced, but the lighting worked under OS 10.3.9.
Any ideas?
Thanks for your help,
Dean

yes, it seems to almost complete the installation and then tells me that I do not have the right permissions.

FMLE 3 and 3.1 does not open at all in vista

Hi,
Adobe FMLE 3 and 3.1 does not start at all in vista. Its a 32-bit machine. 512MB RAM. Can anyone give me some clues?
Thanks

It happend to me to on windows 7, when I exchange Black magic car with Ospray. After I uninstalled drivers for black magic, FMLE started fine.

Mail does not open after IPhoto compose.

I want to email photos from IPhoto 7.1.3
I hit the email button, make the appropiate choices, hit the compose button.
The application prepares the photos for email and then... nothing.
The mail application (3.2) does not open on a new message page with photos attached.
Does anyone have any suggestions?

Welcome to the Apple Discussions. If resetting the email preferences to Mail try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Launch iPhoto and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Itunes does not open after an update

I was prompted by itunes for an update and i did. Now Itunes does not open. it say "itunes library itl file cannot be found or created. The default location for this file is in the itunes folder in the Music folder. Has anyone else encounter this problem. thanks

Worked for me. Could not uninstall Apple Mobile Device but continued in this order. Rebooted and reinstalled iTunes.
All of my Library was restored.
Running Vista Ultimate.

DTM does not open after installation on VISTA

Similar Messages

Maybe you are looking for