DTMF Isn't Working When a Call is Placed Outbound from UCCX

I have a script that places an outbound call and when the caller answers the call, I do a get digit string to capture caller input and the DTMF isn't working. The caller is hearing "Are you there?".
Here is the call flow:
Http Trigger into a script
Script places an outbound call using the Place Call command
The call gets answered.
Using the Get Digit String command, the caller hears the prompt that is played with get digit string.
The caller presses keys, but no keys are accepted.
Caller hears "Are you still there" and timesout.
I believe this was working at one time, but the script wasn't used and now we are revisiting this script.
I am using a H.323 gateway. IP phones using the same gateway to reach the PSTN do not have problems with DTMF. Inbound calls to the UCCX script are working when calling into a script with a Menu step.
Your help is appreciated.
Thanks.

You are exactly right. I was hitting DP 0 since during the cut I adding a ^ in front of my voip dial-peer pointing to the CUCM cluster. Once I waited to the call volume went down, after 9pm, I was able to do a debug voip dialpeer and I was able to see that the inbound dial-peer was matching.
Thanks for your reply.

Similar Messages

  • My FaceTime isn't working, when I call someone, they do not receive the invitation.

    I call someone on FaceTime
    and they never receive any notice that I called at all. In this case, they can never answer. Please help me

    Hello I Like iPAd,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with FaceTime on your iPad, please follow the steps in the article linked to below.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Take care,
    Alex H.

  • When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

    When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
    If I use google it works. If I use Ichat, it works. If I use skype it works.

    This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
    Try turning down the speak volume (System Preferences->Sound->Output->Output Volume)  or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

  • My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    HI there,
    Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
    http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
    If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
    Hope this helps
    Scott

  • ROUND(date) isn't working when TypeMode=1

    Hi,
    We've noticed that the round (date) expression isn't working when TypeMode=1.
    TT version - 7.0.3
    Command> SELECT ROUND (DATE '2007-08-25','YEAR') FROM Dual;
    2817: Invalid data type DATE for argument 1 for function ROUND
    Is it the expected behaivor?
    Thanks.

    Hi Susan,
    Does that mean, i cant use LEFT,RIGHT,DATE_GMT in the ttIsql queries.
    Actually i need to modify the existing code, so that the new code picks data from timesten.
    The existing code uses LEFT,RIGHT,DATE_GMT etc in the SQL queries.
    Do you mean that i need to modify the SDQL queries.
    Please reply urgently
    Thanks a lot!

  • Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

    microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

    Try this:
    1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
    2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
    3. If the issue persists, Your iPhone need repair.

  • I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

    Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
    Thank you
    Guy Deschenes
    Shawinigan (QC) Canada

    Hi Eric,
    Here's how a similar problem was resolved between PS and BR.
    The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
    I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
    Please try the installation, and let me know whether it works. Thanks!
    It woks just fine since I unistalled and reinstalled PS 2014.
    Guy
    Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
    I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
    created by ericboerner in Bridge General Discussion - View the full discussion
    I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
    You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer

    It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
    Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.

    This Apple Tech Note explains the process:
    http://support.apple.com/kb/ht1848
    It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items.

  • DLL Wrapper works when functions called out of main(), not from elsewhere?

    Hello all,
    I am currently trying the JSAsio wrapper out ( http://sourceforge.net/projects/jsasio )
    Support on this project is nearly unexisting and a lot of people seem to complain that it doesn't work well.
    It works very nicely here, I wrote a few test classes which called some functions (like playing a sound or recording it) and had no problems whatsoever.
    These test classes were all static functions and ran straight out of the main() method and printed some results to the console.
         public static void main(String[] args)
              boolean result = callFunction();
              .. end..
         public static boolean callFunction()
              initASIO();
              openASIOLine();
              return true;
         }The results were all great!
    Then I tried to implement these test classes into my swing-based applications. So I want to call these same functions, as in the test classes, as a result of any user action (for example, selecting the asio driver in a combobox) But then these asio driver functions just stop to work. I get errors saying that the ASIO driver is not available. (meaning that the dll wrapper loads the wrong asio driver or can't load one at all)
    The library path and classpath are all set correctly, exactly the same as the test classes. Even copied the test code word for word in to my swing applications but it still will not work. I am calling these functions in a new Thread, and even put them in a static methods to try and get that working. When calling these asio methods from the main() method AFTER I set up my components gives me the desired results as well. But as soon as I call these same methods (which are in the same class) from a swing event, it fails;
    public class ASIOTest
         public static void main(String[] args)
              ASIOTest test = new ASIOTest();
              test.callFunction(); // <-- WORKS
         public ASIOTest()
              initializeComponents();
         private void initializeComponents()
              frame = new JFrame();
              choices = new JComboBox();
              choices.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent event)
                     // user made selection
                    new Thread(
                            new Runnable() {
                                public void run() {
                                    try
                                         callFunction(); // <-- DOES NOT WORK
                                    catch (Exception e)
                                        e.printStackTrace();
                            }).start();
         public void callFunction()
              initASIO();
              openASIOLine();
    }Is there something fundamental I am missing here?
    For what reasons can an application which uses JNI functions go wrong when working in a swing enviroment? (and out of a static context, although this does not seem to make any difference, eg. when calling these functions from static methods inside another class, inside a new thread when the user has generated an event)
    I am hoping someone could point me in the right direction :-)
    Thank you in advance,
    Steven
    Edited by: dekoffie on Apr 21, 2009 11:11 AM
    Edited by: dekoffie on Apr 21, 2009 11:16 AM

    jschell wrote:
    Two applications.
    And you probably run them two different ways.
    The environment is different so one works and the other doesn't.Thank you for your fast reply!
    Well, I am running the "updated" version from the same environment; I copied the jframe, and a jcombobox into my original test class which only ran in the java console. Consider my second code example in my original post as the "updated" version of the first code example. And as I pointed out, it works fine when I call the jni functions in the main method, but not when I call it from inside the ActionListener.
    Or am I again missing something essential by what you mean with a different environment? The classpath and the working directory is exactly the same, as is the Djava.library.path option. :-)
    Thanks again!

  • Flex: Method doesn't work when being called on parentDocument

    Hi,
    I wonder is anyone can look at this code and tell me why calling the  removeSelectedChild works when called from the same document, but  returns the following error when called from the child  document/component.
    "ArgumentError: Error #2025: The supplied DisplayObject must be a  child of the caller."
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" >
      <mx:Accordion id="myAccordion"
      width="100%" height="100%"
      selectedIndex="0">
      <mx:Script>
        <![CDATA[
          public function removeSelectedChild():void {
            myAccordion.removeChild(myAccordion.selectedChild);
        ]]>
      </mx:Script>
      <mx:headerRenderer>
        <mx:Component>
          <mx:Button click="{ parentDocument.removeSelectedChild() }" />
        </mx:Component>
      </mx:headerRenderer>
      <mx:HBox>
        <mx:Button click="{ removeSelectedChild() }" />
      </mx:HBox>
      </mx:Accordion>
    </mx:Application>
    Clicking on the button in the child produces the expected result,  whilst clicking on the header throws an error despite the fact they both  call exactly the same method.
    Sorry that the example is a little contrived, this problem arose in a  quite complicated view, which was using all kinds of custom components.  This was the only way I could display it in a way that will be quick  for you to compile and easy to focus on the real issue without  background noise.
    I'm pulling my hair out on this one and would really appreciate it if  anyone could help.
    Cheers,
    Chris

    What are you trying to remove?
    myAccordion.removeChild(myAccordion.selectedChild);
    tries to remove the container, which is the child of the Accordion. Is that what you want?
    Also, I'm wondering if  parentDocument.removeSelectedChild() would try to remove the Accordion.
    If this post answers your question or helps, please mark it as such.
    Greg Lafrance - Flex 2 and 3 ACE certified
    www.ChikaraDev.com
    Flex Training and Support Services

  • NO SOUND ON DV6, BUT STRANGELY WORKS WHEN SKYPE CALLS ARE ON

    Hi,
    I have gone tried many of the things that were provided in these forums but nothing has helped so far. There is no playback from the speakers, so I assumed the speakers were dead and started using external speakers, but strangely the playback started working when I made a skype call.
    Any sounds played from media players, websites or any other source work properly when a skype call is being made.
    As soon as the call is disconnected, everything stops.
    What is the skype call triggering that enables the audio to play.
    I have uninstalled/reinstalled IDT drivers, tried all sorts of configuration settings, but nothing has worked so far.
    What is the problem here and how can it be fixed???
    Please help!!

    Hi,
    I have gone tried many of the things that were provided in these forums but nothing has helped so far. There is no playback from the speakers, so I assumed the speakers were dead and started using external speakers, but strangely the playback started working when I made a skype call.
    Any sounds played from media players, websites or any other source work properly when a skype call is being made.
    As soon as the call is disconnected, everything stops.
    What is the skype call triggering that enables the audio to play.
    I have uninstalled/reinstalled IDT drivers, tried all sorts of configuration settings, but nothing has worked so far.
    What is the problem here and how can it be fixed???
    Please help!!

  • IPhone speaker does not work when switching call to hands free option

    having problems with IPhone speaker, not working when switching phone calls to speaker mode, any suggestion?

    Same problem - I was on the phone last night and the speaker switched off and can't figure out what happened. I tried to reset the phone, no sound is working.  I can hear a phone call if I hold it up to my ear. Very frustrating as my phone is less than 3 months old. Tracy

  • I just got my iphone and everything seems to work until i try to call someone. They cant hear me. When i face time the mic works and the speaker works for the voice memo but it doesnt work when i call out. i tried resetting should i try restoring?

    i just got my iphone 4 and it seems to work well expect when i call out. the other party cant hear me at all...if i face time the mic works and if i use the voice memo it works as well. idk what to do. i reset the phone should i try restoring it again?

    I've got the same issue. It just stopped working today. Kinda upset

  • Lock sound isn't working when I slide to unlock iPhone5 after iOS 7 upgrade

    I just installed iOS 7 (which I now regret doing)...I now notice that the lock sound doesnt work when I "swipe" like it did prior to the iOS 7 upgrade. I checked my Settings/Sounds and the Lock Sounds is set to ON. When I "swipe" (slide to unlock), it unlocks the phone but it does this silently. I've shut the phone off, turned back on(rebooted) but nothing changes. Is this normal now with iOS 7? If so, why do we even have an unlock sound option in the Settings? Does anyone know how to get this fixed. I enjoyed hearing the unlock "click" sound prior to iOS 7.

    I have an iPhone 5 and an iPad Mini, but I only had the problem on the iPad Mini but this fix may work for you.
    This is what I posted in another thread:
    I HAVE FIGURED OUT THE FIX FOR THIS! ... (Well it worked for me on my iPad Mini.)
    I saw a post from an apple rep telling a iOS 6 user to turn the side switch on to un-mute the sounds. A no-brainier yes, but it made me wonder if the side switch may have been temporarily "confused" after updating to iOS 7 because it added the new settings screen that swipes up from the bottom of the screen. I was using my side-switch to lock the screen rotation and it was in the "off" (down) position (red visible) and none of my notifications were sounding. So I flipped it up and down a couple times which didn't solve the problem. So logically, I proceeded to what inevitably solved the problem...
    Go to Settings > General / "Use Side Switch To" and select the opposite of what you are currently using. I had mine on Lock Rotation, so I selected Mute. Then flip your switch up and down slowly a couple of times to see that the confirmation on the screen is correct.  You may have to go back to settings again and select the other choice if you originally had Mute selected, I don't know because I originally had Lock Rotation in use.
    Hopefully, this will fix your notification sounds (and the lock sound when you press the power button).  After using this fix, you can set the use of the side switch to your preference and still have all of your notification sounds!

  • HT2731 My iTunes account isn't working when I select none is says to contact iTunes support

    My iTunes account is not working when I select none can u help me

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

Maybe you are looking for