DTP are inactive after System copy

Hi Guys!!!
I have done a system copy from one sbox another. After that all the DTP are inactive after System copy.
Please help me in this regard.
Thanks in advance
Peter..

Hi,
If u copy the transformation get inactive, bcoz it has changed from existing target to new target.
so need to activate all.
Hope it helps u,
Thanks

Similar Messages

Transformation inactive after system copy in SCM system

Hi Team,
I am posting this in BW keeping in mind that i am receiving issues in RSA1 transaction in my SCM system after the recent system copy. We did the system copy of SCM system and DTP conversion was also done using program RSBKDTP_BDLS. No errors occurred while the program ran. Now we have handed the system back to users for checking and they have reported an error saying there were some transformations missing in the system while checking the DTP . I went to RSA1 transaction in my SCM system and searched for the DTP and status seems to be in inactive status. I then clicked on change button and an error message mentioning the below appears.
Transformation XXXXXXXXXXXXXXXXXXXXXXXX inactive; action cannot be executed
Message no. RSBK260
Diagnosis
A transformation (XXXXXXXXXXXXXXXXXXXXXXXX) used by the DTP is inactive.
System Response
The action (request processing or DTP maintenance) was terminated.
Procedure
Activate the transformation. It connects the source XXXXXXXX XXXCLNT100 to the target XXXXXXXX.
I checked for the transformation entry in the table RSTRAN and did not find the same. Also i ran the program RSDG_TRFN_ACTIVATE to activate the transformation but nothing happens.
Have anyone came across this type of issue. I need some advise on the same and guide me in case if i am missing something, since i have not worked on this type of issue before.
Thanks for your help in advance.
Rajesh

Hi,
Due to the system copy we always get this issues.
Just ask your basis team to check source system assignments. they can do it.its their activity.
at BW Server, RSA1 -->menu tools--> manage source system, check the source system. same need to have at below we20.
at Tx - WE20, Partner type Ls---> under this you may see your target(SCM) and source system anmes. select source name and rigth side panel partner status need be active A.
At quality syste, activations thru program may not be happen. better to re-transport the dtp from dev system.
Thanks

Logical System Name after System Copy

Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
Keishi

Hi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit.

User password problem in RFC after system copy

HEllo,
we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
Have you an idea to reimport succesfully these informations ?
Thanks
lionel

Hello,
We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
This are exactly way we perform it:
Before restoring DB :
export table via R3trans for tables:
RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
export users via scc8
Restore DB, truncate upper rfc tables, import rfc Tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
Import Users via transport generated by scc8
run scc7 as post actions
Tuncatate/re-import rfc tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
What else could be done ?
We have a lot of RFC. so re-enter all password is really a hudge task ..
Thanks a lot for help

Cube is still assigned to original system after system copy

Hello Experts,
After system copy (BW and ECC), some cubes are still assigned to the original system.
Displaying the flow, the cube is assigned to the new system and the original one and the error message RSAR203 "Source system & (old one) does not exist" is araised.
I see that RFC connexion with original system are still in the system (were not deleted by basis team).
I have this problem only for cubes.
Any idea how can i fix this issue?
Thank you in advance.
Edited by: SALHI Amal on Oct 13, 2011 11:37 AM

HI,
You can try the tcode 'bdls'. in this tcode you copy all tables to new source system.
Regards,
AleX

Errors after system copy ...

Dear all,
envi---         AIX 5.3 & oracle 10.2 -
ECC 6.0SR1    ABAP ........only
I have restored a backup of PRD to QAS successfully ... for system copy...
I have created ops$ users with following statments..
create user ops$qlyadm identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( sidadm)
create user ops$oraqly identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( orasid )
Successfully created control file & managed to take the database up...
Enter user-name: / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1728053248 bytes
Fixed Size                  2071840 bytes
Variable Size             872415968 bytes
Database Buffers          838860800 bytes
Redo Buffers               14704640 bytes
Database mounted.
Database opened.
SQL>
after the following action when i tried to startsap. with user sidadm the following is the message..
Checking QLY Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
Start of saposcol failed
Running /usr/sap/QLY/SYS/exe/run/startdb
Trying to start QLY database ...
Log file: /home/qlyadm/startdb.log
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
athomedev:qlyadm 26>
As a result when i checked startdb.log the following is the message.......
Fri May 29 16:03:32 IST 2009
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 29 16:03:32 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-10997: another startup/shutdown operation of this instance inprogress
ORA-09967: unable to create or open lock file
IBM AIX RISC System/6000 Error: 13: Permission denied
Disconnected
Fri May 29 16:03:32 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
Request to advice me on the following & also advice me the way i created ops$ users is that right way or not..
rgds,
rahul...
Edited by: Rahul on May 29, 2009 4:21 PM

Dear all,
thanx for sharing,, I have actually odnea mistake after system copy. I tried to make the system up with out creating ops$ suer.
I have followed notes
361641 Creating OPS$ users on UNIX & created ops$ created ops$ user with automated script & from attchment provided in Note 50088 - Creating OPS$ users on Windows NT/Oracle
after that
alter sytem sapr3 account unlock;
system is up & runnig.
regards
ravi kiran

How to find old hostname remained in new system after system copy

Hello all,
Let me ask you about changing hostname during system copy.
I've finished homogeneous system copy. I changed its hostname and did not change its SID.
I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname.
But my customer also used hostname for variant. I overlooked.
Then they require me to provide how to find old hostname in whole system ...
Do you have any good tools or idea? Any advice would be appreciated.
Best regards,
Ikue

Hi,
If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
Regards,
Varadharajan M

BDC programs affected after system copy.

Dear All,
We are facing a problem after system copy with regards to the HR module.
Client have created a BDC programs and it was running fine in the old server.
After the system refresh, one of the BDC is having problem and following is the brief,
1. While running a user transaction in FOREGROUND, the program is running correctly and in BACKGROUND the program is calling some other action which is not recorded in the BDC. One observation was made that, while running in DEBUG mode, with the background option, the program runs correctly.
2. In program we are calling 2 PA40 actions, whose sequence no. are 28 and 61 resp. In background mode the program calling some other PA40 action whose seq no is 22.
Is there anything we are missing in the profile or some settings in the applications to run the BDC program correctly?
Regards
Pras

No, I haven't run that transaction.
I have checked the old server, and the logical system is PRDCABS500 and the same is present in the new system.
But I am amaze that the other BDC's are working fine, just 1-2 bdc are having problems?
I have checked BD54 in new system its still showing the old..
What do you recommend and when should this activity to be done( I information says that no users should be present?).
Edited by: Prashant Dhas on Jun 13, 2008 7:05 AM

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Trasformations and DTP are decactivating after adding some NAV in cube

Hello Experts
Trasformations and DTP are decactivating after adding some NAV in cube and activating it.
I knew that it is normal but activating all the DTP's and Transformations is painfull work, would like to just know whether there is any programme to activate the dependent objects!!!

yes, thats right. A stupid job.
in my last project I created 3 multicubes, 14 infocubes and 23 dso's.
-> 1 change in the data modell and you must reactivate 20 objects.
I wrote a ABAP program to activate
- datasources
- transformations
- DTP's
- update roules and
- multicubes.
It's very nive. So simple now, to make a change.
I select
- a object or
- or an infoarea
- and the program search all objects in the dataflow.
I have two modes
- to display all objects
- and activate the inactive objects.
They are many tasks, where I think a tool can help me to increase my development performance. But I don't have enough time.
Sven

Accounting document not copied after system copy.

Hi,
We copied the production system into our test system using backup/restore. In the post copy verification, our CO team complained because they could not see the "accounting documents".
What do you think happened why the accounting document was not copied?
thanks
krbas

Hi Krbas,
Make sure you did all the post processing activities after system copy. I doubt you missed some post processing activities related to CO after your system copy.
regards,
VInodh.

J2ee engine does not start up after system copy

Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
        at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
        at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
        at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
        at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
        at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
Tajinder

Hi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments   :
    arg[00] : jcontrol
    arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    arg[02] : -DSAPSTART=1
    arg[03] : -DCONNECT_PORT=64380
    arg[04] : -DLISTEN_PORT=64381
    arg[05] : -DSAPSYSTEM=00
    arg[06] : -DSAPSYSTEMNAME=BD1
    arg[07] : -DSAPMYNAME=BWQAS_BD1_00
    arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    arg[09] : -DFRFC_FALLBACK=ON
    arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host    : BWQAS
-> ms port    : 3601
-> OS libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : BWQAS
-> ms port    : 3601
-> os libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm                  : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
        Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name       : bootstrap
-> node type       : bootstrap
-> java path       : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type    : <default>
-> java vm cpu     : ppc64
-> heap size       : 512M
-> root path       : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path      : ./bootstrap/launcher.jar
-> OS libs path    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class      : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable      : yes
-> debug mode      : no
-> debug port      : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder

Problem with extractors after system copy

Hi Gurus!
After system copy I have problem with export data source from infocubes. Logical system name was converted with BDLS. When I check any export datasource (8*) with transaction RSA3 system tell me that no data records was found though data in fact table every infocube exist (in SE11). What can I do to solve this problem?
Thanx.

Hi,
Of course I tried reactivate myself source system but problem is still here. When I check extractor (with RSA3) of any data source of any infoobject (master data) - everything is OK. When I check extractor for export data sorce - I have problem.
to Mickael: In modeling every thing is OK.
Thank you for all answers.....

License Error after system copy

Hi,
     After system copy licensing the sap giving this error.
MLICHECK0 in *LIBL type *FILE not found.
MLICHECK__0 in *LIBL type *FILE not found.
MLICHECK~I1 in *LIBL type *FILE not found.
MLICHECK in R3BDDDATA type *FILE already exists.
Alternative name for file MLIC0002 not allowed.
"MLICHECK~0" in R3BDDDATA type *FILE already exists.
Help me to solve the issue.
Thanks and Regards
G Singh

Hi G Singh,
this error message "smells" extremly like RCLSTG *DBXREF !
If this problem is still your pronblem, I would run this command - in restricted mode - takes only about 30-60 minutes ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Post processing after system copy from standalone to cluster enviornment

Hi,
I have done a system copy(Backup restore method) from a standalone quality BW (QBW) system to cluster environment (TBW).
The steps I have followed as follows.
. setup the machines in the cluster environment ( Windows 2003 EE server,sql 2005 SP3)
. Backup the current database in the source system
. Given a different SID (TBW) during the System copy installation .its a dual stack installation.
. Restore the database in the target system and select the back up restore method during the system copy database installation step.
.The installation completed successfully and i m having some doubts regarding the post processing steps after this .
We want to retain the same client in the target system ,for this i need to rename the logical name .Kindly assist me for changing the logical name for the extraction of BW delta process from extraction server to BW system and also the other steps I have to follow after system copy.
Thanks
Arun Padikkal

Hi Arun,
You should probably post this question in a basis forum.
Cheers,
Diego

DTP are inactive after System copy

Similar Messages

Maybe you are looking for